Netflow is displaying inbound data only, but not outbound

We use NetQos to monitor our Netflows. Some tunnels at our remote site show both inbound and outbound netflow data, yet some tunnels only show inbound.  The sh run confirms that both tunnels are set up in equivilant manner i.e. "ip flow ingress", "ip flow egress", and "ip route-cache flow".  The NetQos tool looks accurate, what am I missing?   jimmyc

hi Jeff,
Check if the alerts are raised properly, just to reassure check the table /sapapo/am_alert has the alerts you have generated. I suggest delete all alerts & check teh table has zero entries & then generate new alerts. Then try to display, if it does not appear please check if there is any system dump in ST22. While displaying alerts in alert monitor if there is a system dump (for soem reason) you dont get a dump screen, instead you get zero alerts.
I am not sure if you are using any user exit for the alert display, if yes please check them too.
Regards,
Vasu

Similar Messages

  • HT204053 I have two apple ID's and it's causing problems in my contacts. It repeats the same address and sometimes displays email address only but not the full contact details? How do I get my contact list the same in all my devices (iMac, iPhone & iPad (

    I have two Apple ID's and it's casing problems on my contact list as it repeats the address in somecases and in others it only displays email address for a contact. I want to have the same contact list and details on all my devices (iMac, iPhone 4S & iPad Mini)? Is it possible?

    By using 1 of the 2 ID's instead of both, choose one, move everything in the other one to the one you chose and stop using it.

  • I have home sharing on but can't see my library on the computers icon. iTunes does display my purchased tunes but not my own imports.

    I have home sharing on in iTunes but can't see my library when I use the computers icon on Apple TV. iTunes does display my purchased tunes but not my own imports.
    I can play my own tunes by selecting them on my iMAC and directing them to Apple TV. I think that I should be able to see my entire library on Apple TV shouldn't I?
    Am up-to-date with iTunes and using Mavericks OS. I am connecting to Apple TV with an Airport Extreme 802.11n Wi-FI and a brand new Apple TV.
    Thanks for any comments,
    Roger

    Okay, so HomeSharing is not working.  Most likely due to a network issue.
    Is the ATV and computer running iTunes actually on the same network?  Many new routers create seperate networks for the wired and wireless portions of the local network.

  • Display the date witch is not exist in my table

    Dear Sir
    I want to get the date which is not exist in this field C_DATE, when I compare between tow date, that is I let user enter from_date and to_date ,to get the date which is not exist in the CHEMICAL_CONSUMPTION table ,
    And my table structure as the flowing:
    SQL> DESC CHEMICAL_CONSUMPTION
    Name Null? Type
    C_DATE DATE
    C_JOB_NO NUMBER(8)
    C_BLOCK_TYPE VARCHAR2(10)
    C_COLOR_TYPE VARCHAR2(10)
    C_RUN_TIME NUMBER(6,2)
    C_OPER_CODE VARCHAR2(10)
    REMARKS VARCHAR2(450)
    C_YEAR NUMBER(4)
    C_DAY_REMARKS VARCHAR2(2000)
    ORDER_CODE NUMBER(12)
    RRQ_DOC_CODE NUMBER(12)
    Can I compare this table with the dual table to display the date witch is not in CHEMICAL_CONSUMPTION .
    Waiting for your valuable answer with example
    Best regards
    Jamil Alshaibani

    something like
    SELECT *
      FROM CHEMICAL_CONSUMPTION
    WHERE C_DATE BETWEEN (:BLOCK.FROMDATE AND :BLOCK.TODATE)
        OR C_DATE IS NULL;Just a guess.

  • After stopping FF when I restart it , I get a pop up displaying Firefox already running but not responding. Please Help?

    After stopping FF when I restart it , I get a pop up displaying Firefox already running but not responding. Please Help?

    There are several possible causes, see [[Firefox is already running but is not responding]].

  • PSA request updated to data targets but not showing

    Hi All,
    It must be a basic question for BW support activities. However appreciate if someone can help me out as I am unable to find similar post.
    In PSA the request shows it successfully updated to a data target but I can't see the delta request in the data target (Cube)- Manage.
    This is a delta request. Can someone tell me how do I load the data back in to the cube? Do I need to delete the request from cube and run it again but I guess the deltas will be lost.
    Help. pls give me all the steps in detail how do I fix this.
    Thanks,
    B

    Hi,
    There are two options.
    1. at PSA find how many records are exist for your request.
    Note/down load the records into excel if you have countable. As my guess delta records might be less.
    Later thru repair full request you can load to PSA and then to target.
    AT repair full request we need to use proper selections to load required records only.
    2. PSA Request must be stored at back end table.
    in that table if we can change update further status then we can do the psa request to target thru delta dtp.
    Thanks

  • Export report Excel-Data Only works not,'not enough memory for operation'

