Need Help in Smartforms
Hi,
Can any one tell me the step to create smartforms without driver Program? Can we create selection screen in smartform?
Thanks and Regards,
Hetal
Hi Hetal,
You can't include a selection screen in the same way as an ABAP report, but you could call a function module to present a pop-up to the user to capture values. Build a function module with a screen to enter the values needed, the function module calls this screen and returns the values entered. You can then call this function module from the initialisation part of the smartform.
You'll still need something to call the form though......
Regards,
Nick
Similar Messages
-
It's very urgent i need help in smartforms
I need your help for smartforms. I created a smartforms in SD for getting quotations. My problem is that when I run da report it is not executing & if i run smartforms it is giving error in da functional module as - In program "/1BCDWB/SAPLSF00000003 ", the following syntax error occurred:
"The data object "I_HEADER" does not have a component called "BNAME"."
and more over i need a code for my my user tht when i execute this form before displaying print or printpreview i should give a popup window asking da user whether to display item code or not then i should get da print or printpreview. when the user needs item code he can print as well if he don't it should not display. this da code i return in se38 editor. In smartforms i wrote code for getting company address etc. I did not write anything in initialization.
source code
*& Application : Sales & Distribution (SD)
*& Description : This report will Print Sales Order Confirmation Using Smartform
*& Transaction Code :
*& Area Menu Code : ZSD
*& Layout : ZSDORDERCONF
*& Dev.Complited On :
REPORT ZSDR0004.
INCLUDE: ZSDI0003.
S U B R O U T I N E S *
FORM ENTRY USING RETURN_CODE TYPE I
US_SCREEN TYPE C.
CLEAR RETCODE.
XSCREEN = US_SCREEN.
PERFORM PROCESSING.
IF RETCODE NE 0.
RETURN_CODE = 1.
ELSE.
RETURN_CODE = 0.
ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING *
FORM PROCESSING.
PERFORM GET_DATA.
CHECK RETCODE = 0.
PERFORM PRINT_DATA.
CHECK RETCODE = 0.
ENDFORM. "PROCESSING
FORM CHECK_REPEAT *
A text is printed, if it is a repeat print for the document. *
FORM CHECK_REPEAT.
CLEAR REPEAT.
SELECT * INTO *NAST FROM NAST WHERE KAPPL = NAST-KAPPL
AND OBJKY = NAST-OBJKY
AND KSCHL = NAST-KSCHL
AND SPRAS = NAST-SPRAS
AND PARNR = NAST-PARNR
AND PARVW = NAST-PARVW
AND NACHA BETWEEN '1' AND '4'.
CHECK *NAST-VSTAT = '1'.
REPEAT = 'X'.
EXIT.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
FORM GET_DATA *
General provision of data for the form *
FORM GET_DATA.
DATA: US_VEDA_VBELN LIKE VEDA-VBELN.
DATA: US_VEDA_POSNR_LOW LIKE VEDA-VPOSN.
DATA: DA_MESS LIKE VBFS OCCURS 0 WITH HEADER LINE.
DATA: DA_SUBRC LIKE SY-SUBRC,
DA_DRAGR LIKE TVAG-DRAGR.
DATA: DA_GANF(1) TYPE C, "Print flag for billing correction
DA_LANF(1) TYPE C. "Print flag for billing correction
CALL FUNCTION 'RV_PRICE_PRINT_GET_MODE'
IMPORTING
E_PRINT_MODE = PRICE_PRINT_MODE.
IF PRICE_PRINT_MODE EQ CHARA.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
TABLES
TKOMV = TKOMV.
ENDIF.
CLEAR KOMK.
CLEAR KOMP.
VBCO3-MANDT = SY-MANDT.
VBCO3-SPRAS = NAST-SPRAS.
VBCO3-VBELN = NAST-OBJKY.
VBCO3-KUNDE = NAST-PARNR.
VBCO3-PARVW = NAST-PARVW.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
EXPORTING
COMWA = VBCO3
IMPORTING
KOPF = VBDKA
TABLES
POS = TVBDPA
MESS = DA_MESS
EXCEPTIONS
FEHLER_BEI_DATENBESCHAFFUNG = 1.
IF SY-SUBRC NE 0.
PERFORM PROTOCOL_UPDATE.
RETCODE = 1.
EXIT.
ELSE.
LOOP AT DA_MESS.
SY-MSGID = DA_MESS-MSGID.
SY-MSGNO = DA_MESS-MSGNO.
SY-MSGTY = DA_MESS-MSGTY.
SY-MSGV1 = DA_MESS-MSGV1.
SY-MSGV2 = DA_MESS-MSGV2.
SY-MSGV3 = DA_MESS-MSGV3.
SY-MSGV4 = DA_MESS-MSGV4.
PERFORM PROTOCOL_UPDATE.
ENDLOOP.
ENDIF.
*Get Header Data In I_HEADER Table.
SELECT VBAKVBELN VBAKAUDAT VBAKKUNNR VBAKWAERK
VBAKVKORG VBAKANGDT VBAKBNDDT VBAKVBTYP
VBAKKNUMV VBAKKALSM VBAKNETWR VBAKVKBUR
VBAKBNAME VBKDBSTKD VBKDBSTDK VBKDINCO1
VBKDINCO2 VBKDZTERM
INTO CORRESPONDING FIELDS OF TABLE I_HEADER
FROM VBAK
JOIN VBKD ON VBKDVBELN = VBAKVBELN
WHERE VBAK~VBELN = VBCO3-VBELN.
**Get Address Number For Company
IF NOT I_HEADER[] IS INITIAL.
READ TABLE I_HEADER INDEX 1.
SELECT SINGLE BUKRS ADRNR INTO (COMPCD, ADDCOMP)
FROM TVKO
WHERE VKORG = I_HEADER-VKORG.
ENDIF.
fill address key --> necessary for emails
ADDR_KEY-ADDRNUMBER = VBDKA-ADRNR.
ADDR_KEY-PERSNUMBER = VBDKA-ADRNP.
ADDR_KEY-ADDR_TYPE = VBDKA-ADDRESS_TYPE.
Fetch servicecontract-data and notice-data for head and position.
