Need to be same functionality badi in ECC 6.0 .

Hi guys,
I need to development a function exit in ECC 6.0 using EXIT_SAPLHRBEN00FEATURE_004.
This function exit is in 4.7EE .
Is there any badi exist for the above function exist with same functionality.
Can any body help me.
Revard poits applicable.
Regards,
See_nivas

You don't really need minimum/maximum postal codes by Province, you can use configuration tables with a combination of Benefits User exits.
IMG==>Personnel Management ==>> Benefits ==>> Define Employee Groupings ==> Define Cost Groupings
Define Cost Groupings
CGR1 = Alberta
CGR2 = Ontario
CGR3 = Quebec
Etcâu20AC¦.
SAP User Exits Function Exit Instead of Feature CSTV1 (Cost Grouping)
FUNCTION EXIT_SAPLHRBEN00FEATURE_004 ( include ZXPEEU04)
Determine Benefit Cost Groupings based on IT-0461-wrkar (Province of Employment)
Read Infotype 0461
Case P0461-wrkar
When "AB"
cstv1=cgr1
When "ON"
cstv1=cgr2
When "QC"
cstv1=cgr3
etc âu20AC¦

Similar Messages

Need Ways to implement Badis in ECC 6.0 (Enhancement Points)

Hi experts,
I am new to BADIs. I've a requirement to find a BADI for changing Customer number while posting customer invoice in SAP (the data is coming from XI system in IDOC format). I want to know any BADIs or userexits are there for my requirement. At the same time I want to know how to implement a BADI in ECC 6.0 .Any docs releated to this topic will be of great help.
points will be awarded for sure..........

hi Poorna Chandras... ,
These steps should enable you to find any BADI related to any transaction in a matter of minutes.
Procedure 1:
1) Go to the transaction SE37 to find your function module.
2) Locate the function SXV_GET_CLIF_BY_NAME.
3) Put a breakpoint there.
4) Now open a new session.
5) Go to your transaction. 6) At that time, it will stop this function.
7) Double click on the function field EXIT_NAME.
8) That will give you name of the BADI that is provided in your transaction.
Business Add-Ins
Procedure 2:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
4) Now Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
SAP Business Add-Ins (BAdIs) are one of the most important technologies used to adapt SAP software to specific requirements. BAdIs were introduced with Release 4.6 and replace function module exits. This technology is not limited to SAP applications. BAdI calls can be integrated in customer applications. These can then be enhanced by other customer applications. In the various SAP applications, BAdI calls are implemented at places where enhancements are appropriate.Business add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, country-specific versions, industry solutions, partner, customer, and so on). You can create definitions and implementations of Business Add-Ins at any level of the system landscape.SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to differentiate between Add-In implementations using the filter Country or other criteria.
The enhancement technique is set up in such a way that it is possible to define interfaces for ABAP soure code, screens, GUI interfaces, and tables. These allow customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently. BADI/UserExists are used to enhance R/3 For customer Needs.
Actually there is no transaction to find when and where the BADI
is called.
1. You can see the BADI description to find why it is called.
2. Once you implemented and activated the BADI, put some break points
in the BADI and see "where else used" option to check in what all
programs this BADI is called. In the ITS debug, when you are doing
the operation what exactly the BADI description tells, it will take
to the break points and you have to do manually debug the whole thing.
I know its bit difficult to do manual debug the whole thing, it
takes lot of time, but you have to be very patience when you are
dealing with BADI's.
Transaction SE18 is the BADI equivalent of transaction SMOD
Transaction SE19 is the BADI equivalent of transaction CMOD .
To find the BADI to be implemented and then implement this via SE19.
Check this blogs 2 find a BADI:
How to find if we have a BADI in Transaction VB02
Re: BADI for screen enhancement in MM01 transaction
Re: BADI and User exits
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
You can check the links for Step by Step Badi Implemntation
(very helpful self learning docs).
BADI Step by Step Implementation.
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
New to Badi`s
New to BADI
New to BADI long question
Badi
/message/4866901#4866901 [original link is broken]
Hope this helps
Rewards if useful.........
Cheers
Kripa Rangachari.

