Need solutions for PC to HDTV connection

Alright folks after searching around and not finding exactly what I'm looking for, it's time to post a new thread. I've been to multiple sites reading their information, watching their videos, trying what they say to do. No joy still. I have a question about connecting my bosses older computer to a new HDTV, the vision here is a room full of decision makers with my boss at his computer running a PowerPoint presentation, (so we can all see it without crowding around his desk) then we make decisions as a workgroup, looking at the HDTV from around the table. He also needs to have the PPT presentation on both his monitor, and the HDTV screen. Computer Specs: DELL Optiplex 760 Video Adapter: ATI Radeon HD 3450 w/DVI-D out, and 4 pin S-video out The video adapter DVI out has a splitter cable attached that connects via VGA connectors to two DELL monitors. The S-Video port is unused (I tried to connect this way but could not). HDTV Specs: The HDTV has S-Video in, HDMI x3, RCA, VGA x1. Cables available for use: 25' VGA w/audio 20' S-Video 4-pin Can we connect using current hardware or do we need to purchase extra hardware? What type of hardware? We have BestBuy stores # 763 and 852 at our disposal if materials need to be purchased.

There is no reason other than hardware failure for your S-Video not working. Make sure that when your S-Video is connected, you change the PC's display to clone mode. Right click anywhere on the desktop and click on the ATI Catalyst Control Center. If it prompts you to choose between basic or advanced, choose advanced. The menu to left should have a "Manage Displays" option or something similar. You can set the monitors to clone from there. If you do not have a Catalyst option after you right click, you can go into display properties then settings then Catalyst Control Center.
This is probably something you already know, but just in case... Make sure the TV's source is set to S-Video

Similar Messages

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Are there any solutions for Apple Studio display connectivity to a new Air?

Are there any solutions for Apple Studio display connectivity to a new Air?

Again.. I have an Apple Studio Display (17", LCD)
and want to run it on a new MacBook Air.
Specifications at:
http://support.apple.com/kb/SP110
Any solutions or advise?

Need solution for opening multiple connection to server in parallel

Hi..
I have used URL and URLConnectin classes to open connection to server,
and i used URLConnection.getInputStream( ) to download HTML pages.
Now my requirement is to open more than one connecton to single HTML document and download the file in parallel.
for example, if the HTML file size is 60KB..then i open three connection and
connection 1 downloads first 20KB
connection 2 downloads second 20KB
connection 3 downloads final 20KB
all the above should be done in parallel....by threading or else..
first of all i want to know is it possible to do the above in java?
anybody having solution for the above requirement?
venu

hi,
i too have the same problem
actually i am designing a download manager ,and had the same problem
that how to put multiple threads for doing it ,,,,
have u got solution for it..
if so please help me..
my mail id is [email protected]
i want help in designing the download manager
can any one help me out plzzzzzzzzzzzzzz
bye

