NetBoot appears in startup disks but clients will not boot to the images

I recently upgraded a 10.6.8 server to 10.7.4 server. I did a clean update but saved all the needed information off of it.
The problem I am having is with Netboot. I have the service enabled and the images are in place again. These are the same images from the old server, so I know they worked at one point in time.
Now I can goto the Startup Disk option and see the disks there, but when I try to Netboot I just get the folder with the question mark.
This is in a school so we do have multiple subnets, however the IP address on the server remained the same, so the helper addresses are still working.
I have tried to create a new netboot image, but I am new to all of this and it didn't work (I blame me not knowing how to make one, so yeah).
I am currently trying to use Deployment Studio (as was suggested here https://discussions.apple.com/thread/3962094?start=0&tstart=0), but I really think there is something wrong with my set up of the server and not the images.
Any help is greatly apprecaited.
Thank you,
Keegan

It is possible that one of underlying services required isn't running or configured properly. Here's a little script I wrote to help diagnose issues like this.
If the output doesn't help you figure it out on your own, paste it back into this thread.
-Brian
#!/bin/sh
# netboot_service_states.sh
httpNetBootPath="/Library/Server/Web/Data/Sites/Default/NetBoot"
nfsExportsPath="/etc/exports"
tftpNetBootPath="/private/tftpboot/NetBoot"
serviceDataPath="/Library/Server/NetInstall"
savedClientsPath="${serviceDataPath}/ClientData"
savedImagesPath="${serviceDataPath}/ImageData"
# Dump state pertaining to the bootp service
isRunning=`sudo launchctl list | grep bootpd`
serviceState="enabled"
if [ "${isRunning}" == "" ]; then
          serviceState="disabled"
fi
echo "bootp service is ${serviceState}\n"
# Dump state pertaining to the TFTP service
isRunning=`sudo launchctl list | grep tftp`
serviceState="enabled"
if [ "${isRunning}" == "" ]; then
          serviceState="disabled"
fi
echo "TFTP service is ${serviceState}"
echo "TFTP Service data folder"
if [ -d "${tftpNetBootPath}" ]; then
          ls -lsa "${tftpNetBootPath}"
fi
# Dump state pertaining to the HTTP service
echo "\nHTTP service data folder"
if [ -d "${httpNetBootPath}" ]; then
          ls -lsa "${httpNetBootPath}"
fi
# Dump state pertaining to the NFS service
echo ""
nfsd status
if [ -e "${nfsExportsPath}" ]; then
          echo "Contents of ${nfsExportsPath} is:"
          cat "${nfsExportsPath}"
fi
# Dump state pertaining to the re-promotion data cache
if [ -e "${savedClientsPath}" ]; then
          echo "\nSaved client share points"
          cat "${savedClientsPath}"
fi
if [ -e "${savedImagesPath}" ]; then
          echo "\nSaved image share points"
          cat "${savedImagesPath}"
fi

Similar Messages

  • Help needed on startup. My computer will not boot from the CD drive!!!

    Problem with iMac G3 333, the Message on the screen states: "The System Software on the starup disk only functions on the media, not if copied to another drive." Like a fool, I copied the system folder from the original system software 9.2.2 on to the iMac. System disk which is not a complete system folder when used on the computer. I have searched the Internet, but can not find an answer. I have tried everything, holding down the C key, "Delete, Opition, Apple key, shift" holding the mouse down on startup, various combinations of other keys, etc. The CD starts to spin, but the computer switches to the hard drive and the message above returns. No matter what I try I still can't boot from the tray loading CD drive. Is there any Firmware code that I can use. I know how to access Firmware on the Imac and can boot the iMac using Firmware, but I don't know how to use Firmware to boot the CD drive which I need to do so I can reload the original software. CAN SOMEONE PLEASE HELP? Thanks, Jim

