Need help in query

Hi All,
I have to develop a report for vendor evaluation.
fields are like this: Vendor, Average price,total supply,rejected, accepted, price rating
Formula for price rating is :Price Rating = If Price of a Vendor for a material is lowest than weightage= 40
SecondLowestVendorforamaterial = WeightageofFirstLowest Vendor - (Avg.PriceofSecondVendor u2013
Avg.priceofFirst Vendor) / Avg.Priceoffirst vendor ) *100
Can anybody tell me how to implement this whole scenerio ???
Regards
Shweta
Edited by: Arun Varadarajan on Apr 10, 2009 6:22 PM

Hi,
I hope there are Two main Formulas you are looking.
1.Formula for price rating is :Price Rating = If Price of a Vendor for a material is lowest than weightage=
    40
2.SecondLowestVendorforamaterial = WeightageofFirstLowest Vendor - (Avg.PriceofSecondVendor u2013
    Avg.priceofFirst Vendor) / Avg.Priceoffirst vendor ) *100
Please divide the formulas into small formulas and then implement.
Price Rating = If Price of a Vendor for a material is lowest than weightage= 40
You need to create Formula for weightage.
SecondLowestVendorforamaterial = WeightageofFirstLowest Vendor - (Avg.PriceofSecondVendor
u2013     Avg.priceofFirst Vendor) / Avg.Priceoffirst vendor ) *100
First calculate Avg.PriceofSecondVendor
                      Avg.priceofFirst Vendor
in separate formulas and then use in another formula to get required result.
Thanks
Reddy
Edited by: Arun Varadarajan on Apr 10, 2009 6:22 PM

Similar Messages

Need Help to query Lync Database for User Information

Need Help to Query the lync database to retrieve below user information.
1. SIP Address of the registered user
2. Phone Number configured to the particular account.
3. IP Address
4. Last Logged in time.
I am trying to pull the above information from rtc database for all the registered users. Please let me know if this is possible and it would be great if you can throw some light on what tables to look for the data. Thank You.

Hi,
For SIP address and Phone number you can check RTC database.
IP Address:
You can refer to the link below to query IP address:
http://h30499.www3.hp.com/t5/Business-Service-Management-BAC/Monitoring-Lync-with-the-User-Registrations-Viewer-Free-NMC-tool/ba-p/5961497#.UtOU43mIrwo
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Last Logged in time:
You can refer to the link below:
http://blogs.technet.com/b/dodeitte/archive/2011/05/11/how-to-get-the-last-time-a-user-registered-with-a-front-end.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Need help with Query

Hi,
Good day everyone! I need help writing a query. I have this table with the following data in them...
ACCT_CODE FSYR      YTD_AMT
A123            11          100
A456            11          200
A123            10          50
A456            10          100I want the output to look like this:
ACCT_CODE     CURRENT_YEAR(11)       PRIOR_YEAR(10)
A123               100                              50
A456               200                              100The user will input the fiscal year and based on that input, I want to get the prior year value as well.
Thank you for all your help!!
Edited by: user5737516 on Jun 29, 2011 6:48 AM
Edited by: user5737516 on Jun 29, 2011 6:50 AM

user5737516 wrote:
Hi,
Good day everyone! I need help writing a query. I have this table with the following data in them...
ACCT_CODE FSYR YTD_AMT
A123 11 100
A456 11 200
A123 10 50
A456 10 100
I want the output to look like this:
ACCT_CODE CURRENT_YEAR PRIOR_YEAR
A123 100 50
A456 200 100
The user will input the fiscal year and based on that input, I want to get the prior year value as well.
Thank you for all your help!!what is prior year?

