Need Shell Script for picking the files
Hi,
I want to write a shell script for piking the files in a sequence order (according to filename with time stamp) from the sorce FTP server ..
Requirement is in the source directory I'm getting files (Jain_1.xml , Jjain_2.xml, Jain_3.xml .. ect..) at present my file adapter is picking all the files at a time but i want to pick one by one... that to first i want to Jain_1.xml after finish the processing of the file then only my file adapter should pick the next file ( Jain_2.xml ) .
so.. all the forum mates suggest me to write a shell script.. but where i have to write the s hell script. and where i have to deploy this script.... my Xi is running on UNIX ... so please sugest me the procedure ...
Regards
Jain
Hi,
Why dont you use the option EOIO in which files will be picked up in order and will be proccessed in sequence....one after another....
Regards,
Sreeni.
Similar Messages
-
Need shell Script for Invalid object
Hi All,
Can anyone post me a script for checking the invalid objects in 10g/11g database.
The should should check for invalid objects,recompile and sent the email .I could think fo something like below(And applicable to multiple SID's running on the server) and i tested it it works(bash shell script)
Assumptions:
You have environmental file to set ORACLE_HOME ORACLE_SID
say in this example
/oracle/env
ls -ltr
env_ORCL.sh
env_TEST.sh
env_HR.sh
You also have uuencode rpm installed to use along with mailx command(or else get it installed not big deal). uuencode is required
to send as mail attachment
1)I have kept SID list in file (/oracle/INVALID directory for eg)
cat SID.lst
ORCL
TEST
HR
If you have lot of SID's you can populate the file using ( ps -ef|grep -i pmon | grep -v grep | awk '{print$9}' | sed 's/ora_pmon_//g' > SID.lst)
2) Here are the list of SQL's(/oracle/INVALID directory
cat invalid_pre.sql (For listing invalid objects per instance)
set echo off
set heading off
set time off
set timing off
spool invalid.log append
break on instance_name
select instance_name , a.*
from (select owner,count(*) from dba_objects where status='INVALID' group by owner) a, v$instance;
spool off
exit;
cat invalid_compile.sql--to recompile invalid objects
set echo off
set termout off
set feedback off
@?/rdbms/admin/utlrp.sql 4; (Note you change degree 4 or 8 accordingly)
exit;
cat invalid_post.sql--to list post recompilation
set echo off
set heading off
set time off
set timing off
spool invalid_post.log append
break on instance_name
select instance_name , a.*
from (select owner,count(*) from dba_objects where status='INVALID' group by owner) a, v$instance;
spool off
exit;
3)here is the shell script
cat invalid.sh
for i in `cat SID11g.lst`
do
cd /oracle/env/
source env_$i.sh
cd /oracle/INVALID
sqlplus "/as sysdba" @invalid_pre.sql
sqlplus "/as sysdba" @invalid_compile.sql
sqlplus "/as sysdba" @invalid_post.sql
done
uuencode invalid.log invalid.log | mailx -s "Invalid" <your mail id>
uuencode invalid_post.log invalid_post.log | mailx -s "Invalid" <your mail id>
4) Finally run the shell script, hopefully you should receive email :-)
I have tested it on bash
./invalid.sh
Once tested you can schedule it in cron
Edited by: vreddy on Jul 19, 2012 9:57 AM -
Help on preparing shell script for setting the listener password
Hi All,
I am working on checking all my DB servers listeners and if the password is not set for the listener then I need to set the password for that.
As we have many servers, I am planning to prepare the shell script for doing this task.
I am familiar with setting up the listener password manually, but strucked up to prepare the shell script to do the same task.
Can any one kindly help me on this.
Thanks in advance,
Mahi815537 wrote:
Could any body please help me.
Thanks,
MahiPatience, Grasshopper
This forum is not a chat line, and it is not paid support.
No one is responsible for monitoring it and giving a quick response.
Furthermore, it is a global forum. The person with the information you seek may very well live 20 time zones away from you and was going to bed just as you posted. He will not even see your post for several more hours.
Your original post went up in the middle of the night for half the world.
