Need to get the heart rate in run keeper without bying expense additional hardware
Hi,
I am using runkeeper to track my activities.
Till now, there is no compatible bluetooth device that can work directly with the iPhone in order to get the heart rate, this is very dispapointing.
Any project in progress on this point?
archman-cro wrote:Just a wild guess here: Try putting "resume=" in menu.lst as "by-uuid" like you have with the root partition.
Nope, that didn't help. now the dmesg related lines appear as:
TuxOnIce 3.2-rc1 (http://tuxonice.net)
TuxOnIce: Can't translate "/dev/disk/by-uuid/4564e7cd-aa5b-4b41-a7b5-20db4069bf1b" into a device id yet.
Also, that 6GB swap partition you got is a pure waste or resources. You need 3GB of swap max, and that is only if you want to store all your cache when you hibernate. If not, you don't even need a swap. If you're a normal user (means, you're not using some resource heavy apps, like those for editing HD vids or similar).
Sadly I realized that quite late Can't do a thing about it now.
Similar Messages
-
Need to get the row selected in table control without ay action
Dear Team,
I have a requirement in which I need to pass the row selected of a table control to a variable.
Here I need to get the row selected with out any other action
then the action of selection of a row.
Is it possible to read table control values using FM DYNP_VALUES_READ.
thanks in advance,
regards,
SaiHI,
Sai Kumar Potluri
I tried in IDES it working.
Here is the code.
REPORT ZPRA_TC_D.
TABLES : SCARR.
CONTROLS TC TYPE TABLEVIEW USING SCREEN 1.
DATA : SELLINE TYPE I,
SELINDEX TYPE I.
DATA : ACT LIKE SCARR-CARRID,
ANT LIKE SCARR-CARRNAME.
DATA : ITAB LIKE SCARR OCCURS 0 WITH HEADER LINE.
CALL SCREEN 1.
*& Module STATUS_0001 OUTPUT
* text
MODULE STATUS_0001 OUTPUT.
SET PF-STATUS 'ME'.
* SET TITLEBAR 'xxx'.
SELECT * FROM SCARR INTO TABLE ITAB.
ENDMODULE. " STATUS_0001 OUTPUT
*& Module MOV OUTPUT
* text
MODULE MOV OUTPUT.
MOVE-CORRESPONDING ITAB TO SCARR.
ENDMODULE. " MOV OUTPUT
*& Module USER_COMMAND_0001 INPUT
* text
MODULE USER_COMMAND_0001 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR 'UP' OR 'EXIT'.
LEAVE PROGRAM.
WHEN 'SEL'.
GET CURSOR FIELD SCARR-CARRID LINE SELLINE.
SELINDEX = TC-TOP_LINE + SELLINE - 1.
READ TABLE ITAB INDEX SELINDEX.
ACT = ITAB-CARRID.
ANT = ITAB-CARRNAME.
ENDCASE.
ENDMODULE. " USER_COMMAND_0001 INPUT
In Flow Logic.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
LOOP AT ITAB WITH CONTROL TC.
MODULE MOV.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB.
ENDLOOP.
MODULE USER_COMMAND_0001. -
The problems occurred after photoshop elements said I did not have the necessary permissions to save changes to a photo. I then allowed all to permissions to all disks, I have three external hard drives but I cannot restore from any as they all appear to have some kind of problem. I have repaired all disks in recovery mode and verified all inc mac hd. All permissions are repaired and all disks are saying repaired. So where do I go from here to get the mac back on running mavericks without loosing thousands of photos and all other data ?
Do I need to reinstall Mac OS ?
The only options I get to reinstall is mountain lion?.. I have been running the latest mavericks .?.
Do I reinstall and then update?
The external drives are not smart drives so how do I ensure I retain all my files?your best option is to connect an external drive and reinstall OS X on that external to run the system from. then copy all your files over to the new install for safe keeping. then try doing a reinstall of Mavericks over the top of the current install on the internal drive and test.