One solution for Apple TV losing connection to its iTunes Library

In 2012 I bought an Apple TV3 to let me use the AirPlay features of my New iPad with my HD TV. All worked fine and still does. Later in 2012 I subscribed to Netflix and enjoyed streaming movies to my HD TV via the Apple TV. Having had such a good experience with it so far I bought another for our bedroom TV and another for a relative, hoping they would have the same great experience with it.
Both of my Apple TV units at my house have worked flawlessly since installing them. We can start watching a Netflix movie downstairs then go upstairs and carry on where the movie left off.
At my relative's house the experience was not so flawless and has resulted in about 2 months of frustration but happily their AppleTV3 is now also working as expected. It has been quite a journey to get to this point and had a surprising solution.
I am the 'go-to' person in my family for these things so I installed the Apple TV for my relative.
My relative has a Windows XP (SP3) PC running the latest iTunes (11.0.2), a BTHomeHub 2 router, connected by WiFi to the Apple TV. The PC was connected by ethernet cable to the router. I installed the Apple TV, set up the hdmi connection to the HD TV, connected it to the WiFi network, upgraded to the latest iTunes on the PC, added the Apple ID for Home Sharing to iTunes and the Apple TV and could connect to the iTunes library on the PC, all good so far. I could play video or music or podcast or view photos from the iTunes library on the PC but after a short time (a few minutes or so), if I tried to play a different video or music track the I would get the familiar spinning icon and the Apple TV would not play the media file. Often the Apple TV would still show the contents of the iTunes library but would not play anything from it. When it was in this state it was still possible to play iTunes Trailers or Purchased content or a Youtube video or display photos from my library. This proved it was still connected to the internet and to some extent my library on the PC because it could display photos.
Initially I thought it was a WiFi problem as that was how the Apple TV was connected to the router. So as I already had a Powerline ethernet link running from the router to the TV for the Humax Freeview box for the BBC iPlayer, I ordered a small network switch to share the Powerline ethernet cable with the Apple TV. However the same drooping connection problems were apparent. I tried changing the QoS settings on the Powerline link, tried to prioritise TCP or UDP or both , but no improvement. I decided to abandon the Powerline link in case it was 'too slow', perhaps that was the issue.
I tried one of the Apple TV units from my house, where they were working fine and I got the same problem, at my relative's house it behaved like their unit, it would connect play a movie (all the way through if we let it) but after a few minutes if trying to play something else it would not play anything further. I tried their Apple TV at my house and it worked there, so the unit was not at fault.
At various times while troubleshooting these problems I have unistalled iTunes, reinstalled it, uninstalled Bonjour, reinstalled it (it comes with iTunes), searched the registry and cleaned it (Warning: do this at your own risk as you risk destabilising Windows), I have tried disabling my firewall on the PC and/or on the router, uninstalled the Antivirus / Firewall software (Norton) on the PC, I have added the Ports required for the Apple TV to my router and firewall software, I have read many, many forum posts about what has worked for other people and I tried them all in various combinations.
I decided having tried the above that the problem must be the Windows PC, so I swapped it for a few days with a laptop, connected wirelessly to the router. I had an iTunes library on the laptop so I shared it with the Apple TV and stopped iTunes running on my relative's PC. For a few days it actually worked, the Apple TV would play one movie/music track and I could select another and play it after a few minutes, a partial solution had been found except the laptop was needed elsewhere and I wanted the Windows PC to be the source for the iTunes library. I briefly considered suggesting they should buy a modern PC or Mac as their Windows PC was around 9 years old, may be that was the problem? This would have cost around £400+ and was out of the question. Fortunately I had a spare PC and I decided to swap it with the Windows PC, it was only a couple of years old and as such it must be 'better' I thought. Swapping one PC with another and transferring e-mails and documents etc. took quite a few hours but it was done. I uninstalled iTunes, reinstalled it and set up the home sharing again. This second Windows PC was running XP (SP3) and Norton 360 Firewall/Anitvirus software. I checked that after installing iTunes the Program rules in Norton were allowing the TCP and UDP communications expected by the Apple TV, I noted these were not specific ports but all TCP and all UDP communications were allowed. All of this met the recommendations that other posts had suggested. I tried it with the Apple TV but no, exactly the same problem, the iTunes library could not be found after a few minutes.
I found that if I restarted the Apple TV it would connect and play a file (movie/music etc) but if I played an iTunes trailer or just waited a minute or so then it would lose the connection. Another symptom would be when I landed on the 'Compters' icon it would tell me to 'enable home sharing on the PC with this Apple ID' , which I had already done.
If I tried playing via the Apple TV while selecting tracks from within iTunes on the PC, then sometimes the AirPlay icon was present or not present, sometimes worked and would then always not work until I restarted at least iTunes and the Apple TV, if not also the router or PC, whatever I tried it would not result in a connection between the Apple TV and the PC that would survive more than a few moniutes at a time.
Having swapped the Windows PC hosting the iTunes library with another I swapped the Apple TV again with one from my house, again same behaviour. So this suggested the problem was the BTHomeHub router as that was the only bit of hardware not exchanged. I compared its settings with the same unit at my house, I tried forwarding ports, I tried chaging the security from the default 'WPA & WPA2' to WPA or WPA2, still no solution. I tried reducing the default WiFi connection protocol from 802b/g/n to 802/b/g. I tried variations of all the other possible settings that could be changed but in the end set them to match the ones at my house. Still no solution. I considered buying an Airport Extreme or similar to link that via an ethernet cable to the router and enable it to be the WiFi access point for the Apple TV. This would have cost around £80 similar to the cost of the Apple TV itself, so was also dismissed as an idea.
I decided to restore the router to factory settings, this was done and I set up the WiFi connection again to the Apple TV, still no solution, same behaviour on the Apple TV. I decided it must be a problem with the WiFi so I tried a direct ethernet cable trailed through the house from the router to the Apple TV to eliminate the WiFi involvement, that would have to be the answer, wouldn't it? No, same problem.
I discovered some useful diagnostics along the way that are somewhat techie but worth persevering with as they could be useful for diagnosing what the problem could be. Find out on your router what the IP Address is for your computer that is hosting your iTunes library and the IP Address for your Apple TV. The IP address is essential for either device to connect with each other or the internet. The Apple TV IP address can be seen via Settings/General/Network, it has the form like '192.168.1.69' and for the PC it was '192.168.1.80', the values don't have a particular significance but the last digits after the 3rd dot will be different for each device.
On the PC (or Mac), open a Command (PC) or Terminal(Mac) prompt and try to 'ping' the Apple TV to see if you get a response
e.g.
c:\ping 192.168.1.69
or
c:\ping apple-tv
You should get a response indicating the number of milliseconds it takes for the 'ping' to be returned to the PC from the Apple TV , this will show that the PC can connect to the Apple TV, if it does not get a response then you should check that the PC and Apple TV are connected to the same network (either wired or wifi). You must be able to get a successful ping for the connection between the PC and the Apple TV to work at all.
Another diagnostic is to check the network status on the PC (or Mac)
e.g.
c:\netstat -an
This will show all the current TCP/UDP connections and also the local and remote IP addresses and ports. Look for the IP address of the Apple TV in the third column, there will be many rows returned so just concentrate on the rows with the IP addressses of the PC and the Apple TV
e.g. look for rows like the following:
TCP 192.169.1.80:3689 192.168.1.69:49123 ESTABLISHED
UDP 192.168.1.80:5353 *.*
UDP *.123 *.*
TCP Port 3689 is used by the Apple TV to communicate with iTunes for playing content. This connection is essential, there may be more than one 'established' connection to the remote Apple TV from the local PC.
UDP Port 5353 is used by the Apple Bonjour service to send multicast communications between iTunes and any iOS devices on the same network, such as the Apple TV, again it is essential.
Port 123 is used by Apple products to obtain the date and time, the UDP row above shows that any local IP Address can communicate with any remote IP address on the router's network and provide it with date and time information.
If your firewall software on the PC is blocking any of these ports then the 'netstat' command is useful to see if you need to unblock any. In my experience, this port unblocking was not necessary as when I installed iTunes, the Norton software automatically set up appropriate rules for the iTunes program, and opened the required TCP and UDP communications as iTunes needed.
Likewise, on the router itself, I have the UPnP setting enabled and this allows software like iTunes and Bonjour to traverse the router's firewall without it being necesssary to explicitly set the ports to be forwarded.
If I started the Apple TV, and ran the 'netstat -an' command over the next few minutes I could see the number of rows for the Apple TV diminish, and this was a symptom of the dropping connection problem.
Ultimately having replaced the Apple TV with another 'working' one , swapped the PC, restored the router to factory defaults, disabled the Windows or Norton firewall, tried ethernet and WiFi connection between the router and Apple TV it struck me that the only component I had not considered was the insignificant ethernet cable linking the PC to the router. This has been present since the router was installed for the original PC around 4 years ago. But surely this was how the original PC and the swapped in PC were getting to the internet quite normally and successfully? Also this was how the Apple TV was accessing the PC via WiFi then via the router through this ethernet cable, there was no way it could be the cable, cables don't allow a connection for a short time and then cause a timeout can they?. Thus, confused, and with all other avenues explored, I removed the cable between the PC and the router and enabled a WiFi connection from the PC to the router. After restarting the PC, Router and Apple TV, just to be sure, I tried the Apple TV again.
I could play some music on the Apple TV from the iTunes library, I could play it for a minute or so and then go to movies and play a movie from the iTunes library. I tried to play an iTunes trailer, some YouTube videos, these worked as usual. I then went back to the library and yes, I could play another music track or another movie. I forced the Apple TV to 'sleep' via Settings/General/Sleep Now and tried again, I woke it up and could play any music or movie from the library. Elated, I went out for meal with the family, nervously hoping throughout the meal that the solution had been found. After a couple of hours we returned, woke up the Apple TV and yes, oh yes!, it would connect with the library and play a succession of music or videos without seeing any dropped connections. Several hours later I could wake up the Apple TV again and select any content from the iTunes library on the PC and play it, finally the unit is behaving as I would expect.
This solution may not apply for all, but it worth following all of the components in the path between the Apple TV, router, computer (either PC or Mac) and the iTunes library and checking that each is able to commmunicate successfully and over a period of time reliably so that the Apple TV can perform as flawlessly as it is capable of.
Don't, as I did expect the solution to involve a complicated series of special settings of ports or communications protocol changes. Do perform a clean install of iTunes and keep it updated, do keep Firewall settings simple and let the settings be default settings, do rely on UPnP (Universal Plug and Play) on the router. Let the router select which channel it wants to use, it will select the channel with least interference...and check out that insignificant ethernet cable if you have one. It might work fine for general communications from the computer to router to the internet but it can be a source of connections dropping on the Apple TV!
My relative is now a happy Apple TV user too.