Need help in query tuning

Hi All,
In my application I have 3 tables. Event(1.2 L records), KeyWord(1K records) and Event_KeyWord_Mapping(1.4 L records) table.
In my query i need to sort the Events table by 3 columns -( 1 Date column and 2 String column) and i am interested only in top 40 records.
Below is the example query.
select
    from
        (    select
                  a.*,
            ROWNUM
        from
            (    select
                distinct event_id
            from
                (     select
                    (this_.EVENT_ID),
                    this_.EVENT_GMT_DATE ,
                    this_.PRIORITY
                from
                    EVENTS this_,
                    event_keyword_mapping ekp
                where
                    this_.EVENT_ID = ekp.event_id
                    AND ekp.keyword_id IN (
                        1643,2278,24,1090,2422,401 )
                    AND (
                            EVENT_CODE = 'IEP'
                            AND (
                                IS_SCALL = 'Y'
                                AND COUNTRY_DISPLAY IN (
                                    'US','CA','UK','BE','FR','DE','IT','JP','AU','CH','EU'
                    OR (
                            EVENT_CODE = 'ICC'
                            AND IS_GTINDEX = 'Y'
                    AND FX_EVENT = 'N'
                    AND EVENT_GMT_DATE BETWEEN to_date('12/27/2011 05:14:00','mm/dd/yyyy HH24:MI:SS')and
to_date('03/27/2012 10:28:44','mm/dd/yyyy HH24:MI:SS')
                ORDER BY
                    EVENT_GMT_DATE ASC ,
                    PRIORITY ASC ,
                    EVENT_ID ASC )) a
            where
                ROWNUM<=41)(1643,2278,24,1090,2422,401) keywords have 90K+ mappings.
Below is the explain plan for the above query.
| Id | Operation                               | Name                           | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                        |                                |    41 | 1066 |       |   629K (85)| 02:05:51 |
|   1 | VIEW                                   |                                |    41 | 1066 |       |   629K (85)| 02:05:51 |
|* 2 |   COUNT STOPKEY                         |                                |       |       |       |            |          |
|   3 |    VIEW                                 |                                | 25738 |   326K|       |   629K (85)| 02:05:51 |
|* 4 |     SORT GROUP BY STOPKEY               |                                | 25738 |   955K| 6929M|   629K (2)| 02:05:51 |
|   5 |      CONCATENATION                      |                                |       |       |       |            |          |
|   6 |       MERGE JOIN CARTESIAN              |                                |   150M| 5463M|       | 96245   (2)| 00:19:15 |
|   7 |        TABLE ACCESS BY INDEX ROWID      | EVENTS                         | 1132 | 32828 |       | 1618   (1)| 00:00:20 |
|   8 |         BITMAP CONVERSION TO ROWIDS     |                                |       |       |       |            |          |
|   9 |          BITMAP AND                     |                                |       |       |       |            |          |
| 10 |           BITMAP CONVERSION FROM ROWIDS |                                |       |       |       |            |          |
| 11 |            SORT ORDER BY                |                                |       |       |       |            |          |
|* 12 |             INDEX RANGE SCAN            | EVT_PRIORITY_GMT_DATE_ID_INDEX | 30402 |       |       |    68   (0)| 00:00:01 |
| 13 |           BITMAP CONVERSION FROM ROWIDS |                                |       |       |       |            |          |
|* 14 |            INDEX RANGE SCAN             | EVENT_CODE_INDEX               | 30402 |       |       |    79   (0)| 00:00:01 |
| 15 |           BITMAP CONVERSION FROM ROWIDS |                                |       |       |       |            |          |
|* 16 |            INDEX RANGE SCAN             | FX_EVENT_INDEX                 | 30402 |       |       |   102   (1)| 00:00:02 |
| 17 |           BITMAP CONVERSION FROM ROWIDS |                                |       |       |       |            |          |
|* 18 |            INDEX RANGE SCAN             | IS_GTINDEX_INDEX               | 30402 |       |       |   102   (1)| 00:00:02 |
| 19 |        BUFFER SORT                      |                                |   133K| 1170K|       | 94627   (2)| 00:18:56 |
| 20 |         TABLE ACCESS FULL               | EVENT_KEYWORD_MAPPING          |   133K| 1170K|       |    84   (3)| 00:00:02 |
