Need help with Hierarchical Select List

I'm trying to left-pad the entries in a select list to indicate organizational hierarchy. Here's the query:
SELECT
LPAD(' ',2*(LEVEL-1)) || ORG_NM d,
ORG_ID r
FROM
ORG_ENTITIES
START WITH ORG_ID = 901
CONNECT BY PRIOR ORG_ID = MNG_ORG_ID
ORDER BY 2;
(there are two spaces between the single quotes)
It seems to work fine from a standard SQL prompt, but it looks as if either Apex or the browser is stripping off the spaces in the padding. Can someone point out a reason? I'm using Application Express 3.0.0.00.20. Thanks.

I've used the concatenation of two items to create space between them before, and that works fine. This is an LPAD situation, however, as there is only one item.
I did try the & nbsp; in place of the literal space character. The select list strips out the & and I get some variation of the literal characters. I even tried using periods in place of spaces for the padding and that didn't work either.
Don't know what is going on.

Similar Messages

I need help with a SELECT query - help!

Hello, I need help with a select statement.
I have a table with 2 fields as shown below
Name | Type
John | 1
John | 2
John | 3
Paul | 1
Paul | 2
Paul | 3
Mark | 1
Mark | 2
I need a query that returns everything where the name has type 1 or 2 but not type 3. So in the example above the qery should bring back all the "Mark" records.
Thanks,
Ian

Or, if the types are sequential from 1 upwards you could simply do:-
SQL> create table t as
2 select 'John' as name, 1 as type from dual union
3 select 'John',2 from dual union
4 select 'John',3 from dual union
5 select 'Paul',1 from dual union
6 select 'Paul',2 from dual union
7 select 'Paul',3 from dual union
8 select 'Paul',4 from dual union
9 select 'Mark',1 from dual union
10 select 'Mark',2 from dual;
Table created.
SQL> select name
2 from t
3 group by name
4 having count(*) <= 2;
NAME
Mark
SQL>Or another alternative if they aren't sequential:
SQL> ed
Wrote file afiedt.buf
1 select name from (
2    select name, max(type) t
3    from t
4    group by name
5    )
6* where t < 3
SQL> /
NAME
Mark
SQL>Message was edited by:
blushadow

I need help with circular linked list

Hi,
I need help with my code. when I run it I only get the 3 showing and this is what Im supposed to ouput
-> 9 -> 3 -> 7
empty false
9
empty false
3
-> 7
empty false
Can someone take a look at it and tell me what I'm doing wrong. I could nto figure it out.
Thanks.This is my code
/ A circular linked list class with a dummy tail
public class CLL{
     CLLNode tail;
     public CLL( ){
          tail = new CLLNode(0,null); // node to be dummy tail
          tail.next = tail;
     public String toString( ){
     // fill this in. It should print in a format like
     // -> 3 -> 5 -> 7
if(tail==null)return "( )";
CLLNode temp = tail.next;
String retval = "-> ";
     for(int i = 0; i < -999; i++)
do{
retval = (retval + temp.toString() + " ");
temp = temp.next;
}while(temp!=tail.next);
retval+= "";}
return retval;
     public boolean isEmpty( ){
     // fill in here
     if(tail.next == null)
          return true;
     else{
     return false;
     // insert Token tok at end of list. Old dummy becomes last real node
     // and new dummy created
     public void addAtTail(int num){
     // fill in here
     if (tail == null)
               tail.data = num;
          else
               CLLNode n = new CLLNode(num, null);
               n.next = tail.next;
               tail.next = n;
               tail = n;
     public void addAtHead(int num){
     // fill in here
     if(tail == null)
          CLLNode l = new CLLNode(num, null);
          l.next = tail;
          tail =l;
     if(tail!=null)
          CLLNode l = new CLLNode(num, null);
          tail.next = l;
          l.next = tail;
          tail = l;
     public int removeHead( ){
     // fill in here
     int num;
     if(tail.next!= null)
          tail = tail.next.next;
          //removeHead(tail.next);
          tail.next.next = tail.next;
     return tail.next.data;
     public static void main(String args[ ]){
          CLL cll = new CLL ( );
          cll.addAtTail(9);
          cll.addAtTail(3);
          cll.addAtTail(7);
          System.out.println(cll);
          System.out.println("empty " + cll.isEmpty( ));
          System.out.println(cll.removeHead( ));
          System.out.println("empty " + cll.isEmpty( ));
          System.out.println(cll.removeHead( ));
          System.out.println(cll);
          System.out.println("empty " + cll.isEmpty( ));
class CLLNode{
     int data;
     CLLNode next;
     public CLLNode(int dta, CLLNode nxt){
          data = dta;
          next = nxt;
}

