Never Share and inputting data into a Planning Web form.
Currently I have several accounts where there is one child per parent. The child member is set as "Never Share" and the parent member is set as "Dynamic Calc". When I show both the parent member and child member in a web form any data inputted into the child account is lost once the data is saved? How do I setup the web form so that I can save data to these child account members?
Thank you
Hi,
Little disturbing but what you are facing is called implied sharing. See below post.
Re: Saving data on form will not save
In short, you have two options:
1. Remove the parent from the form
2. Add a dummy sibling to the same member but do not show it at the form, you can have parent and child at the same time in the form in this case.
Cheers,
Alp
Similar Messages
-
NetRetryCount and netRetryInterval error in Hyperion Planning web form
User is getting this error when trying to save data on a web form. The error happens intermittenly and on different forms. It is difficult to pinpont the problem, as it does not happen consistently on the same form and as the administrator, I have never been able to replcate if on my computer and under the admin role. It actually causes the Hyperion Planning service to crash and we have to restart the service. The most recent time this occurred there was a rule that was running on save. We have removed the run on save for now. Does anyone know what setting need to be adjusted to eliminate this error?
Hi
You can probably try changing the value for netRetryCount and netRetryInterval in Essbase.cfg. Consider changing NetDelay too.
Essbase.cfg file is loacted in:
$HYPERION_HOME/products/Essbase/EssbaseServer/bin/Essbase.cfg
Thank You
Sandeep Kumar Upadhyay
Edited by: 901142 on Dec 8, 2011 11:49 AM -
How to specify date range in Planning web form?
Hi,
I want to specify a Month range in column of Planning 9.3.1 form.
I thought $forecastmth : Dec would work but it does not.
I even tried Oct:Dec and it does not work.
Any suggestions?
Thanks in AdvanceAs of the current version of Planning (11.1.1.3), there is no way to specify a range during the creation of a web input form. You have to add the months you want (in the order you want them) to the form individually. There's no way to add a function that produces a member list, other than the built-in @DESCENDANTS, @LEV0, @CHILDREN, etc functions.
I have seen clients build alternate hierarchies to support this type of requirement, but that's a fairly indirect way to achieve this. Back in the days when we would build VBA planning apps. you could put a range into a substitution variable (eg. "Oct":"Dec"), however I don't think that a Planning web input form will interpret this correctly.
- Jake -
Input data into dynamic calc in Planning forms
Hi guys,
Have someone tried to combine these two requirements:
1. to have upper level members dynamic calc
2. to give users the ability to input data into those upper level members through Planning forms.
I need to do that in order to pass inputted values into HBR, and allocate those values to the leaf level across multiple dimensions. I need those members dynamic calc because otherwise I would need to aggregate data across 7 dimensions and that takes too long. Those allocations are suposed to happen constantly and are the main purpose of application.
I know you can have dummy stored members that correspond the uper level dynamic members, but then the user will have input forms without current data and will be required to check reports/forms with dynamic calc members prior to updating data.
I wonder if it is a realistic task to change jsp files that generate those forms, so that data can be inputed into the form, but instead of passing it to Essbase cube to send it to relational database.
P.S.
This is related to the thread I opened about optimizing recalculation time:
Recalculatiion takes much longer than initial calculation
I received a lot of valuable advices that would definitely work in other situations, but in my case they seem to contradict either user concurrent access or performance requirements.
Thanks a lot!
DmitryHi Glenn,
I think i found a workaround for this, or may be i am missing something. I will replicate my hierarchies so that one hierarchy will have uper level stored members, and another dynamic calc. Once user loads the form it will run on-load script that will copy data from corresponding dynamic calc to stored slice. The updated data will be alocated to the leaf level, but will never be aggregated. Since reporting is done from ASO cube i only care about the leaf level and current selection in the form.
Thanks! -
I have manually inputted data into a blank spreadsheet and would like to use a form to enter data into that sheet !!! How do I do that please
Leigh,
After creating your table, Tap the Tab marked "+" and select "Form" - you will be asked which table to use. (You should get into the habit of naming your tables - if the table name isn't visible, select the table and tap the Styles (Brush) Menu > Table > Turn ON table Name, then double tap on the Table to edit it.)
