Network Setup, Please Help.

Hello there,
Decided to install Arch once again, but I'm totally stuck with network setup. I've tried many different combinations in the config files, but nothing at all seems to work. I know the device is working (with Windows), and my details are correct. Perhaps I've misplaced something.
On issuing a network restart, I receive a message saying "SIOCADDRT: No such device". A similar message is issued when the network stops. I can only ping my own IP, not even the router's.
Could anyone lend a hand? I'm pulling my hair out here!
Thanks.
Device: eth0
My IP: 192.168.1.64
Router IP: 192.168.1.1
grep | eth0
eth0: RTL8168b/8111b at 0xf881c000, 00:1d:7d:95:65:e9, IRQ 16
route -n This was different at some points, but I've played around with so many options that it's hard to keep track.
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
rc.conf
HOSTNAME="linty"
lo="lo 127.0.0.1"
eth0="eth0 192.168.1.64 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(lo eth0)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
hosts
# I really wasn't sure what to do with this one.
127.0.0.1 localhost.localdomain localhost linty
resolv.conf
nameserver 208.67.222.222
nameserver 208.67.222.220

OK... let's do this.
Your configurations seems correct, so to start troubleshooting we first ping your router with ping 192.168.1.1 do you get an answer? If you do good if you do not then as root issue this command: mii-tool to find out what is your Nic card doing and let's go from there.
R.

Similar Messages

I can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi

i can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi.

i switched off all the security settings and all the firewalls.
i m unable to install any of the app on the ipad
so i saw the apple support and it said to update the older version of my ipad.
and niether am i able to download the update nor am i able to download any app and install it in my ipad2
i also tried to download an .ipsw file (ios5 update) from torrentz bt i am also unable to install from that as itunes rjects that file and gives an error. and also tries to delete that file. plz anyone help urgently.

Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..

Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..
[email protected]

Both parties must be connected to wifi to use FaceTime (and you must have FaceTime turned on in Settings>Facetime). If you're phone shows 3G at the top when it's on, you're not connect to wifi; you'll have to solve that problem first.

I just transfer the new software to my iphone 4 and now it has no network. Please help me

I just transfer the new software to my iphone 4 and now it has no network. Please help me

I don't know what really happened and why and how it 'came back to normal again' but thank you so much you guys. I'm new at this, as you may seen, and i'm portuguese, and my english is terrible. you reallyyyyy helped me, i has just almost having an heart attack. This was my b-day gift and here in portugal apple stuff are very expensive (at least for me)

FLEX and CF Debugger setup - PLEASE HELP

I can't get the line debugger for CF in eclipse to work for
the life of me. I've been trying this for over 8 hours now. I
follow the directions on all the tutorials out there on the web and
still no luck. All my CF admin settings are correct. I think it has
to do w/ the debug mappings but not sure. I have a remote CF server
and am running Flex Builder 3 off of my local laptop (so wouldn't
that mean that the server and Eclipse are not on the same machine?)
My web root is a mapped network drive to the remote CF machine
(z:\websites). I can connect to the CF RDS fine... I can use the
wizards fine... I can set the breakpoints on the CFC page fine...
but the debugger just will not show me any variables. Please help
me to understand what I am doing wrong.