I'm not going thru all the code to just "fix it for you". But I do see one glaringly obvious mistake:
for(int i = 0; i < -999; i++)That says:
1) Initialize i to 0
2) while i is less than -999, do something
Since it is initially 0, it will never enter that loop body.

Need help with drop down list in parameters

Hi All,
I have the following data set:
DEPT1     DEPT2     DEPT3 DEPT4
Commissioner's Office     Finance     Accounting     Accounts Payable
Commissioner's Office     Finance     Accounting     Fiscal Analysis & Repo
Commissioner's Office     Finance     Accounting
Commissioner's Office     Planning,Asset Mgt     Asset Management     Inventory & Tracking
Commissioner's Office     Planning,Asset Mgt     Asset Management     Mobility & Congestion
Commissioner's Office     Planning,Asset Mgt     Asset Management     Roadway Safety
Commissioner's Office     Planning,Asset Mgt     Asset Management
Commissioner's Office     DesignProj Mgt & Tec     Bridge Dsgn Insp Hyd
In plus i have four parameters with searchlight options, the problem is when i select "Finance" from DEPT2 and in the next selection level i'm seeing all the departments "Accounting,Asset Management and Bridge Dsgn Insp Hyd" insted of just "Accounting". What i want is if i select a department in DEPT2, in the next drop down list(DEPT3) i want to see only the departement corresponding to the one i selected in dept2. Please need help.
Thanks

Hi
First of all you need to be using Discoverer 10g or 11g Plus not 9.0.4. Assuming you have the right version you need to present the parameters in the correct order. You can change the order on the parameters screen by selecting Tools | Parameters from the toolbar. You then use the Move Up and Move Down buttons to place them in the right order so that DEPT1 is offered first, followed by DEPT2, then DEPT3 and then DEPT4.
Next, you need to check the radion button on the bottom of the right-hand side that allows linking of parameters then you make DEPT2 dependent upon DEPT1, with DEPT3 dependent upon DEPT2 and so on.
While this works without hierarchies it works best when you have a hierarchy in place and even better when there is a composite index on the 4 items.
Best wishes
Michael

Help with Cascading Select List in Tabular Form

Hello Friends,
I am trying to implement Denes Kubicek's sample for Cascading Select list and ran into this error:
Please help me identify what I might have missed ???
<code>
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource 'http://apex.oracle.com/pls/apex/f?p=12...
<select><option value="0">- Select Employee (0) -</option></select><html lang="en-us" xmlns:htmld...
</code>
Please find below the list of activities I performed:
1.Created the region source
2.Created the hidden items
3.Created the buttons and items
4.Created the application process for MRU and Delete
5.Created the Application item [ TAB_CASCADING_ITEM]
6.Created the Application Process[tab_casc_sel_list]
Any clue/pointers to debug this are welcome.
I tried the above on apex.oracle.com; WS: CHAITANYAPATCHIPULUSU; USERNAME :[email protected]
PWD:Satya123 in APPLICATION : 12855 and Page :35
Regards..

OK, you didn't have the background process as an on demand process.
In the MRU and MRD process, you were referencing the wrong variables for the count. (as in deb's case, it's p176, but in your case its p35).
In the javascript function, the call that is supposed to assign : TAB_CASCADING_ITEM a value, isn't working (I believe).

