NetBeans - Creating TreeNodes in design view

Not 100% sure if this is the right spot...
I've always enjoyed netbeans for creating Java applications not only for it's syntax highlighting, and auto-completion, but for it's design view. It's a lovely area where you can design the GUI instead of coding it, which makes the process of creating applications very easy.
My issue is that I need to create a tree. So I click on the Tree Swing component and place it in the page. Works fine, but now I need to add a tree model to it so that it actually works for how I want it to work. I've been told there's a treenode component somewhere (the GUI also hints toward it), but I can't find that. Can someone inform me where it is?

smarttart62 wrote:
Not 100% sure if this is the right spot...Nope. It's for questions about Java programming. If you want to ask questions about how to use Netbeans then a Netbeans forum would be better. Here's one that I found:
http://www.netbeans.org/community/lists/top.html

Similar Messages

Unable to create Tables in design view

One of the two problems I am having (the other will also be
posted) is that I am no longer able to use Design View to Insert
Tables at all - I get the following error message: (I made a
printscreen of the error but not sure how to embed the picture in
this post so here is the message verbatim).
"While executing objectTag, the following JavaScript error(s)
occured:
At line 26 of file "Macintosh HD:Applications:Macromedia
Dreaweaver 8:Configuration
bjects:Common:Table.htm":
Type Error: cmdDOM.parentWindow.createTableStr is not a
function"
I can create tables only if I type the html for them by hand
into the code pane. The file that the error message references does
exist, and appears to look fine (code-wise). I've also tried
uninstalling and reinstalling DW8, removing and recreating the
Configuration Folder as well as the site prefs and site definitions
- nothing has cured this problem.
I am using DW8 v. 8.0.2 on a Mac Quad G5 running OS X 10.4.6.
I am positive that I did not have this problem, or any of the other
current problems, with DW MX , and I installed DW8 as a stand-alone
app so that I could still use MX if needed. This and the other
problems don't occur with MX but I would really like to get them
solved because 8 offers other benefits that I want to be able to
use.
I'm wondering if anyone else has had this problem and managed
to find a fix for it.

One of the two problems I am having (the other will also be
posted) is that I am no longer able to use Design View to Insert
Tables at all - I get the following error message: (I made a
printscreen of the error but not sure how to embed the picture in
this post so here is the message verbatim).
"While executing objectTag, the following JavaScript error(s)
occured:
At line 26 of file "Macintosh HD:Applications:Macromedia
Dreaweaver 8:Configuration
bjects:Common:Table.htm":
Type Error: cmdDOM.parentWindow.createTableStr is not a
function"
I can create tables only if I type the html for them by hand
into the code pane. The file that the error message references does
exist, and appears to look fine (code-wise). I've also tried
uninstalling and reinstalling DW8, removing and recreating the
Configuration Folder as well as the site prefs and site definitions
- nothing has cured this problem.
I am using DW8 v. 8.0.2 on a Mac Quad G5 running OS X 10.4.6.
I am positive that I did not have this problem, or any of the other
current problems, with DW MX , and I installed DW8 as a stand-alone
app so that I could still use MX if needed. This and the other
problems don't occur with MX but I would really like to get them
solved because 8 offers other benefits that I want to be able to
use.
I'm wondering if anyone else has had this problem and managed
to find a fix for it.

Create a flex 'design view'

Hi
is it possible to create a page using flex 3 which is similar to the design view in the flex builder.
essentially what we are planning to do is that we want to provide the user an ability to design a page.
Does flex provide the users the design view as a component that can be used in a page.
av.

You just go thorugh following links where you will find what you want:
http://www.flashchemist.com/?p=123
http://flex.org/software/components
http://fleksray.org/adobe_flex_components_en.html#popuptoolbar
http://fleksray.org/adobe_flex_components_en.html#Auto%20Complete
http://flexsamples.blogspot.com/
http://weblogs.macromedia.com/pent/archives/flex_solutions/index.html
http://flex.org/showcase/
http://www.adobe.com/devnet/flex/?navID=samples
http://examples.adobe.com/flex2/inproduct/sdk/explorer/explorer.html
Thanks.