US_VEDA_VBELN = VBDKA-VBELN.
US_VEDA_POSNR_LOW = POSNR_LOW.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
EXPORTING
I_DOCUMENT_NUMBER = US_VEDA_VBELN
I_LANGUAGE = SY-LANGU
I_POSNR_LOW = US_VEDA_POSNR_LOW
TABLES
PRINT_DATA_POS = TKOMSERVP
PRINT_DATA_HEAD = TKOMSERVH
PRINT_NOTICE_POS = TKOMSERVPN
PRINT_NOTICE_HEAD = TKOMSERVHN.
PERFORM GET_CONTROLL_DATA.
PERFORM SENDER.
PERFORM CHECK_REPEAT.
LOOP AT TVBDPA.
VBDPA = TVBDPA.
IF VBDPA-DRAGR EQ SPACE. "Print rejected item?
IF VBDPA-POSNR_NEU NE SPACE. "Item
PERFORM GET_ITEM_SERIALS.
PERFORM GET_ITEM_CHARACTERISTICS.
PERFORM GET_ITEM_BILLING_SCHEDULES.
PERFORM GET_ITEM_PRICES.
PERFORM GET_ITEM_ADDIS.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. "GET_DATA
FORM GET_ITEM_BILLING_SCHEDULES *
In this routine the billing schedules are fetched from the *
database. *
FORM GET_ITEM_BILLING_SCHEDULES.
REFRESH TFPLTDR.
CHECK NOT VBDPA-FPLNR IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
EXPORTING
I_FPLNR = VBDPA-FPLNR
I_LANGUAGE = NAST-SPRAS
I_VBELN = VBDKA-VBELN
TABLES
ZFPLTDR = TFPLTDR.
ENDFORM. "GET_ITEM_BILLING_SCHEDULES
*& FORM GET_ITEM_ADDIS
Additionals data are fetched from database
FORM GET_ITEM_ADDIS.
CLEAR: TADDI_PRINT.
CALL FUNCTION 'WTAD_ADDIS_IN_SO_PRINT'
EXPORTING
FI_VBELN = VBDKA-VBELN
FI_POSNR = VBDPA-POSNR
FI_LANGUAGE = SY-LANGU
TABLES
FET_ADDIS_IN_SO_PRINT = TADDI_PRINT
EXCEPTIONS
ADDIS_NOT_ACTIVE = 1
NO_ADDIS_FOR_SO_ITEM = 2
OTHERS = 3.
ENDFORM. " GET_ITEM_ADDIS
FORM GET_ITEM_CHARACTERISTICS *
In this routine the configuration data item is fetched from *
the database. *
FORM GET_ITEM_CHARACTERISTICS.
DATA DA_T_CABN LIKE CABN OCCURS 10 WITH HEADER LINE.
DATA: BEGIN OF DA_KEY,
MANDT LIKE CABN-MANDT,
ATINN LIKE CABN-ATINN,
END OF DA_KEY.
REFRESH TKOMCON.
CHECK NOT VBDPA-CUOBJ IS INITIAL AND
VBDPA-ATTYP NE VAR_TYP.
CALL FUNCTION 'VC_I_GET_CONFIGURATION'
EXPORTING
INSTANCE = VBDPA-CUOBJ
LANGUAGE = NAST-SPRAS
PRINT_SALES = CHARX
TABLES
CONFIGURATION = TKOMCON
EXCEPTIONS
OTHERS = 4.
RANGES : DA_IN_CABN FOR DA_T_CABN-ATINN.
Beschreibung der Merkmale wegen Objektmerkmalen auf sdcom-vkond holen
CLEAR DA_IN_CABN. REFRESH DA_IN_CABN.
LOOP AT TKOMCON.
DA_IN_CABN-OPTION = 'EQ'.
DA_IN_CABN-SIGN = 'I'.
DA_IN_CABN-LOW = TKOMCON-ATINN.
APPEND DA_IN_CABN.
ENDLOOP.
CLEAR DA_T_CABN. REFRESH DA_T_CABN.
CALL FUNCTION 'CLSE_SELECT_CABN'
EXPORTING
KEY_DATE = SY-DATUM
BYPASSING_BUFFER = ' '
WITH_PREPARED_PATTERN = ' '
I_AENNR = ' '
IMPORTING
AMBIGUOUS_OBJ_CHARACTERISTIC =
TABLES
IN_CABN = DA_IN_CABN
T_CABN = DA_T_CABN
EXCEPTIONS
NO_ENTRY_FOUND = 1
OTHERS = 2.
Preisfindungsmerkmale / Merkmale auf VCSD_UPDATE herausnehmen
SORT DA_T_CABN.
LOOP AT TKOMCON.
DA_KEY-MANDT = SY-MANDT.
DA_KEY-ATINN = TKOMCON-ATINN.
READ TABLE DA_T_CABN WITH KEY DA_KEY BINARY SEARCH.
IF SY-SUBRC <> 0 OR
( ( DA_T_CABN-ATTAB = 'SDCOM' AND
DA_T_CABN-ATFEL = 'VKOND' ) OR
( DA_T_CABN-ATTAB = 'VCSD_UPDATE' ) ) .
DELETE TKOMCON.
ENDIF.
ENDLOOP.
ENDFORM. "GET_ITEM_CHARACTERISTICS
FORM GET_ITEM_PRICES *
In this routine the price data for the item is fetched from *
the database. *
FORM GET_ITEM_PRICES.
CLEAR: KOMP,
TKOMV.
IF KOMK-KNUMV NE VBDKA-KNUMV OR
KOMK-KNUMV IS INITIAL.
CLEAR KOMK.
KOMK-MANDT = SY-MANDT.
KOMK-KALSM = VBDKA-KALSM.
KOMK-KAPPL = PR_KAPPL.
KOMK-WAERK = VBDKA-WAERK.
KOMK-KNUMV = VBDKA-KNUMV.
KOMK-KNUMA = VBDKA-KNUMA.
KOMK-VBTYP = VBDKA-VBTYP.
KOMK-LAND1 = VBDKA-LAND1.
KOMK-VKORG = VBDKA-VKORG.
