Networked Time Machine Backup in Yosemite (10.10.1)

Hello Everyone!
I am having issue using a networked Time Machine volume with my Debian Box. Prior to 10.10.1 Yosemite update Time Machine was working just fine. Even issuing the command sudo tmutil setdestination "afp://<Remote Server Address>/Time\ Machine/<sparsebundle>" and defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1, Nothing seems to work. Time Machine doesn't recognize the drive. I am able to connect to the drive by going to Go, but Time Machine still doesn't see the drive. My Debian Box is using Nettalk in conjunction with AFP. I followed this link as a guide. If anyone know a work around that would be greaaaaat.
Thanks!

A "Netatalk" server is unsuitable for use with Time Machine, especially if it's your only backup. I know this isn't the answer you want. I know Time Machine accepts the server as a backup destination. I know that the developer says the server will work with Time Machine, and I also know that it usually seems to work. Except when you try to restore, and find that you can't.
Apple has published a specification for network devices that work with Time Machine. The incomplete, obsolete Netatalk implementation of Apple Filing Protocol doesn't meet that specification.
If you want network backup, use as the destination either an Apple Time Capsule or an external storage device connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
Otherwise, don't use Time Machine at all. There are other ways to back up, though none of them is anywhere near as efficient or as well integrated with OS X. I don't have a specific recommendation.

Similar Messages

Network time machine backup not showing on Yosemite

Hi,
One of the people within the office is having a problem with their Time machine backups. The password had been changed on the computer where the hard drive is shared but they where not concerned with their backups as they are using a Macbook so they back up at home and we also use a time capsule as a backup backup drive incase the main drive has stopped for some reason.
Now they are wanting to use the main drive to back up to and I can not seem to find the drive in time machine but when I connect to the computer where the drive is attached to I can gain access to the drive but Time machine can not find it.
The host computer is running Mavericks and the computer that is having problems is using Yosemite Beta could this be why time machine is having trouble trying to find it?
The drive in question is a SmartStor DS4600 6TB no one else is having problems backing up to it, they are using Mavericks.
Thanks,
Bruce

Hi philravens24!
I have an article here for you that can help you troubleshoot this issue:
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/ht3275
Further articles addressing Time Machine issues can be found here:
OS X Mountain Lion: Time Machine problems
http://support.apple.com/kb/PH11194
Thanks for using the Apple Support Communities!
Cheers,
Braden

Time machine backups disappear Yosemite

Since upgrading (that is a joke) from ML to Yosemite I am seeing backups on time machine disappear from my back up drive. Another oddity is that the icon does not spin around while backing up. Any help would be appreciated.

The Time Machine icon stopped spinning when Mavericks was released in the Fall of 2013. Instead, since that time, there is a bit more of a separation in the lower left area of the circle (near the arrowhead) when the backup is occurring. Further, the arrow turns into a double arrow.
Backups may well disappear as the disk housing the Time Machine backups becomes full.
OS X Yosemite: If your Time Machine backup disk runs out of space

Can't access Time Machine backups on Yosemite

Hi guys
I'm having some trouble with TIme machine. I did a clean install on my mac. Upgraded it to Yosemite. I could then access my backed up files (although Apple hides most of it for any reason). As soon as I chose the same external hard drive to again be my Time Machine backup drive, all the older backups got unaccessible. When I open Time Machine I can see my older backups but they won't show any files. If I manually look for them in Finder I am locked out.
Is there any way to tell OS X to please let me have my files back?

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
If you need to restore from a backup of the hidden user Library folder, first select a snapshot, then press shift-command-G. A Go to Folder dialog will open. In it, you'll enter the path to the folder. The dialog will help you by automatically completing the parts of the path when you start to type them.
The path begins with slash character ("/"). Enter that. The rest of the parts will be separated by slashes.
The next part is the date and time of the current snapshot. Enter a "2", and the rest of the date should be filled in automatically. Press the right-arrow key to jump to the end of the path. Enter a slash to start the next part.
Next is the name of the volume (usually "Macintosh HD" unless you gave it a different name.) Start to type that, then jump to the end and enter a slash.
The next part is "Users", followed by a slash.
Next is your (short) user name, which is also the name of your home folder.
Finally, enter "Library", then press return. You should now be in the Library folder. From there you can get around as in the Finder.