|* 21 |       HASH JOIN                         |                                | 6691 |   248K|       | 2489   (1)| 00:00:30 |
|* 22 |        TABLE ACCESS BY INDEX ROWID      | EVENTS                         | 1937 | 56173 |       | 2401   (1)| 00:00:29 |
| 23 |         BITMAP CONVERSION TO ROWIDS     |                                |       |       |       |            |          |
| 24 |          BITMAP AND                     |                                |       |       |       |            |          |
| 25 |           BITMAP OR                     |                                |       |       |       |            |          |
| 26 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 27 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 28 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 29 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 30 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 31 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 32 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 33 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 34 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 35 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 36 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 37 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 38 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 39 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 40 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 41 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 42 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 43 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 44 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 45 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 46 |            BITMAP CONVERSION FROM ROWIDS|                                |       |       |       |            |          |
|* 47 |             INDEX RANGE SCAN            | COUNTRY_DISPLAY_INDEX          | 30402 |       |       |     3   (0)| 00:00:01 |
| 48 |           BITMAP CONVERSION FROM ROWIDS |                                |       |       |       |            |          |
|* 49 |            INDEX RANGE SCAN             | EVENT_CODE_INDEX               | 30402 |       |       |    79   (0)| 00:00:01 |
| 50 |           BITMAP CONVERSION FROM ROWIDS |                                |       |       |       |            |          |
|* 51 |            INDEX RANGE SCAN             | IS_SCALL_INDEX                 | 30402 |       |       |   100   (1)| 00:00:02 |
|* 52 |        TABLE ACCESS FULL                | EVENT_KEYWORD_MAPPING          | 88609 |   778K|       |    87   (4)| 00:00:02 |
Predicate Information (identified by operation id):
   2 - filter(ROWNUM<=41)
   4 - filter(ROWNUM<=41)
12 - access("EVENT_GMT_DATE">=TO_DATE(' 2011-12-27 05:14:00', 'syyyy-mm-dd hh24:mi:ss') AND "EVENT_GMT_DATE"<=TO_DATE('
              2012-03-27 10:28:44', 'syyyy-mm-dd hh24:mi:ss'))
       filter("EVENT_GMT_DATE"<=TO_DATE(' 2012-03-27 10:28:44', 'syyyy-mm-dd hh24:mi:ss') AND "EVENT_GMT_DATE">=TO_DATE('
              2011-12-27 05:14:00', 'syyyy-mm-dd hh24:mi:ss'))
14 - access("EVENT_CODE"='ICC')
16 - access("FX_EVENT"='N')
18 - access("IS_GTINDEX"='Y')
21 - access("THIS_"."EVENT_ID"="EKP"."EVENT_ID")
22 - filter(LNNVL("EVENT_CODE"='ICC') OR LNNVL("IS_GTINDEX"='Y') OR LNNVL("FX_EVENT"='N') OR
              LNNVL("EVENT_GMT_DATE">=TO_DATE(' 2011-12-27 05:14:00', 'syyyy-mm-dd hh24:mi:ss')) OR LNNVL("EVENT_GMT_DATE"<=TO_DATE('
              2012-03-27 10:28:44', 'syyyy-mm-dd hh24:mi:ss')))
27 - access("COUNTRY_DISPLAY"='AU')
29 - access("COUNTRY_DISPLAY"='BE')
31 - access("COUNTRY_DISPLAY"='CA')
33 - access("COUNTRY_DISPLAY"='CH')
35 - access("COUNTRY_DISPLAY"='DE')
37 - access("COUNTRY_DISPLAY"='EU')
39 - access("COUNTRY_DISPLAY"='FR')
41 - access("COUNTRY_DISPLAY"='IT')
43 - access("COUNTRY_DISPLAY"='JP')
45 - access("COUNTRY_DISPLAY"='UK')
47 - access("COUNTRY_DISPLAY"='US')
49 - access("EVENT_CODE"='IEP')
51 - access("IS_SCALL"='Y')
52 - filter("EKP"."KEYWORD_ID"=24 OR "EKP"."KEYWORD_ID"=401 OR "EKP"."KEYWORD_ID"=1090 OR "EKP"."KEYWORD_ID"=1643 OR
              "EKP"."KEYWORD_ID"=2278 OR "EKP"."KEYWORD_ID"=2422)                                                                                                                                                                                                                                           When the above query is executed its taking around 10 seconds to return the data.
I am using- Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
I need help in bringing down the query execution time.
Thanks,
Girish G