KOMK-VTWEG = VBDKA-VTWEG.
KOMK-SPART = VBDKA-SPART.
KOMK-BUKRS = VBDKA-BUKRS_VF.
KOMK-HWAER = VBDKA-WAERS.
KOMK-PRSDT = VBDKA-ERDAT.
KOMK-KURST = VBDKA-KURST.
KOMK-KURRF = VBDKA-KURRF.
KOMK-KURRF_DAT = VBDKA-KURRF_DAT.
ENDIF.
KOMP-KPOSN = VBDPA-POSNR.
KOMP-KURSK = VBDPA-KURSK.
KOMP-KURSK_DAT = VBDPA-KURSK_DAT.
if vbdka-vbtyp ca 'HKNOT6'.
if vbdpa-shkzg ca ' A'.
komp-shkzg = 'X'.
endif.
else.
if vbdpa-shkzg ca 'BX'.
komp-shkzg = 'X'.
endif.
endif.
IF PRICE_PRINT_MODE EQ CHARA.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
COMM_HEAD_I = KOMK
COMM_ITEM_I = KOMP
LANGUAGE = NAST-SPRAS
IMPORTING
COMM_HEAD_E = KOMK
COMM_ITEM_E = KOMP
TABLES
TKOMV = TKOMV
TKOMVD = TKOMVD.
ELSE.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM_BUFFER'
EXPORTING
COMM_HEAD_I = KOMK
COMM_ITEM_I = KOMP
LANGUAGE = NAST-SPRAS
IMPORTING
COMM_HEAD_E = KOMK
COMM_ITEM_E = KOMP
TABLES
TKOMV = TKOMV
TKOMVD = TKOMVD.
ENDIF.
ENDFORM. "GET_ITEM_PRICES
FORM GET_HEADER_PRICES *
In this routine the price data for the header is fetched from *
the database. *
FORM GET_HEADER_PRICES.
LOOP AT TVBDPA.
CALL FUNCTION 'SD_TAX_CODE_MAINTAIN'
EXPORTING
KEY_KNUMV = VBDKA-KNUMV
KEY_KPOSN = TVBDPA-POSNR
I_APPLICATION = ' '
I_PRICING_PROCEDURE = VBDKA-KALSM
TABLES
XKOMV = TKOMV.
ENDLOOP.
IF PRICE_PRINT_MODE EQ CHARA.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
COMM_HEAD_I = KOMK
LANGUAGE = NAST-SPRAS
IMPORTING
COMM_HEAD_E = KOMK
TABLES
TKOMV = TKOMV
TKOMVD = TKOMVD.
ELSE.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD_BUFFER'
EXPORTING
COMM_HEAD_I = KOMK
LANGUAGE = NAST-SPRAS
IMPORTING
COMM_HEAD_E = KOMK
TABLES
TKOMV = TKOMV
TKOMVD = TKOMVD.
ENDIF.
ENDFORM. "GET_HEADER_PRICES
FORM PRINT_DATA *
Print Quotation *
FORM PRINT_DATA.
DATA: ls_control TYPE ssfctrlop.
data: OUTPUT_OPTIONS TYPE SSFCOMPOP,cf_retcode type sy-subrc.
DATA: ls_print_data_to_read TYPE lbbil_print_data_to_read.
DATA: ls_addr_key LIKE addr_key.
DATA: ls_dlv-land LIKE vbrk-land1.
DATA: ls_job_info TYPE ssfcrescl.
DATA: ls_control_param TYPE ssfctrlop.
DATA: ls_composer_param TYPE ssfcompop.
DATA: ls_recipient TYPE swotobjid.
DATA: ls_sender TYPE swotobjid.
DATA: NAST_ANZAL LIKE NAST-ANZAL. "Number of outputs (Orig. + Cop.)
DATA: NAST_TDARMOD LIKE NAST-TDARMOD. "Archiving only one time
DATA: ls_bil_invoice TYPE lbbil_invoice.
SELECT SINGLE SFORM INTO LF_FORMNAME
FROM TNAPR
WHERE KSCHL = NAST-KSCHL
AND NACHA = NAST-NACHA.
*IF NAST-KSCHL = 'ZORD'.
lf_formname = 'ZSDORDERCONF'.
*ELSEIF NAST-KSCHL = 'ZOR1'.
lf_formname = 'ZSDORDERCONF'.
*ELSEIF NAST-KSCHL = 'ZOR2'.
lf_formname = 'ZCSORDERCONF'.
ENDIF.
determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
READ TABLE I_HEADER INDEX 1.
ls_controL-no_dialog = 'X'.
if sy-ucomm = 'VIEW'.
LS_CONTROL-PREVIEW = 'X'.
endif.
CALL FUNCTION LF_FM_NAME
EXPORTING
control_parameters = ls_control
OUTPUT_OPTIONS = OUTPUT_OPTIONS
SO_VBELN = I_HEADER-VBELN
SO_AUDAT = I_HEADER-AUDAT
SO_REPEAT = REPEAT
SO_TYPE = I_HEADER-VBTYP
SO_CADD = ADDCOMP
SO_CCODE = COMPCD
TABLES
I_HEADER = I_HEADER
TKOMV = TKOMV
I_ITEM = TVBDPA
I_XDATA = I_XDATA
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ENDFORM. "PRINT_DATA
FORM PROTOCOL_UPDATE *
The messages are collected for the processing protocol. *
FORM PROTOCOL_UPDATE.
CHECK XSCREEN = SPACE.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
MSG_ARBGB = SYST-MSGID
MSG_NR = SYST-MSGNO
MSG_TY = SYST-MSGTY
MSG_V1 = SYST-MSGV1
MSG_V2 = SYST-MSGV2
MSG_V3 = SYST-MSGV3
MSG_V4 = SYST-MSGV4
EXCEPTIONS
OTHERS = 1.
ENDFORM. "PROTOCOL_UPDATE
FORM SENDER *
This routine determines the address of the sender (Table VKO) *
FORM SENDER.
SELECT SINGLE * FROM TVKO WHERE VKORG = VBDKA-VKORG.
IF SY-SUBRC NE 0.