Select the table you wish to to fill with a form and you will see a new form based on the header data.
The form will allow you to add one row at a time and when you get to the last row, there is an option at the bottom of the form to add a new row using the "+" button. At the top of the form is the row header which you can rename by double tapping.
You can also rename the form on the Tab by double tapping on the name.
Try it out. -
How to input data into an arraylist from a text file?
I am trying to take data from a text file and put that data into an arraylist. First here is the text file:
[item1, 10, 125.0, item2, 10, 12.0, item3, 20, 158.0]
3
4530.0
[item5, 65, 555.5, item4, 29, 689.0]
2
56088.5
[item7, 84, 34.5, item6, 103, 0.5, item8, 85, 1.36]
3
3065.1The text between the [ ] is the output from my arraylists. I have three arraylists. The first [ ] belongs to arraylist A, the second to arraylist B, and the third to arraylist C. The format of the arraylists is this:
<item name>,<# in stock>,<value of one item>
The first number below the arraylists in the text file represents the number of items in the list. The second number below the arraylists represents the total value of the items in the arraylists.
Here is the class file I have (yes, it does everything):
import java.io.*;
import java.util.Scanner;
import java.util.ArrayList;
public class Inventory extends Object
public int toAdd = 0;
private boolean done = false; //Are we done yet?
public String strItemName; //The name of the item type.
public int intNumInStock; //The number in stock of that type.
public double dblValueOfOneItem; //The value of one item.
public String strNumberInStock;
public double dblTotalValueA; //The total value of warehouse A.
public double dblTotalValueB; //The total value of warehouse B.
public double dblTotalValueC; //The total value of warehouse C.
public int intWarehouseAItemCount; //Counter for items in warehouse A.
public int intWarehouseBItemCount; //Counter for items in warehouse B.
public int intWarehouseCItemCount; //Counter for items in warehouse C.
ArrayList warehouseAList = new ArrayList(); //Create the Warehouse A ArrayList.
ArrayList warehouseBList = new ArrayList(); //Create the Warehouse B arrayList.
ArrayList warehouseCList = new ArrayList(); //Create the Warehouse C arrayList.
/** Construct a new Inventory object. */
public Inventory()
super();
/**Add items to the Warehouse A ArrayList.*/
private void createWareHouseA()
System.out.println("!" + toAdd + " item types will be added to warehouse A.");
//Cast
String strNumInStock = Integer.toString(intNumInStock);
String strValueOfOneItem = Double.toString(dblValueOfOneItem);
this.strNumberInStock = strNumInStock;
System.out.println("!Initial size of warehouseAList : " +
warehouseAList.size());
//Add items to the array List
warehouseAList.add(this.strItemName);
warehouseAList.add(this.strNumberInStock);
warehouseAList.add(this.dblValueOfOneItem);
System.out.println("!size of arrayList after additions " + warehouseAList.size());
/**Add items to the Warehouse B ArrayList.*/
private void createWareHouseB()
System.out.println("!" + toAdd + " item types will be added to warehouse B.");
//Cast
String strNumInStock = Integer.toString(intNumInStock);
String strValueOfOneItem = Double.toString(dblValueOfOneItem);
this.strNumberInStock = strNumInStock;
System.out.println("!Initial size of warehouseBList : " +
warehouseBList.size());
//Add items to the array List
warehouseBList.add(this.strItemName);
warehouseBList.add(this.strNumberInStock);
warehouseBList.add(this.dblValueOfOneItem);
System.out.println("!size of arrayList after additions " + warehouseBList.size());
/**Add items to the Warehouse C ArrayList.*/
private void createWareHouseC()
System.out.println("!" + toAdd + " item types will be added to warehouse C.");
//Cast
String strNumInStock = Integer.toString(intNumInStock);
String strValueOfOneItem = Double.toString(dblValueOfOneItem);
this.strNumberInStock = strNumInStock;
System.out.println("!Initial size of warehouseCList : " +
warehouseCList.size());
//Add items to the array List
warehouseCList.add(this.strItemName);
warehouseCList.add(this.strNumberInStock);
warehouseCList.add(this.dblValueOfOneItem);
System.out.println("!size of arrayList after additions " + warehouseCList.size());
/**Interpret the commands entered by the user.*/
public void cmdInterpreter()
this.displayHelp();
Scanner cin = new Scanner(System.in);
while (!this.done)
System.out.print(">");
//"line" equals the next line of input.