Need help with db select

As usual I have been stuck for a while on what is probably a very simple solution so perhaps someone can help me, thanks.
I have a portfolio page to which I post a url to filter the portfolio type (0, 1 or 2) and display the results.
It works ok except that I can't get the url right to show all records. I have tried things like
/portfolio.php?websitetype=1&2
and
/portfolio.php?websitetype=*
/portfolio.php?websitetype>0
Perhaps I need to change my select?
$query_portfolio = "SELECT * FROM portfoliodb WHERE portfoliodb.websitetype='". $_GET['websitetype'] ."' AND portfoliodb.visible = 1 ORDER BY portfoliodb.portfolio_id DESC";

bikeman01 wrote:
Ok I've now got it working as suggested so that's a big improvement, thanks but it's not quite what I was after. What I want is for all records to be retrieved by default when there is no url suffix and not require ?websitetype=ALL
That is not what your OP asked for!
It works ok except that I can't get the url right to show all records. I have tried things like
/portfolio.php?websitetype=1&2
and
/portfolio.php?websitetype=*
/portfolio.php?websitetype>0
// determine if the URL parameter for websitetype is set.
if (isset($_GET['websitetype'])) {
               // run a query to filter only selected types
               // based off value of URL parameter
                    $query_portfolio = "SELECT *
                    FROM portfoliodb
                    WHERE portfoliodb.websitetype='". $_GET['websitetype'] ."'
                    AND portfoliodb.visible = 1
                    ORDER BY portfoliodb.portfolio_id DESC";
// else if the URL parameter for websitetype is not set.
} else {
                    // run query to display ALL types
                    $query_portfolio = "SELECT *
                    FROM portfoliodb
                    ORDER BY portfoliodb.portfolio_id DESC";
// end condition if the URL parameter for websitetype is set.

I need help with drop down lists

I have a form that does not have lots of space and I want to use drop down lists to fill in specific information that describes site conditions. The problem I have is that the drop down list is only set up for a single line and that is not enough space for what I want in the drop down list. In other words, I have items that are several sentences. I have seen some descriptions of creating a drop down list that then fills in a text box that has multiple lines. Unfortunately, that is not an ideal solution for me. I just want the drop down list to select a single phrase. Here is an example of what I want to be able to select in the drop down.
The water heater spilled flue gases in excess of 5 minutes under worst case conditions. The combusiton testing was completed with in 30 days of the invoice submittal.
The form does not allow me to create a field that goes all the way across the page so it needs to look something like this:
The water heater spilled flue gases in excess of 5 minutes
under worst case conditions. The combusiton testing was
completed with in 30 days of the invoice submittal.
Any help is greatly appriciated.

Thanks for responding.
I have three items that are very similar in length and text for each drop down. There are 9 drop downs right now. I am using the drop downs to fill in a form that is used by several people and I want to keep things as simple as possible. Associated with the drop down already is a check box. When the check box is checked, it fills in a text box with a score (1 point, 5 points, etc). That score then tallys for a total with all the other scores in another text box. Using a drop box to fill in a text box is just getting to busy and than I have to distinguish each drop down item so it is clear which text you are selecting.

Need Help With A Select Staement

This is my data set.
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08
I'm need totals for those that are opened and closed per day. Here is what I'm trying to achieve...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
Open 0 03-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
Open 0 05-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
Close 0 09-JAN-08
This select statement gets me close but the problem is how to get the ones that should have a Value of 0
select 'Open' "Status", count(*) "Value", to_char(open_date, 'DD-MON-YY') "DATE"
from usar_log2
where open_date IS NOT NULL and
to_char(open_date, 'MON-YY') = to_char(sysdate, 'MON-YY')
and (USAR_status like 'CLOSED' or usar_status like 'OPENED' or USAR_Status like 'WORKING')
group by to_char(open_date, 'DD-MON-YY')
UNION
select 'Closed' "status", count(*) "Close", to_char(close_date, 'DD-MON-YY')
from usar_log2
where close_date is not null and
to_char(close_date, 'MON-YY') = to_char(sysdate, 'MON-YY')
and (USAR_status like 'CLOSED' or usar_status like 'OPENED' or USAR_Status like 'WORKING')
group by to_char(close_date, 'DD-MON-YY')
order by 3, 1 desc;
The above select statement's results...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
But I need this instead...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
<----- Open 0 03-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
<----- Open 0 05-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
<----- Close 0 09-JAN-08
Any help would be more appreciative.