Migrate time machine backup to Yosemite

I bought a new mac. My old mac was backed to an external disk up using time machine. I connected the external disk to my new machine and powered up. The first thing that launches on first power-up is a special piece of software called migration assistant. The migration assistant re-created my files and everything from the backup external disk. It took a while, but it worked great.
At the end of the migration assistant run, it asked me whether I wanted to use the external disk for future backups. Migration assistant warned that if so then it would have to alter the backup files (probably some indexes is my guess) in a way that the backup could no longer be used with my old computer. Well, I was a little concerned about losing things before I tried my new computer, so I told migration assistant to leave the time machine backups alone.
Now I am happy with my new machine, and I want to migrate the old backup files to become the backup set for the new machine. How do I do that?
If I enter migration assistant (it is in the applications folder) it appears to behave as though it will re-init my new computer. I do not want to do that. I only want migration assistant to convert the save set on my external disk into a save set for time machine under Yosemite.
Thanks for your help.

There is a way to force the backup history to be inherited, but I consider it too complicated for most users to carry out, and it won't do any good if you've already started using Time Machine with the new setup. If you're familiar with the shell and want to try it, search the tmutil(8) manual page for the terms "inheritbackup" and "associatedisk."
Otherwise I suggest you set the backup drive aside and stop using it until you're sure you'll no longer need the data. Then erase it and start over. Meanwhile, start a new backup on another drive. You need more than one backup to be safe anyway.

Still cannot access time machine backups after Yosemite install

Can anyone tell me what to do to be able to access my time machine backups. When I enter time machine nothing except apps and desktop are accessable. Thus I cannot restore anything that was "backed up" even this morning, much less any other day this year. Yosemite was installed on Oct. 19, took 2 days to download to an 2013 iMac. The first time machine backup took over 24 hours. I have made 1 backup per day since, only problem is that I cannot access any of this data. Please help me.

A bit more information would help figure out the problem. Maybe a screen shot of what you're seeing or not seeing (use Command+shift+4 to save an area of the screen or a window -type space first to capture an entire window- to a file and then attach that file to your posting reply). You might look at the Console app to get more information about what actually happened during your backups - suggest putting "backupd" (without the quotes) in the search field at the top right of window in Console - with the "All Messages" query selected on the left part of the window). Console is located in the /Applications/Utilities folder. After you enter the backupd in the search field only those messages that contain that string will appear which helps a lot since so many messages are normally shown without any search field string.
Depending on how long ago the backups happened, you might need to select previous versions of the system log files - they get archived and compressed to files like system.log.0.bz2 or system.log.1.bz2 (these are in the /var/log query choice if you don't see them in the existing query choices - just click on the triangle to the left of the "/Var/log" entry if needed). Console knows how to show the messages that are in these compressed files, so you don't need to do anything other than click on the query name.
Also if you look in TimeMachine in System Preferences are there any exclusions (click on the Options button in TM System Preferences to show what the existing exclusions are)? A screen shot of those would be helpful also.
Is there only one drive with the single Mac OS partition on it?
Hope this helps a bit...

Restoring selected files from a networked Time Machine backup

My wife's laptop logic board failed 2 days ago. It is backed up over our home network to a separate partition on a second hard drive in my MacPro. I'm trying to recover a few specific files from the day the machine failed.
When I try to mount her sparsebundle image, I get a message that the image could not be mounted "Reason -- not recognized".
Disk Utility claims the sparsebundle appears to be okay.
Using "Browse Other Time Machine Disks..." only shows the partition on the backup disk associated with my machine's backups.
Suggestions?

I have found a way around the issue. My wife's user account on my machine is set up as Sharing Only (just so her Time Machine can write files to the backup drive). So I went to my daughter's machine, turned off her TM, disconnected daughter's machine from mine, and then reconnected from daughter's machine as my wife's username. Then I could mount my wife's sparsebundle on my daughter's machine.
DR

Mavericks Time Machine Backup in Yosemite?