No one with the information you seek is deliberately withholding it until you sound sufficiently desperate. -
Need VB script for getting the IIS certification information
Hi guys,
I have totally 1000 IIS servers 2003 & 2008
windows and some of the servers configured
IIS 3rd party Security certificates. I need a script to get the certification information like expiry date & certificate vendor name.
Regards,
SreeMPost here:http://forums.iis.net/
Look in Gallery for IIS scripts:http://gallery.technet.microsoft.com/
¯\_(ツ)_/¯ -
Script for transfer the file from windows to UNIX machine
Hi expert
1. I neeed one script that will transfer the files from windows machine to UNIX machine.
2. And the data updated in Windows file should also be update in UNIX file.
3. Please send me the steps how can i schedule this script.
Thanks in advance
Regards
FrndIt depends on what you need.
It's possible to use:
-winscp
But that means using a program to drag and drop files. This is most commonly used.
-setup samba on the unix system (the samba package/software needs to available for your unix)
This requires some setup on the unix system, and your windows system (connect the unix system and put a share defined on the unix system to a driveletter on your windows system), but lets you easily make a batchfile which copies data from one windows drive to another. A batchfile can be scheduled using 'at'. -
Power Shell Script for getting the list of members of a particular collection group
Hi Group
I am looking for a powershell script for the below manual process in sccm2012. please help
Obtain the list of “All Users Group1” collection that have been defined as a Primary User of a device, and what that Users ShortName and Device name is
Obtain the list of user from Active Directory that have their “Title” attribute equal to “Non-Employee” (samAccountName)
For each user that is returned from AD, determine if they are assigned as a Primary User of a Device and write the Device name to a file
Continue to append all of the applicable Device names to the file
End Result = List of all Devices that have Users that have their AD Attribute “Title” equal to “Non-Employee”
thanks
VARHi,
The Cmdlets below should be helpful for you to write the script. You could have a look.
Get-CMUser
Get-CMUserDeviceAffinity
Get-ADUser
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Need a script to delete user files and run on logout.
Hi folks!
I'm a total Mac novice so forgive me if I'm vague on anything here. I work in a library and we have recently acquired an iMac running Mountain Lion. The unit is primarily for use by Visually Impaired users however sighted folks can use it as well.
What I need is something that will delete any files created/downloaded by the sighted users but that will not delete anyone else's files. I tried just using the Guest Account however that also deletes all the system preferences for that account including the dock setup which I need to stay the same.
If possible I would like this to run on logout.
For additional points anyone who can also find me something that will run automatically when the users sign in and will sign them out after 30 minutes would super spectacularly awesome.
Thanks people!That being said, if you you still really want to do this you can create a logout hook and write a shell script to remove the files. See "About Daemons and Services", Appendix B on writing a logout hook.
But a far easier way is to create Account's login item that will cause a shell script to be launched to delete the files. You can encapsulate the shell script so it runs as an application that can be added to the Login Items. One such encapsulator is Platypus.
Note, rather than delete them, if you want to ensure all the specific plists have specific settings, then create a master set of them and copy the master set into the Preferences directory (being careful to observe ownership and permissions settings of course). -
Shell scripting for sftp command
Guy's
you may wondering how i can ask these question in this forum,actually it's related to abap,we have create
unix script that will upload file from remote sftp server
and put it into AL11 transcation (take any location from
your point of view),but instead of using shell script
that is having ftp the want to go for sftp,for your undersatnding following thing's i am working with
<b>Tcode</b>:sm69,sm49
<b>function module</b>:SXPG_COMMAND_EXECUTE
script that need to have sftp instead of ftp
Connecting to ftp server to get the file on the current server
SOURCE_FILE_NAME=TSPAR_`date +%Y%m%d`.txt
TARGET_FILE_NAME=TSPAR_`date +%Y%m%d`.txt
cd /interf/torrance/TCW/FI
ftp -nv << EOF
open 10.252.8.73
user sanju sanju
cd /home/sanju
get $SOURCE_FILE_NAME
EOF
cp SOURCE_FILE_NAME TARGET_FILE_NAME
rm SOURCE_FILE_NAME
<b>note:</b>above script is working ,but we want' sftp not ftp
don't try above script as such,because value's are
changed for sake of securityTry to execute same command using your OS .
ksh + x ( is for debugging ) shell script and see where its failing . I also did the same thing in last project as i have written 5 different shell scripts , for backup , append file , sending file to FTP location and then create email ...
