Negative factor in Input_field_item on a web application
Hi,
I'm trying to work this out: Web planning application using "Input_field_item" as a factor for function to revaluate values.
Everything works fine, but only with positive numbers. If I try to use some negative, then I receive "Exception in BI runtime - the argument '1.00000-' is not a number"
Thank you for your suggestions
Standa
Solved. Was an bug untill SP11. Since BI SP12 its working.
Similar Messages
-
Web application startup - recommendations?
Hi,
If you were to start a hosted web application business (on a quite low budget), what would be your database setup?
Some requirements:
- suports up to 10.000 concurrent users
- there are not really very much transactions, more reads and quite heavy analytics (using materialized views)
- 24/7 is not required, but of course, there should be as little down time as possible
- there won't be very much data (err, no, I haven't done my homework yet), except attachments, which are most probably unpredictable anyway
I was thinking about just one server (I know, I know, ...), prefferably virtualized so it's possible to migrate to another server in case of hardware failure.
Base hw:
something 64 bit, probably at least 32 GB ram
1 Proc with as many cores as possible, so we can license just one socket (but should be expandable to 2)
Oracle / vmware virtualization? Should disk access be native or virtualized (I don't know Oracle vm, but vmware does support that)?
Disks:
probably very fast, right?
raid: hw or sw? mirror, 5?
Attachments should probaby get theri own (slower but bigger) raid. Maybe raid 5?
I think a pair of fast disks (scsi?) in raid 1 should be good enough for most tables...
Should materialized views get their own raid?
I know this is all very loose, but at this time it's all i know.
Thanks for any ideas.Jernej Kase wrote:
1 Proc with as many cores as possible, so we can license just one socket (but should be expandable to 2)That's not how Oracle counts CPUs:
"The number of required licenses shall be determined by multiplying the total
number of cores of the processor by a core processor licensing factor specified on
the Oracle Processor Core Factor Table which can be accessed at
http://oracle.com/contracts."
http://www.oracle.com/corporate/pricing/sig.pdf -
Problem with Configuring Tomcat for running jsp web applications..Plz HELP
I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Copyright 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Copyright 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine? -
Attempting to use SSL over RMI from a web application to a RMI server
Hi,
I am attempting to use SSL over RMI to a server. The client is the web
application that is hosted on WebLogic and that attempts to connect to the
server. There is no client or server verification at either the client or
the server end. The code works outside of WebLogic 7/8 but has the following
issues when running the web application inside weblogic:
java.rmi.ConnectException: Connection refused to host: gkhanna1; nested
exception is:
java.net.ConnectException: Connection refused: connect
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:350)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:137)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:124)
at java.net.Socket.<init>(Socket.java:268)
at java.net.Socket.<init>(Socket.java:95)
at
sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketF
actory.java:20)
at
sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketF
actory.java:115)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:494)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:169)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:313)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at java.rmi.Naming.lookup(Naming.java:79)
at
com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.initConnection(NTLMConne
ctionClient.java:59)
at
com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(NTLMConnectionC
lient.java:197)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at jsp_servlet._jsp._app1.__app1signin._jspService(__app1signin.java:133)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1058)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:401)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:445)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:306)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5445)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:780)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3105)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
The code at the client that initiates the connection:
socketFactory = (SSLSocketFactory) SSLSocketFactory.getDefault();
SSLSocket socket = (SSLSocket) socketFactory.createSocket(host, port);
socket.setEnabledCipherSuites(CIPHERS);
socket.setEnableSessionCreation(true);
Any ideas?
ThanksI don't see anything that indicates SSL was directly a factor in the
failure.
From the exception stack it looks like a more basic connectivity issue,
maybe the URL for the
RMI server is incorrect for some reason or the server was down.
It looks like you are doing something like this:
SSL client -> WLS server with servletA, servletA RMI client
(com.hyperion.css) -> RMI server
The connection failure appears to be the connection from servletA RMI client
to the RMI server.
Is that a correct picture?
