Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

Similar Messages

Deletion of data from change log table and PSA

Hi,
For a DSO I want to delete data from "Chnage log table" and " PSA Tabel".
For the DSO manage screen I have seen " Environment-> " Delete changelog table" from this we can delete chnage log table data as per my understanding.
at PSA Level Mange screen also I have seen " Environment-> " Delete changelog table" from this option also it deletes the data from change log table or it deletes data from PSA table?.
if this option also deletes data from changelog table then how we can delete data from PSA table?
Please clarify me

Hi,
I am not sure what are you referring to from your point "PSA Level Mange screen also I have seen " Environment-> " Delete changelog table". When ever you click on manage for your psa you will be routed to a popup where you can see all your requests in the PSA table & there after if you click on any single request you will get Environment menu option but there wotn be any change log deletion option available. Please check again? Right clicking on your data source will take you to the manage requests for PSA. You can selectively delete the requests as required.
For DSO when you right click on manage you can directly find Delete change log data option in the Environment tab. there you can select the requests you want to delete.
Also if you want to automate the deletion process then you can simply create a chain and include the steps for PSA deletion & change Log deletion accordingly.
Also it is recommended to keep on clearing the PSA table & Chage log data at regular intervals as it saves the disk space & thus helping in performance optimization
Please refer the below doc at SDN, it will be helpful for you in automating the process of change log deletion & PSA deletion.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Hope it clears your doubts
Thanks

Open Hub fetching data from Change log table

Hi Gurus,
I have a scenario where in I have an Open Hub destination whose source is a DSO, and we are sending data into SAP Data services. We found that the data being sent is from the change log table. Is this how an Open Hub with DSO as a source works ? Or is there any possible way we can send data from the Active table of the DSO, when the DTP is run.
Kindly help. Thanks in advance !
Regards
Snehith

Hi,
For Extraction from the DataStore Object, we have the following options for Delta init Extraction:
Active Table (with Archive)
The data is read from the active table and from the archive or from a near-line storage if one exists. You can choose this option even if there is no active data archiving process yet for the DataStore object.
Active Table (Without Archive)
The data is only read from the active table. If there is data in the archive or in a near-line storage at the time of extraction, this data is not extracted.
Change Log
The data is read from the change log of the DataStore object
We can select any of these options for data trasnfer.
Regards,
Geetanjali

*Query needs The Delta changeed records from Change log table*

Hello Friends,
I got an requirement where they want to see the current data and also the changes that happened last week. For e.g.
Sales Order 1       100 Qty      Nov 1 2009
sales Order 1         50 Qty      Oct 25 2009
as you can see, they want to see these both records in the query. I am running out of ideas , on how to establish this scenario. Can we some how report directly on the changelog table where it maintains all the delta changes.....
Appreciate your answers........ Thanks for your time......

Hi,
you can do the following:
to find last week
Create a Customer Variable for Calday
EXIT_SAPLRSOO_001 ---> Include ZXRSRUO1 write the code for the variable created above
DATA : date TYPE sy-datum.
date = sy-datum. "Today
date+6(2) = '01'. "First day of this month
date = date - 7. "Previous week before first day of this month = last week of last month
Current week take the system Date ( with give the current week)
                             OR (more options)
Some function modules you can use in exits are
DATE_GET_WEEK - Will return a week that the day is in. ( Current week)
DATE_GET_WEEK -1 will returne the previous week of the day is ( previous week)
Santosh

I want to get data from only RESB table without loss of any deltas

i have to fetch the reservation details for the production orders.
we are using descrete manufacturing method to keep track the Work in process and cost .
for addition of components manually in the production order we can track thru change date i.e From AUFK table with field name AEDAT. for each time when we are adding the components the system will create a new line item In tableRESB-OBJNR(field)
i need very few fields from RESB table to be pulled into SAP BW.
how should i proceed creating a generic exractor without any loss of deltas.
i want to get data from only resb table into sap bw.
how should i proceed with Generice extractor with single table RESB and what would be the delta field . could any one throw some light .
all answers would be rewarded with points

I have few reports for BOM data is to be pull into bw
all the reports contain the same tables Mentione below
MAST- material to BOM LINK
STKO- BOM header
STPO- BOM ITEM
STAS- BOM ITEM SELECTION
how should i create ageneric datsource satisfying that all the data comes from these tables without fail of deltas,
my doubts.1. Do i have to create a separate data sources (generic) for all these individually and load into separate ODS'S AND CLUB THEM into single ODS further.?
if i create i dont know what should be delta field that has to be picked for each datasource
2. Do i have to create a view on all these tables and create a generic datasource.if created what would be the delta field i have to select.
could you pls let me know how should i pull the data without loosing any deltas
could you pls let me know the flow with delta fields mentioned
regards,
P