A few questions:
1. Are any indexes available on the Event_KeyWord_Mapping table?
2. What does '1.4 L records' mean? Not familiar with 'L'.
3. Are the statistics up to date for the tables and indexes involved?
4. Are EVENT_ID and KEYWORD_ID the only columns accessed from the Event_KeyWord_Mapping table?
Assuming the above then DarkStargate's suggestion is on point.
But you should add the KEYWORD_ID column to the index as well since that is what the index records are filtered on.
AND ekp.keyword_id IN (
                        1643,2278,24,1090,2422,401 )Be sure that index statistics are collected; they will provide Oracle with data about the distribution of KEYWORD_ID values.
This will allow Oracle to get the required information from the index without accessing the Event_KeyWord_Mapping table itself.

Need help in query to have all items in sap with PO data on order, date

Hello Everyone,
I need some help in writing a query to show all items in sap db to have itemcode, itemname, onhand, sellable(onhand-committed), on order, and the delivery date when that time should be received. I need to know what items are regular items, which ones are master and components. For the master I need to have the deliver date of the PO for the component.
I have written this.
SELECT DISTINCT TOP (100) PERCENT T1.ItemCode, SUM(T1.Sellable) AS Sellable, T1.OnOrder, MAX(T1.Docduedate) AS DeliveryDate, T1.WhsCode
FROM         (SELECT     ItemCode, Sellable, OnOrder, '1/1/1900' AS Docduedate, WhsCode
                       FROM          dbo.V_RAZ_StoreInv
                       UNION ALL
                       SELECT     TOP (100) PERCENT ItemCode, '0' AS Sellable, Quantity AS Onorder, DocDueDate, WhsCode
                       FROM         dbo.V_RAZ_OPENPOSDATA
                       ORDER BY ItemCode) AS T1 LEFT OUTER JOIN
                      dbo.V_RAZ_ItemInfo ON T1.ItemCode = dbo.V_RAZ_ItemInfo.ItemCode
GROUP BY T1.ItemCode, T1.OnOrder, T1.WhsCode, dbo.V_RAZ_ItemInfo.OnHold
HAVING      (dbo.V_RAZ_ItemInfo.OnHold = 'n')
ORDER BY T1.ItemCode, T1.WhsCode
and for the v_raz_openposdata I have the following query
SELECT     dbo.OPOR.DocNum, dbo.OPOR.DocStatus, dbo.POR1.WhsCode, dbo.POR1.ItemCode, dbo.POR1.Dscription, dbo.POR1.Quantity, dbo.POR1.OpenQty,
                      dbo.POR1.LineStatus, dbo.OPOR.DocDueDate
FROM         dbo.OPOR LEFT OUTER JOIN
                      dbo.POR1 ON dbo.OPOR.DocEntry = dbo.POR1.DocEntry
WHERE     (dbo.OPOR.DocStatus = 'O')
Any help is greatly appreciated.
Right now I do get the delivery date for regular items and components but the master sku for the component all of them have 1/1/1900.
Thank you

Thank you for replying Gordon. I did not remember I had asked this before. I no longer have access to the other account.
What I need on the query is that I want a list of items with the on order quantity and when we are expecting this order to be received. The receiving date is based on the PO delivery date. The trick here is that I need to Master sku to show the delivery date of the component sku. In my scenario all components have the same delivery date for the Master sku. If there are mulitple delivery dates because each warehouse is getting them on a different date then I want to get the delivery date for that warehouse.
Let me know if this is possible and if yes please guide towards a query for it.
Thank you.

Need help on query simplification...!!