How-To/Sample code to tie up class variable to MXML component created in Design view

This is a very noob question but I've been searching through the documentation for the last 2 hours and can't seem to find anything helpful. I have a SWFLoader created in the design view. I have all my app code in an <fx:Script> with all my functions and variable in a CDATA tag. All I want to do is hookup the SWFLoader created in the design view with a private var in my ActionScript.
I also have two separate states for my app, and I want the same SWFLoader to be visible in both states. Can someone point me to some useful sample code or documentation??
Any help is much appreciated.

Sun has recommendations for naming conventions. Class names should start with a capital letter. You should avoid using class names that are the same as classes provided in the SDK. Following these conventions will make it easier for people to help you. For example, you should not use file, nor should you use File. It's better to use MyFile, replacing My with something that makes sense to your application (SeniorFile?).
Also, check the Formatting Help link when posting for a desciption on how to use the code tags for posting code.
1. You need to establish references between your classes. One way is to have a constructor that has a JMenuBar argument.
2. You can not add a file to a JMenuBar because a JMenuBar adds a JMenu. I don't think you want file to extend JMenu. It may be better for file to have a JMenu.
I haven't tried to compile this code so no guarantees - just trying to show you an approach.
public class Senior extends JFrame {
   public Senior() {
      JMenuBar bar = new JMenuBar();
      MyFile file = new MyFile(bar);
//whatever else you need
public class MyFile {
   public MyFile(JMenuBar mbar) {
      JMenu menu = new JMenu();
      mbar.add(menu);

Design view in SharePoint Designer 2013

This looks like a deal killer for me to move to SharePoint 2013 because the missing of design view in the new SharePoint Designer. Here is the way I do list development In SharePoint 2010:
(1)
Create and deploy a custom ui web part in Visual Studio.
(2)
Create additional “New”, “Edit” and “Display” list forms and set them as the default forms in SharePoint Designer.
(3)
Edit the new created forms in design view.
(4)
Locate and hide the original web part.
(5)
Insert my custom web part proper location.
Only code view is available in SharePoint Designer 2013, I do not know how to hide the default web part and insert my web part (which is deploy to the farm) in code. There are suggestions to use other edit tool to edit web pages. I am not sure
(1)
How to access these form/page in SharePoint.
(2)
How to insert SharePoint web part to the form/page.
I really appreciate if you can help me out.

Hi,
Base on the description, you created web part in Visual Studio and created forms using design view in SharePoint Designer 2010. Now you want to access the forms and insert the web part to SharePoint 2013 page.
By default in SharePoint Designer 2013, to add new forms, we can only custom forms in code view. For more information:
How to Create Custom Forms Using SharePoint Designer 2013:
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2012/09/20/how-to-create-custom-forms-using-sharepoint-designer-2013.aspx
To insert the web part, we can follow these steps:
Save this .webpart file to your computer.
Open the site in the browser, and go to the page on which you would like to place your web part. With the page in edit mode, click the Page tab, and the Insert tab. Click
Web Part.
On the left side, under the web part categories, click the
Browse… button under Upload a web part. Browse to that .webpart file you saved at step1.
Click Upload.
Click to insert a web part again, and then you’ll see it in the Imported Web Parts category. Click Add to add the web part to your page.
Best Regards,
Linda Li

Unable to see JSF pages in Design View after upgrade to Netbean 6.1

Hi:
I have a Sun Java Studio Creator Update 2 Project and I upgraded to Netbean 6.1 according to Sun's migration guide. It compiles and runs OK, but i can not see any page in design view at all.
Any one has any idea?
thanks

Hi Sriram,
I want to see commit stats on SM50 while background job runs. I unable to see on after upgrade.
all db stats are updated. On Sm50 screen unable to see Database commit count.
Cheers,
Harish

I have created numerous forms in Designer and for some reason, "Edit in Designer" from PDF, I cannot edit any of the fields in Design View.

