Need help Using iphone5 with Bluetooth in 2006 Volvo xc90. I have paired my phone and can make calls. I want to play music on my iPhone using the car's sounds system.

I have just purchased a 2006 Volvo with Bluetooth. I have paired my phone with the car to make phone calls. I don't have a way to play my iTunes music through the cars audio system. Is there a special auxiliary adapter that I need to buy?

Nobody have notice this problem or have a tip for that?

Similar Messages

  • HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

    i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
    <Phone Number Edited by Host>

    You aren't addressing anyone from Apple here.  This is a user forum.
    You might want to call a neaby Apple store to see if they have a free class you could attend.

  • Can I play music from my iphone 5 through car speakers while my Bluetooth is on and paired? If so, how? Thanks!

    Thanks!

    The vehicle has to support the Bluetooth profile for playing music. I would check the user guide for the sound system in your vehicle and see.

  • Need help using the "skatter" function with brushes.

    I'm using Photoshop 7 right now. I want to use the scatter function with one of the standard brushes to make a star trail, but the problem is that the stars are too thick, there's too many of them. How do I tell it to draw less instances of the brush when I'm in scatter mode? So that it's only dropping 5 at a time or so?

    I have a control bar for "Master Diameter" but I can't find anything that says "spacing."

  • I need help using the target path tool

    Hi all,
    I realise that I need to keep all my code on the main timeline, so now I need some serious help with targeting movieclips and buttons, when I use the target path tool (the little gun sight in the action script panel) it lets me navigate to the thing I want, but when I use it's suggestion it very often doesn't work, and I am left using trial and error to work it out.  Ican get stuff to work, but I really have no idea why or how I am doing it, Sorry to be such a N00B, but I really think if I can work this out I am going to get somwhere.
    Cheers
    sub

    subtlefly72 wrote:
    Thanks kglad,
    OK that is basically what I have been doing, but its been a bit hit and miss, but maybe now I see why, your last sentence
    of course, all those objects have to exist at the time your code executes.
    So if I am referencing something inside a mc and it doesnt exist on the first frame there will be an error?
    exactly.
    also what is the       this.  Object() and Object(parent)  ??
    Do I need to be using these?
    not when using code on the main timeline.  "this" refers to the current scope which for code on the main timeline, is the main timeline.  the following are the same:
    this.mc and mc
    this.var1 and var1
    And still I want to know why the target tool gives me a path that doesn't work?
    i can't tell you much about the target tool.  i've never used it.  but i tried testing it just now and it seemed to work correctly to target a nested movieclip.  again, you must sure that object exists when your code executes so if you target something on frame 2 (or greater) of a movieclip using code on frame 1 of the main timeline, the reference may be correct but the object won't exist when your code executes.  there are a number of ways to handle that if it's your main problem.

  • Need help using the selection tool

    Hi all,
    I have some strange (to me) occurrences while using the 'quick selection tool'...
    Explanation
    I'm using PS Elements 11 on a Win 7 (64) PC.
    What I want to do is to create a new pic from an existing pic.  The existing pic's background is unsuitable for what I want.  But the FG is what I need.  I thought that selecting the FG object and placing into a new pic would be what I needed using the <quick selection tool>.
    To do this, I am trying to use the <quick selection tool>.  I've had varying degrees of success using it.  One main thing I don't understand & pretty much renders my project useless & undoable, is the fact that whenever I use <refine edge> so that I can refine my edge selection, my pic is immediately lost or taken away.  Since I have no idea as to what's happening, I am forced to close the pic (W/O saving changes, of course) & then re-opening the pic.  All's well until I click the <refine edge> button again, then, my pic disappears AGAIN! 
    My guess is that maybe the pic is somehow transformed to a layer or something.  But, how can I turn this behavior off and not make my pic disappear?? 
    There are a few more details about this <selection tool> that I'm muddy on.  Is there something where I can read more about its use?  I would love to know more, but how?  Where?
    I've now read the online manual part about selection tools.  Although it shed some light, I'm still needing more.
    I am not a constant user of PSE, rather,  I only use it on occasions.  Normally, I use its scanning features.  I may play around with a few other features, but I also know that PSE offers many other powerful features, I rarely, if ever, use.

    This is the Photoshop forum.  You want the Photoshop Elements forum:
    Photoshop Elements

  • I need help using the impdb utility on a different machine to the export...