Useful to watch what is happening to the TCP/UDP connections when the Apple TV is connected to iTunes and when it is actually playing some media from iTunes and when it stops playing.
To see this, use the Network Statistics command 'netstat' from a Command prompt (Windows PC) / Terminal Window (Mac):
e.g. for Windows:
c:\netstat -an 5
This repeats the netstat command every 5 seconds, use Ctrl-C to quit the command. (Use 'netstat -h' for help with this command)
While iTunes is running there will be a number of TCP records displayed for the computer's IP address using port 3689, showing at least 3 ports in use for the Apple TV's IP address.
i.e.
TCP host_ip:3689 apple_tv_ip:49187 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49196 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49255 ESTABLISHED
When it is playing content there are more connections established, some of these rows will gradually disappear when the media file stops playing. These addional TCP records show iTunes using different ports from 3689, but only while media files are being played.
When a video file is played, (on this Windows PC at least) the iTunes host is using ports 4463 and 4464, with the Apple TV using port 7000. When playing a music track or podcast, the iTunes host is using port 4472 or 4489 and the Apple TV is using port 5000.
When the media is playing, the fourth column returned by the 'netstat -an 5' command : 'State' shows as 'ESTABLISHED' and shortly after the media file is stopped playing it shows as 'TIME_WAIT' until the record disappears after a minute or so.