-
my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please
If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard. -
Getting the below error when running the Baseline.grf for the first time
I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
at org.jetel.graph.Phase.free(Phase.java:487)
at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
at org.jetel.component.RunGraph.execute(RunGraph.java:302)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
at org.jetel.component.RunGraph.execute(RunGraph.java:324)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com -
Need to get the Mail attachment name as it is to the receiver file adapter
I am doing a Mail to File scenario. I need to get the attachment from the mail and store it on the file server. I am using the PayloadSwap bean in the sender mail adapter. My requirement is to carry forward the attachement name as it is to the receiver file adapter side and store the file with the same name.
Did any one try doing this? I was looking at developing an adapter module but got struck as I could not find whether the attachement name is stored in the XI payload after it has got swapped using the swap bean.
Any help would be appreciated.
VJOops pressed the send key. Take two.
This is becoming a damn nightmare. When I run the adapter I am getting ModuleExceptions. Can you pass your eyes over these Java config settings to see what I am doing wrong. Using NWDS CE 7.1 with PI 7.1 both at SP07. All the imports were taken from PI 7.1 after SP07 was applied. The build id of NWDS is
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0001
Build id: 200901152336
APPLICATION.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
"http://java.sun.com/dtd/application_1_3.dtd">
<application>
<display-name>MailPOP_EAR</display-name>
<description>EAR description</description>
<module>
<ejb>MailPOP_EJB.jar</ejb>
</module>
</application>
APPLICATION-J2EE-ENGINE.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">engine.security.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">engine.j2ee14.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">com.sap.aii.af.svc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="interface">com.sap.aii.af.ifc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.lib.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.base.technology.facade</reference-target>
</reference>
<fail-over-enable mode="disable" />
</application-j2ee-engine>
EJB-J2EE-ENGINE.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-j2ee-engine SYSTEM "ejb-j2ee-engine.dtd">
<ejb-j2ee-engine>
<enterprise-beans>
<enterprise-bean>
<ejb-name>GetMailAttachment</ejb-name>
<jndi-name>GetMailAttachment</jndi-name>
<session-props/>
</enterprise-bean>
</enterprise-beans>
</ejb-j2ee-engine>
EJB-JAR.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<description>EJB JAR description</description>
<display-name>EJB JAR</display-name>
<enterprise-beans>
<session>
<ejb-name>GetMailAttachment</ejb-name>
<home>com.sap.aii.af.lib.mp.module.ModuleHome</home>
<remote>com.sap.aii.af.lib.mp.module.ModuleRemote</remote>
<local-home>com.sap.aii.af.lib.mp.module.ModuleLocalHome</local-home>
<local>com.sap.aii.af.lib.mp.module.ModuleLocal</local>
<ejb-class>sample.GetMailAttachment</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
SENDER MAIL ADAPTER modules
1 AF_Modules/PayloadSwapBean Local EB 1
2 GetMailAttachment Local EB 2
3 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local EB 3
1 swap.keyName payload-name
1 swap.keyValue MailAttachment-1
RECEIVER FILE MODULES
1 localejbs/AF_Modules/DynamicConfigurationBean Local Enterprise Bean 1
2 localejbs/CallSapAdapter Local Enterprise Bean 2
1 key.0 write http://sap.com/xi/XI/System/File FileName
1 value.0 message.interface
VARIABLE FILENAME SUBST WITH ASMA TURNED ON
fName message:interface_name
JAVA SOURCE
package sample;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.lib.mp.module.Module;
import com.sap.aii.af.lib.mp.module.ModuleContext;
import com.sap.aii.af.lib.mp.module.ModuleData;
import com.sap.aii.af.lib.mp.module.ModuleException;
import com.sap.engine.interfaces.messaging.api.Message;
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
import com.sap.engine.interfaces.messaging.api.TextPayload;
import com.sap.engine.interfaces.messaging.api.XMLPayload;
import com.sap.aii.af.service.cpa.Channel;
@ejbHome <{com.sap.aii.af.lib.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.lib.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.lib.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.lib.mp.module.ModuleRemote}>
@stateless
<code>GetMailAttachment</code>
@SuppressWarnings("unused")
public class GetMailAttachment implements SessionBean, Module {
private static final long serialVersionUID = 7612238514043673502L;
private SessionContext myContext;
private MessagePropertyKey myFileName;
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext context) {
myContext = context;
@throws CreateException
public void ejbCreate() throws CreateException {
public void getMessageProperty(MessagePropertyKey FileName) {
myFileName = FileName;
@param moduleContext
Contains data of the module processor that might be important
for the module implementation such as current channel ID
@param inputModuleData
Contains the input XI message as principal data plus eventual
set supplemental data
@return ModuleData Contains the (changed) output XI message. Might be the
response message if the module is the last in the chain.