SYST-MSGID = 'VN'.
SYST-MSGNO = '203'.
SYST-MSGTY = 'E'.
SYST-MSGV1 = 'TVKO'.
SYST-MSGV2 = SYST-SUBRC.
PERFORM PROTOCOL_UPDATE.
EXIT.
ENDIF.
CLEAR GV_FB_ADDR_GET_SELECTION.
GV_FB_ADDR_GET_SELECTION-ADDRNUMBER = TVKO-ADRNR. "SADR40A
CALL FUNCTION 'ADDR_GET'
EXPORTING
ADDRESS_SELECTION = GV_FB_ADDR_GET_SELECTION
ADDRESS_GROUP = 'CA01'
IMPORTING
SADR = SADR
EXCEPTIONS
OTHERS = 01.
IF SY-SUBRC NE 0.
CLEAR SADR.
ENDIF. "SADR40A
VBDKA-SLAND = SADR-LAND1.
IF SY-SUBRC NE 0.
SYST-MSGID = 'VN'.
SYST-MSGNO = '203'.
SYST-MSGTY = 'E'.
SYST-MSGV1 = 'SADR'.
SYST-MSGV2 = SYST-SUBRC.
PERFORM PROTOCOL_UPDATE.
ENDIF.
SELECT SINGLE * FROM TVBUR WHERE VKBUR = VBDKA-VKBUR.
IF SY-SUBRC NE 0.
SYST-MSGID = 'VN'.
SYST-MSGNO = '203'.
SYST-MSGTY = 'E'.
SYST-MSGV1 = 'TVBUR'.
SYST-MSGV2 = SYST-SUBRC.
PERFORM PROTOCOL_UPDATE.
ENDIF.
ENDFORM. "SENDER
*& Form GET_ITEM_SERIALS
This routine give back the serialnumbers of salesdocument *
position. The numbers are processed as print-lines in the *
table KOMSER_PRINT. *
--> US_VBELN Salesdocument
--> US_POSNR Position of the salesdocument
FORM GET_ITEM_SERIALS.
DATA: KEY_DATA LIKE RSEROB,
SERNOS LIKE RSEROB OCCURS 0 WITH HEADER LINE.
KEY_DATA-TASER = 'SER02'.
KEY_DATA-SDAUFNR = VBDKA-VBELN.
KEY_DATA-POSNR = VBDPA-POSNR.
IF KEY_DATA-SDAUFNR IS INITIAL AND NOT
KEY_DATA-POSNR IS INITIAL.
beim Anlegen ist Belegnummer leer - deshalb Dummy-Belegnummer
KEY_DATA-SDAUFNR = CHAR$.
ENDIF.
Read the Serialnumbers of a Position.
REFRESH: TKOMSER,
TKOMSER_PRINT.
CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
EXPORTING
KEY_DATA = KEY_DATA
TABLES
SERNOS = SERNOS
EXCEPTIONS
KEY_PARAMETER_ERROR = 1
NO_SUPPORTED_ACCESS = 2
NO_DATA_FOUND = 3
OTHERS = 4.
IF SY-SUBRC NE 0 AND
SY-SUBRC NE 3.
PERFORM PROTOCOL_UPDATE.
ENDIF.
CHECK SY-SUBRC EQ 0.
Serialnummern übergeben
TKOMSER-VBELN = SERNOS-SDAUFNR.
TKOMSER-POSNR = SERNOS-POSNR.
LOOP AT SERNOS.
TKOMSER-SERNR = SERNOS-SERNR.
APPEND TKOMSER.
ENDLOOP.
Process the stringtable for Printing.
CALL FUNCTION 'PROCESS_SERIALS_FOR_PRINT'
EXPORTING
I_BOUNDARY_LEFT = '(_'
I_BOUNDARY_RIGHT = '_)'
I_SEP_CHAR_STRINGS = ',_'
I_SEP_CHAR_INTERVAL = '_-_'
I_USE_INTERVAL = 'X'
I_BOUNDARY_METHOD = 'C'
I_LINE_LENGTH = 50
I_NO_ZERO = 'X'
I_ALPHABET = SY-ABCDE
I_DIGITS = '0123456789'
I_SPECIAL_CHARS = '-'
I_WITH_SECOND_DIGIT = ' '
TABLES
SERIALS = TKOMSER
SERIALS_PRINT = TKOMSER_PRINT
EXCEPTIONS
BOUNDARY_MISSING = 01
INTERVAL_SEPARATION_MISSING = 02
LENGTH_TO_SMALL = 03
INTERNAL_ERROR = 04
WRONG_METHOD = 05
WRONG_SERIAL = 06
TWO_EQUAL_SERIALS = 07
SERIAL_WITH_WRONG_CHAR = 08
SERIAL_SEPARATION_MISSING = 09.
IF SY-SUBRC NE 0.
PERFORM PROTOCOL_UPDATE.
ENDIF.
ENDFORM. " GET_ITEM_SERIALS
*eject
*& Form GET_CONTROLL_DATA
Checks if servicedata for the header exists. *
Checks if servicedata for the position exists. *
Checks if noticedata for the header exists. *
Checks if noticedata for the position exists. *
FORM GET_CONTROLL_DATA.
DATA: LINES TYPE I.
Exists servicedata for the header?
DESCRIBE TABLE TKOMSERVH LINES LINES.
IF LINES GT 0.
STEU-VDKEX = 'X'.
ENDIF.
Exists servicedata for the position?
DESCRIBE TABLE TKOMSERVP LINES LINES.
IF LINES GT 0.
STEU-VDPEX = 'X'.
ENDIF.
Exists noticedata for the header?
DESCRIBE TABLE TKOMSERVHN LINES LINES.
IF LINES GT 0.
STEU-KBKEX = 'X'.
ENDIF.
Exists noticedata for the position?
DESCRIBE TABLE TKOMSERVPN LINES LINES.
IF LINES GT 0.
STEU-KBPEX = 'X'.
ENDIF.
ENDFORM. " GET_CONTROLL_DATA
*eject
*& Form get_fax_land
text
-->P_NAST_TLAND text
form get_fax_land using p_nast_land like nast-tland.