Need Solutions for these Errors

<b>Hello Group !
    How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:</b>
     1.SID missing.
     2.Idocs Missing or No Idocs arrived from source
        System.
     3.Errors in the source system
     4.Missing messages at transfer rules or
       Update rules.
     5.Data sent but not received.
     6.Errors in the source system.
    Have a nice week end
    Vijay

Hi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar

Solution for Ovi Suite 3 connectivity issue on Win...

I tried searching web for solutions but in vain, so I found it in a way I never anticipated for Nokia software though I used it many times for other software)))
After much pain, there's a simple solution for those using at least Windows 7 (as I do).
After installing Ovi Suite, do not run it out of installer, but just finish it.
Right-click on Ovi Suite, choose Properties (bottom line), in the window that appeared chose Compatibility tab, there select Run this program in compatibility mode - Windows Xp Service Pack 2.
Then OK or Apply - anyhow, after applying these settings, launch Ovi Suite, choose Use bluetooth instead (my problem was that the 'installing bluetooth modem stage' was looong and resulted in failure and, thus, impossibility to connect. Even through 'shamanism' syncing didn't work).
REMARK! On Serching for bluetooth devices you may need to do Search again so that after selecting your phone, Next button became active -> then as by the book)
Now works.
Nokia programmers don't know how to handle Windows 7 API properly???