String line = cin.nextLine();
this.executeCmd(line);
/**Execute one line entered by the user.
* @param cmdLN; The command entered by the user to execute. */
private void executeCmd(String cmdLN)
Scanner line = new Scanner(cmdLN);
if (line.hasNext())
String cmd = line.next();
//What to do when users enter the various commands below.
if (cmd.equals("help"))
this.displayHelp();
else if (cmd.equals("Q!"))
this.done = true;
else if (cmd.equals("F") && line.hasNext())
this.inputFromFile(line.next());
else if (cmd.equals("K") && line.hasNext())
int numItemsToAdd = Integer.valueOf( line.next() ).intValue();
this.toAdd = numItemsToAdd;
this.inputFromKeyboard(numItemsToAdd);
/**What to do if input comes from a file.
* @param inputFile; The name of the input file to process.*/
private void inputFromFile(String inputFile)
Scanner cin = new Scanner(System.in);
System.out.println("!Using input file " + inputFile + ".");
System.out.print("!Enter the name of the output file: ");
String outputFile = cin.next();
System.out.println("!Using output file " + outputFile + ".");
try
BufferedReader in = new BufferedReader(new FileReader(inputFile));
//Scanner in = new Scanner(new File(inputFile));
//Initialize the String variables.
String line1 = null;
String line2 = null;
String line3 = null;
String line4 = null;
String line5 = null;
String line6 = null;
String line7 = null;
String line8 = null;
String line9 = null;
System.out.println(in.equals(",") + " see?");
//System.out.println((char)(char)in.read() + " experiment");
/**This loop assigns values to the string variables based on the
* values on each line in the input file. */
while(in.readLine() != null)
line1 = in.readLine();
line2 = in.readLine();
line3 = in.readLine();
line4 = in.readLine();
line5 = in.readLine();
line6 = in.readLine();
line7 = in.readLine();
line8 = in.readLine();
line9 = in.readLine();
//Print the contents of each line in the input file.
System.out.println("!value of line 1: " + line1);
System.out.println("!value of line 2: " + line2);
System.out.println("!value of line 3: " + line3);
System.out.println("!value of line 4: " + line4);
System.out.println("!value of line 5: " + line5);
System.out.println("!value of line 6: " + line6);
System.out.println("!value of line 7: " + line7);
System.out.println("!value of line 8: " + line8);
System.out.println("!value of line 9: " + line9);
/**Add items to the warehouses.*/
warehouseAList.add(line1);
warehouseBList.add(line4);
warehouseCList.add(line7);
/**Add the item count and total value for warehouse A.*/
int intLine2 = Integer.valueOf(line2).intValue();
this.intWarehouseAItemCount = intLine2;
double dblLine3 = Double.valueOf(line3).doubleValue();
this.dblTotalValueA = dblLine3;
/**Add the item count and total value for warehouse B.*/
int intLine5 = Integer.valueOf(line5).intValue();
this.intWarehouseBItemCount = intLine5;
double dblLine6 = Double.valueOf(line6).doubleValue();
this.dblTotalValueB = dblLine6;
/**Add the item count and total value for warehouse C.*/
int intLine8 = Integer.valueOf(line8).intValue();
this.intWarehouseCItemCount = intLine8;
double dblLine9 = Double.valueOf(line9).doubleValue();
this.dblTotalValueC = dblLine9;
/**Ask the user how many items to add or delete from inventory.*/
System.out.print("Enter the number to add to inventory for " +
warehouseAList.get(0) + ":");
String toAddOrDel = cin.next();
/**Print the contents of all the warehouses. */
System.out.println(" ");
//Print the contents of warehouse A.