@exception ModuleException
Describes the cause of the exception and indicates whether
an retry is sensible or not.
@SuppressWarnings("deprecation")
public ModuleData process(ModuleContext moduleContext,
ModuleData inputModuleData) throws ModuleException {
try {
Message msg = (Message) inputModuleData.getPrincipalData();
TextPayload payload = msg.getDocument();
String contentType = payload.getContentType();
// Content Type could be something like
// text/plain;charset="UTF-8";name="file.txt"
contentType = contentType.replaceAll("\"", "");
int i = contentType.lastIndexOf("=") + 1;
String fileName = contentType.substring(i);
msg.setMessageProperty(myFileName, fileName);
inputModuleData.setPrincipalData(msg);
} catch (Exception e) {
return inputModuleData;
JAVA ERRORS
2009-02-04 11:41:14 Information Mail: calling the module processor for channel LMK_Common_Mail_Sender
2009-02-04 11:41:14 Information Swap: swapping by payload-name ? MailAttachment-1
2009-02-04 11:41:14 Information Swap: successfully swapped
2009-02-04 11:41:14 Information Mail: message leaving the adapter (call)
2009-02-04 11:41:14 Information The application tries to send an XI message asynchronously using connection AFW.
2009-02-04 11:41:14 Information Backward validation is enabled
2009-02-04 11:41:14 Error Unable to validate the message with message ID 8702df71-f254-11dd-9b9b-001a64a73518
2009-02-04 11:41:14 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14 Error Mail: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14 Error Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException -
EXPECTED OUTPUT: here i need to get the count of 932 + 134 records = 1064
Hi Team,
could you pls suggest y iam getting wrong count.
select * from i_invoice_info_t_log_v invlog,invoice_header_t invhead
WHERE substr(invlog.tot_cust_no,1,7)=substr(invhead.acct_no,3,7)--------comparing tot_cust_no and acct_no for the other countries
and invhead.comp_code NOT in (2300) ----here when iam running this query i am getting the count of 932 records.
select * from i_invoice_info_t_log_v invlog,invoice_header_t invhead
where substr(invlog.tot_cust_no,3,7)=to_char(substr(invhead.acct_no,3,7))--------------comparing tot_cust_no and acct_no FOR THE COUNTRY 2300
and invhead.comp_code in (2300) ----Here when i am running this query i am getting the count of 134 records.
EXPECTED OUTPUT: here i need to get the count of 932 + 134 records = 1064 records.
I am using this query like below:
select * from i_invoice_info_t_log_v invlog,invoice_header_t invhead
where
(substr(invlog.tot_cust_no,1,7)=substr(invhead.acct_no,3,7)
and invhead.comp_code NOT in (2300)
OR
(substr(invlog.tot_cust_no,3,7)=to_char(substr(invhead.acct_no,3,7))
and invhead.comp_code in (2300)
)---------------------------------------------------here when i am running this query i am getting the count of 18381 records which is incorrect.
Expected output: i need to get the data for the comp_code which are not in 2300 and which are in 2300... bothselect *
from i_invoice_info_t_log_v invlog,
invoice_header_t invhead
WHERE (
substr(invlog.tot_cust_no,1,7) = substr(invhead.acct_no,3,7) --comparing tot_cust_no and acct_no for the other countries
and
invhead.comp_code NOT in (2300) --here when iam running this query i am getting the count of 932 records.
or (
substr(invlog.tot_cust_no,3,7) = to_char(substr(invhead.acct_no,3,7)) --comparing tot_cust_no and acct_no FOR THE COUNTRY 2300
and
invhead.comp_code in (2300) --Here when i am running this query i am getting the count of 134 records.
/SY. -
I need to get the cluster information using"MSCluster.Cluster" object
Hi,
Please anyone solve my problem ? I need to get the cluster information using"MSCluster.Cluster" object.