Need to maintain same data in ECC and MDM

Hi ,
Could you please tel me why we need to maintain same data in MDM and ECC seperately.
Regards
Ramya

HI Ramyadixit,
It is important to understand that MDM and ERP do not replace eachother rather complement each other.
Using SAPu2019s ERP suite as the foundation technology for an MDM implementation is problematic because, despite all the positives of ERP, flexibility is usually not associated with SAP systems.
SAP ERP doesnu2019t offer the tools to manage master data in the ways required by todayu2019s complex organizations.SAP ERP isnu2019t designed for active management of critical master data. Specifically, SAPu2019s data matching capabilities are too basic. Its search functions might be good at u201Cexact matchu201D but they are not as strong at the kind of u201Cfuzzy searchingu201D that is so important in uncovering duplicate entries with subtle differences. For the same reason, users are far more likely to create new duplicate customer records in SAP, and thereu2019s no way to create a u201Cgolden copyu201D of master data for use across multiple heterogeneous systems, or to maintain survivorship rules for overlapping data from multiple systems.
These problems are all compounded when you have more than a single SAP instance, or different ERPs altogether, which is a very real occurrence within large corporations that have grown through mergers & acquisitions. Even without multiple ERP instances, most mid-size and larger national firms are likely to pull data from many different systems. In fact, 10 to 30 source systems is not uncommon, and heterogeneous environments are now the norm. The siloed approach to data management whereby customer-facing data is in one system, product data in another, asset data in a third, and so forth, really complicates the integration of processes, data and workflow.
A dedicated MDM hub provides a multitude of benefits not attainable with an SAP ERP-based master data approach. First, a dedicated MDM system is just that -- dedicated to delivering the best possible manageability of your master data across the enterprise, and not just within your ERP technology stack. The focus of any high-quality, enterprise-grade MDM hub implementation is going to be on getting master data right; creating a single source of truth, with each distinct customer, product, etc. represented only once in the hub. This means you can maintain accurate, complete, timely and consistent master data through both data governance and hub technology, with robust data quality and matching capabilities.
MDM and ERP need to coexist for instance as one solution does not replace the other. From an investment perspective, it is important to leverage existing technologies such as data quality, extract-transfer-load (ETL) and data integration tools, middleware, business process management and workflow.
To summarise, the top five reasons not to master your data in SAP ERP are:
1. SAP ERP isnu2019t flexible enough.
2. Master data is different and canu2019t be proactively managed within an SAP ERP system.
3. SAPu2019s ERP products werenu2019t designed for active management of master data.
4. Mastering data in an ERP system is much more difficult with more than one instance or when different ERPs are used together.
5. An MDM hub creates a workspace between an organizationu2019s transactional and analytic systems meaning they fix it once and then extend it for use in back office systems and the data warehouse.
Hope it helps!
Thanks,
Ravi

I need to create a Classic BADI definition in an ECC 6.0 Environment

Greetings all,
Let me start by saying that I work in a corporation with many SAP landscapes at various versions (4.7, ecc 6 etc.) We have an application developed in an ECC 6.0 environment which needs to be pushed down to some 4.7 environments. This development needs some BADIs defined to give the receiving systems some flexibility. Here comes the problem, 4.7 cannot handle New BADIs and ECC 6.0 will not allow me to create Classic BADI definitions. I've searched through notes to see if there is some kind of quick fix and I have not found any. So I appeal to you the enhancement forum. Is there a note? How else can I create something and give the non original systems the flexibility needed?
Thank You

Yes Michelle, you are misunderstanding. I am the Definer of the BADI, not the implementer. I am setting up the hook in the program. One can still implement a classic BADI in SE19 in ECC 6.0. What we are prevented from doing is defining a new Classic BADI. We are forced to define new BADIs.
Try this: Go to SE18, select BADI name and put in Ztestjunk. Now hit the create button:
Here is the error message you will get:
"Create" operation is possible only for enhancement spots
Message no. ENHANCEMENT269
Diagnosis
You wish to create a BAdI definition on the initial screen of the BAdI Builder.
System Response
It is not possible to directly create a BAdI definition. The BAdI definition can only be created as part of an enhancement spot.
Procedure
Either create an enhancement spot or process an enhancement spot that already exists. There you can create BAdI definitions as part of the enhancement spot.

Remote Function Call (RFC) within a BAdI in ECC to CRM

I've a remote enabled FM in a CRM system which I want to call within a BAdI implementation of a ECC system. As a result, the CRM system is the RFC server and the ECC system is the RFC client.
The FM in CRM simply gets the relevant rows of a Z table which, of course, only exists in CRM and passes these rows to the calling program as per parameter supplied by the calling program.
Now the BAdI in ECC is for changing 'Contracts' data in SAP (transactional data) before posting the contracts in the ECC database. The business uses a transaction where a large number of contracts are processed and documents posted in the system - and when this happens the system runs through (calls) the BAdI one contract at a time.
If I call the RFC enabled FM anywhere within this BAdI, it gets the data for one contract only so it reduces a great deal of performance in regards to memory consumption, network load etc. So I want to avoid this and call the RFC FM once instead, if possible.
Is it possible to call this RFC FM once only (to load the CRM Z table data for all contracts) and store it in a global table/area within the instantiated BAdI class (visibility public) so that when the BAdI is called the second time onwards it can read the global table/area by READ TABLE WITH KEY statement and avoid the RFC call for each BAdI call?
I was also thinking about may be using ABAP Shared Memory if this is a possibility in order to avoid the repeated RFC call? But this table on the RFC server changes frequently....so it might not be a good idea? or....??
I would greatly appreciate your inputs and thoughts regarding this; it would be great to hear if someone had had a similar experience.
Cheers,
Sougata.