    Hi all,
    we are using in our Software CrystalReport Version 11 Service Pack 5. Crystal report is intergated for .NET. We can not uninstall CrystalReport Version 11 Service Pack 5 to install another Version or another Service Pack.
    We are haveing problems to export report as Excel 97-2000 Data Only, "not enough memory for operation" message pop up after you try to export report as Excel data Only.
    Export Report as PDF is working fine.
    This problems are on Windows XP Sp3 and Vista. On Windows 7 we have no problem.
    Please, can somebody help me solving this problem, or to finde a workaround for Windows XP. Memory from PC is not the problem.
    Mit freundlichen Grüßen / Kind regards
    Odisej Nujiq

    Odisej, unfortunately, processes such as remote sessions are reserved for phone cases only. You can create a phone case here;
    http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
    Also, just as an FYI, see the blog [What are these 'support' forums good for anyhow?|/people/ludek.uher/blog/2011/04/07/what-are-these-support-forums-good-for-anyhow]
    Without phone support, you are left to do most of the foot work your self. On the forums, we can provide suggestions and guidance, but that is about it.
    Couple of things to note though. If you do create a phone case, one of the 1st things that you will be asked is to update your app to SP6 - unless you can prove the same issue exists with SP6 (see more bellow).
    Something I would recommend you try is to take an XP box, install SP6 on it, then install your app on it. If this works, your options are highly limited. E.g.; SP6...
    One other utility that may be worthwhile to use is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx]. Run that on the XP box. In the logs, look for "Access Denied" error messages. Look for load or other issues with crxf_xls.dll, exportmodeller.dll and crtslv.dll.
    From your responses I am still not sure if you actually did run Modules and compared the results. This is much, much easier to do than working with ProcMon and I'd start there. To summarize, my troubleshooting plan (irrespective of the limits imposed on you) would be:
    1) Use Modules as this is the easiest thing you can do
    2) Try this with SP6 - more work that (1) above, but at least you are on the latest. If this works, banging your head into an SP5 wall will do you no good (like I said, irrespective of what ever limits...)
    3) Use ProcMon - not too difficult, but time consuming as you will be looking over 100s, possibly 1000s of lines and not being familiar with details of CR, this will take time.
    - Ludek

  • Use data only, but block voice calling

    On an upcoming trip to Europe, I'd like to buy the 100MB data plan for $25 and use it to text via a texting app, but I don't want or need to make or receive calls.  How do I turn on 4g only, but block all calls? 
    At my accommodations I will use their wireless internet, but would like to use mobile data when I'm out and about.
    Thanks in advance for any help or advice.

        midwest-meemaw I hope that you have an amazing time! There isn't a setting that will allow you to block calls and still use the network for data. However as long as you don't make/answer the calls, then you will not be charged airtime.
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • Master Data Loaded but not able to see.

    Loaded master data successfully. Able to see it in P and M table, but not able to see when going thru Manage - Contents at InfoProvider level.
    Many requests are available showing number of records Transferred and Updated.
    What could be the possible reason?

    Hi Sarabjit,
    Welcome to SDN!!
    You need to load the transaction data into the Info-provider to see the contents and not just the master data.
    In case you have done the transaction load then you need to do the "apply hier/attr change" for the master data loaded. Goto RSA1 -> Tools(menu) -> apply hier/attr change -> Seelect your info-object and execute.
    Bye
    Dinesh

  • Wireless video link example works with antenna only but not with SMA to SMA cable

    I am trying to run wireless video link example https://decibel.ni.com/content/docs/DOC-22728 . It works fine if I use install antennas on my Tx and Rx USRPs. But it does not work if I use SMA to SMA cable to connect Tx and Rx USRPs. Can somebody guide me what is the reason why it is only workng with antennas but not with SMA to SMA cable. 
    Thanks 
    JK

    I connect the 30 dB attenuator at RF input port of Rx USRP. But it does not work completely.
    Without connecting attenuator i was not able to receive any thing on my Rx VI although it shows waveform. But after connecting attenuator receiver some times receive text messages and some times not. Also it does not work at all for images and for video it works partially but gives some error related to memory full after few mins.
    I want to know why this example works completely without any problem if I use antennas, and why it does not work perfectly if i use sma to sma cable for connecting transmit and receive usrps.
    Please guide
    Thanks 
    JK

  • On nView titlebar, clicking "Move to next display", The resizes bigger, but not smaller.

