Need some guidance to use Airport Express as a bridge

We currently have an Airport Extreme base station, which is working really well for all the wireless enabled computers in our home (my iMac and 2 laptop PC's) but we now have a bit of a challenge. Our daughter has an older desktop computer (PC running Win XP) in her bedroom which doesn't have a wireless card installed. If we purchased an Airport Express, could we plug it into an outlet in her room and connect her computer to it via the ethernet cable? Will the Airport Express pick up the wireless signal from the Extreme base station and enable her to have internet access? I hope I'm making sense, I'm not very computer savvy and don't know all the lingo. <g> Any help/guidance would be greatly appreciated as we haven't purchased the Express yet and won't if it won't suit our needs.

Welcome to the discussions!
+If we purchased an Airport Express, could we plug it into an outlet in her room and connect her computer to it via the ethernet cable? Will the Airport Express pick up the wireless signal from the Extreme base station and enable her to have internet access?+
Yes, this will work very well. Just be sure to get the AirPort Express 802.11"n".
You will configure the Express to "join" the wireless network that the AirPort Extreme is creating and "enable ethernet clients". (I assume that there is adequate signal strength where the AirPort Express will be located).
Post back if you need assistance during the configuration.

Similar Messages

Using Airport Express with Netgear bridge

I have an imac G3 with a Netgear Wireless ethernet bridge which I use to get wireless internet from a Netgear DG834GT wireless router/adsl modem . -this works fine.
I would like to be able to send music from itunes on my Imac to a Airport Express in another room so i suppose my question is - will the netgear wirless ethernet bridge (a WGE101) on the imac see the aiport express?

Yes it will - but the concept isn't exactly as you described it. What you will be doing is setting up the Airport Express to "join" the wireless network created by your Netgear wireless router. Music streamed from your iMac is sent first to the Netgear wireless router, then the Netgear wireless router sends it to the Airport Express.
To set this up, see the instructions posted here by David Lovell (works for PCs and Macs):
David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT

How do I use airport express to extend my wireless network?

How vcan I extend the range of my wireless network using Airport Express?

It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
name of the wireless network
the correct wireless security settings
and correct password.
"Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc. Extremely limited.
Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet. What exactly would that achieve?
That is a completely different subject since this discussion is about extending a wireless network using wireless only.

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

Using Airport Express to extend an existing wired/wireless Dlink network

Our network uses a Dlink router which must be located in the basement. Our home office Apple computers are wired, and the wireless Apple laptop is almost always used in the living room, directly above the Dlink, so no signal strength problems there. However, the wireless signal does not reach as far as the home office. It's only 20-25 feet away on the main floor, but for some reason, probably structural, the wireless signal doesn't penetrate.
Now I need to extend wireless access capability to the home office, so that I can use the iPod Touch in the office. I've read through a number of posts, and haven't found one that exactly matches this issue.
The information about joining an existing network has this sentence in it:
"Or you can use AirPort Express or AirPort Extreme to extend the range of an existing AirPort Extreme or AirPort Express network by creating a Wireless Distribution System (WDS)."
The existing network I have isn't an AX network. And it's both wired and wireless. And one of the detailed posts explained why a WDS was not the best way to go. Plus I'm confused by references to "base stations" which seem to refer to something that looks like a Time Capsule, not to an AX.
If AX will do what I want it to, I'm envisioning plugging it (all by its lonesome) in to a wall outlet in the hallway outside the home office. That's based both on what I want and what the salesperson said AX could do when I explained what was wanted.
The Dlink network has been working beautifully for months, and I don't want to do anything to screw it up! That includes even opening up the AX utility software until I know exactly what to do.
Can I do the setup (once it's explained!) on the wired computer? If I have to connect the AX to the network as part of the setup, can I use the 5-port switch that extends the wired connection the extra two feet to the computer (and also provides the wired network connection for the main printer)? Or should I take the laptop downstairs and connect the AX directly to the Dlink router?
Thanks,
Marg

+If I connected the AX by cable to my 5-port switch (which in turn is connected directly to the Dlink), would that constitute "an ethernet connection to the D-Link"? If so, then it should be possible to use it as described in your 6th paragraph, to "expand ... (our) main wireless network" -- is that right?+
Yes, this will work great.
+I'd never heard of ethernet powerline adapters, which sound very cool but are not wireless per se - you need a cable to connect the computer with at the far end, and it's wireless capability that I'm trying to create in the home office.+
Rather than hooking a computer up at one end, you could hook up the AirPort Express at one one and setup wireless that way. You won't need the adapters in this case since you have access to the switch. You may have need sometime in the future to get an ethernet signal to another part of the house, so keep this option in mind.
Here is how to setup the AirPort Express. You will use AirPort Utility, which should already be on your Mac Pro. Its located Hard Drive > Applications > Utilities.
Temporarily, connect the AirPort Express (AX) directly to your computer with a short ethernet cable to set it up. When you have the configuration done, you can disconnect the cable and move the AX to the location where it's needed.
Open AirPort Utility and click Manual Setup
Click the Base Station tab below the row of icons to enter a name and device password for the device and choose your time zone, etc.
Then click the AirPort icon in the row of icons at the top of the setup page.
Click the Wireless tab below the icons
Wireless Mode....Create a wireless netork
Wireless Network Name....Exact same name as your D-Link wireless network name
Radio Mode....802.11n (802.11b/g compatible)
Channel...Automatic (see note* at bottom)
Wireless Security...exact same setting as D-Link network
Wireless Password....exact same setting as D-Link network
Click the Internet icon in the row of icons
At the bottom of the page, make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)". This setting allows the AX to work in tandem with the D-Link.
Update to save settings.
*Automatic will usually work well for this. Ideally, you want the D-Link and AX to be on channels that are least 5 channels apart. Automatic will usually choose an open channel, but you may need to manually set the channels on both routers for this step.
Your setup should work fine. Please post back on your progress or questions.