For anyone having difficulty setting up the debugger please
follow these steps (btw all the tutorials out there are awful and
leave out important steps so I thought I'd document this to help
others out). Being a software application developer and not a
network admin these remote paths can be rather difficult to
understand.
1. uninstall any Flash player or plugins you have
2. run and install the Flash player and debugger that comes
with Flex Builder (its located in the Flex installation folder,
mine was under C:\Program Files\Adobe\Flex Builder 3\Player\win).
You'll see 3 files, but only need to install Flash Player Active X
and Plugin
3. Ensure you'r debugger and tester are working (CF line
debugging is enabled). In Windows Preferences under Adobe -->
RDS click the 2 test buttons.
4. Install CFEclipse (to be able to get code hints and have
Eclipse color code cfm and cfc's like DreamWeaver does)
5. Make sure you have 2 breakpoints in the section you want
the debugger to stop. I was using 1 and on an empty space and that
wasn't stopping on the breakpoints. Also make sure the breakpoints
are on a coldfusion command line.
6. If you are using localhost don't add anything to the
mappings section other than
http://localhost:(your port
number, if you run CF admin you will see the port number in your
URL). If you have a CF server remotely though this is the TOUGH
part. It took me days to figure out my mappings. I'll just give you
my setup and work with that to figure out you're own.
I mapped my remote server drive to Z:\ and my WWWroot is
z:\websites so the correct Eclipse path = z:\websites.
The correct Coldfusion path is /websites (don't ask me why or
how, but anything other than this was not working)
7. Run the debugger by clicking the right arrow next to the
debug icon, select Other and select CF(launch a new config is you
dont have one already). When you set it up and press "Debug"...
press F11 to run a browsing session. Navigate to the page you set
breakpoints for and the debugger should work!
I hope this helps and saves others the agony of playing
around with mappings.

5800 MMS Setup - Please Help

Hi,
I can receive MMS on my Nokia 5800 but cannot send. I have received the server settings from my service provider and saved it. Did the setup and rebooted my phone, but it keeps on going to the outbox and it will try and resend every 10 min.
I did phone my service provider but they cannot assist me as the network settings are as far as they can assist.
Please help me, I am desperate. I really tried everything.
Regards,
Malinda V

I guess, you're not all that stupid. You can upload, but not download. You can use the phone as a modem, whitch uses the same config files they send you. Facebook could very well be the culprit, because it uses the same connection. Exit all apps before connecting your browser. If this problem continues, contact your SP( 50MB? they should be ashamed) again and again and again till they sorted it out. You rule!
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I am having some serious wireless networking issues - please help!

I had a working wireless network setup in my home until the laptop was dropped and the hard drive needed to be replaced. The network consists of the laptop, desktop and wireless printer. I am now unable to get my wireless network up and running again. Is there anybody that can walk me through this. Right now I have the laptop hardwired to the cable modem so I am able to use the internet.
Please help!!!!!!

1. Go to Wireless. Set using Manual Config.
    Mode = Mixed
    SSID = Create your own SSID
    Channel = 9
    Broadcast = Enabled
2.Go to Wireless Security
    Security = WPA Personal
    Passphrase = Type your 8 character long password
3. Go to Security. Disable Block/Filter WAN Request
4. Check if you are still online wired.
5. Connect your laptop to the wireless network
Regards,
Lord Maxthor

Power Spike Threw My Network? PLEASE HELP!!!

Tuesday night we had a power spike that seems to have killed my network. I wanted to know has this happened tpo anyone else and if so how did you fix it. My problem is this,my ISP is Mediacom, I have a 10 MB connection, a Linksys WRT54GS V7 firmware 7.50.2 and I cannot get anything to connect to my wireless network. My pc that is wired into my router is fine. Getting good connection. I also have a Playstation 3 that connects wireless, Xbox 360 that connects wireless through a Linksys WGA54G, a pc that connects trough a Belkin wireless desktop card, and a Nintendo Wii that also connects wireless. Now Tuesday during the day everything was connected and fine. Wednesday I woke up to find that everything on my network had reset themselves and would no longer connect to the existing network. So I tried to reset everything on a new network. I couldn't get anything to connect. I replaced my router with the same model number and upgraded the firmware to v7.50.2. I called Mediacom and they reset my internet connection saying that my "modem was getting too many signals form my electronics and not my router"(?). Everything came up fine only to go down after about 5 mins (right after I tried to connect my PS3). Afterwards I called Mediacom back had them reset my connection and only tried my pc. It would connect but it would say little or no connectivity. Called Linksys support and a nice lady named Marie told me to change my from TKIP to AES change my channel to 11 and so forth and so on. It worked for about 5 mins and went down again. I called them back and again they changed my channel and lower my MTU. This time it would work but it was incredibly slow. Now I have no idea what to do and am quickly coming to my wit's end. Please help.
Message Edited by pugnacious_apbt on 09-13-2007 02:25 PM

I dunno dude. This is killing me. Mediacom won't help me because they don't support in home networks. I have never had a problem before now. I had the original router for almost a year. Power spikes are quite common throughout this area and it was always fine. Now all of a sudden I have this. I dunno what to do. I need all the help that I can get. I have never had a problem with any of my Linksys products. Just run the CD and plug in everything and I'm online. Simple. Lately I have seen more of my admin screen than I had ever hoped to.