Set objCluster = CreateObject("MSCluster.Cluster")
objCluster .open <clustername>
If i run the vbscript " Microsoft VBScript runtime error: ActiveX component can't create object: 'MSCluster.Cluster' " error is thrown.
Kindly explain what is the issue and what can i do ?
-Sundar.this question was closed and answered a long time ago.
Post questions about WS2012 in th WS2012 forum.
The cluster object will no longer work in WS2012. Use the supplied CmdLets and utilities.
post future questions in the WS2012 forum.
¯\_(ツ)_/¯ -
TS1394 i have 10.5.8 and need to get the newest software but dont know how?
i have 10.5.8 and need to get the newest software but dont know how?
You need to buy a Mac OS X 10.6 DVD and then run Software Update. Some MacBook Pros can then be upgraded to 10.7 or 10.8.
(78121) -
Need to get the input dynamically and write the records
hi everyone,
iam having a doubt in scripts,
1.i need to get the input from user
(input is the table name)
2.if the input matches with the tables in the database and the n it has to write the records in a csv format.
3.the fields should be delimited by comma.
is it possible to write a script or procedure.
the script should be a generic one.
thanks and Regards,
R.Ratheeshhi
,,actually my column_names are.
select T24_ACCOUNT_NUMBER||','||
NULLIF(T24_CUSTOMER,NULL)||','||
NULLIF(T24_CATEGORY,NULL)||','||
NULLIF(T24_ACCOUNT_TITLE_1,'')||','||
NVL(T24_ACCOUNT_TITLE_2,'')||','||
NULLIF(T24_SHORT_TITLE,'')||','||
NULLIF(T24_SHORT_TITLE,'')||','||
NULLIF(T24_POSITION_TYPE,'')||','||
NULLIF(T24_CURRENCY,'')||','||
NULLIF(T24_LIMIT_REF,NULL)||','||
NULLIF(T24_ACCOUNT_OFFICER,NULL)||','||
NULLIF(T24_OTHER_OFFICER,NULL)||','||
NULLIF(T24_POSTING_RESTRICT,NULL)||','||
NULLIF(T24_RECONCILE_ACCT,'')||','||
NULLIF(T24_INTEREST_LIQU_ACCT,NULL)||','||
NULLIF(T24_INTEREST_COMP_ACCT,NULL)||','||
NULLIF(T24_INT_NO_BOOKING,'')||','||
NULLIF(T24_REFERAL_CODE,NULL)||','||
NULLIF(T24_WAIVE_LEDGER_FEE,'')||','||
NULLIF(T24_PASSBOOK,'')||','||
NVL(TO_CHAR(T24_OPENING_DATE,'YYYYMMDD'),'')||','||
NULLIF(T24_LIMK_TO_LIMIT,'')||','||
NULLIF(T24_CHARGE_ACCOUNT,NULL)||','||
NULLIF(T24_CHARGE_CCY,'')||','||
NULLIF(T24_INTEREST_CCY,'')||','||
NULLIF(T24_ALT_ACCT_IDa,NULL)||','||
NULLIF(T24_PREMIUM_TYPE,'')||','||
NULLIF(T24_PREMIUM_FREQ,'')||','||
NULLIF(T24_JOINT_HOLDER,NULL)||','||
NULLIF(T24_RELATION_CODE,NULL)||','||
NULLIF(T24_JOINT_NOTES,'')||','||
NULLIF(T24_ALLOW_NETTING,'')||','||
NULLIF(T24_LEDG_RECO_WITH,NULL)||','||
NULLIF(T24_STMT_RECO_WITH,NULL)||','||
NULLIF(T24_OUR_EXT_ACCT_NO,'')||','||
NULLIF(T24_RECO_TOLERANCE,NULL)||','||
NULLIF(T24_AUTO_PAY_ACCT,NULL)||','||
NULLIF(T24_ORIG_CCY_PAYMENT,'')||','||
NULLIF(T24_AUTO_REC_CCY,'')||','||
NULLIF(T24_DISPO_OFFICER,NULL)||','||
NULLIF(T24_DISPO_EXEMPT,'')||','||
NULLIF(T24_ICA_DISTRIB_RATIO,NULL)||','||
NULLIF(T24_LIQUIDATION_MODE,'')||','||
NULLIF(T24_INCOME_TAX_CALC,'')||','||
NULLIF(T24_SINGLE_LIMIT,'')||','||
NULLIF(T24_CONTINGENT_INT,'')||','||
NULLIF(T24_CREDIT_CHECK,'')||','||
NULLIF(T24_AVAILABLE_BAL_UPD,'')||','||
NULLIF(T24_CONSOLIDATE_ENT,'')||','||
NULLIF(T24_MAX_SUB_ACCOUNT,NULL)||','||
NULLIF(T24_MASTER_ACCOUNT,'')||','||
NULLIF(T24_FUND_ID,'') FROM T24_CACCOUNT;
this is the order
but while my output looks like
