Need solution for unicode error

Hi ,
I am facing unicode error "ESCAPE_TRICK cannot be converted to a character-type field" for
the following syntax -
ESCAPE_TRICK-X1 = '1C'.
Where ESCAPE_TRICK is defined as -
DATA: BEGIN OF ESCAPE_TRICK,
X1(1) TYPE X,
END OF ESCAPE_TRICK.
Please suggest me the solution.
Thanks,
Narayan

Hi,
As type X is obsolete.
you need to convert it to type c. But you should convert the hexadecimal value '1C' to its equivalent Char value. Replace your code with:
DATA: BEGIN OF ESCAPE_TRICK,
X1 TYPE STRING,
END OF ESCAPE_TRICK.
To convert Hex '1C' to type string
CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
EXPORTING
XSTRING = '1C'
IMPORTING
CSTRING = ESCAPE_TRICK-X1.
It should solve your purpose.
Alternatively, '1C' is "FILE SEPERATOR'. you can find its value in char and can use it.
howver, the first ,method should work..
revert back in case of further issue.
Thanks and Regards
Rishika
Edited by: Rishika Bawa on May 14, 2009 2:06 PM

Similar Messages

Need Solutions for these Errors

<b>Hello Group !
    How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:</b>
     1.SID missing.
     2.Idocs Missing or No Idocs arrived from source
        System.
     3.Errors in the source system
     4.Missing messages at transfer rules or
       Update rules.
     5.Data sent but not received.
     6.Errors in the source system.
    Have a nice week end
    Vijay

Hi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar

Solution for Unicode error MESSAGEG:Z

Hi all ,
I have a code
PERFORM write_report TABLES i_guideline
                            using 'Merit'
                                  'Guideline Amount' .
FORM write_report TABLES   p_i_mrth STRUCTURE i_mrth
                  using    p_title
                           p_title2.
After its unicode error check it is showing .
Error Code : *MESSAGEG:Z*
Error Msg : I_GUIDELINE" and the line type of "P_I_MRTH" are incompatible. With regard to alignment gaps, the line type of "P_I_MRTH" is not a real initial part of "I_GUIDELINE". .
Can anyone please give me any solution .
Thanks ,
Regards ,
Swashrayee

Hi,
In Unicode system type Incompatible error will appear when transferring the data from one structure to another strucrture which is not same alinged.
Might Be your one of the structure where filed's of i_guideline are like
a(4) type C ,
b(2) type C,
c     type I,
d     type N.
but another structure are I_MRTH
a (4) type c,
b Type I,
c Type C,
d type N.

Urgently need solution for Pricing Error: Mandatory condition type missing

Hello, All
I am working on CRM 5.0 service module and I am facing a problem while creating a service order.
When I enter the product in the service order it gives me an error
"pricing error: mandatory condition type Z### is missing" even though I maintained the customer pricing procedure, the pricing procedure determination, and the condition record. The error shows that the pricing procedure is determined as the error shows the mandatory condition is determined but what I think is that it cant find the condition record.
I already maintained the condition table and the condition record in the product master data but it does not pick the price, kindly help. Deserving points will be rewarded.
Regards
Jacopo François

Hi,
Open u r transaction which u r getting the error, Double click on product u ll get the item level info, Select condition there u click on create icon, there u can define the condition.
OR
While creating a sold to party check whether u r entered a sales area data properly or not.
Hope it helps u
Gentila

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Solution for iTunes error 0x80092013

Hello everybody!
You receive this error when you try to log in to your account iTunes or try to get access to iTunes Store.
I found a solution for this error.
Try these instructions, and if it helps, please write about it here. Thank you!
1. Disable updating Windows.
2. Open a command line as administrator.
3. Enter this command: "wusa.exe /uninstall /kb:2872339"
4. Restart your computer.
5. Open a command line as administrator again.
6. Enter this command: "wusa.exe /uninstall /kb:2882822"
7. Restart your computer.
And try to log in to your iTunes.
I hope it will help you!

Hi, chau.satish.
Thank you for visiting Apple Support Communities.
I understand that you are receiving error 11556 when attempting to connect to the iTunes Store. Here are the steps for this specific error that I would suggest going through.
"Error 11556"
This alert occurs when iTunes is trying to do something not allowed by the iTunes Store in that country.
The most common example of this is trying to sign in while limited to iTunes U by Parental Controls.
For more information, see the steps from iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store.
iTunes: Advanced iTunes Store troubleshooting
If the above steps do not resolve the issue, make sure that the iTunes Store is not disabled in Parental controls.
Use Parental Controls in iTunes to set content restrictions
-Jason H.

