Need Help to develop a Funnel Graph Report using Multiple Subject Areas.

Hi Everybody,
Did any body developed Funnel based graph report in Answers..
Scenario: I need to develop a report which is based on 4 Facts(4 Subject Areas) Report is sectioned with 4 block one blovk with one Fact Metrics like this four blocks.
If any idea on such scenario it will be huge benefit for me.
Thanks in advance.
Thanks,
Govardhana

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

Similar Messages

Report from multiple subject areas

Hi,
I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers.
Is there any other tool from OBIEE suite where I can design it?
Thanks

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

Historical Reporting With Multiple Subject Areas

Hi All,
I am working on to decide the best way to create repository. I do have a requirement from my client that they need to see both Current and Historical Reporting via OBIEE. I am keeping Type 2 SCD. My model consists of about 30 fact tables - each of them represents a business process/event.
Following are my options:
1) One Subejct Area to keep current/historical reporting. Here the joins would be based on PK/FK relationships with Effective Start and Effective End dates. There is a flag in all tables to find the most updated record. Users can use the flag to find the most updated record or use Effective Start and Effective End dates to go point in time.
2) Create two Subject Areas - Current and Historical reporting. Current one will include the flag logic to get the most updated record in RPD
3) Create multiple Subject Areas for each Fact table and use Combining Multiple Subject Area approach to join Subject Areas. Additionally, create one Subject Area for Historical Reporting (that will have all the tables in one SA)
I am thinking of going ahead with option 3) This will have Subject Areas for all logical facts (for Current reporting) and one Subject Area for Historical reporting.
Is this a standard design? Any inputs?

You should try both Complex folders as well as custom folders and see which gives you better performance. Discoverer SQL optimizations for example apply only on Complex folders and not on simple folders.
If you define the joins between the two tables, you can still use items from them in your Discoverer report without having to create a complex folder on them.
And finally, you can always create a view or materialized view and use that MV in your Discoverer query.
thanks
Abhinav
Oracle Business Intelligence Product Management
BI - http://www.oracle.com/bi
BI - http://www.oracle.com/technology/bi
Blog - http://blogs.oracle.com/
BI Blog - http://oraclebi.blogspot.com/

Need help to develop Pythagoras theorem-

Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it start

Pardon my ASCII art, but I've always liked the following, simple, geometric proof:
     a                   b
---------------------------------------+
|       |                                |
a|   I   |              II                |
|       |                                |
---------------------------------------+
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
b| IV   |              III               |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again:     a                   b
---------------------------------------+
|               .             VI         |
|     .                 .                |a
| V                               .      |
|                                        +
|                                        |
|   .                                    |
b|                                     . |
|                                        |
|                  IX                    |
| .                                      |
|                                    .   |b
|                                        |
+                                        |
|      .                                 |
a|               .                  . VII |
| VIII                   .              |
---------------------------------------+
                 a                    bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos

Need help in developing BADI for IT0001

Hi All,
I need help in developing BADI for IT0001.
On IT0001 create or change, there is need to update IT0017 with following data from IT0001
-Company Code
-Cost center
-Business Area
-Begin and End Date.
Other fields from IT0017 need to be derived from Position and update in IT0017.
Please guide me how I can address this. I do not want to go for dynamic action, as it is not getting evoked during background jobs.
I am new to BADI development and will appreciate step by step instructions.
Thanks

Hi,
     follow the below steps to achive
Steps:
1.     Execute Business Add-In(BADI) transaction SE18
2.     Enter BADI name i.e. HRPAD00INFTY and press the display
        button
3.     Select menu option Implementation->Create
4.     Give implementation a name such as Z_HRPAD00INFTY
5.      You can now make any changes you require to the BADI within this
        implementation, for example choose the Interface tab there are 3 methods avialble
6.     Double click on the method you want to change, you can now enter
        any code you require.
7.      Please note to find out what import and export parameters a
        method has got return the original BADI definition
        (i.e. HRPAD00INFTY) and double click on the method name
        for example within HRPAD00INFTY contract is a method
8.      When changes have been made activate the implementation
<b>Reward points</b>
Regards

Need help on struts configuration with ColdFusion 10 using IIS

We need help on struts configuration with ColdFusion 10 using IIS.
Earlier we were using ColdFusion 8 with IIS 6 for one of our application. This application internally calls struts. After upgrading to ColdFusion 10 struts calls are not loading. We get 404 error.
In ColdFusion 8 struts were configured using actions extension .do in IIS from this file-
C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll.
But in ColdFusion 10 this file is not present as ColdFusion 10 uses Tomcat in place of Jrun.
Also there is no information in ColdFusion log file.