E 6 Personal Mail setup -- please help

Hello E6 experts,
can you please help me with the steps involved in setting up personal mailboxes in the E6? It's been asked before here... Every time I begin using the mail setup "wizard" I only reach the option for Mail for Exchange. How can one bypass that to setup Gmail and a regular, Imap personal mail box? What might I be missing? Thanks in advance...

Hello again,
I just found out about the problem-- One has to have a SIM card installed (at least for the first time) to be given the options for the various mail services up-front during mail setup. I was trying t do this without a SIM card --using the WiFi connection-- which every other cell phone I have owned allowed me to do. Apparently the E6 is different... Perhaps this will help someone

Zyxel AG 225H & Mac Networking Challenge PLEASE HELP

Hello, trying to help a friend join network already established at her house. Office is about 200 yards from Linksys router, Zyxel AG 225H "reads" network from office location, so far so good. Following instructions, downloaded Mac drivers fm Zyxel site, loaded Zyxel unit into USB port but have been unable to proceed beyond the Zyxel scanning for networks to join (which it seems to do endlessly). AG 225H is supposed to act as adaptor enabling iMac to join wireless network. But it's not clear what the next steps are. Instructions with Zyxel are poor, their tech support not available again until Monday..
anyone have experience and can please help with suggestions? It's not clear if I need to do active configurations on the iMac in order to activate network.
My friend only has 9Gb (!!) of free hard drive space on iMac which I think could not be helping?
thank you
iMac Mac OS X (10.3.9) Zyxel AG225H, 768 Mb SDRAM, 800 Mhz PowerPC G4, 60 Gb Hard Drive

I hate to tell you 200 yards is a out of range for this connection the only way I am aware you can do this is to either run a cable or do the below to extend the range.
http://docs.info.apple.com/article.html?artnum=107454
This the reason it scans continuous and can't connect, it's out of range.
Don

I think someone HACKED into my Network..please help!

Hi,
I have a Powerbook, 4 years old,never had any trouble with network changes or losing control with settings.
Recently I was logged into Messenger and was disconnected with the message *+"you were disconnected because you were logged in at another device or terminal"+*. Which was very odd. I logged out and logged in again and it came up again shortly thereafter. Then I went into my System Preferences/Network and when it popped up a message said "Your network settings have been changed by another application". This definitely didn't smell right.
I'm the only one who controls the network settings,it's a home/internet network. I use a Mac Airport Base Station.
Please help with any insight or suggestions on how to change my settings back or what to do. Thank you.

BGreg wrote:
Yes, a closed network doesn't broadcast the name (SSID) of the network.
If you want to be absolutely sure somebody can't get into your network, enable the mac address control, which will only allow the defined systems to use your network.
Actually, the only setting that really matters is WPA.
The WPA layer is the most hack-proof security method, so if a hacker is good enough to get through WPA, no other layers will stop them. The hidden SSID can easily be sniffed out of the air and then accessed, and the MAC address filter can be evaded by, again, simply sniffing the transmissions and then cloning the MAC address of the client machine that's obviously allowed in, so that the router thinks the hacker's machine is your machine.
With WPA the one thing you have to do is use a password that isn't in any dictionary, since the only attack WPA is vulnerable to is a dictionary attack. If you can avoid that through the intelligent choice of a password, WPA is pretty solid, especially WPA2.

Reset server password/setup PLEASE HELP!!

