Need help with format and reinstall of leopard

hey guys. I am having major problems with my MacBook. I have been using it for over a year with no problems, however last night it crashed big time. Data loss isnt an issue, as I did a full backup the night before. I need to know if it possible to format the hard drive through the terminal. I have been trying to do so with no luck as the drive continually gives me the error "resource busy." it does this in terminal, single-user mode and disk utility off of the DVD. I am pretty savvy with all but the most complicated terminal work. How do you check running processes and end them through the terminal? I think if I can fix that, I might be able to format the drive. Its havng b tree and leaf errors through fsck. It may need to be replaced. Let me know what is this best way to format the drive and get it back to a blank slate through the terminal and fix the resource busy problems.

If you boot the "offending" Mac as a FW target disk, there should be no permissions issues on that drive. Permissions are controlled by the OS which will not be loaded when the computer is booted into target disk mode. If the target disk is connected to a running Mac, you should be able to treat the drive just like any other external FW drive. At that point, you should be able to delete any existing partitions on the drive, create (a) new one(s) and "zero out" the drive. There is an "Ignore permissions on this drive" option that should be selected. I can't imagine any logical reason that you could not reformat the drive in this manner.

Similar Messages

This is a second try to get help. I need help to uninstall and reinstall Photoshop cc 2014

Bridge is not working well, I need to reinstall Photoshop cc 2014 . Someone from Communities was suppose to help me.

Hi John,
I used the chat "Creative chat support" this afternoon at around 14:40
and the person, Karthik M , gave me a link to Technical Support. I
guess he could not help me, but he said he understood the issue.   With
the link "Help, Adobe Installation problems",   I will follow the
instructions to clean ps cc2014 with CCleaner and reinstall the app.
It looks quite complicated but I will give it a try and hopefully succeed.
You have to understand when reading my previous messages, the issue is
no longer "Retreiving Photoshop CC" but reinstalling Phoshop 2014 to try
to repair Bridge.
Thanks for caring,
Suzanne Lanthier
Le 2014-08-13 15:50, John T Smith a écrit :
>
      This is a second try to get help. I need help to uninstall and
      reinstall Photoshop cc 2014
created by John T Smith <https://forums.adobe.com/people/JohnTSmith>
in /Adobe Creative Cloud/ - View the full discussion
<https://forums.adobe.com/message/6637788#6637788>

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Help with downloading and reinstalling

Will someone please help me download and reinstall Adobe Photoshop Elements 7? I have a new computer and have lost a ton of photos which are supposed to be in Adobe Revel.

if you don't have your installation media/files and use windows and if you follow all 7 steps, you can dl a trial via one of the links on this page: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml/comment-page-1#comment-2174
and activate with your serial number.
if you have a dl problem, you didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem.

Need help with backup and clean install

Need Assistance with G5
Background
I'm an inexperienced Mac user with a G5, twin 2.0 gig processors and 1.5
gig ram. The OS is v10.3.6. It is the latest OS that will not slow down
internet (Safari/Mail) applications. Anything newer has really slowed internet applications down big time.
Current Problem
I've probably messed up my hard drive by switching back and forth
(archive/install) from newer to present OS. I now have corrupted data and
while my Mac is useable, several things do not work (disk utility, printing
and possibly more). I have a mixture of new and older versions of
these applications/utilities in my OS.
Going Forward
I believe I need to wipe out my hard drive and do a clean install. I also have a Mac mini which I can use (I believe) for backup via firewire.
Backup
Is everything I need to backup in the "User" folder? My spouse and I have
separate accounts and a shared account on the same Mac, with a total of 8.5 gig of data, mostly photo's and music. We want to save that and the usual preferences and favorites/bookmarks/addresses/email, etc. It would be nice if all I had to do was drag the user folder into the target drive.
I'd appreciate any assistance. I have more questions which I'll get to later, but I need to start somewhere.
Thanks all
Mac G5