Duane wrote:
doctormirabilis, Welcome to the discussion area!
1) how can i configure the time capsule in order to operate as a remote base station synchronizing with the relay using the ethernet port?
Configure the Time Capsule to act as a bridge (not distributing IP addresses). Also configure the Time Capsule to create an 802.11n wireless network with a unique network name (SSID). That's it.
2) how can i avoid that my powerbook while accessing my wireless network does connect through the relay station instead of using the time capsule?
Configure the Time Capsule to use a different network name than the WDS link between the 2 AirPort Express (AX). Configure the PowerBook to use the Time Capsule network.
There are 2 pieces of information that you should be aware of...
(1) None of the PowerBooks are capable of 802.11n.
(2) The WDS link cuts your available bandwidth in half. So the wireless link to your neighbor's has a maximum potential of 27 Mbps.
Let's for a minute assume that you have a Mac compatible with 802.11n. In your configuration the time you could take advantage of the 802.11n speed is when the Mac is sending/recieving data directly from/to the Time Capsule.
There would be NO speed increase in Internet access. The speed of Internet access is going to be controlled by the slowest link in the path to the Internet. That is probably the connection to the ISP. The next slowest path is the WDS link to your neighbor's.
Duane,
I am in a similar situation, sharing internet with my neighbor. Do you think it would be plausible to hook up a vonage phone adapter to time capsule's ethernet port if time capsule is bridging from my neighbor's router in the configuration you have described? A check of my upload speed shows 1.67Mbps (powerbookG4 w/ airport extreme). Vonage reccommends 90kbps minimum upload speed. Am I going to lose some speed putting the Vonag adapter behind time capsule?
Thank you

I Need help!!! The card I used when I first set up my account I lost it so now I can't download any music cause it's wanting a number of that card I lost... Someone tell me what I can do???

I Need help!!! The card I used when I first set up my account I lost it so now I can't download any music cause it's wanting a number off that card and I don't have it anymoe... Someone tell me what to do please???

Add another good card and delete the old one, Yu can also purchase and redeem an iTunes gift card and hthen delee the bad credit card. Yu need a valid payment method for update as well even purchasing free apps if the account was set up with a credit card.

Report with multiple Detail Area

Hi All,
Please see the Report pointed to the link below:
[Report with multiple Detail Area|http://us.share.geocities.com/felix5ac/fairway.jpg]
Some Explanations:
========================
(1) The line with "ABCDEFGH..." is variable data coming from the database in the Detail Area
(2) The lines with "WBLNX'" "123, 123.12",
"WBLNX'"
are variable data associated with the same Heading: "ABCDEFGH..."
(2b) There can be multiple lines of data in the detail area (i.e. 1 or more "ABCDEFGH..." and the associated WBLNX and numbers...)
(3) Item Code Descriptions ==> is a Header Info
(4) ARL ... and FPHI... ==> are variable data and lines in these area can be 1 line; it can be 4 lines; it can be 10 lines...
(5) Lines FROM "Artwork Procedures..." to the the end of the page are static.
QUESTION:
===================
How do I best design these Report with the multiple detail areas? Again, please see link of the Report above...
Thanks and Best regards,
Felix

Hi Felix
You can place the less detailed fields in the regular sections of the report and wherever you require multiple lines you can use the subreports.
Hope this helps.
Regards
Nikhil

How to generate a single report using multiple Databases

Hi All
Is it possible to create a single report using multiple databases
I am working on Database A to generate reports usually,, but now i have a second database for which the data is coming from flat files now i have to use few tables from
Database B to generate a single report,,,,, can any one help with the process

Hi,
i didn't see this properly in your post:
but now i have a second database for which the data is coming from flat files if you have ETL then make flat files as source then create target tables in db:B itself.. .Now, import them in the rpd..
If not, import both those tables into rpd with different connections..
Create physical joins by selecting those tables and perform joins operations over db's in physical layer..

Need help to develop a custom connector

I need some help on developing the custom connector to Homegrown application and the version i am using is OIM9.0.3
First of all what are the steps do we need to care while developing a custom connector.
I can't able to find the process in google to develop the custom connector.
If you have any data regarding the development of custom connector, plz share to me....
What are the thing do we need to take care while developing the connector.
I referred in OIM9.1 version there was an option to develop the Custom connector by using Genric technology, can we create the custom connector by using the GTC feature in OIM 9.1
early response will be appreciated

The docs for the new GTC framework are here: http://download.oracle.com/docs/cd/E10391_01/doc.910/e10360/about.htm#Toc153968019. GTC is useful if you target application exposes standards-based SPML (Service Provisioning Markup Language) user management interfaces, although it sounds like this isn't the case for you.
You will most likely need to go the traditional route in terms of connector development, which involves building OIM Process Task Adapters to invoke the application API's (I assume they're Java?) and invoking those adapters from within an OIM Provisioning Process.
Rob

Need help in identifying fields of sd report creation

Hi Experts,
I need to create report in sd from manual report .The fileds in report are taken from Quickbooks.so inorder to create report in sap I need to identify fields in sap first.we dont had functional guy so i need help in identifying fields in sap for below mentioned report.
Report: invoice distribution report-service billing for all states.
Fields:customer number,customer name,city state,SAP Document number,Invoice date,period(month,year)invoice number,invoice type,currency,invoice amount in usd.
Please help me in suggesting tcodes or table names from where i can fetch these fields.
Thanking you in advance.
Regards,
narasimha.