    Hi all,
    I have recieved an export from a ClearQuest database, built on Oracle.
    It's a 6GB file xxx_full_dpdump.dmp, with a corresponding .log.
    This was exported from a different Oracle instance on a different machine.
    I'd like to import this dump file into my Oracle instance.
    I tried to use imp, and received the following error: IMP-00010: not a valid export file, header
    After a bit of reading, I think this may becase I should be using impdp.
    BUT... when trying to use impdp, I'm not sure how to structure the syntax? specifically, what is DIRECTORY?
    As this is export is from a different machine, the directory that it was exported to is not on my machine.
    When running ...
    impdp username/password directory=MyDirectoryThatContainsTheDmp DUMPFILE=xxx_full_dpdump.dmp
    ... I receive:
    ORA-39002: invalid operation
    ORA-3970: Unable to open the log file
    ORA-3907: directory name MyDirectoryThatContainsTheDpm is invalid

    Thanks, I'm using Windows XP SP3 and Oracle 11g (11.2.0.1.0)
    So I've now granted the right permissions, it seems and The Impdp now executes (Hoorar!)
    The command I'm running is:
    impdp username/password directory=DATA_PUMP_DIR dumpfile=xxx_full_dpdump.dmp REMAP_SCHEMA=MYUSER:Test;
    ... where MYSUER is who I'm logged in as running this command; and Test is just a word, I haven't created anything called this myself.
    BUT ... I get a few thousand errors around
    - Cannot add file ... file has an Oracle Managed Files file name
    - CREATE USer ..... failed tablespace XXX does not exist
    - lots of "already exists" errors for users and tables.
    Any ideas what I'm doing wrong? I though these would all be created as new items under MYUSER.
    Thanks so much!

  • Need Help Using the Report Painter

    Hi experts,
    i'm using report painter GRR1, how can i resize the Lead Column? i need it to increase its length, i had already maintained the texts(short middle and long texts).
    Thanks for the help,
    zryxel

    Go to FORMATTING > COLUMNS > Select the Format Group and Edit Column Width.
    Reward points if useful.
    Salamat!
    AJ

  • I need help using the "GetCursorPos" function in the user32.dll on a machine running Win98.

    I'm able to get the x axis information by setting arg1 to TYPE=Numeric, DATA TYPE=Signed 32-bit Integer, PASS=Pointer to Value. I wired a zero to the input.
    When I setup arg2 the same, LabView crashes.???
    This is the first time I've attempted to access a dll, and I'm not sure I'm on track with the operation and I appreciate any help with this matter.

    Hi,
    What you are doing now is:
    BOOL GetCursorPos(
    LPPOINT lpX // cursor's X
    LPPOINT lpY // cursor's Y
    This is not correct! The Api pop only one parameter from stack, and returns
    to the second. The second parameter should be the return andress (set
    automatically), but in your case it's a pointer to lpY! So LV crashes!
    This is the prototype of GetCursorPos:
    BOOL GetCursorPos(
    LPPOINT lpPoint // cursor position
    Wire a cluster to the first parameter (set the dll to "adapt to type"). the
    cluster should have two U32's in it.
    Regards,
    Wiebe.
    "_K_" wrote in message
    news:[email protected]..
    > I'm able to get the x axis information by setting arg1 to
    > TYPE=Numeric, DATA TYPE=Signed 32-b
    it Integer, PASS=Pointer to Value.
    > I wired a zero to the input.
    > When I setup arg2 the same, LabView crashes.???
    > This is the first time I've attempted to access a dll, and I'm not
    > sure I'm on track with the operation and I appreciate any help with
    > this matter.

  • I have a new phone and when asked do iwant to start this as a new phone or do a back up from my last back up. i chose the last back up option and it has taken all my recent photos texts and call off and replaced them with ones frow about 18 months ago.

    I have a new phone and when asked do i want to start this phone as a new phone or back up from last backup, i chose to back up from last back up and have had my recent photos texts and call replaced with ones from about 18 months ago. is there any way of undoing this?

    Welcome to the Support Communities. This Apple doc may be of interest:
    Channel Member Code of Conduct
    Kings74 wrote:
    They told my friend that the phone was not available in Black, that was the 5, and that the 5s was only available in silver and gold..
    A minor point, but it may avoid a little confusion if, instead of saying "black" in reference to the iPhone 5s, say "space gray":
    "iPhone 5s — Available in silver, gold, and space gray" (Source)

  • Re: Beginner needs help using a array of class objects, and quick

    Dear Cynthiaw,
    I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.
    I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ? In html, I assume. How did you generate the html code of your three classes ? By help of your IDE ? NetBeans ? References ?
    I already posted my question with six source code classes ... in text mode --> Awful : See "Polymorphism did you say ?"
    Is there a way to discard and replace a post (with html source code) in the Sun forum ?
    Thanks for your help.
    Chavada

    chavada wrote:
    Dear Cynthiaw,
    I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.You think she's still around almost a year later?
    I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ?Just use [code] and [/code] around it, or use the CODE button
    [code]
    public class Foo() {
      * This is the bar method
      public void bar() {
        // do stuff
    }[/code]