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

How to get data from hierachy lookup table

there is a hierachy lookup table A, and I want to get data from A.
but the following code does work properly:
WebTreeNode result = catalog..GetHierarchy(tableName,nodeID);
could anybody give some suggestion or solution of getting data from hierachy lookup table,
3x

Hi fei,
Please look at the following code.
I hope it will give you some clues...
private void showHierarchy() throws StringException
    ResultSetDefinition rsd = new ResultSetDefinition(<code name of your hierarchy table>);
    rsd.GetFields().Add(<code name of a field in your hierarchy table>);
    Search search = new Search(<code name of your main table>);
    WebTreeNode treeNode = catalogData.GetResultTree(search, rsd, 0);
    printHierNameRecursive(treeNode, 0);
private void printHierNameRecursive(WebTreeNode root, int level) throws StringException
    WebTreeNodeArray arr = root.GetChildren();
    for (int i = 0; i < arr.GetSize(); i++)
        for (int tab = 0; tab < level; tab++)
        System.out.print("t");
        String catName = arr.GetWebTreeNodeAt(i).GetValueAt(<code name of a field in your hierarchy table>).GetStringValue();
        System.out.println(catName);
        printHierNameRecursive(arr.GetWebTreeNodeAt(i), level + 1);
Regards,
Nir

How to get data from crosstab or table?

hi !
i develop my app with bib 9.0.3.1 . To customize my report,i must get data from crosstab or table component (presentation bean) and generate defined XML file ,can you tell me how to do ?

hi paul
the sample code like this:
try{
     DataAccess dataAccess = thinDataview.getModel().getDataAccess();
int rowCount = dataAccess.getEdgeExtent(DataDirector.ROW_EDGE);
int colCount = dataAccess.getEdgeExtent( DataDirector.COLUMN_EDGE );
     for ( int i=0; i<rowCount; i++ )
     for( int j=0; j<colCount; j++ )
               String dataValue = dataAccess.getValue( i,j,DataMap.DATA_UNFORMATTED).toString();
}catch( Exception e ){
System.out.println( e.getMessage() );

Can we delete the change log table of ods?

hi bw gurus,
can we delete the newdata,active and change log table of ods?how?what is the advantage?
OR
can we delete the contents of new,active,change log table of ods?how?what is the advantag?
thanks in advance
srinivas

Hi Srinivas
Yes, You can delete the contents of changle log table but not the contents of new data and active data table.
Before deleting the change log data you have to make sure that the requests are not required for further delta extraction or for reconstruction purpose.
Steps
1. Goto Manage screen of your ods
2. Click on Environment tab and select the option " Delete change log data".
Adv:
To free up the disk space.
Assign points if it is useful for u.
Regards
Saddy

Which is the best way to get data from user difine tables with condition

Hi everyone,
I would like using SBO DIAPI to get UDT data rows, there is a method of UserTable.getbykey can get one row information, but I like to get a list of rows from UDT, and the get list have its condition such as: field1="Type_A" ect.
also I want to avoid using doquery get data from DB, because there is direct access DB potential Suspect.
I am using SBO 2005 PL09 & visual studio(VB.net) 2005 and I only using DIAPI do not using UIAPI.
Thanks for any advice.
Kathy

Hi Kathy,
Unfortunately SBObob.GetObjectKeyBySingleValue only works for the B1 business objects as listed in the documentation.
So, when you don't know the keys (= Code) of the records you want to get from your UDT - there's no way around using Recordset object's DoQuery method!
Sorry,
Frank

Need suggestion in getting data using JDBC

Hi all need suggestion,
     i had a VO corresponding to database table.
     when i am try to get the records from that table,
     how can i initialize the particular column value to the
     corresponding VO setter method.
     please do the needful.

Hello inform2csr,
Your question is not so clear.
Can you be more precise?
What is VO?

Getting Data from 2 different table and saving it in the third table

Hi,
My question is i have 2 different table where the data is stored. And Nothing is at Level0 and i don't need it.
Table A will be at Level1, this is a scroll and depending on this value the level2 grid will be populated with the values.
Say for example Table A is groups; data e.g., Cars, MotorBike etc
Table B will have the data for Group Cars: Holden, Toyota, Honda etc., MotorBike: Honda, Suzuki, Yamaha etc.,
Now lets say there are 3 divisions in the company AA , BB
Division AA has been allocated group Cars only
Division BB has been Allocated Both Cars and MotorBikes.
To do this i have used a query view where depending on the Division i choose the group and then i get the required fileds.
Now my Problem is that i need to save this data in table C but on the ad-hoc basis can't write a query with in the code to do that.
tried using work record on the scroll but i cant do that as well. Any Suggestions?
One more thing when the Page open this data should be pre-populated on the page depending on the division, the user will not be able to select anything from the prompt.
Edited by: 952330 on Aug 12, 2012 8:32 PM