As the Z table is only updated via a particular program in CRM - we developed and called a RFC enabled FM in that report when its updating the Z table to update the Z table in ECC to keep it in sync.
Short term benefit but might be long term pain if the Z table in CRM is updated by another program/process/application in the future! Not to mention any table field changes in CRM has to be also made in ECC everytime which is again a pain.
This is a workaround and definitely not a full-proof solution - but I guess these days one has to shut up and deliver whatever the customer wants!

HOW TO CREATE BADI IN ECC 6.0 with Enhanance Spot?

HI,
Anyone let me know how to create BADI in ECC 6.0 , which have mandtory to create enhanance spot before to create badi? I dont understand the concept of Enhanance Spot and what is the purpose to create that . Will u plz let me know step wise procedure to create badi ...
Thanks,
saurin.

Hi,
Implementing Business Add-Ins (BADI)
The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called
Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods
as a function module with the same import and export parameters and follow the simple instructions below.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. HRPBSGB_HESA_NISR and press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_HRPBSGB_HESA_NISR
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. HRPBSGB_HESA_NISR) and double click on the method name
for example within HRPBSGB_HESA_NISR contract is a method
8. When changes have been made activate the implementation.
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
SEE THE LINKS REGARDING SPOT
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
Regards
Kiran Sure

Error while creating webservice from function module in ECC

Hi
while creating a web service out of a function module in ECC, in the configure service section we get a message saying ' Remember that the service does not have any runtime configuration and therefore cannot be used. Create the Web service configuration in the NetWeaver Admninistrator (transaction WSADMIN2).'
instead of check box 'release for runtime'.
Our ECC at release 7 patch level 22.
Checked in SCICM, SICF teh service and the folder are active.
Please suggest if we are missing on anything
Regards
Kumar

In new version on ECC, the runtime configurations needs to be performed in transaction SOAMANGER.
On executing the transaction, it opens a browser. The important configurations to be performed are:
1. Configure J2EE server and host. You can choose to provide the ECC server and host
2. Administration of the service in "Single Service Administration". The navigation path may differ depending of the ECC versions. But it is related to administration of the services.
Once done, check the WSDL generated.
Use this WSDL in the NWDS.
Regards,
Sharath

I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote co

I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote count. Is this possible?

I ended up reformating the drive as FAT32 because I still need to use it on my Windows 98SE system also. I did have a problem with the allocation size. I wanted to use 512 bytes but it kept failing so I used the default size(8192 bytes) and then it worked fine. I didn't think there would be a problem formatting as NTFS but since you are having problems I just tried it. It failed at 512 bytes allocation size so I tried again using 4096 bytes, the default, as the allocation size and it failed again. It looks like these drives will not format as NTFS.
Also, I think I figured out what's going on with the ReadyBoost problem. As I said initially it wouldn't work with ReadyBoost then after I had 12GB of data on the drive the ReadyBoost feature started working. After I deleted all the files it quit working again. After doing some reading on the net about Flash drives and ReadyBoost problems it appears that the memory chips on my Lenovo Flash drive are mixed with both fast memory chips that work fine with ReadyBoost and slower memory chips that are too slow for ReadyBoost. Apparently, after I fill up the portion of memory with data that uses the slow chip(s) then ReadyBoost works fine with the fast chip(s). I also verified the Flash drives read and write memory speeds using Vista's Event Viewer. To work with ReadyBoost the Flash drive has to read at a minimum of 2.5MB/s (for 4KB random reads) and write at a minimum of 1.75MB/s (for 512KB random writes).
Let me know what you find out.

Loading in a second Actions panel with the same functionality as the first, but independent from it

The actions panel is perfect at what it does; however, if you have a few action sets and, in order to eliminate scrolling, you need to expand them into a double row of buttons, it quickly becomes difficult to maintain. As soon as you delete an action or add an action to it, it disorders the others and you have to reorganize again, which becomes a vicious cycle. I like to keep things organised and neat with all that I do and pretty much the only way to have this feature is to expand it on the back end of the software or, if possible, create a script that loads a second Actions panel with the same functionality as the first but completely independent from it. I assume that the SDK will not allow us to expand on the software in this particular way, as Photoshop is not open source; however, maybe this suggestion will be taken into account for future updates or versions since I have yet to find a suitable way to do this.
Thank you in advance.
Kind regards

That would depend on the links on the page. Some pages have links that refer to different areas on the same page. If you want to force a link to open in a new tab, you can middle-click it.