Tony
"Gaurav Khanna" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am attempting to use SSL over RMI to a server. The client is the web
application that is hosted on WebLogic and that attempts to connect to the
server. There is no client or server verification at either the client or
the server end. The code works outside of WebLogic 7/8 but has thefollowing
issues when running the web application inside weblogic:
java.rmi.ConnectException: Connection refused to host: gkhanna1; nested
exception is:
java.net.ConnectException: Connection refused: connect
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:350)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:137)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:124)
at java.net.Socket.<init>(Socket.java:268)
at java.net.Socket.<init>(Socket.java:95)
at
sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketF
actory.java:20)
at
sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketF
actory.java:115)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:494)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:169)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:313)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at java.rmi.Naming.lookup(Naming.java:79)
at
com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.initConnection(NTLMConne
ctionClient.java:59)
at
com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(NTLMConnectionC
lient.java:197)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at jsp_servlet._jsp._app1.__app1signin._jspService(__app1signin.java:133)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1058)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:401)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:445)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:306)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5445)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:780)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3105)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
The code at the client that initiates the connection:
socketFactory = (SSLSocketFactory) SSLSocketFactory.getDefault();
SSLSocket socket = (SSLSocket) socketFactory.createSocket(host, port);
socket.setEnabledCipherSuites(CIPHERS);
socket.setEnableSessionCreation(true);
Any ideas?
Thanks -
Hello,
At present my SharePoint farm is having following domains:
1) Internal Domain - Domain1
2) External Trusted Domain - Domain2
And Following Intranet WebApplications having Windows Mode Authentication:
1) http://mywebapp1.Domain1.com - Single site collection
2) http://mywebapp2.Domain1.com - Multiple site collections
3) http://mywebapp3.Domain1.com - Multiple site collections
Both Domain1 and Domain2 users are able to access above web applications.
Now , we have requirement to add other trusted domains Domain3 , Domain4...etc. and create Extranet Application and I have following questions :
What kind of topology and Authentication is required ?
AD as User Identity storage location is better way for all other domains since there is trust ?
Do I need to just extend all the web applications in extra net zone and create site collection for different domains to isolate security and content as per the need ?
Is there any other best solution to implement extranet application under current environment ?
what kind of other factors are important to consider in order to create extranet application ?
Your help will be highly appreciated.
Thanks and Kind Regards,
Dipti ChhatrapatiHi Tom,
I have following information till now:
External domain will be trusted with parent domain where SharePoint is installed.
Authentication of external domain will be Windows Authentication.
User Identity storage location will be Active Directory of external domain.
Site to be accessed by external domain will be http://mywebapp1.Domain1.com
Now question is :
Should I assign external AD group ( Domain2ADGroups ) to SP Web Application http://mywebapp1.Domain1.com
OR
Should I extend the application in extranet zone for external domain and then assign permission to extended
application ?
I guess , if authentication is same then no need to extend the application - correct ?
Thank you to look at this thread !
Dipti Chhatrapati -
Adding a secure, internal-only SharePoint Web application / Site collection in existing farm
Hi,
We are currently working on creating a new internal-only SharePoint site that will host sensitive information. We are planning the architecture to provide a secure environment to host this information in SharePoint. We will create the new web app on a separate
database with encryption enabled TDE; we are also planning to encrypt the data through the SharePoint (Insert third-party vendor here) forms before it gets to the SP DB. And obviously, SharePoint permissions will be set accordingly.
Additionally, we would like to have the site accessible
only through our internal network and keep it off the DMZ.
Our current SharePoint environment consists of two web-front end servers (load-balanced) externally exposed (DMZ), one application server and the SQL server both behind the DMZ (internal-only). Currently all of our SharePoint web apps are accessible externally
through SSL.
What is the best way to accomodate this new internal-only web application within our existing farm providing the security measures explained before?
I am thinking on adding an extra WFE server to the existing farm and put it behind the DMZ (internal-only) in a similar way as our application server is configured right now, but just serving exclusively this new internal site's content. I would then
have the NEtwork guys to make the site accessible only to users logged-in internally in our network and through this new dedicated server only. My concern is that since all of our other web apps in the farm are exposed externally, and since the new server
would be part of the same farm, that could be open doors for bad guys to access this information. Are there any other topology options I should consider? I have thought about creating a small (one-server only) new farm just for this purpose, but I am trying
to avoid going that route.
Any thoughts?
Thank you,
RobYou're mostly going down the right track.
A new web application in dedicated SQL DB and web application policies to deny all external accounts access to the sites will go a long way. You can also make sure that the DNS does not resolve externally.
If you want security you will probably be building the web application on https alone, which is my preference for any farms these days. That might negate the need for your encrypted infopath system.