Hope thisll help you
Thanks -
Creating shell script for cloning
Hi,
I am cloning 11.5.8 instance. For copying of files from source to production I use rcp command. I want to create shell script that copies the files and lwhen it is complete send an email to my rediffmail account.
There are 2 problems:-
1. How to track if rcp commaind has completed.
2. How to send out an email. I tried to send an email using sendmail but it gave me an error "stdin: Value too large for defined data type".
Please help.
Thanks & Regards,
NeerajHi Neeraj,
I'd suggest using the exit code from the rcp command to drive your email step. For most commands in Linux, and exit code of 0 indicates success, and in most shells, the environment variable $? stores the exit code of the most recent command. So, you could do something like this:
rcp source_files target_location
if [[ $? -eq 0 ]]
then
echo "Huzzah\!" | mailx -s "RCP from source to target successful" your_username@your_host
else
echo "Bummer. Got exit code $? from rcp" | mailx -s "RCP from source to target failed" your_username@your_host
fiThe preceding advice is offered with three disclaimers:
1) I don't know which shell you're using (ksh, bash, csh?) -- my code snippet assumes ksh, but the principles should be the same in any shell
2) My morning coffee has not yet taken effect, so I may be completely wrong about something important :-)
3) The code above is untested, and will probably not work in any shell without modification.
Despite all that, hopefully this will put you on the right track.
Regards,
John P.
Message was edited by:
jpiwowar (minor clarification) -
Need Help in creating Unix Shell Script for database
Would be appreciable if some one can help in creating unix shell script for the Oracle DB 10,11g.
Here is the condition which i want to implement.
1. Create shell script to create the database with 10GB TB SPACE and 3 groups of redo log file(Each 300MB).
2. Increase size of redolog file.
3. Load sample schema.
4. dump the schema.
5. Create empty db (Script should check if db already exists and drop it in this case).
6. Create backup using rman.
7. restore backup which you have backed up.This isn't much of a "code-sharing" site but a "knowledge-sharing" site. Code posted me may be from a questioner who has a problem / issue / error with his code. But we don't generally see people writing entire scripts as responses to such questions as yours. There may be other sites where you can get coding done "for free".
What you could do is to write some of the code and test it and, if and when it fails / errors, post it for members to make suggestions.
But the expectation here is for you to write your own code.
Hemant K Chitale -
I need a script that copies the filename into the file
I need a script that copies the filename into 4th column of each line in the text doc file.
I have over 2000 different file names each containing 6 columns and ~50-100 rows.
I can do this manually using this script:
awk '{print $1"\t"$2"t\"$3"\t <name> \t"$6}'
But I would like an automation command or script. Is there any command that I can use instead of <name> that will copy the filename into the column?
Thanks
MonicaOops, I forgot the redirect to a file. It's not a good idea to edit files in place. A script could fail and you're left with at least one file ruined. It's better to create new files then delete the old files.
for file in *; do
while read col1 col2 col3 col4 col5 col6; do
printf "%s\t%s\t%s\t%s\t%s\n" $col1 $col2 $col3 $file $col6
done < $file > n$file
done
You could narrow the files listed such as
for file in *.tsv
and redirect the new files to another directory. Such as
done < $file > /absolute/path/to/directory/$file -
I need to create an action or script to save the file with the name of the selected layer
I need to create an action or script to save the file with the name of the selected layer (not including the hidden layers, but including those visible).
How could modify the script: 'Layer Comps To Files.jsx' to get the result?
Warning: I do not need to export all layers as files.
Who can help me?
THX in advanceVersione in Italiano (Further down the English version)
NB - Nella versione inglese ho messo tutte le immagini dei menu in italiano.
Versione per Mac, ma credo sia identico per Windows.
Spiego passo passo cosa ho fatto:
- Ho creato un file esempio con tre Livelli, salvato sulla scrivania e ho chiuso il file.