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport and TM, running Lion.

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport Utility and TM, running Lion.

See #C17 in Time Machine - Troubleshooting.

Any solution of Unicode error

Hi all,
I got an assingment to find the solution of unicode error message
MESSAGEG:Z
MESSAGEG?U
MESSAGEG!A
MESSAGEG59
MESSAGEG8C
MESSAGEGI0
MESSAGEGTY
MESSAGEGXD
PARAERS120
READ 023
SERR
ABB
OK
VIEW
I also find in google but i didnt find any suitable sol.
can any one help me to find a solution.
thanks
Swashrayee
Moderator Message: This is the third time you have posted the same assignment and getting it locked. Please the Rules of Engagement of these forums before further posting. This is your LAST warning. One more violation and your ID will be deleted.
Edited by: kishan P on Jan 16, 2012 12:26 PM

Hi
Could you please share exaclty error message received ?
Best regards

My solution for the "Error -50" and/or "Syncing" problem

Hi
After upgrading to iPhoto 5.0.2 I also had the "Error: -50" problem"
How have I solved this problem => also with the help and tips from other forums.
Before the upgrade all my pictures from iPhoto were available on my iPod Photo (30 GB)
After the upgrade of iPhoto to 5.0.2 I received the "Error: -50" every time I tried to synchronize my iPod. Strange, strange, strange, ...
=> first I detected that putting pictures on my iPod starting from a folder (in stead of iPhoto) worked fine.
Trying to change back to iPhoto did not work and no albums where available in the iPod Options view!
=> then I tried to create a new iPhoto library (press and hold Option(alt)-key while starting iPhoto), put some pictures and albums in it ... and even this did not work.
What did I do to solve this problem!
1. I thrashed my iPhoto application (DO NOT empty you trash, because you have to put it back again)
2. I used "Disk Utility" to repair the disk permissions.
3. I put back my iPhoto application from the thrash (same location as before - Applications folder)
4. and did again a "repair disk permissions"
5. then I tried to sync my NEW iPhoto library on my iPod and EUREKA this worked.
6. Then I switched back to my original iPhoto library (launch iPhoto holding the Option key).
7. Tried to sync ... again the same problem => no pictures and albums available in the iPod - Optoins - Photo tab.
=> conclusion : the problem has to be in my iPhoto library
8. after trying many things (such as eliminating albums => trail and error method) I found the cause for my problem.
=> I used KEYWORDS in my iPhoto library with strange characters and had SMART albums using it. In my situation it was the "&" character.
Replacing or removing this character solved my problem. All my pictures and albums were available in the iPod - Options - Photo tab
9. Sync could be started ... Youpi!
After synchronizing my iPhoto library I noticed that not all pictures were available on the iPod. I start looking which pictures that were missing on my iPod. When I found them I wanted to know why they were not synchronized.
I found the explanation in the file "AlbumData.xml" in the "iPhoto Library" folder.
If you open this file with TextEdit and search for this missing file then you'll find that (at least in my case) corresponding path does not exist (any more). And that was the case for each missing file!
How solving this problem?
1. I tried rebuilding the iPhoto Library => launch iPhoto holding the Option and Command keys. This did not work.
2. What did I do?
2.1. First I exported all my Pictures from the active iPhoto Library (Share - Export)
=> VERY IMPORTANT NOTE : all extra info such as "Key words", Albums, ... will NOT be saved!
2.2. I created a new iPhoto Library (launch iPhoto holding the Option key)
2.3. Then I imported all exported pictures.
=> if you check the file paths in the AlbumData.xml file, you'll see that this info is correct!
2.4. At least I recreated (manually) all "Key words", Albums, ... so I had a duplicate of my original Library.
I hope this also works for other people with the same problem.
Greetings
P@nt@ni