They say there are two kinds of people in the world. Those who backup and those who wish they did. I am the backup person, but when I did a clean install of Yosemite on my HD for a number of reasons, I cannot find my iphoto files (1000s of pictures). And I can't seem to utilize Time Machine at all. I have been able to manually drag files (music, documents, etc.) from the backup folder on the disk to the new system. But nowhere are my iphoto pictures....
So, where do I get the iPhoto files so I don't lose all my pictures? Is there a way to access a Mavericks Time Machine in Yosemite? Any help would be appreciated.
rog

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
If you need to restore from a backup of the hidden user Library folder, first select a snapshot, then press shift-command-G. A Go to Folder dialog will open. In it, you'll enter the path to the folder. The dialog will help you by automatically completing the parts of the path when you start to type them.
The path begins with slash character ("/"). Enter that. The rest of the parts will be separated by slashes.
The next part is the date and time of the current snapshot. Enter a "2", and the rest of the date should be filled in automatically. Press the right-arrow key to jump to the end of the path. Enter a slash to start the next part.
Next is the name of the volume (usually "Macintosh HD" unless you gave it a different name.) Start to type that, then jump to the end and enter a slash.
The next part is "Users", followed by a slash.
Next is your (short) user name, which is also the name of your home folder.
Finally, enter "Library", then press return. You should now be in the Library folder. From there you can get around as in the Finder.

Initial time machine backup crashes Yosemite 10.10.3

I have a 15" Macbook Pro 2.3 GHz Intel Core i7 running Yosemite 10.10.3 (14D136). I previously had a 1TB Time Capsule that ran pretty much without a problem. I recently upgraded to a new 3TB time capsule (http://store.apple.com/us/product/ME182LL/A/airport-time-capsule-3tb) .
I have attempted numerous times to complete the initial backup both via wifi and hardwired into the thunderbolt port. It will run for an hour or so then just says (stopping). After that the computer gives me the pinwheel of death. After a restart everything runs fine and can restart process but same things happens. I have about 720GB to transfer so it takes a while (10 hrs or so). Every time I return it has stopped. I have erased and reinitialized the time capsule disk several times.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Time Machine backups broken in 10.8

I have a Mac Mini with a USB hard drive attached that serves as a network-attached Time Machine drive for my main Mac client computer. Today I have upgraded my rock-solid 10.6 home server to 10.8, hopeing they have finally ironed out the bugs in the SMB stack (that replaced Samba).
I immediately notice that Time Machine performance is very poor from the client machine (over gigabit ethernet). I googled around and apparently Apple has decided to gate Time Machine backup performance unless you purchase OS X Server via the App Store. So I purchased OS X Server via the App Store, and the performance issue is fixed.
Next I decide I want to start fresh with Time Machine backups, so I reformat the drive, and since then it won't show up in the drive list on the Time Machine preference pane (on the client machine looking to initate the backup). From what I can tell OS X Server just flat out prohibits backing up to network shares on an OS X Server. It appears you must designate a drive on the server for Time Machine backups. The server then creates a new share point 'Backups'. While this isn't as easy or as flexible as it used to be, bygones. After designating my hard drive via the Time Machine pane, I am able to choose the 'Backups' share on the client, but every time it tries to initate a backup it errors out with: The backup disk is not available.
At this point I am very frustrated. Apple has taken something that was very straightforward and twisted it into something that is more complex, more expensive, less flexible, and apparently non-functional. This seems very un-apple-like. Am I doing something wrong there? There seems very little actual information floating around about the mechanics and requirements of Time Machine on the server or client side (outside of developer reference docs about what specific AFP features are necessary for network Time Machine backups).