Hi, thank for looking at this and trying to help.
I am the proud owner of a mac mini lion server. The problem is in my playing around with getting a new product (like we all do) I came across the server I have done some research and I really like the idea of it and want to put it into good use. (the reason I got the server one was because of the better hard drive, before you ask why did I get it if I didn't know what the server bit is)
The only problem is, whilst playing around I set up the server. I now go back into the server app and it says type in admin name and password which is already on there in the key chain. I press connect and it fail. ( whic is weird as I would of had to of typed it in for it to be in the key chain)
I have tried different user names as I only use one password. And still it shakes at me saying it's wrong.
The question is how can I reset the Account? Without losing all my info.
PLEASE HELP I want to use this great feature!!

Same problem as the others. I have a 2 week old Mac Mini and arrived at this point after I'd followed the Hoffman Labs (http://labs.hoffmanlabs.com/node/1436) DNS setup and not being able to get past the "Available Servers (0)" problem rported elsewhere and then a subsequent new system restore. I also can't get past the:
sudo changeip -checkhostname
Current HostName = server.local
The DNS hostname is not available, please repair DNS and re-run this tool.
I feel I'm at the point of an erase and clean install.

K7n2 Delta RAID Setup ----PLEASE HELP

Can someone explain how a RAID - Striping should be setup on this MOBO? I can not get the board to see the 2nd drive. I have duplicate Maxtor 40gb drives and it will only see one of the drives. I am using IDE3 for one of the drives and then putting the other drive on IDE1. The manual states that you can only have 1 HD on IDE3 thus the reason for setting it up this way. I have also tried the 2 maxtor drives on IDE1 with another drive on IDE3 (dummy RAID) hoping that this config would work as well, but it did not!
Please help!!!!!!!!!!!!!
Thanks in advance for any and all replies.

It does support RAID. I have been able to go into the Fastrack utility and setup a RAID consisting of one drive. The manual also states that all IDE slots support RAID. It has the promise 376 chip.

Wont let me into itunes store due to network settings, please help!

I previously had no problems with the store and have regularly purchased from it. Since going wireless I can no longer get in and now when I try through modem it doesn't work either.
I have flushed the DNS settings as advised, but, no joy. If anyone has any ideas please help me.

Try these;
1 - http://docs.info.apple.com/article.html?artnum=302182
2 - http://docs.info.apple.com/article.html?artnum=304082
3 - http://docs.info.apple.com/article.html?artnum=93434
4 - Check the firewall on your broadband router/modem.

Nintendo 3DS not connecting during online games to Macbook Pro or Airport Express Network. Please Help.

I would love to post this question to the Nintendo Support forums, but I'm abroad right now and it seems I am denied from the forums if I try to log in.
My Nintendo 3DS's internet features all work perfectly fine except when it comes down to directly playing a match with other users. For example, Mario Kart 7 will download Spot pass data like normal every day, but everytime I tray to play a match online, the software gives me an error. Same thing when I try to connect with people on Animal Crossing: New Leaf. My previous linksys router back in the states worked fine. The security was WEP I remember. Now I've got myself an Airport express and neither it nor my Macbook Pro (when sharing is turned on) will permit me direct online access to other users like I stated above. I even disabled security and went with an open network for a few minutes and was faced with the same exact problem.
I know this is very specific and mainly involves a none apple product, but I'm just curious what is different about the Apple wireless networks I'm setting up that is preventing me from nothing but direct realtime interactions with other users.
Any advice or knowledge about Apple security or wireless networks would really help me out. There are only so many settings I can tweak in the Airport Express so I'm sure it can't be too difficult, but I don't even know where to start.

I guess it's a problem with NAT (Network Address Translation). My ISP is Vectant Ltd. so maybe I should get a hold of them. If anyone has any work arounds that maybe they used with other game consoles (Xbox Live, PSN), I could really use the suggestion. I really like the Airport express and assumed it would be compatible, but I guess not.

Network Setup, Please Help.

Similar Messages

Maybe you are looking for