Using airport express overseas

I am not internet connection/router/wifi savvy, so please excuse my ignorance on the subject. I have an AX I plan on bringing to Italy with me along with my MacBook and the Airport Utility CD and I was wondering if I was going to run into any problems using it there. I looked at the tech specs and found this:
Channels
* Channels 1-11, 36-48, and 149-165 approved for use in the United States and Canada
* Channels 1-14 and 36-64 approved for use in Japan
* Channels 1-13 and 36-140 approved for use in Europe
* Channels 1-13, 36-64 and 149-165 approved for use in Australia, Hong Kong, and New Zealand
I saw that and said to myself WHAT DOES THAT EVEN MEAN!? Anyway, I would really appreciate any help. As you can see I'm pretty much a lost cause when it comes to this type of stuff. Thank you!

Don't worry about that stuff. Nobody ever pays any attention to it.
Your Airport Express will work fine in Italy. You will need to get the Apple World Travel Kit to get a plug module. Those adapters they sell at airports are just ugly.
You may have some trouble connecting the Airport Express. Will you be connecting at a hotel or something. Often those hotels require web-based login pages which you would not be able to configure from the Airport Utility. If you can get a plain Ethernet connection that doesn't require any additional authentication, you could just plug it in and go.
If you really had to, you could do some MAC-address spoofing to fake it out, but may be more than you want to do.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

Hi , i need help for resetting my airport express as a repeater since this one is already register to old wifi. thanks

hi everyone. i need help for resettting my airport express as a repeater. i bought is airport express 2nd hand. so now this one already registered to old wireless.
could anyone have any advice. thank you.
now the airport express is blinking yellow color.
my main base is using time capsule. this is a new one so when i first turn it on and set it up in airport utility its very easy.
now setting the repeater (airport express) is ............ ???
thanks everyone.

Do a factory reset, then it'd be like it's new from the Apple Store.
http://support.apple.com/kb/ht3728

How to use Airport Express as a sound output device

Guys,
Is there a way that I can use Airport Express as a sound output device? So, I can play all the sound on my HIFI.
thanks in advance

In order to listen to the non-iTunes audio streams through your Airport Express you will need to use the third party software Airfoil.
http://www.rogueamoeba.com/airfoil/
iFelix

Anyone used Airport Express as bridge w. wireless router other than Apples?

I have my QS 867 hardwired to my highspeed modem and a Netgear 624GT wireless router attached. My PB has been having trouble with the signal in certain spots due to all the jazz about the alum interfering w. the antenna. When I try to setup the Airport Express with my Netgear network and use the Airport as a bridge/range extender, it does not recogize the Netgear router. It seems to specify in the instructions that you MUST use an Airport Extreme Base Station. Is this true? Has anyone used the Express as a bridge with a wireless router other than the Base Station?

At one point in time I did have an Airport Express working in WDS over WEP with the Belkin F5D7230-4 and F5D7130. It's unsupported and difficult to get setup. It tends to causes them to lock up and need to be rebooted.
We ended up just dropping the Belkins and getting more Airport Expresses as the Belkins couldn't support doing WDS over WPA (which we've since moved too).

Using Airport Express as internet connection for one Mac and one PC

Will probably be judged a complete dork for this question. I have successfully set up my Imac G5 to run an internet connection through an Airport express. My partner runs a PC (Windows XP) and I want to connect this too. Have installed a USB wireless card on the PC, and installed Airport Utility, but it just won't find the Airport Express - it will however find the Imac with something like 96% signal strength. So I set up a network on the Mac and have successfully linked into it with the PC, but it soon comes up with a connectivity problem that will not allow internet browsing. So two questions - can I connect two computers to the Airport Express at once for internet browsing, or do I have to do it through linking the PC to a wireless network? If the latter is the route - any ideas on what the connectivity issue will be? Help!

No, not if the AirPort Express "joins" the wireless network.
No, I do not want to join a network.
It is possible to have the AirPort Express "create" a separate wireless network that would not have access to the Internet, but if you did this, you would need to log off of your normal network....(losing your Internet connection) and then log onto the AirPort Express network when you wanted to listen to AirPlay.
Then, when you wanted to have Internet access, you would have to log off of the AirPort Express network and log back onto your normal wireless network.
Ok, I understand that it is not possible to use airport express only for sound streaming while having an Internet connection at the same time. Airport express does need to join a network if I want sound streaming next an Internet connection. I wanted airport express not to get into way of my Internet connection because in this case the sound streaming messes up sometimes. When I configure airport express only as a sound output, the problems I encounter fade away but then I cannot access to the Internet. Anyhow thanks a lot for the answer.

Need a little help please Airport Express

Need a little help please.
I am trying to set up a wireless network at my home using Airport Express.
I have a regular phone line running in to I assume the modem. From there, there is an Ethernet cable running from that box to the back of the PC. My question is, I think, which of those do I unplug and plug into the Airport Express, the one on the back of the PC or the one that is in the back of the modem, or is this totally wrong.
Any help would be appreciated…
Thanks
In advance…
PS I have the manual but to me it is not very clear…

Your connection sequence would look like this:
Internet > Modem > AirPort Express >>>wireless to your computers.
This means that you would unplug the cable that is now connected at the back of your PC and move that connection to the AirPort Express.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue to follow the guided setup. On the third page, you will choose the option to "Create a wireless network" and continue the setup.

Need some guidance to use Airport Express as a bridge

Similar Messages

Maybe you are looking for