Hi All,
I need help on below query simplification using idempotence rules.
SELECT ENO FROM AGS WHERE RESP = "Analyst" AND NOT (PNO = "P2" OR DUR = 12) AND PNO != "P2" AND DUR = 12;
Thanks.

928351 wrote:
Hi All,
I need help on below query simplification using idempotence rules.
SELECT ENO FROM AGS WHERE RESP = "Analyst" AND NOT (PNO = "P2" OR DUR = 12) AND PNO != "P2" AND DUR = 12;
Thanks.How do we know what the correct result set is?
Handle:     928351
Status Level:     Newbie
Registered:     Apr 17, 2012
Total Posts:     4
Total Questions:     3 (3 unresolved)
ZERO for three! STRIKE 3 you are out!

Need help in query to display lot and serial numbers for a Wip Job Component

Hi ALL,
I have a requirement as below.
I need to display lot and serial numbers for a Wip Job Component, i have a xml report in that for each wip job component i need to check whether it is a lot control item or serial control item based on that i need to display some data. so can you please help me to get the query to indentify the lot and serial number for a wip job component.
Thanks

Thank you for replying Gordon. I did not remember I had asked this before. I no longer have access to the other account.
What I need on the query is that I want a list of items with the on order quantity and when we are expecting this order to be received. The receiving date is based on the PO delivery date. The trick here is that I need to Master sku to show the delivery date of the component sku. In my scenario all components have the same delivery date for the Master sku. If there are mulitple delivery dates because each warehouse is getting them on a different date then I want to get the delivery date for that warehouse.
Let me know if this is possible and if yes please guide towards a query for it.
Thank you.

Need help with query joining several tables into a single return line

what i have:
tableA:
puid, task
id0, task0
id1, task1
id2, task2
tableB:
puid, seq, state
id0, 0, foo
id0, 1, bar
id0, 2, me
id1, 0, foo
id2, 0, foo
id2, 1, bar
tableC:
puid, seq, date
id0, 0, 12/21
id0, 1, 12/22
id0, 2, 12/22
id1, 0, 12/23
id2, 0, 12/22
id2, 1, 12/23
what i'd like to return:
id0, task0, 12/21, 12/22, 12/22
id1, task1, 12/23, N/A, N/A
id2, task2, 12/22, 12/23, N/A
N/A doesn't mean return the string "N/A"... it just means there was no value, so we don't need anything in this column (null?)
i can get output like below through several joins, however i was hoping to condense each "id" into a single line...
id0, task0, 12/21
id0, task0, 12/22
id0, task0, 12/23
id1, task1, 12/23
is this possible fairly easily?
Edited by: user9979830 on Mar 29, 2011 10:53 AM
Edited by: user9979830 on Mar 29, 2011 10:58 AM