Finding BADI in ECC 6.0

Dear All,
I need to find BADI's in any particular Transactions in ECC 6.0. I am familiar with Classic BADIs regarding
how to find them and implement them. However in ECC 6.0, badi calls are made through GET BADI and CALL BADI. Now, in order to find them, do we need to use any class or should we look for the strings GET BADI or CALL BADI in the program itself.
Any help would be appreciated.
p.s: Please advise on finding BADIs in ECC 6.0 only, i m familiar with finding classic badis through CL_exithandler.

dear pradeep,
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Go to the Transaction, for which we want to find the BADI,
Get the Program Name of Corresponding Transaction.
(Click on System->Status. Double Click on Program Name)
Once inside the program search for 'CL_EXITHANDLER=>GET_INSTANCE'.
Make sure the radio button "In main program" is checked.
A list of all the programs with call to the BADI's will be listed.
The export parameter 'EXIT_NAME' for the method GET_INSTANCE of class CL_EXITHANDLER will give you the BADI name for the Transaction.
Cheers
fareed

Obsolete function module in ECC 6.0 - BAPI_COSTESTIMATE_CREATE_SPLIT

Hi Guys,
The above function module obsoleted in ECC 6.0, I need related function module in ECC 6.0.
Could you please suggest me, which is the related function module in ECC 6.0?
Please take a high priority. Advance thanks guys.
Thanks,
Gourisankar.

Hello,
Take a look at class CL_GUI_FRONTEND_SERVICES.
Regards,
John.

Need to provide F4 functionality to customer field on SRM Screen

Hi all,
I was created 4 input fields on SRM WEB screen. I need to provide F4 functionality for the first field.if user clicks on the find button it has to show list of all values related to the above mentiones 4 fields. in this four fields one field is the key field. if user select on key field the corresponding values has to be populated in the reamining 3 fields along with the key field.
how to achive this. is there any badi for this.pls suggest me the sample code if any thing is there.

Hello,
If you are using custommer fields according to notes 672960 and 458591, the F4 option are self-generated when defining in the include (CI* or INCL_EEW_PD* ) a foreign key or a search help.
Rgds,
Pierre

NEED INFORMATION ABOUT "MAX_TEST" FUNCTION MODULE

HI ABAPERS,
I need information about "MAX_TEST" function module . this function module is used in 4.6 version , now system have been shifted to 6.0.....here in 6.0 version this function module is not prasent.can any one tell me which new function module we can use in place of this function module, without changing the functionality........
Thanks in advance
regards,
SUNIL

The module is not very sophisticated. Profficiency in Java or ABAP will be a great bonus here. There are plenty of good materials regarding XI on SDN. I suggest to start with step-by-step guides and master all basic integration scenarios
http://wiki.sdn.sap.com/wiki/display/XI/Step-by-Step+Guides
Opportunities in industry are not bad also, cause PI is rather popular among customers. The best thing is that it fits any type of customer's business. Integration is demanded almost everywhere.

Function Module - SAP ECC to BODS

Hi Experts - I have one function module in ECC system which is RFC enabeled and I have imported that in BODS.
Its showing me under function under ECC Data Store.
I am not able to drag it into normal data flow ,,,, Why ?
Is there any special data flow is required to use this.
I want to put the output of this function module in a flat file ? can i achieve this ? so function module to transform and then flat file.
Thanks
R

You need to call the function via a Schema Out function within a Query transform just like you would call a custom function, i.e. right-click in the Schema Out panel and select 'New Function Call' then in the function wizard you must select your ECC datastore from the 'Function Categories' list and then you should see your imported function on the right, then follow the wizard to define the input parameters and choose which output parameters you want output as colums in the query (and can then write to a flat file). Just be aware that if one of the output parameters is a table then you will need to unnest the table schema in a second query transform before wrtiting to the file. Oh and just use a 'Row_Generation' transformation to generate one dummy row as a source.

JNI : Two native libraries with the same functions

Hello,
I have two versions of the same native library like "abc_v1.sl" and "abc_v2.sl".
They have the same functions but they act differently.
I want to use both of them in parallel (each in its own thread) but only the functions of the first loaded library are being called.
Isn't there any possibility to load each native library in a different name space... maybe a different JVM?
Any help will be appriciated.
Thank you!

Isn't there any possibility to load each native library in a different name space... maybe a different JVM?Naturally if you have different processes (different VMs) then each can load a different version.
This might actually be easier to do. Especially if you think that you are going to be adding more versions. It would require that you implement a communication api from each of thes to your main application.
If you want to do it in in a single process then you have some work to do in C. It has nothing to do with java or JNI.
Basically you need to dynamically load each library and the create a thunk to each method you want to access. Where 'thunk' represents a dynamic descriptor that allows you to dynamically call the method.
What you are doing now is statically loading the libraries. So that won't work.
You can search on your platform/compiler for examples on how to do that.

Need to be same functionality badi in ECC 6.0 .

Similar Messages

Maybe you are looking for