Hi Experts,
Finally with all above suggestions i have chosen tables vbrk(billing document header data),kna1(customer header),vbrp.
1.I created view to find the output of report with conditions as follows:
tables:vbrk,kna1,vbrp
vbrk-vbeln(invoice number)
vbrk-fkart(invoice type)
vbrk-fkdat(invoice date)
vbrk-waerk(currency)
vbrk-netwr(netvalue)
vbrk-kunag(customer number)
kna1-name1(customer name)
kna1-ort01(customer city)
kna1-regio(customer state)
join condition:
kna1-mandt=vbrk-mandt
kna1-kunnr=vbrk-kunag.
when i execute the report i am getting same value for lot of times.
i am confused how to include sales document number.I hope sales document number and invoice are different.
2.i have also added vbrp-aubel and join condition as
vbrk-mandt = vbrp-mandt
vbrk-vbeln = vbrp-vbeln.
but when i execute the report i am getting lot of duplicated with same value and unknown invoice numbers.
please let me know where i went wrong.
is there any standard adhoc report so that i can manipulate it with above requirement.
vf05n is somewhat useful .is it possible to add customer details in this??
Thanks&Regards,
narasimha.

Need help connect Access Database to Crystal Report Viewer in java

Need example for passing parameters to PropertyBag Class and IConnectionInfo Class.
We use CR_JRC_11.8
Thanks

A sample that demonstrates how to change the database that a report uses at runtime in the JRC can be found at the following link on the SAP Portal:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0ad3d3d-be66-2b10-2181-f46c6e05a420
To help determine what connection properties need to be changed at runtime through code, create a copy of your original report and use the Crystal Reports designer to change this report to new datasource manually. You can then use the jrc_display_connection_info helper sample to examine what the parameters should be in the property bag before setting the IConnection information. The jrc_display_connection_info helper sample can be found at the following link on the SAP Portal:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706202a4-bd66-2b10-4e8b-92f4a8024ea1
Hope these samples help.
Regards.
- Robert

Need help in developing mobile app using SAP

Hi
I have a team of Android, iOS and Windows developers and we are planning to start developing mobile using SAP and SAP Fiori. Need help in getting started with SAP mobile development like i need plugins and development kits that i need to use.
Thanks
Ram

Hi,
What help needed ?
For SAP Fiori Use this link : http://scn.sap.com/docs/DOC-41598
For SAP Fiori Installation and Configuration Steps: http://scn.sap.com/community/mobile/blog/2014/06/10/fiori-technical-installation-and-configuration-of-one-app-from-a--z
Which Software you will use to develop Mobile Apps in SAP Platform ?So that i will suggest what to do ..
Regards
Lokesh

Need help to develop centralized web application

Hello,
Please correct me if i am posting thread in wrong area.
I am going to develop web application for a university, a complete online portal for Teachers, Students and Administrators. There are more than 50 affiliated campuses of university in different cities. I need to develop centralized web application which all campuses' teachers/students/administrators will access from internet. Please guide me what hardware, module, development technique etc should i use.
I am using J2SE and Oracle10g to develop that application.
Thank You

Go to CustomInk.com. Their T-shirt Design App is not Flash based which is refreshing. Instead, they're using a sophisticated combination of CSS, JavaScript and PHP/MySql.
Digging a little deeper into the source code, it looks like the company that developed their T-shirt Design App is located in India and called No-Fresh.com
No-Fresh licenses their T-shirt Design App. You might want to contact them directly.
http://www.no-refresh.com/online-t-shirt-design-tool.php
Nancy O.

I need help changing the account number my daughter uses for payment for her apps and itunes, etc. can anyone talk me through this.

hi ,
im just a mom, not very computer savy.....however, I need to change the payment method my daughter uses to purchase things on her ipad due to the fact that the current one is expiring. ie: for such things like songs and games, etc.
I would appreciate any help as how to do so.
THanks

On a computer's iTunes you should be able to edit the payment info by going into the Store > View Account menu option (if you are not logged into the account that your daughter is using then Store > Sign menu option to log out of the currently logged in account ; that will then change to a Store > Sign In option so that you can log into her account) and log into the account (enter the account's password and click View Account on the popup)
And on the account's details page there should be a payment link.
If you are doing it on your iPad then tap on your id in Settings > iTunes & App Store (if not logged into her account then log out of your account via the popup that you get and then log in with her account) and tap on 'View Apple ID' on the popup and log into the account - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918

Need Help to develop a Funnel Graph Report using Multiple Subject Areas.

Similar Messages

Maybe you are looking for