Hi,
Welcome to the forum!
user9979830 wrote:
what i have:...Thanks for posting that so clearly!
Whenever you have a question, it's even better if you post CREATE TABLE and INSERT statements for your sample data, like this:
CREATE TABLE     tablea
(       puid     VARCHAR2 (5)
,     task     VARCHAR2 (5)
INSERT INTO tablea (puid, task) VALUES ('id0', 'task0');
INSERT INTO tablea (puid, task) VALUES ('id1', 'task1');
INSERT INTO tablea (puid, task) VALUES ('id2', 'task2');
CREATE TABLE     tablec
(       puid     VARCHAR2 (5)
,     seq     NUMBER (3)
,     dt     DATE          -- DATE is not a good column name
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 0, DATE '2010-12-21');
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 1, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 2, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id1', 0, DATE '2010-12-23');
INSERT INTO tablec (puid, seq, dt) VALUES ('id2', 0, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id2', 1, DATE '2010-12-23');This way, people can re-create the problem and test their ideas.
It doesn't look like tableb plays any role in this problem, so I didn't post it.
Explain how you get the results from that data. For example, why do you want this row in the results:
PUID TASK DT1        DT2        DT3
id0   task0 12/21/2010 12/22/2010 12/22/2010rather than, say
PUID TASK DT1        DT2        DT3
id0   task0 12/22/2010 12/21/2010 12/22/2010? Does 12/21 have to go in the first column because it is the earliest date, or is it because 12/21 is related to the lowest seq value? Or do you even care about the order, just as long as all 3 dates are shown?
Always say what version of Oracle you're uisng. The query below will work in Oracle 9 (and up), but starting in Oracle 11, the SELECT ... PIVOT feature could help you.
i can get output like below through several joins, however i was hoping to condense each "id" into a single line... Condensing the output, so that there's only one line for each puid, sounds like a job for "GROUP BY puid":
WITH     got_r_num     AS
     SELECT     puid
     ,     dt
     ,     ROW_NUMBER () OVER ( PARTITION BY puid
                               ORDER BY         seq          -- and/or dt
                       )         AS r_num
     FROM    tablec
--     WHERE     ...     -- If you need any filtering, put it here
SELECT       a.puid
,       a.task
,       MIN (CASE WHEN r.r_num = 1 THEN r.dt END)     AS dt1
,       MIN (CASE WHEN r.r_num = 2 THEN r.dt END)     AS dt2
,       MIN (CASE WHEN r.r_num = 3 THEN r.dt END)     AS dt3
,       MIN (CASE WHEN r.r_num = 4 THEN r.dt END)     AS dt4
FROM       tablea    a
JOIN       got_r_num r ON   a.puid = r.puid
GROUP BY a.puid
,            a.task
ORDER BY a.puid
;I'm guessing that you want the dates arranged by seq; that is, for each puid, the date related to the lowest seq comes first, regardless of whther that date is the earliest date for that puid or not. If that's not what you need, then change the analytic ORDER BY clause.
This does not assume that the seq values are always consecutive integers (0, 1, 2, ...) for each puid. You can skip, or even duplicate values. However, if the values are always consecutive integers, starting from 0, then you could simplify this. You won't need a sub-query at all; just use seq instead of r_num in the main query.
Here's the output I got from the query above:
PUID TASK DT1        DT2        DT3        DT4
id0   task0 12/21/2010 12/22/2010 12/22/2010
id1   task1 12/23/2010
id2   task2 12/22/2010 12/23/2010As posted, the query will display the first 4 dts for each puid.
If there are fewer than 4 dts for a puid, the query will still work. It will leave some columns NULL at the end.
If there are more than 4 dts for a puid, the query will still work. It will display the first 4, and ignore the others.
There's nothing special about the number 4; you could make it 3, or 5, or 35, but whatever number you choose, you have to hard-code that many columns into the query, and always get that many columns of output.
For various ways to deal with a variable number of pivoted coolumns, see the following thread:
PL/SQL
This question actually doesn't have anything to do with SQL*Plus; it's strictly a SQL question, and SQL questions are best posted on the "SQL and PL/SQL" forum:
PL/SQL
If you're not sure whether a question is more of a SQL question or a SQL*Plus question, then post it on the SQL forum. Many more people pay attention to that forum than to this one.

Need help wrt query

Hi ,
I have table A with below data :
Name Sal
Ram

That's because it's over here:
Need help wrt query

Need help regarding query

dear all,
i am working with JDBC and Access database. I have a table name FilingTable and it has 6 column: title, mdate, tdate, place, content and person. the UI has a jdbtable where it shows all the data from the database. there are six textfield where i can give value seach for perticular row consisting this value. the quirement is : I may give a parameter, two parameter and may be six parameter the search will show the rows containing those value or closely similar to those value. I need help from you.
zakir

Hello,
Try SQL with the LIKE condition to perform your search and % as wildcards.
LIKE will however not find similar matches but only exact matches.
Hope this helps
Niklas

Need help with query that can look data back please help.

