New Directory in Application server Required for data upload

Hi,
I need to load data in SAP application server. i will use CG3X to load the data.
I need to create a new directory in the application server to load all my flat files. Does any one know how to create a directoty?
Please provide list of steps and transactions used for creating this.
Thnks

Go to t-code FILE.
Click on Logical file path definition and hit the New Entries button
Enter your logical path name, say ZXXX
Go back to FILE
In the right window, click on the block on the left to highlight the line you just created.
Now double-click on Assignment of physical paths to logical path
Now click New Entries.
Select your syntax group (this is just your O/S)
Here you can enter your physical path.

Similar Messages

  • To create a new file in application server and transfer data to ti

    i am doing the following where i have to create a new file in application server and transfer data to tht file from an internal table.but its saying file cant be opened.the path i am giving to parameter p_prefil is /tmp/prachi.txt.
    wats the prob..can anyone help.
    DATA:L_WA_FINAL TYPE TY_FINAL,
         l_wa_string type string.
    OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
    if sy-subrc <> 0.
    write: ' file cannot be opened'.
    stop.
    endif.
    LOOP AT P_I_FINAL INTO L_WA_FINAL.
    move l_wa_final to l_wa_string.
    TRANSFER l_wa_string TO P_PREFIL.
    if sy-subrc <> 0.
    write: 'file can not be written'.
    stop.
    endif.
    clear l_wa_final.
    ENDLOOP.
    CLOSE DATASET P_PREFIL.
    if sy-subrc <> 0.
    write: ' file cannot be closed'.
    stop.
    endif.

    DATA:L_WA_FINAL TYPE TY_FINAL,
    l_wa_string type string.
    OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
    if sy-subrc ne 0.
    write: ' file cannot be opened'.
    stop.
    endif.
    LOOP AT P_I_FINAL INTO L_WA_FINAL.
    move l_wa_final to l_wa_string.
    TRANSFER l_wa_string TO P_PREFIL.
    write: 'file can not be written'.
    clear l_wa_final.
    ENDLOOP.
    CLOSE DATASET P_PREFIL.
    if sy-subrc ne  0.
    write: ' file cannot be closed'.
    stop.
    endif.

  • New Directory in Application server

    Hi,
    I need to load data in SAP application server. i will use CG3X to load the data.
    I need to create a new directory in the application server to load all my flat files. Does any one know how to create a directoty?
    Please provide list of steps and transactions used for creating this.
    Thnks

    Hi Sakthi Kumar,
    Also you can try below FMs
    GUI_CREATE_DIRECTORY
    WBMR_CREATE_APPL_FOLDER
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Problem to install Oracle Application Server, required for BI EE

    Hi all
    I want to install Oracle BI EE and it need OracleAS wich I can install from Oracle SOA suite (2nd choice of the installation type). But in the setup progression of AS, I had a message that the ORACLE HOME exist.
    I had an instance of SOA suite installed, but I have uninstall it and remove the oracle home from system variables.
    in my machine, I have : Windows Vista, Oracle database 11g, JDeveloper 10.1.3.3, Oracle 10 XE.
    Any help please !!!!

    The standard installation give me thoses features at the end :
    with the following features:
    Oracle Business Intelligence ODBC Driver
    Oracle Business Intelligence JDBC Driver
    Oracle Business Intelligence Systems Management
    Oracle Business Intelligence Server
    Oracle Business Intelligence Administration Tool
    Oracle Business Intelligence Cluster Controller
    Oracle Business Intelligence Scheduler
    Oracle Business Intelligence Client
    Oracle Business Intelligence Presentation Services
    Oracle Business Intelligence Presentation Services Plug-in and BI Office
    Oracle Business Intelligence Catalog Manager
    Oracle Business Intelligence Job Manager
    Oracle Business Intelligence Publisher
    and, there is no Answers ????

  • How to Raise alert in XI when a new file reaches application server

    Hey guys
    i have a requirement in which i need to trigger a piece of  ABAP code whenever a new file reaches a specific directory of Application server.
    i m using File adapter on receiver side and i want to raise a trigger so that the ABAP code is executed automatically whenever some new file reaches the directory
    we are running Win server
    thanx
    ahmad
    Message was edited by:
            Ahmad

    HI,
    It is possible to write a ABAP program to raise alert.and schedule it , In ABAP program we can check the file is existed or not in a specified folder if existes then we can raise Alert.Actually Alerts are maintained by SAP Alert Management only.
    So , but not clear , you said you are using the File receiver adapter .
    -- onoption is -this can bepossible with OS command .
    -- also we can raise alert from Payload itself , why becz i understand whenever you are going to write a file with file adapter then you need to raise an alert right?
    so if message is existed i mean data existed then from raise alert and store the file onoption
    -- Also you can try calling an ABAP program as the auto-reaction method of the MTE in CCMS
    Regards
    Chilla
    See the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/434fa590-0201-0010-1e9a-c27e6283a0fe
    SMS through SAP ABAP program
    XI Alert from BPM with Follow-Up Activity
    ABAP programming BAPI To XML
    How to send qRFC Alert to Internet Email from AP0 3.1 running 4.6D BASIS
    /people/gregor.wolf3/blog/2005/03/05/create-users-in-an-abap-system-with-bapi-ostermiler-java-utilities

  • How to create a directory in application server

    Hi all,
    How to create a directory in application server through Progaram??
    eg:\tmp - is already existing
    I want to create \tmp\fi 
    Within \tmp\fi - i should able to store my file,,,
    Kindly help me urgent...