Backing up your Users folder will save everything in all the accounts on the computer including pictures, music, preferences, etc. as long as they were kept in that folder.
If you have File Vault turned on you should turn it off. The "correct" procedure for transferring to your Mac Mini is as follows:
1. Turn both computers off. Connect them together with a Firewire cable.
2. Boot the G5 into Target Disk Mode.
3. Then boot the Mac Mini normally. The G5's hard drive should be present on the Mini's Desktop.
4. Create a new folder on the Mini and name it something appropriate like G5 User Backup. Drag the Users folder on the G5 into this new folder on the Mini.
After the transfer completes you should verify that everything has been transferred and is there in the folder.
5. Drag the G5's hard drive icon from the Desktop to the Trash or CTRL-click on its icon and select Eject from the contextual menu.
6. Shutdown the G5 and remove the Firewire cable connecting the two computers.
You can now proceed to fix the G5. Because you are planning to erase the hard drive I would like to suggest you do an extended format to prep the hard drive properly for your restoration:
1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
You can then quit Disk Utility and return to the installer. Now proceed to reinstall OS X. Be sure you set up your accounts with the exact same usernames and passwords as you used before.
Once you have completed your reinstallation on the G5 you can restore your Users folder from the Mac Mini.
1. Shut down both computers. Connect them with a Firewire cable.
2. Boot the G5 into Target Disk Mode.
3. Boot the Mac Mini normally. G5's hard drive should appear on the Mini's Desktop.
4. Open a Finder window on the G5's hard drive and drag the Users folder to the Trash (don't delete yet.)
5. Now copy the saved Users folder from the Mac Mini to the G5 (only the Users folder, not the folder in which you stored it.)
6. Eject the G5's hard drive from the Mini's Desktop and shut down the G5.
7. Disconnect the Firewire cable.
Now restart the G5. If all worked well it should start up normally and you should find everything normal in your accounts.
There is one potential problem in all the above. All your account preferences are contained in the Users folder. If you have any corrupted preferences, they will still be corrupted and may continue to cause problems. If that's the case you may need to trash the /Home/Library/Preferences/ folder's contents. Hopefully, this won't be the case, but you should be aware of the possibility.
If eveything is working normally you can empty the Trash and delete the contents. Same on the Mac Mini.

Need Help with Format/Partition.. using cmd

Okay guys.. Im kinda sick of trying to get my Recovery to work. Seems like its about to finish and everything is perfect.. then suddenly I get an error message saying that Recovery didnt work, or something like that..
I figured I might as well try starting with a fresh hard drive, then trying the recovery again..
So someone told me that if I have the HP Recovery disks, then I would be able to try them, even on a brand new hard drive, or a formatted one or whatever..
Is this true?
If so, then what I am asking you guys, is, if there is anybody that would be able to help guide me thru the steps needed, in order for me to Format my hard drive, & then partition it or whatever…
& I wanna be able to do all this, using cmd (command prompt)
So Please.. anyone.. your help would be greatly appreciated..
I have an HP Pavilion dv6653cl
Thanks!!

Hi,
There's no need to pre-format a new Hard Drive - if you perform a 'Factory Reset' using your Recovery Discs, these will perform a quick format and also re-create all the original partitions on the new drive as part of the process.
A complete guide to using Recovery Discs can be found on the relevant link below.
Performing An HP System Recovery - Windows 7.
Performing An HP System Recovery - Windows Vista.
Performing An HP System Recovery - Windows XP.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

New user needs help with full windows reinstall/itunes

ok
my first time on here so be gentle,
ok heres my problem, be using itunes for a whilenow with my nano, never had any problems, always just got my mp3's, then just clcked "add folder" in itunes, and then pointed to the said album, and in it goes.
now my problem is, iam about to do a full reinstall of my win xp, however, 1. i have no idea how to back up my music with itunes., and 2., my actuall musc tracks are all over the hard drive.
so any help....
i will add here my idea as to how what think i must do......
...i was going to track down all my mp3's on my hard drive, (about 3 gigs worth), and then just copy them over to my .."my music.itunes", folder, and then when i have reinstalled my pc, just copy that back to the "my music" folder....will this work.
and if it does what will i have to make sure i do on the new install of my itunes, to get my playlists back as they are now....
i want to avoid thehorror stories i have read were after such reinstalls soon as there ipod plugged in again the blank new itunes updates ipod to blank....(how do i avoid this), and how do i get my new clean itunes to be like it was/is now....
lots of questons i know, but pretty desprate to get on with my reisntall...
thaks in advance for ay help.
toz
pc Windows XP Pro

