Need help. first time posting
i was updating my iphone and it came unplugged,so then i had to restore it. After the restore all my numbers were gone. is there anyway i can get them back? ANY help will be greatly appreciated.
thanks for any help.
OPEESE wrote:
i was updating my iphone and it came unplugged,so then i had to restore it. After the restore all my numbers were gone. is there anyway i can get them back? ANY help will be greatly appreciated.
See if you can find them in your PC, likely somewhere in 'MyDocuments'. If they are there (e.g., a prior backup version) you can probably put them somewhere that can be found by iTunes. Otherwise ...
Phil
Similar Messages
-
Hi I need help first time here converting a file
Hi I need help first time here converting a file
Thank you for your subscription to our service. Please see below.
How to convert your file to PDF file:
Using Adobe Reader:
Launch Adobe Reader X or Reader XI
Select “Tools” and click “Sign In” link to sign in with your Adobe ID and password
Select “Create PDF” then click “Select File” button
Click “Convert” after select your file
Click “Download Converted File” link to download the file to your computer after the process is completed.
Using Web UI
Log into https://createpdf.acrobat.com/signin.html with your Adobe ID and password
Select “Convert to PDF”
Click “Select Files” button then choose your file Click “Download” button in the progress bar after completion of the process to download the PDF file to your computer.
Converted PDF files are stored at https://files.acrobat.com and you can log in with your Adobe ID and password. You can share your files with others or download them to your computer.
Please let me know if you have further questions.
Hisami -
Newbie needs help - First time using Premier Pro 5.5.2
I have Premier Pro CS 5.5.2 install on iMac 2011 with Lion 10.7.3. I imported an AVCHD clip from a SDHC card using a usb card reader. The clips were really choppy and pixelated. The clip was shorted in 1920 x 1080 HA. I have been reading from the Adobe site and their Videos. I should have no problem importing AVCHD into Premier Pro. Do I need 3rd party conversion software to convert the clip to Quicktime or what specific settings should I be using? Any suggestion would be appreciated.
With so many features that cannot be disabled, Premiere Pro requires significantly more horsepower than that iMac can deliver. FCP X also requires a decent amount of system horsepower as well. iMovie doesn't require much due to its relative lack of features.
And as I stated a few times, the iMacs are designed for convenience/looks first, low power consumption second, performance third. In fact, although they use desktop CPUs, the 2011 lineup uses mostly reduced-power versions of the i5 and i7 CPUs (in this case, the "S" variant of these CPUs with their lower 65W TDP instead of the normal 95W TDP). And their minuscule interior space meant laptop-class GPUs instead of desktop-class GPUs. In the end, you'd end up with a very large system that performs no faster than a decent laptop (in fact, the laptop HD 6770M is slower than the desktop HD 6770 (which is in reality a tweaked HD 5770) in games). Worse, unless you can find a Thunderbolt external hard drive for that iMac, you're effectively stuck with a single physical hard drive for absolutely everything, especially since both Firewire 800 and USB 2.0 (the other ports available on the iMac) are much, much slower than SATA. -
Hi, My first time posting. Have been going in circles and need some help. Started with not being able to find my memory stick, didn't show up on desktop. Think I found a way in but the main problem right now is I cannot find Preferences. All posts I have checked say to go to Finder and click on Preferences, but it is not there. Can anyone help. Thanks
You have to click on the word "Finder" in the menu bar. (If you do not see the word click anywhere on the desktop.) When you do that you will see a list of options. In the list, click on Preferences. Another pane will open.
Now click General (on the top row), then select everything by clicking on all the boxes in the section "Show these items on the desktop:"
Close this pane. -
i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
Need to reset security q/a, don't remember the answer. Need for App store first time purchase on ipad2.
Alternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
How to Manage your Apple ID: Manage My Apple ID -
Need Help on HTTP Post ?
Hi @,
I need to perform HTTP Post from webdypro application some XML data. How can I do this , I tried searching forums and blogs but couldn't find a suitable solution or Help.
Is it possible or will have to go for any external apis to achieve the same?
RegardsHi,
This is possible - though not directly with Exit Plug of Interface View Controller.
You need to use Suspend plug to pass parameters with http POST. See this thread and this document for further directions.