DATA L_land like nast-tland .
clear L_land.
IF NOT addr_key-addrnumber IS INITIAL.
CALL FUNCTION 'WFMC_FAXNUMBER_FOR_ADDRESS'
EXPORTING
adrnr = addr_key-addrnumber
IMPORTING
tland = L_land
EXCEPTIONS
addr_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0 AND NOT L_land IS INITIAL.
p_nast_land = L_land.
ENDIF.
ENDIF.
endform. " get_fax_land
*& Form get_data1
text
-->P_LS_PRINT_DATA_TO_READ text
<--P_LS_ADDR_KEY text
<--P_LS_DLV_LAND text
<--P_LS_BIL_INVOICE text
<--P_CF_RETCODE text
FORM get_data1
USING IS_PRINT_DATA_TO_READ TYPE LBBIL_PRINT_DATA_TO_READ
CHANGING CS_ADDR_KEY LIKE ADDR_KEY
CS_DLV-LAND LIKE VBRK-LAND1
CS_BIL_INVOICE TYPE LBBIL_INVOICE
CF_RETCODE.
IF NAST-OBJKY+10 NE SPACE.
NAST-OBJKY = NAST-OBJKY+16(10).
ELSE.
NAST-OBJKY = NAST-OBJKY.
ENDIF.
read print data
CALL FUNCTION 'LB_BIL_INV_OUTP_READ_PRTDATA'
EXPORTING
IF_BIL_NUMBER = NAST-OBJKY
IF_PARVW = NAST-PARVW
IF_PARNR = NAST-PARNR
IF_LANGUAGE = NAST-SPRAS
IS_PRINT_DATA_TO_READ = IS_PRINT_DATA_TO_READ
IMPORTING
ES_BIL_INVOICE = CS_BIL_INVOICE
EXCEPTIONS
RECORDS_NOT_FOUND = 1
RECORDS_NOT_REQUESTED = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
error handling
CF_RETCODE = SY-SUBRC.
PERFORM PROTOCOL_UPDATE.
ENDIF.
get nast partner adress for communication strategy
PERFORM GET_ADDR_KEY USING CS_BIL_INVOICE-HD_ADR
CHANGING CS_ADDR_KEY.
get delivery land
PERFORM GET_DLV-LAND USING CS_BIL_INVOICE-HD_GEN
CHANGING CS_DLV-LAND.
ENDFORM. " get_data1
*& Form GET_ADDR_KEY
text
-->P_CS_BIL_INVOICE_HD_ADR text
<--P_CS_ADDR_KEY text
FORM GET_ADDR_KEY USING IT_HD_ADR TYPE LBBIL_INVOICE-HD_ADR
CHANGING CS_ADDR_KEY LIKE ADDR_KEY.
FIELD-SYMBOLS -ADDRESS_TYPE.
ENDIF.
ENDFORM. " GET_ADDR_KEY
*& Form GET_DLV-LAND
text
-->P_CS_BIL_INVOICE_HD_GEN text
<--P_CS_DLV_LAND text
FORM GET_DLV-LAND USING IT_HD_GEN TYPE LBBIL_INVOICE-HD_GEN
CHANGING CS_DLV-LAND LIKE VBRK-LAND1.
CS_DLV-LAND = IT_HD_GEN-DLV_LAND.
ENDFORM. " GET_DLV-LAND
*& Form set_print_data_to_read
text
-->P_LF_FORMNAME text
<--P_LS_PRINT_DATA_TO_READ text
<--P_CF_RETCODE text
FORM set_print_data_to_read USING IF_FORMNAME LIKE TNAPR-SFORM
CHANGING CS_PRINT_DATA_TO_READ TYPE LBBIL_PRINT_DATA_TO_READ
CF_RETCODE.
FIELD-SYMBOLS: TYPE XFELD.
DATA: LT_FIELDLIST TYPE TSFFIELDS.
set print data requirements
DO.
ASSIGN COMPONENT SY-INDEX OF STRUCTURE
CS_PRINT_DATA_TO_READ TO = 'X'.
ENDDO.
CALL FUNCTION 'SSF_FIELD_LIST'
EXPORTING
FORMNAME = IF_FORMNAME
VARIANT = ' '
IMPORTING
FIELDLIST = LT_FIELDLIST
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
error handling
CF_RETCODE = SY-SUBRC.
PERFORM PROTOCOL_UPDATE.
ENDIF.
ENDFORM. " set_print_data_to_read
*& Form set_print_param
text
-->P_LS_ADDR_KEY text
-->P_LS_DLV_LAND text
<--P_LS_CONTROL_PARAM text
<--P_LS_COMPOSER_PARAM text
<--P_LS_RECIPIENT text
<--P_LS_SENDER text
<--P_CF_RETCODE text
FORM set_print_param using IS_ADDR_KEY LIKE ADDR_KEY
IS_DLV-LAND LIKE VBRK-LAND1
CHANGING CS_CONTROL_PARAM TYPE SSFCTRLOP
CS_COMPOSER_PARAM TYPE SSFCOMPOP
CS_RECIPIENT TYPE SWOTOBJID
CS_SENDER TYPE SWOTOBJID
CF_RETCODE TYPE SY-SUBRC.
DATA: LS_ITCPO TYPE ITCPO.
DATA: LF_REPID TYPE SY-REPID.
DATA: LF_DEVICE TYPE TDDEVICE.
DATA: LS_RECIPIENT TYPE SWOTOBJID.
DATA: LS_SENDER TYPE SWOTOBJID.
LF_REPID = SY-REPID.
CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
EXPORTING
PI_NAST = NAST
PI_COUNTRY = IS_DLV-LAND
PI_ADDR_KEY = IS_ADDR_KEY
PI_REPID = LF_REPID
PI_SCREEN = XSCREEN
IMPORTING
PE_RETURNCODE = CF_RETCODE
PE_ITCPO = LS_ITCPO
PE_DEVICE = LF_DEVICE
PE_RECIPIENT = CS_RECIPIENT
PE_SENDER = CS_SENDER.
IF CF_RETCODE = 0.