toz,
We love seeing pro-active thinking here at the Discussions! You're off to a great start!
And you've pretty well got the right idea of what has to be done. A few points to make things go a bit smoother, though.
..i was going to track down all my mp3's on my hard drive, (about 3 gigs worth), and then just copy them over to my .."my music.itunes", folder, and then when i have reinstalled my pc, just copy that back to the "my music" folder....will this work.
It probably would work but fortunately there's an easier method. Use the iTunes Advanced menu > Consolidate Library... command and iTunes will automatically find all the songs in your music library that are not currently in the iTunes Music folder, make copies of them and then put them into that folder (along with any songs that are already there).
With that out of the way, there are two main ways to make the back-up copies of your library. The one this article in the Apple Knowledge Base describes in detail is burning CD's/DVD's. That will take care of the music itself but if, as you say, you want to keep your playlists (and the information they depend on) intact, you will also have to make back-up copies of the iTunes Library files . That link tells you where to find them.
The other approach to creating your back-up is to use any spare hard drive you happen to have available and simply copy the iTunes folder (which happens to contain the iTunes Music folder and the iTunes Library files). Some of our Discussions regulars are quite fond of this method .
Once you've made your decision and successfully backed up your Library, restoring the music in iTunes onto your newly-formatted hard drive will be fairly straightforward but it will depend on which method you select. So post back and let us know how you're going to proceed as well as any other questions you may have.

Need help with INSERT and WITH clause

I wrote sql statement which correctly work, but how i use this statment with INSERT query? NEED HELP. when i wrote insert i see error "ORA 32034: unsupported use of with clause"
with t1 as(
select a.budat,a.monat as period,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
c.wrbtr,
c.matnr,
c.menge,
a.monat,
c.zuonr
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='D'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,t2 as(
select a.BUKRS,a.BELNR, a.GJAHR,t1.vtweg,t1.budat,t1.monat from t1, ldw_v1.bkpf a
where t1.zuonr=a.xblnr and a.blart='WL' and bukrs='8431'
,tcogs as (
select t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
sum(bseg.wrbtr) as COGS,bseg.matnr,bseg.kunnr,sum(bseg.menge) as QUANTITY
from t2, ldw_v1.bseg
where t2.bukrs=bseg.bukrs and t2.belnr=bseg.BELNR and t2.gjahr=bseg.gjahr and BSEG.KOART='S'
group by t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
bseg.matnr,bseg.kunnr
,t3 as
select a.budat,a.monat,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
case when c.shkzg='S' then c.wrbtr*(-1)
else c.wrbtr end as NTS,
c.matnr,c.kunnr,
c.menge*(-1) as Quantity
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='S'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,trevenue as (
select t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,
sum(t3.NTS) as NTS,t3.matnr,t3.kunnr,sum(t3.QUANTITY) as QUANTITY
from t3
group by t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,t3.matnr,t3.kunnr
select NVL(tr.budat,tc.budat) as budat,
NVL(tr.monat,tc.monat) as monat,
NVL(tr.vtweg,tc.vtweg) as vtweg,
NVL(tr.gjahr, tc.gjahr) as gjahr,
tr.hkont as NTS_hkont,
tc.hkont as COGS_hkont,
NVL(tr.prctr,tc.prctr) as prctr,
NVL(tr.MATNR, tc.MATNR) as matnr,
NVL(tr.kunnr, tc.kunnr) as kunnr,
NVL(tr.Quantity, tc.Quantity) as Quantity,
tr.NTS as NTS,
tc.COGS as COGS
from trevenue TR full outer join tcogs TC
on TR.BUDAT=TC.BUDAT and TR.MONAT=TC.MONAT and TR.GJAHR=TC.GJAHR
and TR.MATNR=TC.MATNR and TR.KUNNR=TC.KUNNR and TR.QUANTITY=TC.QUANTITY
and TR.VTWEG=TC.VTWEG and TR.PRCTR=TC.PRCTR
Edited by: user13566113 on 25.03.2011 5:26

Without seeing what you tried it is hard to say what you did wrong, but this is how it would work
SQL> create table t ( n number );
Table created.
SQL> insert into t
2 with test_data as
3    (select 1 x from dual union all
4     select 2 x from dual union all
5     select 3 x from dual union all
6     select 4 x from dual)
7 select x from test_data;
4 rows created.
SQL>