[SOLVED]
My Solution:
1) Backup contacts using PC Suite.
2) Update firmware to v410 using PC Suite. Install my phone E66
2) Uninstall K lite codec pack n remove all related registry.
3) Import contacts back to my phone E66. Uninstall PC Suite and all nokia related drivers, registry n folders from computer. Phone driver also uninstall.
4) Reboot. Install OVI Suite 2.1.1.1. Install E66
5) Download n install K lite codec Full version 5.6.0. Set ffd show filter to open as many media files as possible. Set ffd show filter to open base on whitelist. Set ovi suite and nokiamserver.exe into ffd show filter blacklist.
This solved my problem 2 above. Hopefully its not a temporary fixed.
6) In OVI suite select auto sync off for everything. Connect E66 to phone, wait for 10 to 15 mins. Backup function should work. Backup phone.
With this problem 1 above is solved.
Last but not least, use task manager to kill nokiamserver.exe process manually. After ovi suite is exited. Hopefully, nokia will set ovi suite to kill the process when ovi suite exits in the near future.
7) Now you can add applications, configure your phone with your operator settings.
Cheers.

Need solution for this query

i want solution for shape & append query as run in access for oracle
RS.Open "SHAPE {select ID,MAX(Module_Name) AS MainMenu from USER_MODULE GROUP BY ID} APPEND ({select ID,NAME,USER_module.srno,iif(right(param_str,1)='P','ü','') as Allow,iif(left(param_str,1)='A','ü','') as Ins,iif(MID(param_str,2,1)='E','ü','') as Edit,iif(MID(param_str,3,1) = 'D','ü','') as Del,flag,CODE,NAME from USER_MODULE left join user1 on user1.srno=USER_module.srno where user_name='" & Master_Rst!USER_NAME & "' or user_name is null} RELATE ID TO ID) AS AA", G_CompCn, adOpenDynamic, adLockOptimistic

If you are in migration from one DB to other - you should not go with one to one convertion.
First understand the business requirment - whats working and how is it working and whats expected out of your new code etc.
Then decide what to place and how using your new DB.
There might not be one to one exact match in all DBs.
Simple example if you find any connect by prior in oracle - can you replace it with simple SQL command in ACCESS / SQL SERVER as it is without any functions?

Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+

Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

Need solution for multiple Firewire needs

My new 27" 2011 imac will arrive next Monday. I'm now trying to define and solve all potential hurdles.
I seek recommendations on how to best solve my need to attach 2 original firewire cables, into this imac that only comes with 1 firewire 800 input. Both connectors are critical to my work. One connector will turn hard to the right for about six feet to connect to my Digi02 audio interface. The other cable connects and turns hard to the left for 15 feet to connect to my Epson 2200 art printer. Both of the outboard equipment need the original firewire.
I have considered daisy chaining the audio interface and the printer. Except they are on opposite sides of my studio, and I prefer NOT to use a 25 foot firewire cable between such critical peices of hardware.
A better possibility may be a firewire hub, although it will probably also need adaptors for the different versions of firewire i need. That seems rather inelegant. Another possibility would be to get one USB to firewire adaptor and one firewire to 800 adaptor. Do these USB to firewire adaptors work OK?
Anyway, which of these methods would you recommend as my best choice? Are there other choices i haven't mentioned here?

The guy is totally correctin his review.
That is how FireWire works. The FireWire bus will run only as fast as the slowest device on the bus. So as soon as plug in a FW400 device, everything is then clocked down to 400FW.
If you need to have both FW800 and FW400 devices running at their native speeds you need two FW busses each with their own controller.
Because of the limited expansion capability of the iMac, I don't see any way for you to get around this limitation.
If you get a Mac Pro then you could use a FW PCIe card for the second bus and controller.
Allan

Need solution for a Reporting Requirement

Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry       Invoice Number      Due Date      Amount
8111                   IV1                  13/04/2011 1000
8111                   IV2                  17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry    Week End date AR Amount due
8111     12/04/2010     0
8111     19/04/2010     1000
8111     26/04/2010     2000
8111     03/05/2010     2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
Vipul

Hi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards.