I have a Mac Mini with a USB hard drive attached that serves as a network-attached Time Machine drive for my main Mac client computer. Today I have upgraded my rock-solid 10.6 home server to 10.8, hopeing they have finally ironed out the bugs in the SMB stack (that replaced Samba).
I immediately notice that Time Machine performance is very poor from the client machine (over gigabit ethernet). I googled around and apparently Apple has decided to gate Time Machine backup performance unless you purchase OS X Server via the App Store. So I purchased OS X Server via the App Store, and the performance issue is fixed.
Next I decide I want to start fresh with Time Machine backups, so I reformat the drive, and since then it won't show up in the drive list on the Time Machine preference pane (on the client machine looking to initate the backup). From what I can tell OS X Server just flat out prohibits backing up to network shares on an OS X Server. It appears you must designate a drive on the server for Time Machine backups. The server then creates a new share point 'Backups'. While this isn't as easy or as flexible as it used to be, bygones. After designating my hard drive via the Time Machine pane, I am able to choose the 'Backups' share on the client, but every time it tries to initate a backup it errors out with: The backup disk is not available.
At this point I am very frustrated. Apple has taken something that was very straightforward and twisted it into something that is more complex, more expensive, less flexible, and apparently non-functional. This seems very un-apple-like. Am I doing something wrong there? There seems very little actual information floating around about the mechanics and requirements of Time Machine on the server or client side (outside of developer reference docs about what specific AFP features are necessary for network Time Machine backups).

Restore Time Machine backup from WD My Could (a network drive)

Good morning. I recently had my hard drive replaced on my iMac. I had been using My Cloud as the repository for my Time Machine backups. When I started my iMac when I got it home, it is not recognizing where the Time Machine backups are and it does not allow me to navigate to a location to find it. It seems as if the utility is looking for the backups to be directly connected to the machine and not over my network.
Has any encountered this same issue and successfully resolved it? If so, how?
I was on Mountain Lion and now I am on Yosemite.
Thank you,
Jay

Time Machine does not support the use of a 3rd party NAS.
Try taking a look here for possible help. Pondini

Restore a time machine backup (Yosemite)

Hello all,
Since updating to Yosemite I've had so many problems trying to get it to work properly. I want to do a clean install. Firstly, I made a backup of my Yosemite (10.9) via Time machine. I then installed the latest version of Yosemite with a clean install, when I tried to restore the Time machine backup (just files and applications) I get a warning stating: This backup has been made on a newer version" Yet the backup was made on 10.9!
I then restored my backup and tried updating Yosemite 10.9 to 10.10 via the App Store. Again I get an error stating that I can't open the installer as the version I'm using is newer.
I need the files and applications that I've got. That is why I need the Time Machine backup. I'm open to some suggestions on how to resolve this.
Note: Several aspects on my current system do not work, ever since I did an App Store update to Yosemite. Items such as Disk Utility gives an error of "Incorrect Disk Utility Version" and Wifi network drops an aweful lot.
Thanks
Dan

So you did the fresh install the way I said?
If yes then try booting to Internet Recovery by holding down Command+Option+R at startup. Yo know yo are in Internet Recovery since you have to connect to the internet right away to download disk utility and other necessary things.
Internet Recovery initially asks you to select a Wi-Fi network and enter a network password when needed. Next, Internet Recovery downloads and starts from a Recovery System image. From there, you are offered the same utilities and options as the Recovery System on a startup drive.

Time Machine Backup Failed even though I still have 1.9TB of a 2TB Time Capsule. I am using Yosemite.

Time Machine Backup Failed even though I still have 1.9TB of a 2TB Time Capsule. I am using Yosemite 10.10.3 on an iMac (mid 2010)

The recent update in Yosemite (10.10.3) is causing some issues for some users.
Try a complete network power cycle as follows:
Power off each and every device on your network......modem, Time Capsule, computers, printers, etc......in any order that you want
Wait a minute
Power up the modem and let it run 2-3 minutes
Then, power up the next device that is connected to the modem an let it run a full minute
Then, continue to power up devices one at a time about a minute apart until everything is back up
Check the network
Wait for a backup to occur and report on your results

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Can Yosemite read a snow leopard Time Machine backup

Can Yosemite read a snow leopard Time Machine backup. Once I installed Lion over SL and it was a disaster since I could not get any docs or photos back, so had to put SL back on my old iMac.
Will 10.10 give the same problem or is there a way to migrate the old 10.6.8 data to 10.10?
Thanks

Yes, you can do that. The only limitation is that you can't encrypt the backup volume.

Networked Time Machine Backup in Yosemite (10.10.1)

Similar Messages

Maybe you are looking for