I have created numerous forms in Designer and for some reason, "Edit in Designer" from PDF, I cannot edit any of the fields in Design View.

Is it possible you accidentally put the fields on the master page?

Using objects, design view in NetBeans

I started using NetBeans a few weeks ago, and I was wondering, if it's possible to visualize an object that you declared manually , in the design view?
For example, if I manually declare a jTextLabel, Can I see it , in the design view?
Because I haven't managed to find a way to do it.
Thanks for your attention.

zrkd51 wrote:
I started using NetBeans a few weeks ago, and I was wondering, if it's possible to visualize an object that you declared manually , in the design view?Your terminology is unclear. What does "object" mean in this sentence? The word "object" is not to be used in a blurry context in Java (which is an Object - Oriented programming language).
For example, if I manually declare a jTextLabel, Can I see it , in the design view?Because of the unclear terminology, your example is unclear too.
- Do you mean you have implemented a class JTextLabel, and you want to use it in the forms designer? Yes it's possible, you have to right-click on the class and "Add to beans palette", or something along those lines.
- Do you mean you have added an attribute of type JTextLabel (whatever that is, but maybe you meant JTextField )? Then no, NB will not show it in the forms designer, for the reason Kayaman said (except that in NetBeans, the metadata is stored in a separate +.form+ file, which is generated by the forms designer. Adding your attribute in the Java source does not propagate to the .forms file; and tweaking the .form file manually is something I'd clearly recommend against).
Note that this is merely a question for NetBeans forums, andsuch questions are generally frowned upon here (myself I don't frown, indeed I find it unfortunate that the NB forums are separate, and I find the NB forums unhelpful in general, but you can't tell until you try them).
Also note that nothing in your post suggests you read the NetBeans documentation. If you did, please state it, which chapters, and why it doesn't answer your question (the "Add from palette" thing is clearly in the docs).
Best regards,
J.

Create MetaData Tags in Design View?

Hi,
I can't find this anywhere in the Help files in Dreamweaver.
How do I enter MetaData tags for my web site in the Design
View?
Thanks!

There's an icon on the Insert>Common bar to add meta tags.
Also
Insert>HTML>Head Tags from the menu bar.
Alec
Adobe Community Expert

Visual design view in Studio Enterprise 8

I have recently discovered both Studio Enterprise 8 and Studio Creator, previous to which I was only using netbeans. However, I've been looking for a way to create either JSP applications or standar java applications with an IDE that has a visual design view in it.
Studio Creator has a visual design view only for JSP pages, but it does not seem to have the robustness of Studio Enterprise 8. Studio Enterprise 8 has a Palette tool, but for the life of me I cannot find the visual design view in it. Is there a way to activate a visual design view in Studio Enterprise 8? or, do I need to download an add-on?, or do I really need to create projects in Studio creator to later transfer only the JSP pages to Studio Enterprise?
Any help would be greatly appreaciated.
TGD

Besides the visual designer for JSP (Creator) , Swing GUI and UML (JSE8), what other types of visual designers are you expecting or wish for in JSE 8?