Thank you...You all are great. While I'm still
looking at the various ways you all provided, from
what I have looked at so far, they don't address
05-JAN-08 which has a null open date. There are
three possiblities, maybe four. Does 05-JAN-08 have a null open date in the data you supplied?
You showed us:
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08
which looks like they all have open dates.
Perhaps, if there was null open dates you should have used [code][/code] or [pre][/pre] tags around your data so it looked something like
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
          05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08And then it would have required the ANSI outer join in my query to allow for outer joining on more than one column...
SQL> ed
Wrote file afiedt.buf
1 WITH t as (SELECT to_date('02-JAN-2008','DD-MON-YYYY') as open_date, to_date('02-JAN-2008','DD-MON-YYYY') as closed_date from dual union all
2             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('02-JAN-2008','DD-MON-YYYY') from dual union all
3             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('02-JAN-2008','DD-MON-YYYY') from dual union all
4             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('03-JAN-2008','DD-MON-YYYY') from dual union all
5             SELECT to_date('04-JAN-2008','DD-MON-YYYY'), to_date('04-JAN-2008','DD-MON-YYYY') from dual union all
6             SELECT NULL, to_date('05-JAN-2008','DD-MON-YYYY') from dual union all
7             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), NULL from dual union all
8             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), to_date('07-JAN-2008','DD-MON-YYYY') from dual union all
9             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), to_date('07-JAN-2008','DD-MON-YYYY') from dual union all
10             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), to_date('08-JAN-2008','DD-MON-YYYY') from dual union all
11             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), NULL from dual union all
12             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), NULL from dual union all
13             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), NULL from dual union all
14             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), NULL from dual union all
15             SELECT to_date('09-JAN-2008','DD-MON-YYYY'), NULL from dual)
16      ,all_dates as (select minod+rownum-1 as dt
17                     from   dual, (select min(open_date) minod, max(open_date) maxod from t)
18                     connect by rownum <= maxod-minod+1)
19      ,stat as (select 'open' as status from dual union all select 'closed' from dual)
20 -- END OF DATA
21 select all_dates.dt, stat.status, sum(decode(decode(stat.status, 'open', t.open_date, t.closed_date), all_dates.dt, 1, 0)) as cnt
22 from   stat JOIN all_dates ON (1=1)
23         LEFT OUTER JOIN t ON (NVL(t.open_date, NVL(t.closed_date, all_dates.dt)) = all_dates.dt)
24 group by all_dates.dt, stat.status
25* order by 1,2 desc
SQL> /
DT        STATUS        CNT
02-JAN-08 open            6
02-JAN-08 closed          3
03-JAN-08 open            0
03-JAN-08 closed          0
04-JAN-08 open            1
04-JAN-08 closed          1
05-JAN-08 open            0
05-JAN-08 closed          1
06-JAN-08 open            0
06-JAN-08 closed          0
07-JAN-08 open            3
07-JAN-08 closed          2
08-JAN-08 open            3
08-JAN-08 closed          1
09-JAN-08 open            1
09-JAN-08 closed          0
16 rows selected.
SQL>Make your requirements clear in the future.