SQL> set serveroutput on
SQL> set verify off
SQL> set heading off
SQL> spool /emea/dbtest/tamdbin/bnk/bnk.run/DATA.BP/SAM_ACC.csv
SQL> exec input_table('T24_CACCOUNT');
declare cursor c2 is select
rownum||','||T24_WAIVE_LEDGER_FEE||','||T24_PASSBOOK||','||T24_OPENING_DATE||','
||T24_LIMK_TO_LIMIT||','||T24_CHARGE_ACCOUNT||','||T24_CHARGE_CCY||','||T24_INTE
REST_CCY||','||T24_ALT_ACCT_IDA||','||T24_PREMIUM_TYPE||','||T24_PREMIUM_FREQ||'
,'||T24_JOINT_HOLDER||','||T24_RELATION_CODE||','||T24_JOINT_NOTES||','||T24_ALL
OW_NETTING||','||T24_LEDG_RECO_WITH||','||T24_STMT_RECO_WITH||','||T24_OUR_EXT_A
CCT_NO||','||T24_RECO_TOLERANCE||','||T24_AUTO_PAY_ACCT||','||T24_ORIG_CCY_PAYME
NT||','||T24_AUTO_REC_CCY||','||T24_DISPO_OFFICER||','||T24_DISPO_EXEMPT||','||T
24_ICA_DISTRIB_RATIO||','||T24_LIQUIDATION_MODE||','||T24_INCOME_TAX_CALC||','||
T24_SINGLE_LIMIT||','||T24_CONTINGENT_INT||','||T24_CREDIT_CHECK||','||T24_AVAIL
ABLE_BAL_UPD||','||T24_CONSOLIDATE_ENT||','||T24_MAX_SUB_ACCOUNT||','||T24_MASTE
R_ACCOUNT||','||T24_FUND_ID||','||T24_ACCOUNT_NUMBER||','||T24_CUSTOMER||','||T2
4_CATEGORY||','||T24_ACCOUNT_TITLE_1||','||T24_ACCOUNT_TITLE_2||','||T24_SHORT_T
ITLE||','||T24_MNEMONIC||','||T24_POSITION_TYPE||','||T24_CURRENCY||','||T24_LIM
IT_REF||','||T24_ACCOUNT_OFFICER||','||T24_OTHER_OFFICER||','||T24_POSTING_RESTR
ICT||','||T24_RECONCILE_ACCT||','||T24_INTEREST_LIQU_ACCT||','||T24_INTEREST_COM
P_ACCT||','||T24_INT_NO_BOOKING||','||T24_REFERAL_CODE SRC from T24_CACCOUNT; r2
c2%rowtype; begin for r2 in c2 loop dbms_output.put_line(r2.SRC); end loop;
end;
1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222284001,2222222,6001,,,,,TR,USD,,,,,,,,
2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222384001,2222223,6001,,,,,TR,USD,,,,,,,,
3,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222484001,2222224,6001,,,,,TR,USD,,,,,,,,
4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222584001,2222225,6001,,,,,TR,USD,,,,,,,,
5,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222684001,2222226,6001,,,,,TR,USD,,,,,,,,
6,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222284001,2222222,6001,,,,,TR,USD,,,,,,,,
7,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222384001,2222223,6001,,,,,TR,USD,,,,,,,,
8,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222484001,2222224,6001,,,,,TR,USD,,,,,,,,
9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222584001,2222225,6001,,,,,TR,USD,,,,,,,,
10,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222684001,2222226,6001,,,,,TR,USD,,,,,,,
11,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222284001,2222222,6001,,,,,TR,USD,,,,,,,
12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222384001,2222223,6001,,,,,TR,USD,,,,,,,
13,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222484001,2222224,6001,,,,,TR,USD,,,,,,,
14,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222584001,2222225,6001,,,,,TR,USD,,,,,,,
15,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,222222684001,2222226,6001,,,,,TR,USD,,,,,,,
here if we look at the select statement the previous one ,its starts from middle and
picking up the records.i dont know y.and also its not writing the records in the path (spool)which i have given..can u pls check it out if possible.