    Yes, I have tried both System Softwares a number of times. The C key will not boot up the CD drive and the harddrive always boots with the original message. I need to get the CD drive to boot so I can reloaded tge original software. Do you know anything about booting the CD drive using Firmware? Jim

  • I want to wipe iBook of it's content, but it will not boot up from DVD

    Can someone tell me how I clear off the content of iBook and install the basic set of the applications? I have the original OS 9 disks but they will not boot up with these. I have gradually upgraded the OS so I don't have disks to match 10.4.11.
    I want to give this away, as I bought new MacBook Pro recently and I have all of the files on the new computer, (and on another hard drive).
    Thank you for any help from out there.

    No problem; I usually answer good questions already solved. (It's for the search engine.) Here's how to wipe a corporate or government ATA hard drive.
    Should you be concerned about spies, industrial and foreign, or even you own personal information, there is a standard method of erasing ATA disks that contain government classified information. Most ATA disks have it built in (and is a concern when purchasing computers for classified research). It's extreme, but sometimes necessary: information otherwise remains stored on 'bad' blocks, &c.
    At one time, only the DOS program HDDerase activated the secure erase in ROM. For Mac users, the Linux program 'hdparm' (which has other uses) will do this from a Live Linux distribution on CD (unless you can boot a USB Flash Drive).'Darwin' might have it.
    How to Nuke an ATA Hard Drive
    http://ata.wiki.kernel.org/index.php/ATASecureErase
    Note that, if you stop the process part way though, the disk may not be usable again (except to spies). Also, nothing is guaranteed.
    If Darwin doesn't have it, or if it doesn't work, LiveCD distributions, such as Mint, Berry, & those of major distributions can be found here:
    Linux Release Watch
    http://distrowatch.com/

  • HT4623 I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working f

    I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working fine.

    Have you tried the following troubleshooting document?
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    If you end up using the If the iTunes Store opens successfully section of the document, and the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.

  • My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

    My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

    I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.

  • I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

    I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
    Can this be done
    Thanks for any and all help

    The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
    The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
    While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
    Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
    If you want to learn more about Time Machine, Pondini is an excellent resource.

  • My macbook pro is connected to wifi but it will not connect to the internet.

    My macbook pro is connected to wifi but it will not connect to the internet. When I go on safari, it says that "Safari can't verify the identity of the website". Then I tried to update flashplayer but you need the internet to update it. All this only started happening after that Moutain Lion software was downloaded onto the laptop. Please help, I have been internet-less for a couple months now.

    Hi rynhelp,
    If you are not able to connect to the internet after installing Mountain Lion, see this article for information on how to start troubleshooting:
    OS X Mountain Lion: Use Network Diagnostics
    http://support.apple.com/kb/PH10984
    You may find additional troubleshooting information in this article useful:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    It is written for Lion but works for Mountain Lion as well.
    Cheers,
    - Ari

  • I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password

    I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password

    This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
    Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved.

  • I purchased a book, payed for it but it will not play despite the cover page showing up in ITunes books.

    I purchased a book, payed for it but it will not play despite the cover page showing up in ITunes books.

    Did you accidentally buy an ibook?
    If so, these are print books that you read on your iphone/ipod touc/ipad.

  • I successfully downloaded Lightroom CC. everything looks good, but it will not open. The circle spins about 2 times and then it just stops and I get nothing. I uninstalled and restarted my computer. I downloaded again. Same problem

    I successfully downloaded Lightroom CC. everything looks good, but it will not open. The circle spins about 2 times and then it just stops and I get nothing. I uninstalled and restarted my computer. I downloaded again. Same problem

    Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • TS1702 I lost the Icons from my 4s 6.1.2 IOS I can see them in Itunes but they will not restore to the Phone

    I lost the Icons from my 4s 6.1.2 IOS I can see them in Itunes but they will not restore to the Phone

    What icons are you talking about?
    Are you talking about apps that you've downloaded?  if so just sync them back to your phone using iTunes.