From thread above, Replace
Map postParams = new HashMap();
postParams.put("Key1", "Value 1");
postParams.put("Key2", "Value2");
postParams.put("Key3", "Value 3");
wdThis.wdGetWDSuspendResumeWindowController().wdFirePlugTestSupend("http://www.sap.com", postParams);
with
WDDeployableObjectPart deployableObjectPart = WDDeployableObject.getDeployableObjectPart(deployableObjectName, "TargetApp", DDeployableObjectPartType.APPLICATION);
String urlToTargetApp = WDURLGenerator.getApplicationURL(deployableObjectPart);
Map postParams = new HashMap();
postParams.put("Key1", "Value1");
postParams.put("Key2", "Value2");
postParams.put("Key3", "Value 3");
wdThis.wdGetStartWindowController().wdFirePlugStartAppSuspend(urlToTargetApp, postParams);
In target application, onPlugDefault, use this code to get the values for parameters.
String val1 = WDProtocolAdapter.getProtocolAdapter().getRequestParameter("Key1");
String val2 = WDProtocolAdapter.getProtocolAdapter().getRequestParameter("Key2");
String val3 = WDProtocolAdapter.getProtocolAdapter().getRequestParameter("Key3");
wdComponentAPI.getMessageManager().reportSuccess(val1 + " - " + val2+ " - " + val3);
I've used this and it works.
Hope it helps.
Regards,
Sunaina Reddy T -
need help. Before I set up my I-pad i need to regain access to my I-Tunes account, easy enough. The problem is I cannot re-set password. I have tried to re-set and send to my designated email but it does not work. How can i get someone from Apple on the phone to help?
Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them. -
I need some help. first time mac user.
I have an airport express unit that I want to set up through a laptop using windows xp, and I want to be able to connect to the internet wirelessly through my new macbook pro. Please help me.
Hello
Try This:
1. Download Airport Setup for Windows and Install (v5.3.1.9)
http://www.apple.com/support/downloads/airportutility531forwindows.html
2. Connect your DSL or cable modem to the Ethernet port on your AirPort Express.
3. Open AirPort Utility, select your AirPort Express, and click Continue.
4. Follow the on screen directions
5. If you have a cable modem which is also used for a phone line, you might have a problem with the cable modem assigning a valid DHCP number. This happened to me and unplugging the modem does no good because it has a battery. If this is your case, you will have to unplug the cable modem and remove the battery, then replace the battery, hook back to the Airport express and plug back in.
6. If none of these things help, then post back and I'll see if I can help you figure it out.
Dr. P -
Please help me solve this CS5 issue - I am a first time poster, but long time user
While in the middle of producing a rather large website, I get this error every time I open a file in Dreamweaver CS5 and I cannot preview file using the "Preview/Debug in browser" button.
Error:
---- While executing onLoad in_onOpen.htm, the following JavaScript error(s) occurred. In file "_onOpen": onOpen is not defined ------
In addition, Dreamweaver will not let me use/choose/open the file. Browser preferences keep resetting.
I went on the other forums and the solution points to removal of
<user>/Library/Application Support/Adobe/Dreamweaver CS5/en_US/Configuration/MacFileCache-XXXXXXX.dat
file is suggested, but I have not such file on my Mac OS X Version 10.7.3. I get as far as Library/Application Support/Adobe.
In fact I don't even see Dreamweaver on the list. (see attached.)
Thanks for any guidance - LaurenWell there is a library folder in your user account but by default it's hidden in 10.7. It's a very common folder so you should either unhide it or know how to access it, for instance by doing a Go To Folder in the finder and opening "~/Library". http://kb2.adobe.com/cps/909/cpsid_90947.html
-
Help with export speed - First time poster - please be gentle!!
Hi all,
Currently an i5 win 7 with 4gig ram (work PC!!!)
Using Ppro 8.1.0 (81)
As a company we have upgraded from CS6 to CC in the last month
I have played around an everything is looks fine, but I have a 40 second video containing 4 After Effect comps fully rendered sitting on my Ppro timeline. I go to export and choose h2.264 720p 25 as I would have done in CS6 and the estimated file size is 48meg, So I'm thinking that will be a quick render.
At the moment the estimated time reads 2 hours and 7 mins and is climbing!!
What am I doing wrong? I usually export to this setting and a 4 min video on the same machine using CS6 used to take about 45 mins
Thanks in advance, I have looked through the forums, but don't know much about the ins and outs of hardware acceleration or even know where to find it!!
AndyHi all,
Currently an i5 win 7 with 4gig ram (work PC!!!)
Using Ppro 8.1.0 (81)
As a company we have upgraded from CS6 to CC in the last month
I have played around an everything is looks fine, but I have a 40 second video containing 4 After Effect comps fully rendered sitting on my Ppro timeline. I go to export and choose h2.264 720p 25 as I would have done in CS6 and the estimated file size is 48meg, So I'm thinking that will be a quick render.