Design View blank, JSP and Java views fine

I'm running JSC 2.1, I have 2 gig of memory. I'm not able to see the design view on one of my jsps, but the error message in the log isn't very helpful.
I did a cut-and-paste from another jsp view in another file -- is there something else I have to copy? If so, what and where to?
Any help appreciated.
Stack trace is below (I get five of the same errors with different line numbers; I'm only including one stack trace here):
java.lang.NullPointerException
at com.sun.rave.designer.DesignerTopComp.componentShowing(DesignerTopComp.java:868)
at org.netbeans.core.multiview.MultiViewPeer.showCurrentElement(MultiViewPeer.java:233)
at org.netbeans.core.multiview.MultiViewPeer.showCurrentElement(MultiViewPeer.java:205)
at org.netbeans.core.multiview.MultiViewPeer$SelectionListener.selectionChanged(MultiViewPeer.java:480)
at org.netbeans.core.multiview.MultiViewModel.fireSelectionChanged(MultiViewModel.java:224)
at org.netbeans.core.multiview.MultiViewModel.setActiveDescription(MultiViewModel.java:93)
at org.netbeans.core.multiview.MultiViewModel$BtnGroup.setSelected(MultiViewModel.java:274)
at javax.swing.JToggleButton$ToggleButtonModel.setSelected(JToggleButton.java:215)
at javax.swing.ButtonGroup.setSelected(ButtonGroup.java:139)
at org.netbeans.core.multiview.MultiViewModel$BtnGroup.setSelected(MultiViewModel.java:270)
at javax.swing.JToggleButton$ToggleButtonModel.setSelected(JToggleButton.java:215)
at javax.swing.JToggleButton$ToggleButtonModel.setPressed(JToggleButton.java:250)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
[catch] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

I figured out the problem. The Java code had gotten out of sync with the jsp code, so the design view didn't know how to render the components. It's a pain to fix, but it can be done. Go through your jsp code component by component, and make sure there are declarations, getters, and setters for each id in the components. Also make sure the java code doesn't contain declarations, getters, and setters for any components that you didn't create (you can see these in the jsp view at the bottom of the file).

Can not see the design view nor the java file in CentOS

Hi all. I've recently installed JSC2 in CentOS. I find this tool really useful. But I have a problem with the design view and the java file view. At the beginning, when I first create a Page1.jsp, I can see the design view and the java view with no problem. I run apps correctly. But after a while, I get a "null pointer exception" error and I am able to see only the jsp view, not the others. I don't even have the option to see the Design and Java views. And the page icon in the project window appears to be darker than a well working page. I'm not really sure what sequence of actions I do to get this error, it just suddenly happens. What I've done so far in JSC2 is to link to pages in the Page Navigation view. It works fine for a while, but after a while I get the error I've described.

Yes, if I do that It happens the same. I've tried everything. Now I'm using Window$ 2000 and it works properly. Thanks anyway.

Images broken in design view on new computer paths leading to old harddrive?

I recently got a new imac and installed cs5 dreamweaver ( I was using dreamweaver 8 but it no longer works in mountain lion) . I redfined the site all was fine then I must have done something and now suddenly all my images are broken in design view and in brower and live view! The site shows the images online from the server but everything is broken in design view. The directory is a mess as I used way too may subfolders when I first did the site but it's too large to start over. I tried deleting the site from my harddrive all together and creating a new folder for it and just getting the entire site from the server but the images still don't show. I don't want to have to go to every page on the site and fix broken links! I can pull an image into a page by browsing to the folder on my harddrive but they are not appearing anymore on their own. If the images were uploaded originally from another computer and the folder being used now for the site on my harddrive is different that won't break the image paths will it? It all worked fine until a few days ago. What I don't understand is I thought the images wouldn't show if they were only on the server and not on my harddrive but since I just GOT the site from the server, all the images ARE now on my harddrive in the new folder so why still nothing showing? I I tried right clicking the broken images and showing design notes they seem to be lookin for a path to my old computer where the harddrive was named differently than it is now. Is there ANY way to fix this? What about renaming my harddrive to the old name?
Greatful for any advice but I am very much a newbie so not sure I will be able to do what I need to.
Mary Ann

Spaces in folder/filenames are not a good practice. Space are converted to %20 on the server. DW's Design View often can't reconcile this. Best advice is to remove the spaces and use underscores _ or hyphens -
Rename this:
http://www.thedqtimes.com/Jane_site/Lake%20Effects/lakeeffectsjdaughters.jpg
http://www.thedqtimes.com/Becky%20H%20stories/Untitled-1.jpg
To this:
http://www.thedqtimes.com/Jane_site/Lake_Effects/lakeeffectsjdaughters.jpg
http://www.thedqtimes.com/Becky_H_stories/Untitled-1.jpg
Also, you have a misplaced <head> tag. It needs to be above the Dynamic drive Javascript code.
<head>
<script> </script>
<style> <style>
</head>
Some pages are missing an HTML doc type declaration. This sends browsers into Quirks Mode.
Use validation tools to check for other code errors.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

How to add addtitional pages in design view?