  • I'm trying to add album art to a CD I imported but it will not work. The album art will add to other albums but it won't show on the album. The CD is imported from Japan, didn't think that would be a problem. Does anyone know a solution?

    I'm trying to add album art to a CD I imported but it will not work. The album art will add to other albums but it won't show on the album. The CD is imported from Japan, didn't think that would be a problem. Does anyone know a solution?

    Vanguard,
    You are welcome.  As I gather you have now figured out, any of the other formats (AAC, MP3, AIFF, or Apple Lossless) can handle artwork just fine.
    Enjoy the music!
    Ed

  • I have LastPass running on a desktop PC. I just bought a new Laptop, Win 7, I can open the Vault on the laptop, but it will not auto fill the site logins Firefox is running on both computers.both

    I have LastPass running on a desktop PC. I just bought a new Laptop, Win 7, I can open the Vault on the laptop, but it will not auto fill the site logins Firefox is running on both computers

    Hi,
    Please try this: Firefox '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions''' (on the left), click '''Options''' for LastPass > '''General''', enable '''Automatically Fill Login Information'''. If a site has more than one entries, you can set the preferred login in the vault by right-clicking the preferred entry > '''Edit''' and enable '''AutoLogin'''.
    [https://lastpass.com/support.php LastPass support]

  • Optical drive trashed and MB Pro will not boot from USB image

    Hello,
    New here but I have searched and tried all I know to get this MBP working right again. My disk drive is trashed and has been for some time now, this is why I have a bootable version of Snow Leopard on an 8G flash drive. When my MBP began acting funny recently and I went to disk utility to verify permissions and the disk. Both failed = must boot from disk to repair, thus my issue. For some reason by MBP will not boot from the usb image I have used previously??? Pressing C or Option during startup does not work. If I press Option, I only get the harddrive option, C yields nothing and the computer boots normally.
    Please!! let me know how / what you would do to resolve this. I don't understand why I have previously been able to boot from this same file on the same drive previously to repair my disk / permissions but cannot do so now. FWIW, I tried placing the file (OSX) on my external HDD to boot from, this did not work either (USB HDD).
    Thank you in advance for your input!!

    It isn't clear what you mean about your HD being trashed or which disk (HD or USB drive) you are trying to repair, but either way you need to start up from your Snow Leopard installer DVD & instead of installing anything go to the Utilities menu & run Disk Utility from there to repair either or both of the disks.

  • My iMac will not boot past the logo and spinning gear

    My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

    If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
    That article states:
    Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
    Would I see the recovery menu (by holding down option on power up)
    Yes.
    if there was no recovery disc connected do you think?
    Shouldn't matter, since your int HD is always connected.

Maybe you are looking for

  • Can't Add to iPhoto from Mail - function in Mail.app broken?

    I did try several Emails with different .jpg images attached, the option "Add to iPhoto" is visible in the pulldown menue (click "Safe" next to Quick Look), one can select it, but nothing happens. No difference if iPhoto is open or not. I did do a pe

  • Out of Order Coverflow

    Ok, so on my 8g ipod nano(3g), some albums in coverflow appear at the very end of all the albums. Like Bob Dylan appears behind Wolfmother. But its only certain albums, and its the same ones every time. Help? P.S. I've posted this on other forums (cn

  • 6.1.3 update....i phone 5 present problems after installing

    after installing ios 6.1.3 i face many problems.one of them is that during the calls after 5 or 6 minutes the phone close and it writes recalling. when i use some applications like facebook or games suddenly it stops working and i am out of the appli

  • HT4557 iPod is not an option in settings

    We're trying connect our iPad to apple tv but it's not working. No "iPod" option in settings. Please help!

  • Two Extractor logics for full and delta?

    Hi, I have a situation where in the logics for full upload and delta uploads are drastically dfifferent! What is best way to deal it? shuould i have two different extractors for full and delta ? Raj