However you cannot add a WFE to a farm and dedicate a web app soley to that server. Any server with the SharePoint Foundation Web Application role will host all web applications. You can steer traffic to one
server or another but that's not really doing much for security. If it's on one WFE it's on them all. For that reason I would say that the standalone farm is the best, most secure, solution.
All of what you've been describing will help with security but you'll have to spend hours testing connections, securing files and testing testing testing. Whilst the standalone will just work.
No, i don't know why that turned into tiny print either. -
Design considerations while accessing data of a different web application
I am database developer for a web application (*WebApp1*) which supports around *6 million* merchant data across various tables in database (*DB1*).
The users for the above mentioned application are less, around *50* who monitor the 6 million merchant data.
Now a proposal has come up to develop a second web application for the merchants themselves.
Thus the user base for this web application (*WebApp2*) is in millions.
Now the requirement for WebApp2 is :
On each login of individual merchants, they need to see their individual data (mostly read-only) which is stored in (*DB1*)
along with other data which is stored in its own database (*DB2*). WebApp2 will have other functionalities too but those
are independent of WebApp1.
Now I can think of three approaches how to display DB1 data in WebApp2 :
1. Creating a stored procedure and accessing DB1 data through dblink. (*Cons* - have seen access through dblink is slower as it serializes access).
2. Replicate DB1 data to DB2 through batch jobs running every night. (*Cons* - Will store the same data in 2 places and will have the headache of data sync.)
3. WebApp1 will expose webservice using DB2 data, so that on each login, WebApp2 users use the webservice to display DB1 data through webservice.
(Please answer if there are any cons. beacuse of high user base ?)
Need your suggestion and views. Also if there are any other way please let me know.
Will it depend on any other factor ? Let me know if you need any further information.
Cheers !!!Ah - this is a much bigger question! And may be outside the scope of this forum to answer. I will have a go though.
The question really isn't can the database support 6,000,000 users. It is how many of the users will be making database requests at the same time, what is the average elapsed time of each request, and what do your users regard as an acceptable response time to each request?
To use a (very) simple analogy, my company employs 30,000 people but the IT Service Desk that they call if they have a problem with their PC is only staffed by 30 people. This is because the Service Desk Manager has estimated that at any one time only 1% of all employees will need to call the Service Desk. On average each call takes 6 minutes to resolve and the response time agreed with the business to a call is 1 hour. So within an hour one Service Desk technician can answer 10 calls in an hour, so 30 technician can answer 300 calls an hour.
Now you can apply this analogy to a computer system. The scalability of database systems is generally limited by the amount of available CPU. If we determine that the average database call uses 10ms of CPU, and the user will accept a response time of 1s, then each CPU can service 100 database calls within that response time. Multiply that by the number of available CPUs and you have a (very rough) idea of how far the database will scale. An server with 8 cores could support 800 concurrent requests. A cluster with 4 servers each with 8 cores could support 3200 concurrent requests.
I would stress that this is very crude. Much more information would be required to determine what the limits of database scalability were. My example does not take account of other source of potential latency, such as the network or the storage subsystem if requests involve significant physical I/O. Or indeed the latency in the application itself.
So, you need to answer these questions:
- How many concurrent database requests need to be supported
- What is the average amount of database CPU that each database request will consume
- What is the maximum acceptable elapsed time for each database request
On a more practical note, your application must use some form of connection pooling to limit the number of database connections required to service all the required database activity. You can scale the database horizontally using RAC and in extreme cases you can offload read activity entirely from the database using a middle-tier caching solution such a Coherence, GigaSpaces or GemFire.
That's probably enough for now. Any more and you'll probably need to get some consultancy! -
SC 3.2 Web application installation
Hi,
I have a SunCluster 3.2 installed on a host and it seems that the SC web application is not installed on this node....
How can I install this application?
Thanks for your helpHow do you tell that the web application - I assume you mean SunPlex/SunCluster manager - does not run?
If you have followed all the instruction steps, the necessary packets must be on your system. There is currently no way not to install them; you could just remove them after the install - which might have some negative consequences.
Did you try to connect to https://your_hostname:6789 ?
That should do the trick
Hartmut -
Error run web application designer 3.X
hello forum,
When I run the tool designer of the web application version 3.x.
jumps the following error:
Run-time error "75"
Path / file access error.
I have installed the patch:
gui710_7-10002995.exe: Patch Level 7 for SAP Logon.
bi710sp05_500-10004472.exe: BI Add-on 7.x, Support Package 5, Patch Level 5.