  • Need help using 1440x1080 footage in a SD 4:3 timeline

    Hi Folks,
    I need to use some AVCHD footage in a normal SD 4:3 timeline destined for a dvd. I'm trying to figure out the best workflow. The client provided a usb hard drive with some files extracted from a Sony hdr-sr5. I know the first problem is ingesting these files. I'm on a PPC G5 so I know using the L&T window isn't an option. I have experimented with using Toast to convert the files to ProRes 422 and that seems to work to some degree. I'm probably not doing it correctly because the footage shows up in FCP looking somewhat squished down and with letterbox bars above and below. In Toast the files indicate that they are h.264 1440x1080. When viewing in the Toast Video Player they get 'expanded' to 1920x1080. So I'm not sure why the footage gets letterboxed when converted to ProRes. So I guess that's the first part of the problem.
    The second issue is that I just need to use the center crop of the image in a SD timeline. It's just talking head stuff so there's no problem cropping down. But I'm just not sure I understand the correct procedure for doing that once I have the footage ingested in the proper format.
    I could definitely use some guidance here as the whole AVCHD thing is new to me.
    Thanks,
    Chris

    Can't help with your first question, but create an sd 4:3 timeline. Drop your hd footage into it. It will come in letterboxed. In the motion tab, remove any distortion, scale and position to your liking

  • Hi there Hope someone can help me here. I am currently on holidays and my Kids have disabled my iPad so I now have to sync with my computer. I don't have my computer handy and want to use my device over the next few weeks if possible so can anyone help me

    Hi there
    Hope someone can help me here. I am currently on holidays and my
    Kids have disabled my iPad so I now have to sync with my computer.
    I don't have my computer handy and want to use my device over the next few weeks
    if possible so can anyone help me please
    Thanks
    Darren
    iPad 2 Wi-Fi + 3G, iOS 6.0.2

    You need a computer.
    Suggest you goto the nearest Apple Reseller and ask them to help you.

  • I have just upgraded to OS X Mavericks. It wanted me to upgrade my 20000 photos before the New iphoto could use them. I did. 43.6GB of photos became 1.8GB of very small photos of arounf 178KB instead of 2.5MB. Can't do anything with them. Help?

    I have just upgraded to OS X Mavericks. It wanted me to upgrade my 20000 photos before the New iphoto could use them. I did. 43.6GB of photos became 1.8GB of very small photos of arounf 178KB instead of 2.5MB. Can't do anything with them. Help?

    The obvious and simple solution is to restore from the back up you made before upgrading.
    Other than that you'll need to give us a lot more detail. Mavericks doesn't ask you to upgrade your Photos, upgrading to a later iPhoto asks you about upgrading the Library. Where is the library? What version were you upgrading from? Anything else you can tell us that might help understand the problem you're having.

  • I need helping using iAds in my application.

    I need helping using iAds in my application. I currently am not using any storyboards. I am using Sprite builder for my UI.
    I attatched an image ot show all the different file name I have.
    Everyone is being used & they all work fully.
    The "iAdViewController.h & .m" files are just example codes I looked up and was messing with so that my iAd can work.

    I wouldn't even be able to use the Mathscript node in an executable? 
    What I am trying to do is make a user configurable data stream. 
    They tell me how many bytes are in the stream and what parameters they
    want to be put in to it.  Currently I have to make vi's that are
    called dynamicaly to make the parameters.   Then recompile
    the code and send it to them.  This is somewhat of how the config
    file is set up so I know how to make the data.
    Data_Type  foo
    Bytes 30
    parameter_name        
    function           
       byte#          format
    sync              
    foo_sync            
    29               int
    time                              
    foo_time             
    1,2,3,4       double
    If I can't use MathScript to allow the user to make there own functions
    is there another way that I might be able to do this so I do not have
    to recompile the code atleast?  Were I might just be able to make
    the new function and send that to them.
    Any Idea would be great.

Maybe you are looking for

  • Not able to get Proforma Billing list in VF04

    Hi I am trying to get Billing list for proforma invoice in  VF04 I have done follwoing setitng In VOV7, item category "Billing Relevance"-have been "A" In  VTFL, maitnianed item category for the combination of delivery document type and proforma docu

  • Importing text file (delimited, fixed width) with MDM Import Manager?

    Hello all, According to the overview section of the import manager reference guide, it is possible to import from delimited text files (e.g. CSV). But when it comes to the details, text files are not mentioned anymore. I also found no option in the I

  • Using EBS search strings to allocate a customer profit center

    Hi All, I am using IHC for my incoming payments. I use substitution for profit centers in customer orders, I would like the EBS to automatically deposit into the customer's account using the same profit center used when creating the customer orders.

  • Format Date to MM/DD/YYYY as date not char

    How do I format a Date to MM/DD/YYYY but keep the data type as a date?

  • BSET-HWBAS Tax Base Amount is wrong / double

    Dear Experts, We have a scenario where in IDOC comes from External system to SAP for posting. We are using BAPI_ACC_DOCUMENT_POST for doing the postings. I have nearly passed all the necessary parameters but still the Tax base amount in BSET is wrong