Exchange 2010 install corrupted, need help to remove and reinstall

Completed a fresh install of Exchange 2010 on Windows Server 2008 R2, the install went without any issues, however when opening either the EMC or EMS there is no access, continue to get the following errors in the event log.
Application Log:
Log Name:      Application
Source:        Microsoft-Windows-IIS-W3SVC-WP
Date:          5/21/2014 8:54:34 AM
Event ID:      2280
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      TFServer4.TFSNET.local
Description:
The Module DLL D:\Exchange2010\Bin\kerbauth.dll failed to load. The data is the error.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
    <EventID Qualifiers="49152">2280</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-05-21T12:54:34.000000000Z" />
    <EventRecordID>8904</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>TFServer4.TFSNET.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="ModuleDll">D:\Exchange2010\Bin\kerbauth.dll</Data>
    <Binary>7E000000</Binary>
</EventData>
</Event>
I have attempted to reregister the dll and also to replace it however it did not solve the issue, the instance of Exchange can not find the server and or the database on startup. I have attempted to uninstall all the Exchange rolls and have been able to
remove all but the mailbox and Management Tools, when I do I receive this:
Summary: 3 item(s). 2 succeeded, 1 failed.
Elapsed time: 00:00:11
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Mailbox Role Prerequisites
Failed
Error:
Uninstall cannot continue. Database 'Mailbox Database 1047019462': This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, or arbitration mailboxes. To get a list of all mailboxes in this database, run the command Get-Mailbox
-Database <Database ID>. To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of archive mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Archive. To get a list of all
arbitration mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Arbitration. To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID>. To disable
an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -Archive. Arbitration mailboxes should be moved to another server; to do this, run the command New-MoveRequest <parameters>. If this is the
last server in the organization, run the command Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox. Mailbox plans should be moved to another server; to do this, run the command Set-MailboxPlan
<MailboxPlan ID> -Database <Database ID>.
Click here for help...
http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=4a96fd69-9cec-4a48-9571-5c9e8ab3cfe9
Elapsed Time: 00:00:00
Organization Prerequisites
Completed
Elapsed Time: 00:00:01
Since I do not have access to EMS and can not perform any of the necessary requirements to remove the mailbox role and uninstall all of exchange and attempt a reinstall.
Any help with this would be most appreciated.

Thank you for the reply, I have checked the applicationHost.config as indicated, and the path shown is the same as in the error message, there is no D:\Exchange,Server\V14\Bin\ path, it is as indicated in the error D:\Exchange2010\Bin\. Here is the section
from that applicationHost.config file:
<add name="CertificateMappingAuthenticationModule" image="%windir%\System32\inetsrv\authcert.dll" />
            <add name="UrlAuthorizationModule" image="%windir%\System32\inetsrv\urlauthz.dll" />
            <add name="DigestAuthenticationModule" image="%windir%\System32\inetsrv\authmd5.dll" />
            <add name="IISCertificateMappingAuthenticationModule" image="%windir%\System32\inetsrv\authmap.dll" />
            <add name="IpRestrictionModule" image="%windir%\System32\inetsrv\iprestr.dll" />
            <add name="kerbauth" image="D:\Exchange2010\Bin\kerbauth.dll" />
As indicated in my post, I have replaced the kerbauth.dll from another functioning exchange 2010 installation and it has not corrected the issue.
At this point I am looking for a solution for removing the mailbox role and being able to complete the uninstall of exchange and perform a clean install.
Any additional help with this is very much appreciated.

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Need help with mac and java

Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine.
I'm having a herrendous time trying to get quicktime to work on it.
I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that requires 1.4+
Now 1.4.1 doesnt work with quicktime
I've downloaded the latest software upgrades but Ive got no idea how to set up quicktime to work with java 1.4.1
Now to add on top of that mac reports it can use AES encryption. this is from source code ripped striaght from this website.
But first and foremost can anyone, annyonee help me out with setting up 1.4.1 with quicktime?
Thank you

If you need encryption with Java 1.3.1, download the JCE from either Sun (http://java.sun.com/products/jce/) or Bouncy Castle (http://www.bouncycastle.org/).
Cheers,
--Arnout

Need help uninstalling photoshop and reinstalling

need help uninstalling and reinstalling photoshop

And why do you think you need to reinstall? What is happening?

I need help with CC and Lr

I've been using Lr4 for quite a while and have bought a new camera. Lr4 doesn't support the camera so I downloaded the "trail" version of Lr5.4. When opening the program it gives me an option to try or buy. Well after trying I wanted to buy. I clicked on the link and it sent me to the Adobe page. There I was sent further into the site to purchase the program. When I got there a chat window popped open and I started a dialog with someone about my purchasing options. I could buy the full version for $149 or join the CC for $9.99 a month. After careful consideration I chose the CC. It took a while to figure out how to navigate through it, but have finally got a handle on it. The issue now is it tells me that my Lr is up to date, but when I open the program it still asks me to try or buy??? It asks if I have a serial number as if I purchased it and when I go on to the add a serial number I don't actually have one so I'm forced to "try" to open the program.
What do I do now to run the program without being prompted to try or buy???
Thanks

Sign in, activation, or connection errors | CC, CS6, CS5.5
You may also simply need to run the cleaner tool and reinstall it from inside the CC app.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Need help with format and reinstall of leopard

Similar Messages

Maybe you are looking for