- Ho aperto il file e selezionato il Livello al centro per iniziare a registrare una azione che ho chiamato: Save with Name of Selected Layer
- Nuova azione
- Dare il nome e premere Registra
Ora salva…
- Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Ancora una volta Menu --> Livello... --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Menu --> Livello --> Ordina --> Dietro
- Menu --> Livello --> Unisci sotto
- Menu --> Livello --> Unisci visibili
- Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Menu --> Livello - Nascondi Livello
- Menu --> Elimina --> Elimina livelli nascosti (press -Yes-)
- Menu --> Livello --> Nuovo --> Livello... Inserisci questo: 'Move this to the trash' e premi ok
- Menu --> File --> Script --> Esporta Livelli in File... (Nella finestra che si apre scegliere l’opzione che si desidera, ma togliere il prefisso del nome) e premere -Esegui-
- Selezionare il pannello Storia cliccare su Elimina premendo -Si- ogni volta che si apre la finestra di dialogo (Ripetere 8 volte questa operazione sino ad arrivare nella storia alla condizione di partenza. Ho visto che è meglio di Ripristina -F12-)
- Fermare la registrazione.
A questo punto, mandando in esecuzione questa Azione, ho raggiunto parzialmente l’obiettivo perché i file così creati mantengono, purtroppo, dei prefissi numerici per evitare probabilmente la sovrascrizione di file (credo senza avviso) nel posto dove vengono creati.
Per ottenere l’obiettivo occorre un nuovo passo ed a proposito di questo riferisco quanto segue:
ATTENZIONE - L’operazione descritta qui di seguito deve essere fatta su di una copia del file, per cui:
- Duplicare il file,
- Spostare l’originale in altra cartella
- Lavorare sul file duplicato.
mi riferisco a questo...
ATTENZIONE - Questa modifica è effettuata a proprio rischio e pericolo ed il sottoscritto non si assume alcuna responsabilità su quanto venga fatto soprattutto da mani inesperte.
ATTENZIONE - Questa modifica sovrascrive qualsiasi file che abbia nome uguale al layer che viene selezionato più l’estensione del file naturalmente.
Comunque la modifica è banalissima e a portata di chiunque.
Procedere così:
- Chiudere Photoshop
- Aprire (nel percorso specificato dall’immagine) il file “Export Layers to Files.jsx” (Export Layers To Files.jsx 1.0.0.16) con un editor di testo puro.
- cercare la stringa (dovrebbe essere in riga 1029)
var fileNameBody = fileNamePrefix;
fileNameBody += "_" + zeroSuppress(i, 4);
fileNameBody += "_" + layerName;
- sostituirla con:
var fileNameBody = fileNamePrefix;
fileNameBody += layerName;
- cercare la stringa (dovrebbe essere in riga 1047-46)
var fileNameBody = fileNamePrefix;
fileNameBody += "_" + zeroSuppress(i, 4) + "s";
- sostituirla con:
var fileNameBody = fileNamePrefix;
fileNameBody += "";
- salvare e uscire.
- riavviare Photoshop
- provare l’azione registrata facendo attenzione che il nome del layer non sia identico al nome di un file già presente altrimenti questo verrà sovrascritto.
Domanda:
Perché ho creato livelli che poi ho eliminato ecc.
Risposta:
Semplice per evitare errori di esecuzione delle azioni nel caso di operazioni con livelli mancanti o altro.
Semplice... no?
English version
Mac version, but I think it's the same for Windows.
First of all, I'm translating the actions that I made using the Italian version of Photoshop, you look at the position of the menu that I have chosen to do the work with other languages.
I explain step by step what I did:
- I created a sample file with three layers, saved to the desktop and I closed the file.
- I opened the file and select the layer at the center to start recording an action that I called: Save with Name of the Selected Layer
- New action
- Give the name and press Save ( I think it is so in English )
Now save ...
- Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Once again Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Menu -> Layer - > Arrange (order) -> Behind
- Menu -> Layer - > Merge Down
- Menu -> Layer - > Merge Visible
- Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Menu -> Layer - Hide Layer
- Menu - > Delete - > Delete hidden layers (press -Yes- )
- Menu -> Layer - > New —> Layer… Enter this: ' Move this to the trash ' and press ok
- Menu -> File - > Scripts -> Export Layers To Files... (In the window that opens select the option you want, but take away the name prefix) and press - Run -
- Select the History panel and click Delete (on menu opened) pressing -Yes- every time when open the dialog box (8 times Repeat this step until you get into the story to the starting condition. Not use Restore -F12-).