At the moment the estimated time reads 2 hours and 7 mins and is climbing!!
What am I doing wrong? I usually export to this setting and a 4 min video on the same machine using CS6 used to take about 45 mins
Thanks in advance, I have looked through the forums, but don't know much about the ins and outs of hardware acceleration or even know where to find it!!
Andy -
Any ideas
Leave the iPhone alone for a minute and go to your PC/Mac. Try and set up the Apple ID on there (again leaving the iPhone to sit and look pretty for a while). Check your emails (not on the iPhone) and see if you are receiving the email into your inbox that way, if you aren't make sure you have put the correct email address in the App store. If you are definitley sure you are putting the correct email address in go to the web interface for your email provider (e.g. hotmail or yahoo) and check the junk mail folders etc.
Do all the above whilst the iPhone is sat around, don't do any of the above on the iPhone. If you manage to crack it and get the email address verified and your account up and running just log in to the App Store on your iPhone once it's all done -
NEED HELP WITH TIME CAPSULE!
Hello, I am new to this forum and this is my first post. Currently I have a Macbook pro and it is really the only computer in my house I use. My Mom has a Macbook, My dad has a Apple Desktop and my brother a toshiba laptop.
I am running OS X 10.5.8 on my macbook pro, Snow Leopard on the other.
Tonight I got the time capsule, and I am really excited to get this working. To give a little background, I have FiOS and our modem is in the basement which runs directly to a verizon wireless router, MI424WR to be exact. I have a few questions about how to set it up because I tried to set it up like they said but when I plugged the Time Capsule into the Fios router and turned it on all I got on the Capsule was the blinking amber light. I ran an ethernet cord from one of the opened LAN ports on the router to the WAN port on the Capsule. I installed the Airport utility on my macbook and my dads desktop but still do not get any type of connection to the capsule. I am reading about bridging so I tried to do the manual set up in the Airport utility it just scanned and got nothing and I cannot even hit manual setup. My questions are..
How exactly do I set up the Time Capsule, as I described it does it sound like I have everything plugged in correctly?
Is it possible to completely get rid of the verizon router?
How do I get any of my computers to pick up the time capsule?
If you have any questions as to how I explained please just ask. I am really trying to get this set up because I do not want my dad to think he wasted 350 dollars on something that is completely useless for our home setup. Any help would be greatly appreciated. THANK YOU, Zach.No matter what, even when the TC is plugged into my MBP with an ethernet cable it does not read it.
Disconnect any ethernet cables that you connected to the Time Capsule at the moment
Hold in the reset button on the back until the amber light begins to blink more quickly and continue holding the button another 4-5 seconds when this occurs. Then release the reset button.
Connect an ethernet cable from one of the available LAN <-> ports on the Verizon router to the WAN (circle of dots icon) port on the Time Capsule.
You have two ways to configure the Time Capsule using either wireless or ethernet.
To use wireless, click on the fan shaped Airport icon at the top of the computer screen and look for a wireless network with a name like Apple Network xxxxxx. Log on to that network first, then open AirPort Utility.
To use ethernet, temporarily connect an ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule. Open AirPort Utility.
When you open AirPort Utility, click Continue to follow the guided setup. You did not indicate whether you want to Time Capsule to provide a wireless network, but most users want that option. So, you when asked how you want to configure the Time Capsule, you would choose the "Create a new wireless network" option.
As the Jolly Giant says, you will need to choose Bridge Mode when you see a choice of how to connect in the setup process. If you are an experienced computer user, you may want to configure the Time Capsule manually, but I would not recommend that you do this unless you know exactly what you are doing.
My next step is to call verizon and say they need to get out here and fix this ** or I will be going back to comcast.
Verizon has nothing to do with the Time Capsule problems that you have encountered. Blaming them will accomplish nothing. -
Need help understanding Time Capsule file structure and how to get it back
I have the original Time Capsule on which I backup both my Mac Pro and my wife’s Macbook. When Snow Leopard came out, I successfully used the ‘Restore from Time Machine’ feature on my Mac Pro so I know it has worked. However, my wife’s MacBook harddrive died the other day and I was trying to do the ‘Restore from Time Machine’ and all it would find was a backup from April (when I put her in a new larger drive). Time Machine would not find any backup files newer that April. She stated that she had seen the the Time Machine backup notices regularly and as recent as the day the haddrive died (Nov. 23) so I figured that I should have no problem. Here is what I have found in my trouble shooting and what leads to my questions below.
