Need help scripting the Essentials Server Backup configuration in PowerShell

I'm trying to write a PowerShell script that automates the setup and configuration of the Server Backup feature within WS2012 R2 Essentials. There are a number of cmdlets for defining the backup source files and target location such as add-wssbackuptarget,
add-wssbackupvolume, new-wssbackuptarget, etc.
These cmdlets all have a required -Disk parameter and I can't for the life of me figure out the syntax for it. I've tried the disk ID, drive letter, LUN, volume label, and disk number. All of the examples in the help files are using variables instead of
explicitly entering a value; I've tried using the example scripts and those fail too.
So here's a quick example:
Get-WssBackupPolicy | Add-WssBackupVolume -Disk ??
I obviously need more parameters than that but the point is, no matter what other parameters I type and no matter what I enter for the value of -Disk, I always get "Cannot bind parameter 'Disk'. Cannot convert the "D:\" (or whatever I've entered)
value of "System.String" to type "Microsoft.WindowsServerSolutions.DataProtection.ServerBackup.ObjectModel.BackupDisk".
And like I said in the opening paragraph, I get that same error for any and all cmdlets that use the -Disk parameter. Does anyone know how to properly structure format the -Disk value?
Thanks

Don't worry I wasn't sure as well, I had to raise a SR to understand it too!
I have a similar set up to yours and have webutil working successfully.
What you need to do is to install and configure your application server on unix for webutil as well as windows.
From your post I see you are already reading the docs. Within chapters 2 and 3 both of which are titled "configuring web util", you will see points that refer to the application server, these are the ones that you need to follow.
Good luck

Similar Messages

Need help in the CRM Business Package Configuration in EP

Hi,
I have uploaded CRM BP 60.2.3 on EP 6.0 WAS 6.40. I have configured and assigned the WAS System parameters and CRM System parameters. But still, when I preview an iview for ex. B2B Shop, the following portal runtime error is coming.
Portal Runtime Error
<b>An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.pct.crm.crmcontext.
Exception id: 09:19_29/09/05_0008_8412351
See the details for the exception ID in the log file</b>
Please help me out in this problem.
Thanks much in advance,
Sunitha.S

Hi Siddarth,
The BP installation was successful. I have configured and assigned the CRM System and did the user mapping too.
I still am getting the Portal Runtime Error as below:
<b>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_CRM'. Please check the system object and the alias..
See the details for the exception ID in the log file</b>
Is there anything else, which needs to be configured in the CRM System like services etc?
Please help me out in this regard..
Thanks much in advance,
Sunitha.S

Need help with the Modulation Toolkit to configure a QPSK Modulation

Hi! I'm
trying to build a CDMA system with the Modulation Toolkit to use it later with
a PXI-RF Product as a part of my thesis (I don't remember the exact model
number because it's in my university and I'm home right now, sorry). But my problem right now is, I assume, a very simple one.
I'm having
some trouble understanding the MT Modulate PSK.vi and the MT
Demodulate PSK.vi since I have them both connected and the output bit stream is
not the same as the input bit stream. I'm guessing it's a problem with the sync
parameters in the MT Generate Synchronization Parameter.vi because maybe I
don't really understand how the sync bits work. I tried using a simple
sync header but the output bit stream is always shorter than the input and shows
only a little portion of the input bit stream and some of the 1's I used to
create the sync header, and it gets worse when I increase the number of input
bits.
I'm
attaching the simple vi I created to try to understand the mod-demod vi's, so
if someone knows what I'm doing wrong it would be great if you let me know
since I'm stuck in my thesis and understanding this issue will let me continue
with the project.
Thanks a
lot in advance!
Daniel
Attachments:
QPSK Test V-1.0.vi ‏31 KB

Por favor mire en enlace abajo:
Cordiales Saludos
http://forums.ni.com/ni/board/message?board.id=6170&message.id=11549&jump=true
Luciano Borges
National Instruments Brazil
Luciano Borges
R&D Engineer
Pirelli Brazil

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

Jennymbell, never fear help is here!
Have you tried contacting your IT department for assistance? You can visit http://bit.ly/QECbGh for steps on how to enterprise activation.
Keep me posted if you need further assistance.
John B
Follow us on Twitter @VZWSupport

NEED HELP!! i restore backup at the wrong iphone

NEED HELP!! i restore backup at the wrong iphone
i have 2 iphone 4s.. i already have backuped the 1st iphone, then the 2nd iphone not yet backuped.
when i plug the 2nd iphone it restore the backup of 1st iphone.. now the 1st and 2nd iphone has the same files... the original files of 2nd iphone has gone, how to restored the original files of 2nd iphone since i restored the backup of 1st iphone.and i do not have backup for the 2nd iphone. >.< PLEASE HELP!!!!