- Stop recording.
At this point, by executing this action, I have reached the goal partly because the files created in this way remain, unfortunately, the numerical prefixes to avoid possibly overwriting of files (I think without notice) in the place where they are created.
To achieve the goal we need a new step and thinking about this as follows:
WARNING - The operation described below should be made on a copy of the file, so :
- Duplicate the file
- Move the original folder to another
- Work on the duplicate file.
WARNING - This modification is performed at your own risk and the undersigned assumes no responsibility on what is done mostly by inexperienced hands.
WARNING - This change will overwrite any files with the same name as the selected layer plus the file extension of course.
However, the change is trivial and within reach of anyone.
Proceed as follows:
- Close Photoshop
- Open (in the specified path from the image ) file " Export Layers to Files.jsx " (Export Layers To Files.jsx 1.0.0.16) with a pure text editor.
- Search for the string (should be in line 1029 )
var = fileNameBody fileNamePrefix ;
fileNameBody = + "_" + zeroSuppress (i, 4 ) ;
fileNameBody + = "_ " + layerName ;
- Replace it with :
var = fileNameBody fileNamePrefix ;
fileNameBody + = layerName ;
- Search for the string (should be in line 1047-46 )
var = fileNameBody fileNamePrefix ;
fileNameBody + = "_ " + zeroSuppress (i, 4) + "s" ;
- Replace it with :
var = fileNameBody fileNamePrefix ;
fileNameBody + = "";
- Save and exit.
- Restart Photoshop
- Try the recorded Action, making sure that the layer name is not identical to the name of an existing file otherwise it will be overwritten.
Question:
Why I created levels which I then deleted etc..
Answer:
Simple to avoid errors of execution of the actions in the case of transactions with missing levels and other.
Simple ... is not it?
Sorry for my bad English...
Thanks in advance for any hint.
--->>> Please think about this... Adobe <<<--- -
Help needed in shell script for FTPS
Hi,
Im trying to build a script to download files from a secure FTP site.
When I run the command ftps <host_address> in the unix prompt, it asks username and password, and then prompts the following question.
Do you want to trust this certificate? y(y):
From the prompt, I am able to type 'y' and then it is connecting to the FTP site without any issue.
When i run the shell script which contains the same command ftps <host_address>, it prompts the same question. And then it comes out of the program saying 'Connection aborted'.
Could anyone tell me how to avoid this prompt?
Thanks,
VidhyaYa. It worked for me when i typed the command ftps <host_address> in the command prompt.
When I type this command, it is asking for username,pwd and after that, it is asking 'Do you want to trust this certificate?'. For this i have typed 'y' (Yes) in the command prompt.
After i entered 'y', the connection got established properly.
I have included this command in a shell script, and ran this script.
When i execute the script, i asks 'Do you want to trust this certificate?'.
Since i will not be able to type 'y'(Yes) connection is getting aborted.
So, I want to know how to avoid this question ot how to enter 'y' while executing the script.
Thanks -
Shell script for oracle alert.log file
Hi Gurus,
I wanted to write shell script to know the last 10 shutdown timings of the database from alert log file. I'm working on oracle 9i.
Could anyone please advice on this.
Thanks in advance
regards,
Shaan
Edited by: Shaan_dmp on Jan 5, 2009 1:27 PM
Edited by: Shaan_dmp on Jan 5, 2009 1:28 PMUse awk. I don't have a 9i to hand but here is a very simple version for 10g XE
My awk file (the line numbers are for the notes below - don't include them:
01:BEGIN { prevline = "";}
02:
03:/Completed: alter database close/ {print prevline,FS,$0;}
04:
05:{prevline = $0;}The command line and results (from my 300k alert log)
$ awk -f alert.awk.txt alert_xe.log
Fri Apr 11 18:08:40 2008 Completed: alter database close normal
Fri May 16 18:53:21 2008 Completed: alter database close normal
Tue May 20 17:28:23 2008 Completed: alter database close normal
Thu Jul 17 19:08:52 2008 Completed: alter database close normal
Fri Aug 15 15:12:48 2008 Completed: alter database close normal
Wed Nov 05 08:52:59 2008 Completed: alter database close normal
Fri Nov 14 16:36:03 2008 Completed: alter database close normal
Tue Dec 09 10:46:23 2008 Completed: alter database close normal
Mon Jan 05 11:12:22 2009 Completed: alter database close normalWhat it means:
1) the BEGIN section at line 01 defines the variable to hold the previous line
2) the /search string/ at line 03 finds the marker in the file for a shutdown, then does the required action (print the time which was in the previous line, and then this line; use FS (the awk field separator - normally space) as a separator
3) at line 05 is an instruction we do on every line - so we remember it in case it is the timestamp for the shutdown.