System.out.println("!--------------------------------");
System.out.println("!----------Warehouse A:----------");
System.out.println("!--------------------------------");
//Print the item list for warehouse A.
System.out.println(warehouseAList);
//Print the total amount of items in warehouse A.
System.out.println("Total items: " + this.intWarehouseAItemCount);
//Print the total value of the items in warehouse A.
System.out.println("Total value: " + this.dblTotalValueA);
System.out.println("!--------------------------------");
System.out.println("!----------Warehouse B:----------");
System.out.println("!--------------------------------");
//Print the item list for warehouse B.
System.out.println("!warehouseB: " + warehouseBList);
//Print the total amount of items in warehouse B.
System.out.println("Total items: " + this.intWarehouseBItemCount);
//Print the total value of the items in warehouse B.
System.out.println("Total value: " + this.dblTotalValueB);
System.out.println("!--------------------------------");
System.out.println("!----------Warehouse C:----------");
System.out.println("!--------------------------------");
//Print the item list for warehouse C.
System.out.println("!warehouseC: " + warehouseCList);
//Print the total amount of items in warehouse C.
System.out.println("Total items: " + this.intWarehouseCItemCount);
//Print the total value of the items in warehouse C.
System.out.println("Total value: " + this.dblTotalValueC);
in.close();
catch (FileNotFoundException e)
System.out.println("!Error: Unable to open file for reading.");
catch (EOFException e)
System.out.println("!Error: EOF encountered, file may be corrupted.");
catch (IOException e)
System.out.println("!Error: Cannot read from file.");
/**What to do if input comes from the keyboard.
* @param numItems; The total number of items that will be added to the
* Warehouse(s). */
public void inputFromKeyboard(int numItems)
System.out.println("!You will be adding " + numItems + " items to " +
"inventory from the keyboard. ");
this.toAdd = numItems;
Scanner cin = new Scanner(System.in);
//Prompt user for name of output file.
System.out.print("!Enter the name of the output file: ");
String outputFile = cin.next();
/**This loop asks the user for information about the item(s) and inputs
*them into the appropriate array.*/
int count = 0;
while (numItems > count)
//Item name.
System.out.print("!Item name: ");
String addItemName = cin.next();
//Number in stock.
System.out.print("!Number in stock: ");
String addNumInStock = cin.next();
//Initial warehouse.
System.out.print("!Initial warehouse(A,B,C): ");
String addInitWarehouse = cin.next();
//Value of one item.
System.out.print("!Value of one item: ");
String addValueOfOneItem = cin.next();
//Add or delete from inventory
System.out.print("!Enter amount to add or delete from inventory: ");
String strAddOrDelete = cin.next();
System.out.println("!Amount to add or delete: " + strAddOrDelete);
//Cast
int intAddNumInStock = Integer.valueOf(addNumInStock).intValue();
double doubleAddValueOfOneItem = Double.valueOf(addValueOfOneItem).doubleValue();
int intAddOrDelete = Integer.valueOf(strAddOrDelete).intValue();
/**Add intAddNumInStock with intAddOrDelete to determine the amount
* to add or delete from inventory (If a user wishes to remove items
* from inventory simply add negative values). */
intAddNumInStock = intAddNumInStock + intAddOrDelete;
System.out.println("!Inventory after modifications: " + strAddOrDelete);
this.strItemName = addItemName;
this.intNumInStock = intAddNumInStock;
this.dblValueOfOneItem = doubleAddValueOfOneItem;
//Put items into warehouse A if appropriate.
if (intAddNumInStock < 25)
//Increment the warehouse A item count.
this.intWarehouseAItemCount = this.intWarehouseAItemCount + 1;
//Calculate the total value of warehouse A.
this.dblTotalValueA = this.dblTotalValueA + intAddNumInStock * doubleAddValueOfOneItem;
//Create the warehouse A array list.
this.createWareHouseA();
//Put items into warehouse B if appropriate.
if (intAddNumInStock >= 25)
if (intAddNumInStock < 75)
//Increment the warehouse B item count.