And he still does not work, you know if I need to install any more patch or perform some sort of setup?
A greeting and thanks.Hi,
You are talking in the query designer?
But that will only appear the result (with value) red or green or yellow, correct?
The idea is not to show the value, only the light.
Example:
I have the following:
Client|Value|
11 | 10eur
12 | 12eur
13 | -2eur|
The idea is to have the following:
Client|Alert|
11 | Green
12 | Green
13 | Red
Green to positive, red to negative, but only a light, no values displayed.
Thanks!
Edited by: Pedro Taveira on Nov 3, 2011 2:03 PM -
I have deployed 2 different web application on IIS 7.5 running on Windows Server 2008 R2 but on different port numbers i.e. one application deployed on port no. 1776 and another on 8091. I want to rewrite URL in such a way that if i hit any page of first
application such as default.aspx then it will be redirected to particular page of another application along with some changes in url.
Example: if i access any page from first application like:
http://g2wv126rbsc:1776/sites/main/commercial/commercial-solutions/financing/default1.aspx
then it should redirect to specific page of another application along with some changes in url:
http://g2wv126rbsc:8091/main/commercial/commercial-solutions/financing/default2.aspx
Note: In above mentioned url, also removed "sites".
I tried to create a inbound rule through URL Rewrite module (installed on IIS 7.5) by selecting Action as "Rewrite" but didn't find any success.
I need some examples if anyone has come across same kind of issue.
Thanks in advance.Please post ASP.NET questions in the ASP.NET forums (http://forums.asp.net ).
-
Problems access to a web application (Web Interface or Web report)
Hi,
We found problems with the access to web application. Some users have problems with direct links to the web applications(Web Interface or Web reporting), when they click on the link an error message appears, the message displays the following text:
"Cannot open file Bex?sap-language=ENbsplanguge=ENcmd=idoc_TE.."
Clicking in details the message is "No Access to specified file"
For this users the access to excel reporting is correct, the message appears when they click on the direct web links through the browser or directly in BW system, but if they type the URL they can access. Other users can use the direct web link without problems.
I highly appreciate any help or idea about how to solve this issue.
Thanks in advance.HI,
please ask to your basis that check the language of every single user on su01 tx.
This is the problem i think.
Natalia. -
How to configure request manager service for multiple website in one web application
I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
AwenThat's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx -
How can we remove javascript completly from J2EE based web application?
java script produce lots of problem in web application i just want to remove them comletly
rinku5259 wrote:
java script produce lots of problem in web application i just want to remove them comletly3 easy steps
1. using the mouse or keyboard, select the javascript code
2. press the delete button on the keyboard
3. save the file
do that for each file that has JavaScript in it -
Error while running web application through JDEV (10.1.3.0.3) in OC4J
Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: javax.xml.bind.JAXBContext
Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
Loader: oc4j:10.1.3
Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28 at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil.. -
Error while web application deployment in NetBeans5.5
Error while web application deployment in NetBeans5.5. I am always getting Tomcat deployment error. using Netbeans 5.5.1 with bundeld tomcat. But in some machines its working fine.
regards
jossy v joseWhat is the error message you see?
Are there any stacktraces or other relevant messages in the ide log file? (The ide log file is [userdir]/var/log/messages.log. On userdir: http://blogs.sun.com/karthikr/entry/jse_directories)
You can also check the server log file to see if there are more detailed messages.
You can also try setting ant's verbose level to debug or verbose (Tools | Options | Miscellaneous | Ant | Verbosity Level) and check the output.
Maybe you are looking for
-
Updated to iso7 and now credit card will not work with itunes account. What is going on?
When I updated to iso7 my credit card information for my iTunes account is no longer valid. Tried to update my credit card information and it will not allow my current and valid credit card to be used and will not accept any of my other valid credit
-
Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..
-
Performance Incentives for Sales personnel
Dear Experts, I am asked to capture the sales data of the sales personnel and give them the sales incentive as per the quantity of materials sold. The client has an existing third party software which is keeping track of the sales data,need to pull
-
Default databse with E-Business Suite 11.5.10.2 or the latest EBusiness
I would like to know the list of products bundled with the E-Business Suite latest version, especially the databse. Is it 91R2 or 10gR2. I need the default database as well as compatible version.
-
After doing a restart to resolve another issue I found all my PDF files in iBooks were deleted. This has happened before. Does anyone know why Apple hasn't resolved this issue?