One Solution for Fixing Slow Wireless Connection

Quick and easy solution for slow wireless connection.
My hardwired PC connection was working fine over FIOS, but my wireless connection through my Macbook Pro was soooo slowwww, although the machine itself was fine. Pages would take forever to appear, then finally sort of pop up. Didn't really seem to be a Mac problem, just a connection problem.
After searching forever to find a fix, I found a quick & easy solution that works at least for now: change your DNS address.
I'm not a techie so I don't know ALL of the implications of doing this, but in desperation, it has worked for me and I think at no risk to your network or machine. Changing my DNS address has made my connection blazing fast and relieved many weeks of frustration.
HOW: I can only share how to change on a Mac. (Please chime in if you can give directions for PC. ) Just go to this Apple support page, which will outline exactly how to do it. I used 4.2.2.2, I think you can also use 4.2.2.1 as the DNS address. http://support.apple.com/kb/TS2002
Other resources I've found follow:
(specific to FIOS): http://www.stationstops.com/2008/04/16/high-speed-internet-3-tips-to-optimize-your-verizon-fios-broa...
(Specific for Mac): http://forums.macrumors.com/showthread.php?t=358919
Maybe this is a commonly-known fix but it wasn't for me, so hopefully it will help some of the other less-than-technical people out there. Good luck!

Actually this is a common problem with Mac OSX (http://rubyisbeautiful.com/2008/2/8/osx-dns-fix-update) and how it does DNS lookups and pertains to routers that provide the internal gateway (i.e. 192.168.1.1) as the DNS address which is what the ActionTec does by default.
You can change that at the router level to either push out Verizon's dns that the router then uses or any other open dns server. I had to do this a long time ago for some of the OS X boxes on my network.

I need solution for this query

hi all,
could anyone please send me solution for this query these are the database tables am having
TABLE NAME :USERS
ATTRIBUTES
UNAME
PASSWORD
GROUPNAME
TABLE NAME:GROUPS
ATTRIBUTES
GROUPID
GROUPNAME
my requirement is that i need 2 acces the groupname of a particular user and the reamining groups to which i doesn't belong in A SINGLE QUERY
my result needs to be like this
Authorised group
consultant
UNAuthorised groups
sales
vender
recruiter
admin
if any body got the solution please send

hi All,
I have 3 tables 1)PREVILEGES (groupname, previleges(values y or n only))
2)GROUPS (groupid, groupname)
3) USERS (uname, groupname).
Here each user belongs to one group, each user hav a default previlege means example if user is consutant then he can access only consultant group. Means default previlege will be used. For default previleges, there is no record in Previleges table.
The Problem is that, I need to reterive the groupname from users which de doesn't belong as well as his previleges from previleges, If there is no values in previleges in the table it should return n. or value what is therey.
the different groups are
SALES,CONSULTANT,VENDER,RECRUTER,ADMIN

Need solutions for Budget, Landed cost and difference in 2005b and 2007B

Hi all,
Need help for the following scenarios
1. How to define budget for Purchase order and cost centers
2. Landed Cost in SAP B1 2007 how do we do? I am getting an error message stating that Landed cost allocation account is not defined....
3. Difference in 2005B and 2007B
Regards
Shashi

Thankyou Jasper,
Landed cost problem has been solved.
Regarding Budget set up My client need Budget at costcenter level. i.e Cost center wise they want the budget. As of my knowledge to do this we need to activate Account segmentation right?
Without doing that is there any other way where we can set Budget cost center level also?
one more thing, there is a check box of purchase order, Goods Receipt and Accounting at the time of setting up Budget in General setting? what it is for?
Regariding difference in 2005b and 2007B I was not able to get documentation on this.
Regards
Shashi

Need solution for dynamic pick lists in Crystal Reports

Does anyone have a good solution for creating a dynamic pick list for a Crystal Report that is based off of a BW Query without having to use a BW user input variable? In many cases it is not practical to use a BW variable to generate a dynamic pick list due to the high number of possible member values and the highly dynamic nature of the particular characteristic (customers, materials, etc.). In my understanding the LOV Server is not an option when dealing with SAP BW. Anyone else running into this issue with Crystal and SAP BW?

Hi Mike,
we once solved this by creating LOVs in BusinessView Manager. I am not sure if you can use the BW Publisher in this scenario as we did not use it. We published the reports directly to the BOE server for some reasons.
Creating a LOV in BusinessView manager is really easy. You can create cascading prompts, shedule refreshing of the lists, ...
By using the cascading prompt feature you can make prompts like this:
First enter the customer number (or pick it from a list) and then the second list, which holds the materials only has shows the ones which had been purchased by that customer. I think this is what you are looking for.
You should give it a try!
Thorsten

Need solutions for PC to HDTV connection

Similar Messages

Maybe you are looking for