Now, you can include more of the corner cases for shutdowns by adding more search patterns etc. For more information, google for awk examples.
Awk is really good at this sort of thing!
HTH
Regards Nigel -
Shell Script for Startup and Shutdown the database
Hi,
i want Shell Script for Startup and Shutdown the database in Solaries.
could any one can hep me where i can get this script. or send to me to [email protected]
Thanks & Regards,
Gangi reddySHUTDOWN
SHUTDOWN ABORT]
Shuts down a currently running Oracle instance, optionally closing and dismounting a database.
Terms
Refer to the following list for a description of each term or clause:
ABORT
Proceeds with the fastest possible shutdown of the database without waiting for calls to complete or users to disconnect.
Uncommitted transactions are not rolled back. Client SQL statements currently being processed are terminated. All users currently connected to the database are implicitly disconnected and the next database startup will require instance recovery.
You must use this option if a background process terminates abnormally.
IMMEDIATE
Does not wait for current calls to complete or users to disconnect from the database.
Further connects are prohibited. The database is closed and dismounted. The instance is shutdown and no instance recovery is required on the next database startup.
NORMAL
NORMAL is the default option which waits for users to disconnect from the database.
Further connects are prohibited. The database is closed and dismounted. The instance is shutdown and no instance recovery is required on the next database startup.
TRANSACTIONAL [LOCAL]
Performs a planned shutdown of an instance while allowing active transactions to complete first. It prevents clients from losing work without requiring all users to log off.
No client can start a new transaction on this instance. Attempting to start a new transaction results in disconnection. After completion of all transactions, any client still connected to the instance is disconnected. Now the instance shuts down just as it would if a SHUTDOWN IMMEDIATE statement was submitted. The next startup of the database will not require any instance recovery procedures.
The LOCAL mode specifies a transactional shutdown on the local instance only, so that it only waits on local transactions to complete, not all transactions. This is useful, for example, for scheduled outage maintenance.
Usage
SHUTDOWN with no arguments is equivalent to SHUTDOWN NORMAL.
You must be connected to a database as SYSOPER, or SYSDBA. You cannot connect via a multi-threaded server. For more information about connecting to a database, see the CONNECT command earlier in this chapter.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a90842/ch13.htm#1013607
Joel Pérez
Maybe you are looking for
-
Since updating to 7.0.2 i am unable to tell if a song is stored on my phone or on itunes match. I have my phone set to display all music and to download over data. Previously songs that were stored in the cloud would display a cloud icon next to the
-
HT201402 What is the Content "other" category in the "about this mac" Storage information?
I have 250 Gig MacBook Pro. My Audio is 21G, Movie 33G Photo 13G, App 17G Backup 0G, Other 124G. What is the content of "Other"
-
Netui:select seems to be broken in Portal 9.2
Hi I have problems with the tag and I slowly think it might be a bug in the tag. The optionsDataSource attribute seems not to work anymore. It only puts the actual text '{pageFlow._options}' in the dropdown box. I tried to use it with the pageFlow an
-
Itunes version 5.0.1.4 used in the UK
I have downloaded this for my ipod but when i try to purchase music it shows as US money not UK. Can anyone shed some light please as I know the UK can purchase songs !!!!!!!!!
-
CS4 32bit & 64bit on Windows 7 ?
Hope this is the proper forum...looked around and this seems to be it ? I have CS4 Web Premium now running on a XP Pro 32 bit system...am in the process of upgrading to Win 7 Pro using 64 bit version ? 1) are both 32 bit and 64 bit versions of CS 4