this.intWarehouseBItemCount = this.intWarehouseBItemCount + 1;
//Calculate the total value of warehouse B.
this.dblTotalValueB = this.dblTotalValueB + intAddNumInStock * doubleAddValueOfOneItem;
//Create the warehouse B array list.
this.createWareHouseB();
//Put items into warehouse C if appropriate.
if (intAddNumInStock >= 75)
//Increment the warehouse C item count.
this.intWarehouseCItemCount = this.intWarehouseCItemCount + 1;
//Calculate the total value of warehouse C.
this.dblTotalValueC = this.dblTotalValueC + intAddNumInStock * doubleAddValueOfOneItem;
//Create the warehouse C array list.
this.createWareHouseC();
//display helpful information.
System.out.println("!--------------------------------");
System.out.println("!" + addItemName + " is the item name.");
System.out.println("!" + addNumInStock + " is the number in stock.");
System.out.println("!" + addInitWarehouse + " is the initial warehouse.");
System.out.println("!" + addValueOfOneItem + " is the value of one item.");
System.out.println("!--------------------------------------------------");
//Increment the counters.
count++;
/**Create and write to the output file. */
try
//Use the output file specified by the user.
PrintWriter out = new PrintWriter(outputFile);
/**Write warehouse A details.*/
//Blank the first line.
out.println(" ");
//Write the array list for warehouse A.
out.println(warehouseAList);
//Write the amount of items in warehouse A.
out.println(intWarehouseAItemCount);
//Write the total value for warehouse A.
out.println(dblTotalValueA);
/**Write warehosue B details.*/
//Write the array list for warehouse B.
out.println(warehouseBList);
//Write the amount of items in warehouse B.
out.println(intWarehouseBItemCount);
//Write the total value for warehouse B.
out.println(dblTotalValueB);
/**Write warehouse C details.*/
//Write the array list for warehouse C.
out.println(warehouseCList);
//Write the amount of items in warehouse C.
out.println(intWarehouseCItemCount);
//Write the total value for warehouse C.
out.println(dblTotalValueC);
//Close the output file.
out.close();
catch (FileNotFoundException e)
System.out.println("Error: Unable to open file for reading.");
catch (IOException e)
System.out.println("Error: Cannot read from file.");
/**View the contents and the value of each warehouse.*/
System.out.println("!---------------Inventory Summary------------------");
System.out.println("!--------------------------------------------------");
System.out.println("!--------------------LEGEND:-----------------------");
System.out.println("!<item type>, <amount in stock>,<value of one item>");
System.out.println("!--------------------------------------------------");
System.out.println("!------------------Warehouse A:--------------------");
System.out.println("!--------------------------------------------------");
//Display Items in warehouse A.
System.out.println(warehouseAList);
//Total items in warehouse A.
System.out.println("Total items: " + intWarehouseAItemCount);
//Display total value of warehouse A.
System.out.println("Total value: " + "$" + dblTotalValueA);
System.out.println("!--------------------------------------------------");
System.out.println("!------------------Warehouse B:--------------------");
System.out.println("!--------------------------------------------------");
//Display Items in warehouse B.
System.out.println(warehouseBList);
//Total items in warehouse B.
System.out.println("Total items: " + intWarehouseBItemCount);
//Display total value of warehouse B.
System.out.println("Total value: " + "$" + dblTotalValueB);
System.out.println("!--------------------------------------------------");
System.out.println("!------------------Warehouse C:--------------------");
System.out.println("!--------------------------------------------------");
//Display Items in warehouse C.
System.out.println(warehouseCList);
//Total items in warehouse C.
System.out.println("Total items: " + intWarehouseCItemCount);
//Display total value of warehouse C.