hi guys i have a table like such
CREATE TABLE "FGL"
    "FGL_GRNT_CODE" VARCHAR2(60),
    "FGL_FUND_CODE" VARCHAR2(60),
    "FGL_ACCT_CODE" VARCHAR2(60),
    "FGL_ORGN_CODE" VARCHAR2(60),
    "FGL_PROG_CODE" VARCHAR2(60),
    "FGL_GRNT_YEAR" VARCHAR2(60),
    "FGL_PERIOD"    VARCHAR2(60),
    "FGL_BUDGET"    VARCHAR2(60)
)and i have a data like such
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7470','4730','02','10','2','200');I bascially need to get the total of the budget column. however its not as simple as it sound(well atleast not for me.) the totals carry over to the new period. youll noticed the you have a period column. basically what im saying is that
fgl_grant_year 10 period 1 = for account 7600 its $100 and $100 for period 2 you see 100 dollars again this is not to be added this is the carried over balance. which remains $100.
so im trying to write a query that basically does the following.
im given a period for the sake of this example lets say period 1 i get nothing else. I have to find the greates grant year grab the amount for period 14(which is the total from the previous year) and add it to the amount of the current period. in this case period 1 grnt_year 11
so the expected outcome should be $700
240055     240055     7240     4730     02     10     14     200
240055     240055     7600     4730     02     10     14     100
240055     240055     7600     4730     02     11     1     400keep in mind that im not given a year just a period.
any help that you guys can offer would be immensely appreciated. I have been trying to get this to work for over 3 days now.
finally broke down and put together this post
Edited by: mlov83 on Sep 14, 2011 8:48 PM

Frank
wondering if you can help me modify this sql statement that you provided me with .
table values have been modified a bit.
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');i need to take one more thing into consideration. if the greatest year has a value on period 00 i need to ignore the period 14 and the current period total would be
the current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
Miguel

Query off of Oracle using WinSql - Need help with query

I am trying to query off of Oracle using program WinSql.
I have a table(tticpr200110) that has the following sample data:
ITEM     CODE     T$AMNT
23500076 ACL     .0049
23500076 APM     0
23500076 APO     .0093
23500076 EXP     .0001
23500076 RES     .0072
and what I want it to look like is:
ITEM     ACL     APM     APO     EXP     RES
23500076     0.0049     0     0.0093     0.0001     0.0072
(actually I need the last 2 columns added together to be MATL-but can deal with that down the road).
Seems simple enough, but I don't know to put into the columns.
Any help would be GREATLY appreciated as soon as possible would be even better.

My table - tticpr200110 when it runs I get the following sample data for part number 23500076:
The first coloumn ITEM is the part number.
The second column CODE is 1 of 5 different cost codes
The third column is the cost for that code for that part.
ITEM CODE AMNT
23500076 ACL 0.0049
23500076 APM 0.0000
23500076 APO 0.0093
23500076 EXP 0.0001
23500076 RES 0.0072
I want to make a query that makes the data look like this:
ITEM ACL APM APO EXP RES
23500076 0.0049 0.0000 0.0093 0.0001 0.0072
(similar to a pivot table in excel or acess)
I hope this helps better.
Thanks!

Need help with Query to determine Credit Memos and Invoices

Hi All
Thanks for all the help here.
I need a query to determine any credits or invoices issued within a given period.
OINV and ORIN with UNION ALL?
Please advise any help.
Thank you!

Hi Daniel,
Please check below Query.
SELECT T0.[DocNum] as 'Invice No', T0.[DocDate] as 'Invoice Date', T0.[CardName] as 'Invoiced Customer', T3.[DocNum] as 'Credit Memo No', T3.[DocDate] as 'Credit Mamo Date', T3.[CardName] as 'Credit Memo Customer' FROM OINV T0 LEFT JOIN INV1 T1 ON T0.[DocEntry] = T1.[DocEntry] LEFT JOIN RIN1 T2 ON T2.[BaseEntry] = T1.[DocEntry] AND T2.[BaseLine] = T1.[LineNum] LEFT JOIN ORIN T3 ON T2.[DocEntry] = T3.[DocEntry] WHERE T0.[DocDate] >=[%3] AND T0.[DocDate] <=[%4]
Hope this helps
Regards::::
Atul Chakraborty