This is the file structure I found: (note that our ID’s are ‘Denise’ and ‘John’)
*Time Capsule* (the drive as listed in my Finder window sidebar under ‘shared’)
>Folder called ‘Time Capsule’ (when logged in as either ‘Denise’ or ‘John’)
>>Denise Sparsebundle
>>>Backup of Denise’s iBook (mounted image)
>>>>Folder called ‘Backups.backupdb’
>>>>>Folder called ‘Denise’s iBook
>>>>>>Single folder with old April backup (not the right files)
>>John Sparsebundle
>>>Backup of John’s Mac Pro (mounted image)
>>>>Folder called ‘Backups.backupdb’
>>>>>Folder called ‘John’s Mac Pro’
>>>>>>Folders containing all my backup files
>Folder Called ‘Denise’ (if logged as ‘Denise’)
>>Denise’s Sparsebundle (a disk image)
>>>Backup of Denise iBook (the mounted image. Name from old machine)
>>>>Backups.Backupdb
>>>>>Denise’s iBook (Contains the backup I need)
>Folder Called ‘John’ (if logged in as ‘John’)
>> (empty)
For some reason, my wife’s backup files are stored within a folder located at the top level of the Time Capsule drive called ‘Denise’, however, mine are within a folder called ‘Time Capsule’ which is at the same level as the ‘Denise’ folder.
For some reason, when trying to use Time Machine to recover, it bypasses the top level ‘Denise’ folder which contains the correct files and goes into the ‘Time Capsule’ folder and finds the outdated backup files.
I would assume that both my backup files and my wife’s should be at the same level of the Time Capsule.
I was eventually able to use Migration Assistant to recover the files after installing a fresh OS and mounting the correct Sparsebundle image.
So, my question, how do I get this fixed so that if I have to recover a drive with Time Capsule, it will find the correct files.
Sorry for the long post and thanks in advance for any help.John Ormsby wrote:
What I was trying to determine is why different backups for one particular machine are located at different file structure levels on my Time Capsule and why the most resent one for that machine is at a different level that for my other machine. Also, what is the correct level that both machines backups should be at.
well John, first can you clarify if you are on 10.4.8 as your profile suggests ? if so, i'm wondering how you can use TM at all because TM was introduced with Leo. if you're not on 10.4.8, please update your profile. if you could, please also indicate details of your machine such as available RAM, processor, etc.
second, what OS is your wife's machine running ?
third, i frankly don't know too much about TM's file structure or if there indeed is such a thing as the correct one. however, i do know that it is best to leave TM to do its thing (as long as it's working). FWIW, though off-topic, you may want to have a look at this read for further information.
last but not least, i see TM backups to my TC only as a part of my backup strategy. the backbone of my strategy is to create bootable clone of my startup disk(s) using e.g. Carbon Copy Cloner on a regular basis. while TM is capable of doing a full system restore, i don't trust it as much as a working clone. i use TM to retrieve a file i accidentally trashed a week ago but you cannot boot from a TM backup if your startup disk goes belly up.
If I have missed this information in either the FAQs or the Troubleshooting article, I would greatly appreciate being pointed to it .
i expect you didn't miss anything and i'm sorry you didn't find any help there. perhaps if Pondini (author of the FAQ and troubleshooting user tips) reads this thread, you will get the necessary advice on the file structure and more besides.
good luck to you ! -
Hello everyone. I am sorry we have the get acquainted this way but I am having some issues and this is one of my last options of getting help. Allow me to explain the problem. When viewing a file under 100% zoom, everything looks jagged like the anti aliasing is missing. Once I zoom in to 100%, everything looks the way it should. The saved file ( jpeg format for instance) is okay. I can zoom out and it still looks true to the image. The problem is related to photoshop. I installed my latest GPU drivers twice just to be sure and it was not from that. This problem started last night and I don`t quite know how to solve it. If I work on small resolution images, it isn`t such a bad problem because I will be working on 100% zoom, but I am working on high resolution images/ paintings. Somewhere around 8000x5000 pixels thus, working at 100% is not that doable. I attached an image that shows this issue. The one on the right is the zoomed out version and the one on the left is the zoomed in version. Yes, the noise is affected by this, badly, but this started last night. up until then everything looked good even with noise or an out of this world sharpness. I can`t imagine what I could have done to trigger this.
This being said, I am at the mercy of the more knowledgeable folks from around here. I do hope I posted this question in the right section. This is my first post here so sorry if I messed something up. Looking forward to your replies.Here is a simplistic view that I feel may help you understand reality.
The only time you're looking at your image pixels in Photoshop is when you're zoomed in to 100%, There your look at the actual image pixels Photoshop has for your image at your displays resolution.