System.out.println("Total value: " + "$" + dblTotalValueC);
/**Display a help message.*/
private void displayHelp()
System.out.println("!--------------------------------");
System.out.println("! General Help:");
System.out.println("!--------------------------------");
System.out.println("! ");
System.out.println("!'help' display this help message.");
System.out.println("!'Q!' quit this program.");
System.out.println("!--------------------------------");
System.out.println("! Input File Specific Commands:");
System.out.println("!--------------------------------");
System.out.println("! ");
System.out.println("!'F' <name> type F followed by the name of the " +
"file to be used for input.");
System.out.println("!---------------------------------------");
System.out.println("! Input From Keyboard Specific Commands:");
System.out.println("!---------------------------------------");
System.out.println("! ");
System.out.println("!'K' <number> type K followed by the number of " +
"items that will be added. ");
System.out.println("! ");
}Program file:
public class InventoryProg
public static void main(String[] args)
//Create a new Inventory object.
Inventory test = new Inventory();
//Execute the command interpreter.
test.cmdInterpreter();
}Right now I am stuck on this and I cannot progress any further until I figure out how to input the data in the text file back into a arraylist.
Thanks in advance.Thanks but I figured it out. Heres a sample of the code i used to solve my problem:
try
//Warehouse A BufferedReader.
BufferedReader inA = new BufferedReader(new FileReader(inputFileWarehouseA));
//Warehouse B BufferedReader.
BufferedReader inB = new BufferedReader(new FileReader(inputFileWarehouseB));
//Warehouse C BufferedReader.
BufferedReader inC = new BufferedReader(new FileReader(inputFileWarehouseC));
//Warehouse details BufferedReader.
BufferedReader inDetails = new BufferedReader(new FileReader(inputFileDetails));
//Will hold values in warehouse arraylists.
String lineA = null;
String lineB = null;
String lineC = null;
//Will hold the details of each warehouse.
String line1 = null;
String line2 = null;
String line3 = null;
String line4 = null;
String line5 = null;
String line6 = null;
//Get the item count and total value for each warehouse.
while(inDetails.readLine() != null)
line1 = inDetails.readLine();
line2 = inDetails.readLine();
line3 = inDetails.readLine();
line4 = inDetails.readLine();
line5 = inDetails.readLine();
line6 = inDetails.readLine();
/**Assign the item count and total value to warehouse A.*/
//Cast.
int intLine1 = Integer.valueOf(line1).intValue();
double dblLine2 = Double.valueOf(line2).doubleValue();
//Assign the values.
this.intWarehouseAItemCount = intLine1;
this.dblTotalValueA = dblLine2;
/**Assign the item count and total value to warehouse B.*/
//Cast.
int intLine3 = Integer.valueOf(line3).intValue();
double dblLine4 = Double.valueOf(line4).doubleValue();
//Assign the values.
this.intWarehouseBItemCount = intLine3;
this.dblTotalValueB = dblLine4;
/**Assign the item count and total value to warehouse C.*/
//Cast.
int intLine5 = Integer.valueOf(line5).intValue();
double dblLine6 = Double.valueOf(line6).doubleValue();
//Assign the values.
this.intWarehouseCItemCount = intLine5;
this.dblTotalValueC = dblLine6;
/**Put the items back into the warehouses arraylists. */
//Add items to warehouse A.
while((lineA = inA.readLine()) != null)
warehouseAList.add(lineA);
//Add items to warehouse B.
while((lineB = inB.readLine()) != null)
warehouseBList.add(lineB);
//Add items to warehouse C.
while((lineC = inC.readLine()) != null)
warehouseCList.add(lineC);
}(this isn't the whole try statement its pretty long) -
How to input data into a table with columns?
I am trying to input data into a table. My table have 5 columns and an unlimited amount of rows. I created a program in LabView that enters the data into the table but it enters all of the data in one row. I would like to enter the first set of information into the first column, the second set of info into the second column and so on. I am including a copy of the program that I am working with. I would like the number of runs to be put into the first column (it should count down like number 5 in first row, number 4 in second row, number 3 in third row, and so on). I would like the applied voltage to be placed in the second column, and so on. Any help or information will be greatly appreciated. I am working with LabView Version 6.1 and 8.0. I am submitting the vi from 6.1.
Attachments:
FJ-PROGRAM.vi 68 KBPondered,
I looked at your code and I think you might be making things too complicated. I've included a very simple example that demonstrates how to write a 2D array of integers to a table. Hope you find this helpful. It is in LV 7.1.