Need help with Advanced Selection in MSA

Hi,
Has anyone managed to identify how to create additional
advanced selection criteria using links to existing combo engines ? Documentation on Mobile system maint is limited so looking for some additional help. Some criteria you can run the check against but not all why ? What should go in the hierachy fields and how do you select the choice list values ?
Thanks in advance
M

Hi,
Thanks,my issue is I want to use the combo box so the user can select from the drop down the relevant code from the choice list. Not rocket science really.
Example of sql generated for profession whch is kna1 field.
select KNA1.TITLE,KNA1.SFAKNA2,KNA1.SFAKNA1,KNA1.PROFRESSION as PROFESSION,KNA1.PAFKT,KNA1.NAME2,KNA1.NAME1,KNA1.KVTGRP,KNA1.KVCPPOS,KNA1.KUNNR,KNA1.KTOKD,KNA1.BPACT,KNA1.ANRED,KNA1.ABTNR,ADRC.TELNR_LONG,ADRC.STREET,ADRC.POST_CODE1,ADRC.CITY1,ADRC.ADRCDFLT,ADDR.SFAKNBP , (KNA1.PROFESSION ='MIC') as ReturnValue1 from SMOKNA1 KNA1,SMOADRC ADRC,CDBD_ADDREXT ADDR where kna1.deleted='0' and KNA1.Source='CON' and ADRC.deleted='0' and ADDR.deleted = '0' and (ADRC.ADRCDFLT='S' or ADRC.ADRCDFLT='P') and (1=1) and kna1.sfakna1=adrc.sfakna1 and adrc.sfaadrc = addr.sfaadrc order by kna1.name1
Code fails !
I have set VAR1 as a free Combo with Bdoc as Choice, segment as Choice List with fields chkey/Textx so hiearchy fields looks like this //*/Profession hiearchy params being mandt/spras/list
It will not check is this because there is an error in this definition ?
Regards
MM

Need help with cursor selection in control panels

I can't get my cursor to work in the control panel at the top of the screen, for example, when I select text and want to change the font size, etc. It won't even select to change from font to paragraph mode. Other issues are trying to choose the selection tool, which I can only do with the "V" shortcut tool--escape doesn't work, nor does the cursor choose the icons. Help!

Windows? see InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

[8i] Need help with hierarchical (connect by) query

First, I'm working in 8i.
My problem is, I keep getting the error ORA-01437: cannot have join with CONNECT BY.
And, the reason I get that error is because one of the criteria I need to use to prune some branches with is in another table... Is there anyway to work around this? I tried an in-line view (but got the same error). I thought about using the connect by query as an in-line view and filtering off what I don't want that way, but I'm not sure how to filter out an entire branch...
Here is some simplified sample data:
CREATE TABLE     bom_test
(     parent          CHAR(25)
,     component     CHAR(25)
,     qty_per          NUMBER(9,5)
INSERT INTO     bom_test
VALUES     ('ABC-1','101-34',10);
INSERT INTO     bom_test
VALUES     ('ABC-1','A-109-347',2);
INSERT INTO     bom_test
VALUES     ('ABC-1','ABC-100G',1);
INSERT INTO     bom_test
VALUES     ('ABC-1','1A247G01',2);
INSERT INTO     bom_test
VALUES     ('ABC-100G','70052',18);
INSERT INTO     bom_test
VALUES     ('ABC-100G','M9532-278',5);
INSERT INTO     bom_test
VALUES     ('1A247G01','X525-101',2);
INSERT INTO     bom_test
VALUES     ('1A247G01','1062-324',2);
INSERT INTO     bom_test
VALUES     ('X525-101','R245-9010',2);
CREATE TABLE     part_test
(     part_nbr     CHAR(25)
,     part_type     CHAR(1)
INSERT INTO     part_test
VALUES     ('ABC-1','M');
INSERT INTO     part_test
VALUES     ('101-34','P');
INSERT INTO     part_test
VALUES     ('A-109-347','P');
INSERT INTO     part_test
VALUES     ('ABC-100G','M');
INSERT INTO     part_test
VALUES     ('1A247G01','P');
INSERT INTO     part_test
VALUES     ('70052','P');
INSERT INTO     part_test
VALUES     ('M9532-278','P');
INSERT INTO     part_test
VALUES     ('X525-101','M');
INSERT INTO     part_test
VALUES     ('1062-324','P');
INSERT INTO     part_test
VALUES     ('R245-9010','P');This is the basic query (with no pruning of branches):
SELECT     LEVEL
,     b.component
,     b.parent
,     b.qty_per
FROM     bom_test b
START WITH          b.parent     = 'ABC-1'
CONNECT BY PRIOR     b.component     = b.parentThe query above gives the results:
      LEVEL COMPONENT                 PARENT                        QTY_PER
      1.000 101-34                    ABC-1                          10.000
      1.000 A-109-347                 ABC-1                           2.000
      1.000 ABC-100G                  ABC-1                           1.000
      2.000 70052                     ABC-100G                       18.000
      2.000 M9532-278                 ABC-100G                        5.000
      1.000 1A247G01                  ABC-1                           2.000
      2.000 X525-101                  1A247G01                        2.000
      3.000 R245-9010                 X525-101                        2.000
      2.000 1062-324                  1A247G01                        2.000
9 rows selected....but I only want the branches (children, grandchildren, etc.) of part type 'M'.
e.g.:
      LEVEL COMPONENT                 PARENT                        QTY_PER
      1.000 101-34                    ABC-1                          10.000
      1.000 A-109-347                 ABC-1                           2.000
      1.000 ABC-100G                  ABC-1                           1.000
      2.000 70052                     ABC-100G                       18.000
      2.000 M9532-278                 ABC-100G                        5.000
      1.000 1A247G01                  ABC-1                           2.000Any suggestions?