Here my solution for the itunes' "unknown error -50" and not showing any albums in the prefs' tab:
1. All rebuilding options in iphoto didn't resolve the problem.
2. I opened the file "AlbumData.xml" in the iPhoto-Library-Folder with a text editor. I figured out, that the problem wasn't in the Albums, but in the "Master Image List"-Section. They look like this:
<key>1741</key>
<dict>
.. titles, filenames, ....
</dict>
After making a backup of this file, I started deleting entries here (you know, the fastest way to do it is to split it always in halves and check in iTunes if the error still exists). After about half an hour I got the problem key.
3. The problem was: Some (curious) white spaces at the BEGINNING of the comment! Curious, because they weren't visible in iPhoto's comment, but I could delete them in Iphoto! I guess they weren't normal space characters, but any special symbols (line feeds? whatever)
4. After that, the -50 error was gone. Now I could see the Album Names. But the sync stopped after a while with a "... file not found...." - error.
5. Again, with trial&error I found out, that 4 pictures in the last 3 months' rolls made this second problem: I just duplicated them in iPhoto and deleted the original ones. So I still don't know why they have produced this error... anyway,
6. Now all of my photos sync well.
.. well, the whole story took me 2 evenings. I really didn't switched to Mac to play debugger for Apple. Do they read these groups here or do I better write them anywhere? They should get those problems fixed asap! As far as I read in the groups, those errors do exist quite a long time?!
My versions:
iPhoto 5.0.4 (263)
iTunes 5.0.1 (4)
OS X 10.3.9
iPod Nano 1.0

Need solutions for Budget, Landed cost and difference in 2005b and 2007B

Hi all,
Need help for the following scenarios
1. How to define budget for Purchase order and cost centers
2. Landed Cost in SAP B1 2007 how do we do? I am getting an error message stating that Landed cost allocation account is not defined....
3. Difference in 2005B and 2007B
Regards
Shashi

Thankyou Jasper,
Landed cost problem has been solved.
Regarding Budget set up My client need Budget at costcenter level. i.e Cost center wise they want the budget. As of my knowledge to do this we need to activate Account segmentation right?
Without doing that is there any other way where we can set Budget cost center level also?
one more thing, there is a check box of purchase order, Goods Receipt and Accounting at the time of setting up Budget in General setting? what it is for?
Regariding difference in 2005b and 2007B I was not able to get documentation on this.
Regards
Shashi

Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+

Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

Need solution for a Reporting Requirement

Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry       Invoice Number      Due Date      Amount
8111                   IV1                  13/04/2011 1000
8111                   IV2                  17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry    Week End date AR Amount due
8111     12/04/2010     0
8111     19/04/2010     1000
8111     26/04/2010     2000
8111     03/05/2010     2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
Vipul

Hi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards.

Solution for OPML error in SOA suite Startup (Win Vista x64 and older)

h1. Hi Folks!
When installing SOA suite on Vista 64 bit I encountered lots of problems. One of them was the following upon starting the SOA suite:
At 33% in the progress bar, the starter gives an error, returning a question about OPMN.
Caused by: oracle.ias.opmn.optic.OpticBadConnectException: Error connecting to OPMN (is it running?): Connection refused: connect
Being a newbie in this field, I resisted to learn everything (Oracle as part of a course of Busines Process Integration Laboratories at the University) about the works behind the package. Unfortunately, OPMN drove me crazy for days!
The main problem for OPMN is the unability for the system to handle certain issues.
One of the issues: When in a testing environment that is unstable (i.e. a laptop) some issues occur:
* sleep resume is not supported
* hibernation resume is not supported
* restart is not always working for all processes
(tested this with XP32 & XP64 SP2; SP 3; Vista 32 and Vista 64)
The main issue is with OPMN and the services that are started and controlled through it.
A solution for our workgroup has been made:
-create a reset.bat file
-use the following code:
+@echo off+
ECHO Step 1 in the server reset is running: Shutdown OPMN processes
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl shutdown
ECHO Please continue the reset sequence by pressing any key
pause
ECHO Step 2 in the server reset is running: Restarting OPMN processes
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl startall
END
The commands regarding ECHO and the pause break can be omitted, but for supervision it is better to see if all processes are started in working order.
Please note the absolute paths, these are from my personal setup as they are the default from the manual. Adjust if necessary.
As User Account Control (UAC) does interfere a lot with programs in Vista (32 & 64) and from SP3 also with XP, please assign administrator rights to the reset.bat file.
This solution should take care of the "OPMN (is it running?)" issue, without rebooting or cold restarting the server.
Edited by: user10221595 on Oct 6, 2008 9:18 AM

-- self found answer

Need solution for unicode error

Similar Messages

Maybe you are looking for