MOVE-CORRESPONDING LS_ITCPO TO CS_COMPOSER_PARAM.
CS_CONTROL_PARAM-NO_OPEN
CS_CONTROL_PARAM-NO_CLOSE
CS_CONTROL_PARAM-DEVICE = LF_DEVICE.
CS_CONTROL_PARAM-NO_DIALOG = 'X'.
CS_CONTROL_PARAM-PREVIEW = XSCREEN.
CS_CONTROL_PARAM-GETOTF = LS_ITCPO-TDGETOTF.
CS_CONTROL_PARAM-LANGU = NAST-SPRAS.
CS_CONTROL_PARAM-REPLANGU1
CS_CONTROL_PARAM-REPLANGU2
CS_CONTROL_PARAM-REPLANGU3
CS_CONTROL_PARAM-STARTPAGE
ENDIF.
ENDFORM. " set_print_param
*& Form add_smfrm_prot
text
--> p1 text
<-- p2 text
FORM add_smfrm_prot .
DATA: LT_ERRORTAB TYPE TSFERROR.
DATA: LF_MSGNR TYPE SY-MSGNO.
FIELD-SYMBOLS: TYPE LINE OF TSFERROR.
get smart form protocoll
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
ERRORTAB = LT_ERRORTAB.
add smartform protocoll to nast protocoll
LOOP AT LT_ERRORTAB ASSIGNING .
CLEAR LF_MSGNR.
LF_MSGNR = <FS_ERRORTAB>-ERRNUMBER.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
MSG_ARBGB = -MSGID
MSG_NR = LF_MSGNR
MSG_NR = -MSGV4
EXCEPTIONS
OTHERS = 1.
ENDLOOP.
ENDFORM. " add_smfrm_prot
*& Form protocol_update_spool
text
-->P_1115 text
-->P_LS_SPOOLID text
-->P_SPACE text
-->P_SPACE text
-->P_SPACE text
FORM protocol_update_spool USING SYST_MSGNO
P_LS_SPOOLID
P_SPACE1
P_SPACE2
P_SPACE3.
syst-msgid = 'VN'.
syst-msgno = syst_msgno.
syst-msgv1 = p_ls_spoolid.
CONDENSE syst-msgv1.
CHECK xscreen = space.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
msg_arbgb = syst-msgid
msg_nr = syst-msgno
msg_ty = syst-msgty
msg_v1 = syst-msgv1
msg_v2 = p_space1
msg_v3 = p_space2
msg_v4 = p_space3
EXCEPTIONS
OTHERS = 1.
ENDFORM. " protocol_update_spool
This is Include ZSDI0003
*& Include ZSDI0003
TABLES: KOMK, "Communicationarea for conditions
KOMP, "Communicationarea for conditions
KOMVD, "Communicationarea for conditions
VBCO3, "Communicationarea for view
VBDKA, "Headerview
VBDPA, "Itemview
VBDPAU, "Subitemnumbers
CONF_OUT, "Configuration data
SADR, "Addresses
TVAG, "Reason for rejection
VEDKA, "Servicecontract head data
VEDPA, "Servicecontract position data
VEDKN, "Servicecontract head notice data
VEDPN, "Servicecontract pos. notice data
RISERLS, "Serialnumbers
KOMSER, "Serialnumbers for print
TVBUR, "Sales office
TVKO, "Sales organisation
ADRS, "Communicationarea for Address
FPLTDR, "billing schedules
WTAD_ADDIS_IN_SO_PRINT, "additional
WTAD_BUYING_PRINT_EXTRA_TEXT, "texts belonging to additional
VBAK, "Sales Document Header
VBAP, "Sales Document Item
VBPA, "Sales Document: Partner
T001, "Company codes
MAST, "Material to BOM Link
STKO. "BOM Header
INCLUDE RVADTABL.
INCLUDE RVDIREKT.
INCLUDE VEDADATA.
data for access to central address maintenance
INCLUDE SDZAVDAT.
TYPE-POOLS: ADDI.
DATA PRICE_PRINT_MODE(1) TYPE C. "Print-mode
DATA: RETCODE LIKE SY-SUBRC. "Returncode
DATA: REPEAT(1) TYPE C.
DATA: XSCREEN(1) TYPE C. "Output on printer or screen
DATA: BEGIN OF STEU, "Controldata for output
VDKEX(1) TYPE C,
VDPEX(1) TYPE C,
KBKEX(1) TYPE C,
KBPEX(1) TYPE C,
1) you shouldn't have to do anything with the properties file written for a specific Locale.
2) check this out: http://java.sun.com/j2se/1.4/docs/guide/intl/encoding.doc.html
3) BIG5 is BIG5 everywhere.
4) don't know about this one
5,6,7) If you have Windows 98 Chinese Edition, you can probably switch back and forth between English and Chinese -- just put the Chinese characters in a string much like the normal characters. Otherwise, you'll have to enter the Unicode char.
V.V. -
Need help in smartforms page break
HI Experts,
I need yout help in Smartforms.
My requirement is I want to check my current page count with total number of pages in smartform.
Based on above , I wish to print some text only on the main window of last page.Currently, the text is getting printed on all pages.
Steps taken:
1) SFSY-FORMPAGES & SFSY-PAGE already checked but both of them get set simultaneously so the concept doesn't work.
2) Tried creating a custom FM and using total number of line items available at ITEM level . Doesn't work .
Any help would be highly appreciated.
Thanks,
Abhinav.Hi sap_wiz,
I have 2 pages into my smartform ( FIRST & NEXT ). The SFSY-FORMPAGES parameter is not getting set at the trigger of MAIN window of FIRST page .
If I check the value both FORMPAGES & PAGES parameter are 1 and on next page it gets set as 2 & 2. So I am not able to use SFSY concept.
Hi DeepakNandikanti ,
I wish to print the text at the end of MAIN window towards the FOOTER of table ( MAIN window has a table ) and not outside the window.
Thanks,
Abhinav. -
Hi Friends,
I am working on a smartform. This is a modification to the existing form. In the Smartform i have 3 pages. For page2, there are 3 scenarios. There is a custom table (Say gt_customtable). It contains Document ID field (DOCID), and for each document id, it has a indicator field (Say indicator = E / S). E = Emergency order, and S = Stock order.