Hi,
user11033437 wrote:
First, I'm working in 8i.
My problem is, I keep getting the error ORA-01437: cannot have join with CONNECT BY.
And, the reason I get that error is because one of the criteria I need to use to prune some branches with is in another table... Is there anyway to work around this? I tried an in-line view (but got the same error). Post your query. It's very hard to tell what you're doing wrong if we don't know what you're doing.
...but I only want the branches (children, grandchildren, etc.) of part type 'M'.
e.g.:
LEVEL COMPONENT                 PARENT                        QTY_PER
1.000 101-34                    ABC-1                          10.000
1.000 A-109-347                 ABC-1                           2.000
1.000 ABC-100G                  ABC-1                           1.000
2.000 70052                     ABC-100G                       18.000
2.000 M9532-278                 ABC-100G                        5.000
1.000 1A247G01                  ABC-1                           2.000
You mean you want don't want the descendants (children, grandchildren, etc.) of any component whose part_type is not 'M'.
The part_type of the component itself doesn't matter: component '101-34' is included, even though its part_type is 'P', and component 'X525-101' is excluded, even though its part_type is 'M'.
>
Any suggestions?Sorry, I don't have an Oracle 8.1 database at hand now. All three of the queries below get the correct results in Oracle 10.2, and I don't believe they do anything that isn't allowed in 8.1.
You can't do a join and CONNECT BY in the same query on Oracle 8.1.
I believe you can do one first, then the other, using in-line views. The frist two queries do the join first.
--     Query 1: Join First
SELECT     LEVEL
,     component
,     parent
,     qty_per
FROM     (     -- Begin in-line view to join bom_test and part_test
          SELECT     b.component
          ,     b.parent
          ,     b.qty_per
          ,     p.part_type     AS parent_type
          FROM     bom_test     b
          ,     part_test     p
          WHERE     p.part_nbr     = b.parent
     )     -- End in-line view to join bom_test and part_test
START WITH     parent     = 'ABC-1'
CONNECT BY     parent          = PRIOR component
     AND     parent_type     = 'M'
;Query 2 is very much like Query 1, but it does more filtering in the sub-query, returning only rows hose part_type or whose parent's part_type is 'M". Your desired result set will be a tree taken entirely from this set. Query 2 may be faster, because the sub-query is more selective, but then again, it may be slower because it has to do an extra join.
{code}
-- Query 2: Join first, prune in sub-query
SELECT     LEVEL
,     component
,     parent
,     qty_per
FROM     (     -- Begin in-line view to join bom_test and part_test
          SELECT     b.component
          ,     b.parent
          ,     b.qty_per
          ,     p.part_type     AS parent_type
          FROM     bom_test     b
          ,     part_test     p
          ,     part_test     c
          WHERE     p.part_nbr     = b.parent
          AND     c.part_nbr     = b.component
          AND     'M'          IN (c.part_type, p.part_type)
     )     -- End in-line view to join bom_test and part_test
START WITH     parent     = 'ABC-1'
CONNECT BY     parent          = PRIOR component
     AND     parent_type     = 'M'
{code}
Query 3, below, takes a completely different approach. It does the CONNECT BY query first, then does a join to see what the parent's part_type is. We can easily cut out all the nodes whose parent's part_type is not 'M', but that will leave components like 'R245-9010' whose parent has part_type 'M', but should be excluded because its parent is excluded. To get the correct results, we can do another CONNECT BY query, using the same START WITH and CONNECT BY conditions, but this time only looking at the pruhed results of the first CONNECT BY query.
{code}
--     Query 3: CONNECT BY, Prune, CONNECT BY again
SELECT     LEVEL
,     component
,     parent
,     qty_per
FROM     (     -- Begin in-line view of 'M' parts in hierarchy
          SELECT     h.component
          ,     h.parent
          ,     h.qty_per
          FROM     (     -- Begin in-line view h, hierarchy from bom_test
                    SELECT     component
                    ,     parent
                    ,     qty_per
                    FROM     bom_test
                    START WITH     parent     = 'ABC-1'
                    CONNECT BY     parent     = PRIOR component
               ) h     -- End in-line view h, hierarchy from bom_test
          ,     part_test     p
          WHERE     p.part_nbr     = h.parent
          AND     p.part_type     = 'M'
     )     -- End in-line view of 'M' parts in hierarchy
START WITH     parent     = 'ABC-1'
CONNECT BY     parent     = PRIOR component
{code}
I suspect that Query 3 will be slower than the others, but if the CONNECT BY query is extremely selective, it may be better.
It would be interesting to see your findings using the full tables. Please post your observations and the explain plan output.
As usual, your message is a model of completeness and clarity:
<ul>
<li>good sample data,
<li> posted in a way people can use it,
<li>clear results,
<li> good explanation
<li> nciely formatted code
</ul>
Keep up the good work!