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

Unexpected results getting data from two fact tables through conformed dim

Hi all,
We are getting an unexpected behaviour in our OBIEE 10.1.3.3.3. We have this scenario:
We have {color:#0000ff}2 fact tables{color}{color:#000000} called F1 and F2. F1 has one measure, f1m1 and F2 has another one, f2m1.
We have {color:#0000ff}4 conformed dimensions{color}, called D1, D2, D3, Date.
When we are requesting for individual fact tables, we are getting:
date d1 d2 d3 f1m1
dt1 - x - y - z - m1
dt1 - x - y - z' - m2
date d1 d2 d3 f2m1
dt1 - x - y - z - m3
dt1 - x - y - z'' - m4
But, trying to obtain a compare scenario, we are getting
date d1 d2 d3 f1m1 f2m1
dt1 x y z m1 m4
Instead of
date d1 d2 d3 f1m1 f2m1
dt1 x y z m1 m3
Looking at query log, we have catched the reason. That's why BI Server is using to solve this request using ROW_COUNT() to join SAWITH0 and SAWITH1 in SAWITH2 result set. So, the order may not be the same in the results sets in every fact table. More or less, generated query is like:
WITH
SAWITH0 AS
(select ....
from F1),
SAWITH1 AS
(select ...
from F2),
SAWITH2 AS
select from (select ...
ROW_NUMBER() OVER PARTITION (....) c10
from SAWITH0.d1 full outer join SAWITH1.d1 ....) D1
{color:#ff0000}where (D1.c10 = 1){color}
select SAWITH2. ....
from SAWITH2
order by c1..c10
The problems seems to be that BI server is ordering the result sets SAWITH0 and SAWITH1 and getting row number to join this results sets, but this is not getting the correct result.
Any ideas?
TIA
Javier
{color}
Edited by: jirazazábal on Mar 13, 2009 2:46 PM

I have done a logical fact table with two fact table source on it.
The Sql performed against the database was this one.
-------------------- Sending query to database named PRODS_AIX (id: <<153418>>):
WITH
SAWITH0 AS (select sum(T21296.CONSUMERS_SALES_EURO) as c1,
     T21309.DIVISION_CODE as c2
from
     DIVISION T21309,
     C_CONSUMERS_SALES T21296
where ( T21296.DIVISION = T21309.DIMENSION_KEY )
group by T21309.DIVISION_CODE),
SAWITH1 AS (select sum(T21356.ORDER_VALUE) as c1,
     T21309.DIVISION_CODE as c2
from
     DIVISION T21309,
     DWH_SALES_ORDER_OVERVIEW T21356
where ( T21309.DIMENSION_KEY = T21356.DIVISION_KEY )
group by T21309.DIVISION_CODE)
select distinct case when SAWITH0.c2 is not null then SAWITH0.c2 when SAWITH1.c2 is not null then SAWITH1.c2 end as c1,
     SAWITH0.c1 as c2,
     SAWITH1.c1 as c3
from
     SAWITH0 full outer join SAWITH1 On nvl(SAWITH0.c2 , 'q') = nvl(SAWITH1.c2 , 'q') and nvl(SAWITH0.c2 , 'z') = nvl(SAWITH1.c2 , 'z')
order by c1As you can see one select (SAWITH0) for the first fact table C_CONSUMERS_SALES and one select for the second fact table DWH_SALES_ORDER_OVERVIEW (SAWITH1 ) and the two statement are joined with a full outer join.
I ask me why you have the three select (SAWITH0,SAWITH1 and SAWITH2). Can you please paste the complete SQL performed ?
Can you tell us also which SQL is performed if you select only the columns from one fact table and not for the other ?
Regards
Nico
http://gerardnico.com

Need to extract the data from the CRM table : SCAPPTSEG

Hi BW Experts,
I want to extract the Data from CRM Table "SCAPPTSEG" to BW. The dates are stored in UTC Format.So for getting the date in CET format, we have used the Function Module "IB_CONVERT_FROM_TIMESTAMP".
I want to create a datasource for extracting the data from "SCAPPTSEG" table and i need to use the function module for getting the date in CET Format.
Can i achieve this action through Generic Extraction.
please provide me the steps to achieve this.
Thanks,
Shahina.A

not answered

Need suggestion to get data from change log table of ODS.

Similar Messages

Maybe you are looking for