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect
Attachments:
rows - columns.vi 17 KB -
How to input data into Pdf file
I am not too sure if I am posting my question in the right forum.
I would like to know what version of Adobe acrobat can allow me to create a document, where clients can input data into it?
Here is an online example
http://www.uscis.gov/files/form/N-400.pdf
Thanks.
OceansIf your users will be using Reader and you want your users to be able to save the form or email it, you will need to apply 'Extended Form Rights' (version 8 Provessional or Version 9 Standard or better) and for signatures you will need to apply 'Signature Rights' using an Adobe server product.
-
Reading file and dump data into database using BPEL process
I have to read CSV files and insert data into database.. To achieve this, I have created asynchronous bpel process. Added Filed Adapter and associated it with Receive activity.. Added DB adapter and associated with Invoke activity. Total two receive activity are available in process, when tried to Test through EM, only first receive activity is completed, and waiting on second receive activity. Please suggest how to proceed with..
Thanks, Manoj.Deepak, thank for your reply.. As per your suggestion I created BPEL composite with
template "Define Service Later". I followed below steps, please correct me if I am wrong/missing anything. Your help is highly appreciated...
Step 1-
Created File adapter and corresponding Receive Activity (checkbox create instance is checked) with input variable.
Step 2 - Then in composite.xml, dragged the
web service under "Exposed Services" and linked the web service with Bpel process.
Step 3 - Opened .bpel file and added the DB adapter with corresponding Invoke activity, created input variable. Web service is created of Type "Service" with existing WSDL(first option aginst WSDL URL).
and added Assign activity between receive and invoke activities.
Deployed the composite to server, when triedTest it
manually through EM, it is promting for input like "subElmArray Size", then I entered value as 1 with corresponding values for two elements and click on Test We Service button.. Ptocess is completing in error. The error is
Error Message:
Fault ID
service:80020
Fault Time
Sep 20, 2013 11:09:49 AM
Non Recoverable System Fault :
Correlation definition not registered. The correlation set definition for operation Read, process default/FileUpload18!1.0*soa_3feb622a-f47e-4a53-8051-855f0bf93715/FileUpload18, is not registered with the server. The correlation set was not defined in the process. Redeploy the process to the containe -
How can we share and transfer data at Labview using the internet
How can we share and transfer data at Labview using the internet
Dr. Eugene Berman, Moran Kamilyan and Ravit Bar[email protected] wrote:
How can we share and transfer data at Labview using the internet
Check these links:
Basic TCP/IP Communication in LabVIEW
Data Sockets
Integrating the Internet into Your Measurement System -
Please recommend if we have options to read xml file and insert data into table without a temporary table.
DECLARE @data XML;
SET @data =N'<Root>
<List RecordID="946236" />
<List RecordID="946237" />
<List RecordID="946238" />
<List RecordID="946239" />
<List RecordID="946240" />
</Root>'
INSERT INTO t (id) SELECT T.customer.value('@RecordID', 'INT') AS id
FROM @data.nodes('Root/List')
AS T(customer);
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Header data and item data into same internal table
Hi Experts,
I WANT TO KNOW THE LOGIC TO POPULATE HEADER DATA AND ITEM DATA INTO SAME INTERNAL TABLE AND AGAIN DOWNLOAD THE SAME TO EXCEL FILE .Output file should be displayed like this format
Header1 rectyp ,hdnum ,sbank ,bankl ,accnr , paytp , crda ,iso.
Item1 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Item2 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Header2: rectyp ,hdnum ,sbank ,bankl ,accnr , paytp , crda ,iso.
Item1 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Thanks
Moderator message: Please do not use all upper case in the future.