How do I create additional pages in design view? I have tried using NEW PAGE AFTER, but that doesnt add another page in design view, like I need.
I am creating a report that uses 8 subreports per page to dynamically create labels. Currently I have a report header, and am using the page header to arrange the subreports so the top of each subreport prints on the top of each label. The fields in the subreports can grow, and fill in the label from the top down.
I need to create a multiple pages using this format, but I dont know how to add more pages in design view. Essentially I need subreports 1-8 on page 1, 9-16 on page 2, etc. I would like to preserve the formatting I have created thus far, but I can always change it if I have to.

In attempting to create the label sheets I needed, I ended up creating 14 separate reports (which report on 6 individual queries), because there are 14 pages worth of labels that need to be created. What I wish to accomplish is to condense these 14 reports down to 6 reports. One for each query. What I absolutely cant find a way to do, is to get Crystal Reports to allow me to customize subreports on consecutive pages. Again, I have 8 subreports on each page, which have been formatted to fit on 8 labels when printed. Each subreport is identical in design, but has a different range selected (i.e. my driving value in each subreport has been modified with Select Expert to be between 1 and 5, or 6 and 10, or 11 and 15). This is how I have been able to return 5 consecutive results on each label, with the next label returning the following 5 results.
My ultimate question: Is it possible to create a multi-page report using this method?

How come I can see my div in design view but not in live view

Hi,
I have a div ID called "portfolio" that I can see in design view but not live view or on a browser. It's a little pink square and I want that square round also.
I ran it through validator. It picked up some things in the style.css which I changed and the boilerplate.css that I did not. Because I thought DW auto creates code for boilerplate because I don't enter that code myself.
It's also rejecting a lot of webkit code but this seems like standard webkit code that works elsewhere on the page.
BTW: at what point does this brutal hand coding pay off in money and less heartache when Wordpress looks cleaner and is so much easier to use? I feel like I barely know HTML or CSS in terms of translating vision to reality and with all-browser functionality after months and months of on-line classes. How long are the pros at it till they reach a watershed point?
here's my address: http://www.adjacentdimensionsmedia.com/home.html
Here's my html:
<body>
<div class="gridContainer clearfix">
    <div id="div1" class="fluid"><img src="adtitle2.png" width="700" height="80" alt=""/></div>
<div class="fluid"><div class="box-shad"><a href="index.html"></a></div>
</div>
    <div id="portfolio">Portfolio</div>
</body>
Here's my CSS:
.box-shad {
margin-top: 200px;
margin-left: 100px;
width: 900px;
height: 700px;
display: block;
background-image: url("images/Big-tree-trans1.png");
background-size: 900px 700px;
-webkit-box-shadow: 15px 15px 15px #000000 inset;
box-shadow: 15px 15px 15px #000000 inset;
-webkit-border-radius: 50%;
border-radius: 50%;
position: fixed;
.box-shad a {
    display:block;
    width:900px;
    height:700px;
#portfolio {
width: 100px;
height: 100px;
margin-top: 0px;
margin-right: 200px;
margin-left: 200px;
margin-bottom: 0px;
border-radius: 75%;
-webkit-border-radius: 75% 75%;
background: pink;
top: -300px;
position: relative;

The top:-300 is putting that div above the top of the browser viewport. Fix that and you'll see the div.

NetBeans - Creating TreeNodes in design view

Similar Messages

Maybe you are looking for