When the indicator is E for the docid's, then Scenario 1 should be printed, that is Emergency layout should be printed.
When the indicator is S for the docid's, then Scenario 2 should be printed, that is Stock layout should be printed.
When the indicator is both E & S, then Scenario 3 should be printed, that is Emergency layout should be printed first, and then Stock layout should be printed.
There is an internal table called gt_page2, which has both the Header data, and Line items data.
The header data is same for all the scenarios, and need not be changed. But coming to the Line items data, emergency layout is different from stock layout.
How do i approach this situation. Can you please help me out here.
Thanks,
NikhilHi Suneel,
Thank you very much for replying. Actually Page3 has nothing to do with page2 here. The Issue is Page2 has 3 scenarios. The layout for each of 3 scenarios is different. Indicator is E for Page2-scenario 1 layout, and S for Page2-scenario 2 layout. But when the indicator is both E, and S....then Scenario1 is printed first, then scenario 2.
Do we need to create 2 tables, one for each scenario, each with different layout. Or create a flag, and depending on this flag, can we play with text elements in the layout by giving them in the conditions tab.
Thanks,
Nikhil -
Need help on smartform to print purchase order.
Hello all,
I need your help. I am struck in the following problem. In transaction ME23N for displaying purchase order, you enter the
purchase order number and then you click on print preview and print off from the printer icon in the top of the preview. My client
wants me to remove the print button or print icon from the print preview of the purchase order. How can i accomplish this? Iam new to
abap, plz help me out... thanks in advance...
Is there any user exit/ field exit to accomplish this? Or is there any better alternative to this... please let me know at the earliest possible. thanks
Cheers,
Jwelit.You need to change the driver program of the Smartform to restrict to only Print Preview.
If you are using any standard Output/message type than you need to copy that to your Z output type. Tcode NACE can help you. Than you need to copy the driver program attached to your output type.
Now, in your copied Z program, you need to set some parameter of the Smartform FM.
DATA: LS_COMPOSER_PARAM TYPE SSFCOMPOP.
LS_COMPOSER_PARAM-TDNOPRINT = 'X'.
Than you need to pass this to your SMARTForm FM.
Like:
CALL FUNCTION LF_FM_NAME
EXPORTING
ARCHIVE_INDEX = TOA_DARA
ARCHIVE_PARAMETERS = ARC_PARAMS
CONTROL_PARAMETERS = LS_CONTROL_PARAM
MAIL_RECIPIENT = LS_RECIPIENT
MAIL_SENDER = LS_SENDER
OUTPUT_OPTIONS = LS_COMPOSER_PARAM " <<
ZXEKKO = L_DOC-XEKKO " user_settings = ' '
ZXPEKKO = L_DOC-XPEKKO
Regards,
Naimesh Patel -
Need help on smartform spool generation for payslips
Hi Experts,
My development of Payslip form is done, its all fine.
Here is some clarification I need on the spool generation:
First time I run the program for 2 employees, I get 2 pages one for each employee, as expected.
When I again run the program for 2 employees, 2 pages are added to the same spool request.
My requirement is to create a new spool when the program is executed for the next time. I have tried setting NO_OPEN and NO_CLOSE in control parameters and also I have tried with several output option settings. I have also tried using FMs SSF_OPEN and SSF_CLOSE. But no luck so far.
Please note that this is HR Payslip hence the smartform is being called inside the GET PERNR loop.
Thanks in advance.Hi,
Here you can find the list of preconditions in order for Spool system to append to existing spool. Setting TDNEWID suggested by Nick will work and is the best solution if you wish to have each document in own spool. If you wish to have spool per job, you'd have to ensure that just the first document is output with TDNEWID set. You can also ensure spool separation by outputing the last document of the job by setting TDFINAL print parameter. Or you can ensure that spools will always be assigned a unique Title...
cheers
Janis -
HI
in my company in MM module MM people generating Purchase Order
So we r using smartform for Purchase order.
actually problem is company is having another 3 Group compnies.
each and every company want different layout and formating for each page
in print layout. .
so how can i do it by using single smartform .
or is there any way to do it.
please help me .
thanks in advancedhi Shukla,
assume u wnt to design smartform for 3 companycodes.. but each them want different output format.
u can achive this by using condition tab..in each of the node...
or another way is inside the page>create 3 FOLDERS> for this give the condition of the company code are whtever u want to differentiate....
it mean at purticular time system will trigger only one folder based the complay code you have.
In this folder insert the node u require to print for the purticular company code.
by above u r first problem will be solved.
another problem is... somebody wants the page in horizantal(portrait) and sombody wants it in vertical(Landscape)... if it is for the u have to include more pages in you form.. use the conditions..to ensure it should tribgger only for the required company code.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K -
Need Help in Smartforms - multiple pages
Hi all,
I have developed a Smartform in which i have 2 PAGES.
in the First Page : there are many windows .
Due to space crunch , i can only print a single line / first record alone in the Main Window. the size of the MAIN window is also small .
then i have specified the PAGE2 as the NEXT page.
In the Second Page i have to print the other remaining data in the MAIN WINDOW.
the problem i am facing is :
1. I cant have a MAIN WINDOW in the FIRST page because we cant have a MAIN page if we are going to specify PAGE2 as the next page. Due to this reason i have no MAIN WINDOW in the FIRST PAGE. IN the PAGE2 i have placed the MAIN window.
2. How to make the remaining data print in the PAGE2. I am able to print the first record in the FIRST page.
Kindly tell in the steps i have to follow , to PRINT THE FIRST RECORD IN THE FIRST PAGE AND THE REMAINING DATA IN THE SECOND PAGE.
Thanks and Regards,
Vikki.Hi,
Please declare window(Not main window) in first page, Display one record in first page,
and declare main window in second page give remaining entries in second page.
Just now i have checked, it is working perfectly as per above solution.
Regards
Jana
Edited by: Janardhan Reddy on Sep 22, 2008 12:40 PM -
HI Need help ob Barcode in smartform
Hi All,
I need help on how to create and print a barcode in smartforms ? explain step by step how to do ?