At any other zoom level you are looking a scaled image that has more or less pixels than your actual image these too are displayed at your display resolution.
The scaling done by Photoshop is done for displaying your image is done for good performance not for the best image quality a quick interpolation. Therefore at some zoom levels image quality looks poorer than at other zoom levels.
High resolution Display have now add a new wrinkle. User interfaces were designed for displays with resolutions around 100 PPI elements like text, icon, and other things like checkboxes, buttons etc. were created so there size would be useable are this more or less fixed 100 PPI resolution. While Photoshop was designed to scale your images so you can work well on it is was not designed with a scalable UI. Photoshop can not scale its user interface independently from its image display display window for you displays high resolution. Photoshop's Image display area has the same resolution as the rest of Photoshop User Interface. Just like there is only one resolution in all layers in a document. CC 2014 2xUI changes that. PS UI is scaled to 1/2 resolution the image Area is at the displays actual resolution.
Photoshop CC 2014 2x UI scales all of Photoshop User Interface including the image display to 200% which is 1/2 your display resolution effectively cutting you display pixel count to 1/4 its actual pixel count. Your once again running on a low resolution display. If your display has a native resolution 200 PPI you're running it at 100 ppi if your display has a 300 PPI resolution you're running it at 150ppi. Which defeats the reason of having high resolution. Which is you would like to be able to edit your images at print resolution. Adobe cc2x UI scales the UI but not the image window soa inage is 216ppi on the Surface Pro 3 the UI is large and dpoes not fit. screen
To be able to edit your images at print resolution you need a display the has a print resolution and you need and application the can scale its image display and its UI independently.
Current there is no OS interface for having multiple resolutions areas on a display and applications like Photoshop can not scale UI and Image independently. OS and Photoshop can scale what is displayed. Adobe Photoshop executable is coded in a way that it tell Microsoft Windows OS that it will handle display scaling so it can using your displays native resolution. Currently Only Photoshop CC 2014 Provides you with the option of running you display at half resolution.
Windows can scale you display to many resolution and as several presets. like 100%, 125%, 150% and like Adobe 200% half resolution. You can make a Windows Registry and add an External Photoshop Manifest file the tell's Microsoft Windows to handle display scaling. I have a Microsoft Surface Pro 3 m windows machine. Its LCD has a 216PPI resolution. Windows 8.1 had 4 preset for scaling its LCD.
Surface Pro 3 LCD Display 12" IPS display 3:2 aspect ratio 9.984603532054124" Wide, 6.656402354702749" High 216.3330765278394 PPI
Microsoft Preset Display scaling
100% 2160x1440 216 PPI
125% 1728x1152 173 PPI
150% 1440x960 144 PPI SP3 Default setting
200% 1080x720 108 PPI
Most user these days has 1024x768 or better displays and Web pages are often authored for 800x600 pixels pages. So the give you a better handle on Resolution and scaling I have edit a 800x600 document with 25x25 px grid one my Surface pro 3
using Windows 4 scaling presets and captured the 2160x1140 scaled screens Only at the 100% preset does the image window have a 216ppi Also note @ 2x UI Photoshop UI doe not fit on screen
Adobe Photoshop CC 2014 2xUI Scales the UI to a display 1/2 resolution but does not scale the Image area uses actual screen resolution. Photoshop Help system info show the screen i 1/2 resilution 1080x720 but scalet the imase to the real resolution 2160x1440. however the image window is the 216ppi the ui 108ppi via scaling
Maybe you are looking for
-
Oracle taking 100% CPU usage
Hi, I have a situation. I am trying to execute a big query by involving 3 tables (joins). The query is taking about 20 minutes time to execute. While the query is executing the CPU usage for ORACLE is 100%. Please put somelight on this as of to why t
-
Why find my frends app keep using GPS even if the app is terminated?
Hi, I have the GPS icon (the one with the empy arrow) constanty on in the top right of the iphone. Disabling locations services, i found that is the "find my frined" app. Even if the app it's closed and terminated by multitasking, the arrow stays the
-
Hi, I am trying to set up the start time at 0:00. I have changed the value in every possible place, restart the program and create new document. Does anyone know the way to do it? Thanks. W.
-
Pixeled when in catalogue view
Hi, sometimes pictures turn up "pixeled" and unsharp when browsing in calalogue view. Most of the time one can see while iPhoto is sharpening the picture up while reading it in to th memory, but from time to time it stays unsharp. If I then open up t
-
I intended to buy new mac pro, is it better to wait for new OS X moutain or can buy it now and update it later as it will not affect its performance???