Edited by: Thomas Zloch on May 12, 2010 3:10 PMHi,
for example we have 3 internal tables
1> it_header 2>it_items 3>it_final (which contains all the header and item fields)
once it_header it_items are filled
loop at it_items.
read table it_header with key xyz = it_item-xyz.
if sy-subrc = 0.
here move all the header fields to it_final like below.
it_final -xfield = it_header-xfield.
endif.
here move all the item fields to it_final like below.
it_final -yfield = it_item-yfield.
append it_final.
clear it_final.
endloop.
now header and item fileds will be fillled in it_item -
Cannot input data into Text Field on from Adobe Acrobat Reader
I created a form in Acrobat 5 that has check boxes and text fields. Using reader I can open the doc and use check boxes and input text into fields. Once this doc is loaded to our web server and a user opens or downloads the file they can check the boxes but cannot enter any text into the text fields. Am I missing something?
Thanks in advanceAnd so.. what is invalid?
I've uploaded the pdf files as example:
My generated pdf
http://compuhelp.free.fr/adobe/before.pdf
The modified version by Adobe Acrobat Reader:
http://compuhelp.free.fr/adobe/after.pdf
(I can generate a more complexe pdf file with fonts, images,... it will be displayed correctly, but Adobe always want to modifiy it).
So perhaps I missed somthing into the pdf file format specification ? -
Drop, create and insert data into few intermediate tables
Hi All,
I need to schedule a process to drop, create and insert data into few intermediate tables on a weekly basis. Here is what i need to do in the stored procedure, which can be scheduled weekly.
DROP TABLE TABLE_NAME1;
DROP TABLE TABLE_NAME2;
DROP TABLE TABLE_NAME3;
CREATE TABLE TABLE_NAME1
CREATE TABLE TABLE_NAME2
CREATE TABLE TABLE_NAME3
INSERT INTO TABLE_NAME1 SELECT ....;
INSERT INTO TABLE_NAME2 SELECT ....;
INSERT INTO TABLE_NAME3 SELECT ....;
Any suggestions, examples or code on how to accomplish this task would be very helpful. Any question pls let me know.
Thanks in advance.I am using the intermediate tables in an extract process. The idea was that the table would be created prior to calling the extract procedure and once the data written to the intermediate table had been processed the table would be dropped. This would be repeated each time the extract process is run. From a DBA's point or view, would it be better to just leave the table on the database and truncate it after each run or is removing it entirely best?
-
How can FMS create a text file and write data into it in the Server application folders?
Recently, I writed a programe about creating a text file and writing data into it in the server application folder. My code is as following:
var fileObj = new File("/MyApp/test.txt");
if( fileObj != null)
if(fileObj.open( "text", "append"))
fileObj.write( " ———— Chat Info Backup ————\r\n" );
fileObj.close( );
trace("Chat info backup document :" + fileObj.name + " has been created successfully!");
But when I run it, FMS throw the error as following: File operation open failed ; TypeError: fileObj has no properties.
Can you help me ? Thanks in advance.
Supplement: The text file named test.txt doesn't exist before create the fileObj, an instance of File Class.Is MyApp the name of the application directory, or is it a child of the application directory? If myApp is the app name, just use test.txt as the path flag in the file constructor.
Maybe you are looking for
-
How to create foreign key automatically?
I am writing to seek help, in regards creating foreign key automatically, when I insert data into my ''price'' table. I have 2 tables, one called prices and names. the relationship between them, if that one name can have many prices and one price c
-
What to check when comparing query performance in 2 envs
I have a query that executes in 1 sec in env A. Env A was initially was 9.2.0.5 and later upgraded to 9.2.0.6. The same query executes in 1 min 30 secs in Env B. Env A has always been on 9.2.0.6. The query plans and stats are same in both the environ
-
How do i change hp media smart photo?
dont get me wrong...i loooove windows 7, but i dont like viewing my pictures...is there a way to change it back to windows 6? that was MUCH easier to use!
-
Having an issue with iPhoto crashing on my MacBook Pro. Yesterday I upgraded to OS X Lion (10.7.3), then upgraded to iPhoto '11 (9.2.1) Error on Load: iPhoto has detected inconsistencies in your library. Please click Repair to avoid any potential pro
-
BO 4.0 LCM - Using the Override Settings Option
I am reading the LCM user manual and I am wondering: What is meaning of Using the Override Settings Option? I need to use LCM to move WebI reports and Universes from one environment to another and from one environment to a LCMBIAR file.