With no backup for the 2nd iPhone, you can't.

Need help regarding the location of Exchange 2013 Logs for parsing

Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
Matt

Audit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

Need help setting up LDAP server for Address Book

I've set up Panther servers before for AFP which is pretty simple but now the office I work at wants me to setup an LDAP server so they can share the same contact information, probably about 2,000+ entries. I'm guessing that this will have to be entered in the LDAP server entry by entry.
I need to know how to setup the server and what settings need to be on the clients' computers, such as in Address Book.
The server is an older G4 tower and I've got 8 computers hooked up to it on a simple network. I don't think I'll need to make the LDAP server accessible from outside the network but it's something I'll have to worry about for the future.
Thanks for any help you can offer.

bump

Problem with SCs that created before the Name Server was configured

Hello,
I have created an SC and developed it.
When I created it, the Name Server wasn't configured and because of that, when I created new DC for this SC I needed to write the vendor manually. Lets assume I wrote example.org.
Sometime after I did configured the Name Server and I reserved example.org as a namespace prefix.
When I create new SC and new DCs in it everything is OK: Instead of writing example.org as my vendor I can choose from a combo box between sap.com and my own which is example.org.
The problem arises with the SC that has been developed before the Name server was configured: If I create new DC for it the vendor is shaded with sap.com inside with no option to change it, even though the previous DCs for this SC were created under the vendor example.org (which I entered manually).
I assume I can (with a lot of manual work) create new SC and move the DCs (or only their code) to the newly created SC, where I have the option to choose, but I am looking for more simpler solution. For example, changing a certain configuration file at the SC or so.
Anyone has an idea?
Thank you in advance,
Roy

Anyone...?

Do we need to restart the Tomcat server each time when we modify servlets?

Hi Friends,
Do we need to restart the Tomcat server each time when we modify servlets. Or is there any otherway to achieve the functionalitly?
Thanks and Regards,
JG

JamesGeorge wrote:
Hi kajbj,
Java guys are mostly using TOMCAT,so for me it seems to be the best place.That's not correct. Most people who are writing stuff for the web might be using Tomcat, but there are lots and lots of Java applications that aren't for the web.
Is there any other reason behind your question.Yes, this forum is named "New to Java" and Tomcat questions shouldn't be asked here, even if people knows the answer to you question. You will probably get better and more detailed answers in a Tomcat forum. All othe guys there are actually using Tomcat, and they know the small differences between the different versions, and how they behave on different operating systems. They do also know if you need to make configurations changes, and where you should make them.
So in future, please ask questions in a forum that is specific to the product that you are using.

Need help finding the best Mac for gf

hi I need help finding the best desktop. I am looking to buy MAC for gf.
she uses final cut program question is does the GB/RAM/STORAGE matter on performance?
She has a 2009 Apple computer I want to upgrade her to a new one
I Dont know much when it comes to specs. She edits tons of videos and pictures.
what's recommended for a video/photo editor that's good in performance ?

Pro consumer might go with iMac even.
Final Cut Pro latest benefits from dual AMD graphics.
Video is one animal, graphics a much different.
Great site full of performance, buying and configuration ideas:
MacPerformance Go to the main topics
I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
Barefeats
Rumors Pro
Visit the forum for FCP-X would be a place to start.
Final Cut Pro X

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help suiting the old apple I'd because I do not remember anything associated with that email and I don't know the security questions

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.

You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)?

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

I need help with the iPad Remote app to connect to apple TV 2

I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something

Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
 Cheers, Tom

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

Need help scripting the Essentials Server Backup configuration in PowerShell

Similar Messages

Maybe you are looking for