    Hello and TIA for your help.
    Environment:
    Lenovo T61 laptop (model 6457-Z4U) set to 1680x1050
    Internal video controller: NVIDIA Quadro NVS 140M
    External monitor: Samsung Syncmaster 940BF set to 1280x1024
    Win XP SP2
    Problem: I am using the nView Desktop Manager and nView Control Panel. On the nView titlebar on the laptop, when I click the "Move to next display" button, then the window does move to the external monitor, and sizes the window to 1280x1024 to fill the screen. Good.
    But, when I do the same on the external monitor (click the "Move to next display" button), then the window keeps the same size, and does not resize to the larger laptop window size (1680x1050).  
    In other words, the windows resize to the smaller display, but not the bigger display. What setting should I change?
    Leafgreen

    I think you messed up the embedded features of the question slides. Have a look at:
    Question Question Slides in Captivate - Captivate blog
    Personally I will never allow Backwards movement at all in a quiz. If you do that, you can drag the Next button under the Clear button. The Next button has a double functionality: during the Quiz it acts as a Skip button and that is what you do not want. During Review it acts as a Next button. If you do not use Review, you don't need the Next button. If you want Review, dragging the Next button under the Clear buttons solves the problem: during Review both Clear and Submit button will disappear and the Next button will be come available.
    I cannot see directly what happened with the actions that are not executed, unless you have another shape button on the question slide that pauses after the pausing of the Submit button.
    Your setting 'Required....' can cause problems as well, especially since you allow free navigation within the quiz (and outside) with the Back and Next navigation.
    Please, try to read that blog post, and if you have more questions, will try to answer them.

  • Display queue shows values but not in test tab

    Hi,
    We have a mapping scenario where we need to duplicate nodes and create the second node based on the coditions. The second node is a duplicate of the first node. The second node has the same mapping as the the node it was duplicated from. While testing the mapping in Display queue the values are coming in correctly for the duplicate node but during the testing in the test tab, the duplicate node values are missing. Context seems right but not sure why the duplicate node mapping does not work during testing?
    Teresa

    Hi,
    you should map the source node of the duplicated node with the required condition . it means when the conditions is true the duplicate node (source node) should get generated at the output.
    If <condition> True -
    > creatIf --- > source node of duplicated node
    Thanks
    Jyoti

  • 16:9 footage displays properly in timeline but not in menu

    Greetings guys,
    this is a follow up to a 16:9 import issue I had previously.
    We now have a good quality 16:9 file that imports as an asset into Encore no problem. It plays back perfectly in Encore in a timeline but if I use the footage as a menu, which I intend to do with one clip then it puts letter boxes either side of the footage. I check 16:9 in the properties but it doesn't help... I don't understand why encore will play the widescreen footage and display it properly in a timeline but not as a menu...
    any thoughts would be great,
    here's some footage details:
    CODEC: MPEG2
    FRAME RATE: 25.000 /s
    DAR: 1.778 (16:9)
    720 x 576
    SAR: 1.250 (5:4)
    PAR: 1.422 (~10:7)
    cheers,
    Grant :)

    Select the menu then "Edit->Edit Menu in Photoshop"
    Verify the menu dimension in Photoshop, if the menu is HD size then reduce it to 720x576.
    Or use any DV-PAL size menu from Encore library.

  • Review: Arch: Pros Only, But Not Bad

    Saw this on Tux Machines. A very simple review.
    distrogue.blogspot: Arch Linux is one of the few distributions to be optimized for an i686 processor- in other words, it's really fast without having to compile anything. It uses a custom package manager called Pacman.
    Overall: 3.2/5- A solid distribution, but not recommended for newbies.

    fflarex wrote:
    I think it was a pretty bad review. It seemed to me like he was trying to review Arch using the same criteria as he would if he were reviewing other distros, without taking into account the different goals that Arch is built on. He acknowledged that Arch was only for "pros," but continued to review it as if it were not. Arch may only be suitable for competent linux users, but as far as similar distros go, Arch still greatly simplifies most administration tasks. I really don't understand how he only gave a 3.5/5 for package management, citing "too many options" and a lack of a GUI. Last I checked, a GUI was not an integral part of package management, but is handled by separate programs (and isn't there a packagekit backend being developed by someone around here?).
    Off topic, but I also just have to say that xabbott: you have the coolest avatar ever!
    Yea, he reviewed it as a Ubuntu user would review it, not reviewing it compared to EVERY distro or reviewing it on it's own merit. For example:
    Slackware = MUCH harder to install, but he didn't mention that
    Gentoo = Source-based distro...He said it's harder to install, but i always found it just as easy, perhaps easier if you don't count the time you wait around for it to compile

  • Query Governor - Summary Data - Only when not out of date?

    In Oracle Discoverer Desktop edition the user can choose how Summary Data are used:
    1. Always, when available
    2. Only when summary data are not out of date (stale)
    3. Never
    What exactly is the meaning of "Only when summary data are not out of date"?
    In previous versions of Discoverer you had the opportunity to specify how old (in days) summary tables were acceptable to you.
    (By the way: In the Danish translation of Discoverer the word "not" has been omitted, so you have the opportunity to use summary data only when they are out of date :-)
    Best regards
    Torben

    Actually it doesn't matter if you have Applecare or not because Apple simply isn't recognizing this as an issue even though multitudes of people have experienced it. If they don't see it as a problem, then they obviously don't have a solution, and so taking your laptop in through apple care is totally useless.
    I've talked to 3 customer support representatives over the phone and they all said they were 'unaware of the issue' and would not even attempt to help. It's very disappointing.

Maybe you are looking for