thanks ,.
R.Ratheesh -
Calling the DTExec from Perl Script and need to get the Return Value (Sucess or Failure)
I am able to execute the SSIS Package from Perl Script using DTExec. But i need to get the return code of the SSIS Execution. Is their any option available to get the Success or Failure information from Perl ?
Exit codes returned from dtexec utility
When a package runs, dtexec can return an exit code. The exit code is used to populate the ERRORLEVEL variable, the value of which can then be tested in conditional statements or branching logic within a batch file. The following table lists
the values that the dtexec utility can set when exiting.
http://technet.microsoft.com/en-us/library/hh231187.aspx
There's a wrinkle if the package is running in the SSIS Catalog:
http://www.mattmasson.com/2012/02/exit-codes-dtexec-and-ssis-catalog/
David
David http://blogs.msdn.com/b/dbrowne/ -
How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.
How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.
Thanks for digging out the facts.
You have a 1st Generation Time Capsule.
Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability. -
Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas? -
How to get the frame rate of my application
Hi again...
How can I get the frame rate of my application?
I also want the frame rate value to be the title of the frame, updated every second. How do I do that?
thanks in advance...To get the path where your application has been installed you have to do the following:
have a class called "what_ever" in the folder.
then you do a litte:
String path=
what_ever.class.getRessource("what_ever.class").toString()
That get you a string like:
file:/C:/Program Files/Cool_program/what_ever.class
Then you process the result a little to remove anything you don't want:
path=path.substring(path.indexOf('/')+1),path.lastIndexOf('/'))
//Might be a little error here but you should find out //quickly if it's the case
And here you go, you have a nice
C:/Program Files/Cool_program
which is the path to your application.
Hooray -
I use symbolic links and program shortcuts as a way to easily open different Firefox profiles ie. one for casual/personal use and another for work. This works well, but I get the "Firefox is already running, but is not responding" error message if I try to open external links with FF as my default browser. FF is actually open and running fine, but I guess it doesn't acknowledge this fact because of how I'm originally starting the process.
I wasn't able to add the symbolically linked executables to the default program pane. Is there a way to bypass this error or other way to fix this?
The solution to the question linked below is what I'm using to open the different FF profiles.
http://superuser.com/questions/255312/pin-same-app-multiple-times-in-windows-7hello, this is probably happening when you run the default profile with the -no-remote switch.
http://kb.mozillazine.org/Profile_in_use
Maybe you are looking for
-
Why can't I read or write from my external hard drive?
Hey there, I recently borrowed my brother's laptop to use as a media station for listening to music from, and watching movies, in order to free up some space on my main macbook. In trying to migrate some files over, I discovered that my hard drive,
-
Anything like adobe acrobat 9 pro extended for mac?
Ready to switch to mac - buying on Friday - deal breaker though would be that there are no programs like acrobat 9 pro extended that can create pdf files from almost any video file... anything like that available on mac?? Thanks and I'm hoping the an
-
Can someone explain why one code works and the other one doesn't?
Hi, I have been doing a little work with XML today and I wrote the following code which did not function properly. In short, it was as if there were elements in the NodeList that disappeared after the initial call to NodeList.getElementsByTagName("sp
-
hi all, pls tell me what is sap dd and sapuu and what is use of it. thanks.
-
Does the X-FI I/O Drive work with the X-FI Extreme Gamer Card?
I have the basic card not the "Fatalitiy" model? Thanks. I need to know before I but the I/O Dri've.