Need Help with hierarchies in BI

Hi BI Gurus,
i got a question for u all there..
i am novice in BI and i am using a time dependent hierarchy in my query..
1) i want to display only one node of the hierarchy in the report.
   say for ex.. i am using 0orgunit which has three nodes and
   subsequent leaves in it. i want to display only one particular
   node.
2) one node in my query is not being displayed in Bex. its putting that particular nodes leaves in unassigned nodes.
can you guys please help me out with the answers
thanks in advance
point will b awarded for the helful answers.
regards
Mazhar

Mazhar,
Maintain the hierarchy for the object and in the Hierarchy display properties of that info object you can maintain the levels.
If the values are appearing in Unassigned then you need to check out the hierarchy definition once. Please check out that and revert back if you have the same issue repeats.
Hope this helps...
Regards
Gattu

Need help with a SELECT statement

Dear forumers,
I'm a newbie in ABAP and I'm trying to figure out what the following line means (in bold letters):-
SELECT SINGLE STAT2 FROM PA0000 INTO PA0000-STAT2
WHERE PERNR = ITAB_DATA-STAFF_NO.
Does this mean that the single data from the STAT2 field is selected and then placed back into the same field (doesn't quite makes sense, right)?
Please help and many thanks in advance!

SELECT SINGLE STAT2 FROM PA0000 INTO PA0000-STAT2
WHERE PERNR = ITAB_DATA-STAFF_NO.
Does this mean that the single data from the STAT2 field is selected and then placed back into the same field (doesn't quite makes sense, right)?
it sense very much right.
have you heared about table buffer concept?
here this concept exactly comes.
try with this below code:
TABLES:pa0000."tables must be decleare
SELECT SINGLE STAT2 FROM PA0000 INTO PA0000-STAT2.
write:PA0000-STAT2.
and since you are using select single than you should be use much key as much possible for getting accurate data.other wise system will pick first data which match your where condition.
Amit.