Thanks,Hi,
THIS IS TO CREATE THE BARCODES.
1.CREATE THE PARAGRAPH AND CHARACTER FORMATS BY USING THE u201CSMARTSTYLEu201D TCODE R SELECT THE u201CSTYLEu201D RADIOBUTTON IN u201CSMARTFORMSu201D TCODE(WHICH IS CREATED FOR SMARTFORMS).
GIVE u201CP1u201D AS PARAGRAPH FORMAT
CLICK THE u201CFONTu201D TAB,THEN ENTER THE FOLLOWING
CREATE THE NODE FOR CHARACTER FORMAT
SELECT THE BAR CODE NAME AS u201CBC_EAN8u201D
CLICK THE u201CFONTu201D TAB AND CHANGE THE OPTIONS WHICH U WANT.
Enter the details in u201CHeader Datau201D.
SAVE,AND ACTIVATE IT.
CREATE THE SMARTFORM AS u201CZCS_FORM6u201D.
Click on u201Coutput optionsu201D tab in which text node u want to add the barcode, select the style as u201CZCS_STYLE6u201D and go back to u201Cgeneral attributesu201D.
Use Line editor to add the barcode in Text node
After come BACK FROM THE LINE EDITOR.(ABOVE SCREEN),THEN U CAN C THE FOLLOWING SCREEN FOR DATE FIELD.
Regards,
Chandu -
Need help in printing text in footer
Hi Friends,
I need help from all you guys. I am working on SmartForms, and need help. Please look into the below situation, and appreciate if you can help me out.
The Literal **DATA CONTINUED ON NEXT PAGE** is to be displayed at the bottom of the
page in the Footer only if the data rolls onto second page.
Thanks,
NikhilHi,
define the two variables in the global definition as
g_cnt type sy-tabix.
g_flg type c .
->in the initialization tab pass the internal table that is the main window.
g_cnt = lines( the table name which you are using in the main
window before the footer).
Now you have the total no of lines in the g_cnt.
in the loop which is in main window create the program line pass the output parameter as g_flg.
in the condions tab give the condition as g_cnt = sy-tabix.
in the source code of that program lines
g_flg = 'X'.
now for the footer where you are displaing the text coutinued on next page for in codition tab give the condition as g_flg = space.
Thanks,
NN. -
Do we need to activate smartform whenever we change txt in TXt Mod via SE63
Hi Experts,
Just a quick question to get the changes done in one of the text module to the output , Is that mandatory to activate smartforms where its being called..?
In short , do we need to activate smartform when ever we do change in text of one of text module via SE63..?
Apprciate your help on this ...
Thanks
Ramsai..Hi ,
Thannks for ur reply ...
But still I am not convinced... why should I go for SOTR_TEXT ..
We have a Z text module contents in ENg ...due to req... we have translated it to french via SE63 ..
and transported to Test sytem... where business tested and recommend for text chnage ..
So I have updated that french text in DEV the same way via SE63..
( text module contains updated French text , I checked this TM contents by login as a French login lang)
But when we triggered the output , it still contains old text ....? I have no clue why ..
Bit cnfused... Appreciate you r help in advance..
Thanks
Ramasi -
Plzzzzzzzz i need a helpin smartforms
Hi i need a small help in smartform
My problem is like this
Yesterday i got a problem in my smartform in which
after the total amount the data or text which i had entered is printing immediately after the total but i want to leave that place and it should be printed in the next page so i had created a command in the smartform by Inserting a command after the total is printed and check the Go to Page option and specified the same page as the next page. The printing is started on a new page after that.
But the new problem is that either if there is text or not in printing it was leaving a blank page so how to avoid the blank page while there is no text or data but i have to go for new page after total is printed can u make me any suggestions plzzzzzHi Mr. Manoj the page was deleted by using your suggestion but as isaid earlier i want the page to be deleted and also if there is any text after the total then it should be printed in the new page but not after immedialtely but now by using your suggestion the blank page was deleted if there is no text but if there is text the text is printing immediately after the total so please try to understand my problem and give more suggestions
-
Need help to develop Pythagoras theorem-
Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it startPardon my ASCII art, but I've always liked the following, simple, geometric proof:
a b
---------------------------------------+
| | |
a| I | II |
| | |
---------------------------------------+
| | |
| | |
| | |
| | |
| | |
b| IV | III |
| | |
| | |
| | |
| | |
| | |
| | |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again: a b
---------------------------------------+
| . VI |
| . . |a
| V . |
| +
| |
| . |
b| . |
| |
| IX |
| . |
| . |b
| |
+ |
| . |
a| . . VII |
| VIII . |
---------------------------------------+
a bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos -
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
-
Need help to open audios attached in a PDF file
Hello
I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
Please help me on what to do.
ThanksAudio and video are not currently support on Adobe Reader. :-<
You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99)
Maybe you are looking for
-
IPod shows up in system profiler but not in /dev and disk utility
Hi, I have a Problem with my iPod. It works perfectly when I connect it to other macs. Though on my mac it appears only in the system profiler, but not in itunes, /dev or diskutilities. Other USB devices are working correctly. I already reseted my ip
-
MacBook Pro (Late 2008) Screen Backlight won't turn on
Yesterday, I pulled out my MBP and started it up. The screen was "black," and at first I thought that it was totally dead, but a closer inspection revealed that the display was working, but the backlight wasn't turning on. I restarted, and the backli
-
I am running OS X 10.8.3 and using Mail 6.3 (1503) on a 2012 Mac Pro with 16 GB memory. The issue I am having is: All new mail shows up in the inbox as though they had been "Read" when I have not read them at all? The typical blue dot indicating new
-
Error during SAPINST start u201C iaextract :c ; 268 no space available in dev
Dear All, I am installing SAP ECC6 7.0 under oracle 10.2 and AIX 6 . I am created /home/install and want to install sap in that path with ( cd /home/install ) when I run SAPINST sap extract file when extract completed ( with in same screen ) error
-
i am trying to mirror my mac book pro. I can't find the apple tv icon anywhere except in iTunes. I tried displays and not there either.