Need help wrt query urgently

Hi ,
I have two tables "table1" and "table2".Structure of the both tables are below:
Table1:
CustomerId
CustFname
CustLname
Convertion_Date
Table2:
CustomerId
DFname
DLname
CustomerId is used for joins .
Now i need a query based on conversion_date.
If conversion_date <sysdate
then
select CustomerId ,CustFname,CustLname,Convertion_Date from Table1
else
select CustomerId,DFname,DLname from Table2
End .
I need this functionality in a single query using case statement.
Please help ..
Thanks,
Preethi MR

Preethi MR wrote:
Hi ,
I have two tables "table1" and "table2".Structure of the both tables are below:
Table1:
CustomerId
CustFname
CustLname
Convertion_Date
Table2:
CustomerId
DFname
DLname
CustomerId is used for joins .
Now i need a query based on conversion_date.
If conversion_date <sysdate
then
select CustomerId ,CustFname,CustLname,Convertion_Date from Table1
else
select CustomerId,DFname,DLname from Table2
End .
I need this functionality in a single query using case statement.
Please help ..
Thanks,
Preethi MRIs this urgent homework? Or urgent something else work?
What exactly makes it urgent?

Need Help Displaying Query

I am having problems with this, I need to re-write this into
3 different routes the CFIF can take. Currently this works because
the query only returns 9 records, they are being displayed as 3
rows with 3 columns. I need to re-write and have it where if the
record count is LT9 to only have the output be on 2 columns with 3
rows....and if the count is LT6 then i only want 1 row with 3
columns. I am having problems figuring out how to modify this code
to accomplish this task. Any help would be greeeeeeeeeeeeat.
<cfif alsobought_counter LTE 9>
<cfif (prodCount+(detailsColCount-1)) MOD detailsColCount
EQ 0><div class="clearfix"></cfif>
<div class="productThumbCont">
<cfset product_link = link("product",
alsoBought_product_id, product_title)>
<div class="productThumbImg">
<a href="#product_link#" class="picksLink"
title="#linktitle#"><img
src="#cfimage[alsobought_counter].thumb.path#" alt="" border="0"
tooltip="#alsoBought_product_id#" />
<cfif len(trim(qryAlso_Bought.is_ondemand)) and
qryrelated_products.is_ondemand EQ 1 AND qryAlso_Bought.is_disabled
NEQ 1 AND request.allowVOD eq 1><div
class="on-demand-call-out"
style="cursor:pointer;margin-top:-22px;margin-top:-25/**/px;margin-left:21px;background:
url(../skins/graphics/btns/ondemand-overlay.gif) 0 0
no-repeat;width:79px;height:22px;filter:alpha(opacity=80);-moz-opacity:.80;opacity:.80;">< /div></cfif></a>
</div>
<div class="productThumbTitle">
<a href="#product_link#" class="picksLink"
title="#linktitle#">#product_title#<cfif
len(trim(extendedTitle))>
(#extendedTitle#)</cfif></a>

</div>
</div>
<cfif prodCount MOD detailsColCount EQ
0></div></cfif>
<cfset prodCount = IncrementValue(prodCount)>
<cfset alsobought_counter =
IncrementValue(alsobought_counter)>
</cfif>
</cfoutput>
<cfif (prodCount-1) MOD detailsColCount NEQ
0></div></cfif>
</div>
Text

After you run your query, look at the record count. Run all
the if/else logic you have to to determine the number of columns
you want. Don't worry about the number of rows, that will take care
of itself.
Once you have the number of columns figured out, output your
data as simply as possible, no style tags, no links, just data. Use
the modulus operator to decide when to start a new row.
Once you've accomplished that, start adding the rest of your
stuff.

Need Help in Query Design!!!!

Hello Guys,
We are developing a BI 7 report. the requirement is such that the customer during query execution is providing the number of days. With this input in consideration, we need to bring in data which falls in the range (current date - number of days). Would be great if you can share your ideas on it.

Hi,
You can use variables where it will prompt you to enter the calendar year and based on that the query will be displayed...
Check out the link below:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/frameset.htm
Regards,
Kishore

Need help in query

Similar Messages

Maybe you are looking for