Need help with special select case

Oracle DB 12c, I think 12.1.2
drop table person_tests;
create table person_tests (
person_id number,
test_type_id varchar2(1),
test_date date
insert into person_tests (person_id,test_type_id,test_date) values (1,'A',to_date('01012000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (1,'A',to_date('01022000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (1,'B',to_date('01032000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (1,'B',to_date('01042000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (1,'C',to_date('01052000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (2,'C',to_date('01062000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'A',to_date('01072001','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'A',to_date('01082000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'B',to_date('01092000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'B',to_date('01102000','MMDDYYYY'));
insert into person_tests (person_id,test_type_id,test_date) values (3,'C',to_date('01102000','MMDDYYYY'));
Persons as participating in certain tests: A, B and C where each test is tagged with a date when done.
I need to output only people that completed 2 tests of type A, 2 tests of type B and 1 test of type C. I have to display the test type and the date of the most recent of those tests. In the example above, desired output would be
1 C            05-JAN-00
3 A            07-JAN-01
Hope this problem definition makes sense

Hi,
Sorry, I missed the requirement about showing the most recent test_type_id.
Assuming the date to be shown is the date the minimum requirements were fulfilled (whether of not gratutitous tests came afterwrds), you can do something like this:
WITH    got_r_num    AS
    SELECT person_id, test_type_id, test_date
    ,       ROW_NUMBER () OVER ( PARTITION BY person_id, test_type_id
                                 ORDER BY      test_date
                               )   AS r_num
    FROM    person_tests
    WHERE   test_type_id IN ('A', 'B', 'C')
SELECT    person_id
,         MIN (test_type_id) KEEP (DENSE_RANK LAST ORDER BY test_date) AS last_test_type
,         MAX (test_date)                                                AS last_test_date
FROM      got_r_num
WHERE     r_num <= CASE test_type_id
                        WHEN 'A' THEN 2
                        WHEN 'B' THEN 2
                        WHEN 'C' THEN 1
                    END
GROUP BY person_id
HAVING    COUNT (*) = 5 -- 2 'A's + 2 'B's + 1 'C'
What test_type_id would you want to display in case of a tie for the latest test?
I just saw your post saying that a person with 3 or more type 'A' tests should be excluded. In that case, my original solution (with = in the main WHERE clause) is what you want; only used LAST to get the latest test_type_id. The solution in this message is for the situation where you don't care if someone had 3 or more 'A's, but you want to ignore all but the first 2.

Need Help with hijacked contact lists

Hello all, I am new here, so please forgive me if I'm posting to the wrong board...didn't really see anything more appropriate. I have a problem with a hijacked contact list:
I have three email accounts being forwarded to my BB Curve 8530. Two from Yahoo and one from AOL. In each of these accounts (when accessed directly from yahoo.com or aol.com) have different contacts. Not all of these contacts are in my BB contact list. The other day, one of my yahoo accounts was somehow hacked, and resulted in one of those spam "drugs for sale" emails being sent to people in my contact list. Well, when I investigated, I discovered that actually, someone who is not even in that particular accounts contact list, but another account. How is this possible?
If that is confusing, here's a better summary (using fake email addresses):
[email protected] sent a bogus email message to [email protected]
but, [email protected] is not in [email protected]'s address book. it is in [email protected] [email protected] is not listed in my BB device's contact list.
The only thing I can think os is somehow the BB was hacked, and someone was able to go through all linked contact lists, and send an email across all connected accounts.
How was this able to happen? what can I do to stop it?
thanks!
Lee

This is the Welcome and Introductions section, so Greetings, and welcome!
The 8500 model section would be perfect for your questions,so we'll get it move there.
Meanwhile,
leevalon wrote:
The only thing I can think os is somehow the BB was hacked, and someone was able to go through all linked contact lists, and send an email across all connected accounts.
Sorry, not possible... UNLESS you gave your BlackBerry to someone to use for a while, during which time they spammed all your contacts. Did you?
Do you have a Security password set on the device? If you are afraid of the above happening, setting the password will just that impossible.
But it wasn't hacked.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need help with Hierarchical Select List

Similar Messages

Maybe you are looking for