    Hello San,
    Either contact Basis guys at ur end for the same or u can do it dynamically via a piece of ABAP code, i hope it wll help u.
    call function 'GUI_CREATE_DIRECTORY'
         exporting
    dirname = '//<ip_address>/qfilesvr400/<host>/usr/sap/TST/SYS/Folder1'
         exceptions
              failed  = 1
              others  = 2.
    Reward If Helpful.
    Regards
    Sasidhar Reddy Matli.

  • Display application server time and date on GUI screen.

    Hi experts,
       My client's requirenment is to display the application server time and date on the on GUI screen
       pls give the step by step procedure.
    Thanks in advance.
    Abhishek

    Hi,
    For TIME purpose,
    Fixed Length  6
    Format  u2018HHMMSSu2019
    DATA  times  TYPE  T.
    times  =  sy-uzeit.
    WRITE  times.
    For DATE purpose
    Fixed Length  8
    Include Representation  u2018YYYYMMDDu2019
    DATA  today  TYPE  D.
    today  =  sy-datum.
    WRITE  today.
    today  =  u201819991231u2019.
    WRITE  today.
    Regards,
    Anki Reddy

  • Server Requirement for Installing BPC

    Dear all,
      What are the minimum server requirements for installing BPC in RAM, Speed and hard disk size? Is there anything else that i should be aware of?
      Thanks in advance for your help.
    Cheers

    Hi,
    If you are going to use Audit Collection Services (other methods to collect event logs can also refer to requirements below), here are some requirements:
    A member of an Active Directory domain
    A minimum of 1 gigabyte (GB) of RAM, with 2 GB recommended
    At least a 1.8 gigahertz (GHz) processor, with a 2.8 GHz processor recommended
    10 GB of hard disk space available, at a minimum, with 50 GB recommended
    More information for you:
    Collecting Security Events Using Audit Collection Services in Operations Manager
    https://technet.microsoft.com/en-us/library/hh212908.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Creating Directory in Application Server

    Hi Friends,
    Can anyone help me on,
    How to create directory in application server.
    Also, I need to create one file in this directory with fixed name, how do we do that?
    Also, tell me how to use transaction FILE in detail...
    I am working on CRM and there is no transaction CB3Z ...
    Kindly help.
    Good answers will be rewarded...
    Cheers!
    Pradeep

    Hi Pradeep
    Refer the Links:
    <b>Creating a directory & subdirectory on Application Server
    API for creating a directory in the application server
    Regards,
    Sree

  • Directory in application server has multiple flat files

    Hi
    How should we know that the Directory in application server has multiple flat files.
    my requirement is, daily my program runs in batch at night. So, i  have to know are there more than 1 flat file existing in the directory.
    regards
    mac

    Try this FM,
      CALL FUNCTION 'SUBST_GET_FILE_LIST'
        EXPORTING
          dirname      = ws_filepath
          filenm       = ws_fname
        TABLES
          file_list    = i_rsfillst
        EXCEPTIONS
          access_error = 1
          OTHERS       = 2.
    Pass the path and
    say ur file name starts with ALPXXXXX
    then pass
    ws_fname =  'ALP*' .
    In the table i_rsfillst you will get all the file in directory.
    Try this through a sample prorgam ,dont try through SE37, it will show ACCESS_ERROR.
    Regards,
    Message was edited by: sreejesh purapadiath
    Message was edited by: sreejesh purapadiath

  • I have started migration système to transfert from hold Macbook pro to New MacBook air application starter successfully for several hours. But since more than 3 hours I got the message transferring Time zone paramètres with time left less than 1 minute.

    Hi
    I have started migration système to transfert from hold Macbook pro to New MacBook air
    Application starter successfully for several hours.
    But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
    Any recommendation or suggestion to solve it ?
    Many tanks

    If it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If  you're interested here is an article explaining Setup Assistant tips.
    Roger

  • Directory content application server

    Hi,
    Is there any function module present of getting the contents of directory at application server ?
    Thanks,
    Amit R.

    Hi Amit,
    Use the below function module
    F4_DXFILENAME_TOPRECURSION

  • What are the minimum hardware Server requirement for SAP BI BO

    I would be thankful if someone can please tell me  What are the minimum hardware Server requirement for SAP BI BO. if a separate Desktop is used for the server or local server purpose.
    In the Desktop
    I have 8 GB RAM
    2.60 Ghz Processor ( CPU)
    System type: 64 bit OS
    regards
    ranendra

    Hi,
    Refer the attached PAM for BO 4.0 and 4.1.Minimum hardware details are listed there.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0134dbb-8f10-3010-5084-cf90dbb35284?QuickLink=index&overridelayout=true&58879706677537
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
    I haven't try with your similar specification but  in the below link some one tried with similiar one.
    What are the minimum system requirements to install SAP BO 4.0/4.1
    Amit

  • How to schedule Job for data uploading from source to BI

    Hi to all,
    How to schedule Job for data uploading from source to BI,
    Why we required and how we do it.
    As I am fresher in BI, I need to know from bottom.
    Regards
    Pavneet Rana

    Hi.
    You can create [process chain |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?quicklink=index&overridelayout=true]for data loading pocess and schedule start process to any time/date etc ...
    Regadrs.

  • Hello !  pls give some ti[ps how to use bapi's for data uploading?

    hello !
      pls give some ti[ps how to use bapi's for data uploading?
    regards,
    Arjun

    Hi,
    See the below report extract:
    where it_data is having uploaded data.
    LOOP AT<b> it_data</b> INTO wa_data.
        line_count = sy-tabix.
        "Date Validation
        CONCATENATE wa_data-uplft_date4(4) wa_data-uplft_date2(2) wa_data-uplft_date+0(2)
        INTO wa_data-uplft_date.
        "READ TABLE it_ekko INTO wa_ekko WITH KEY lifnr = wa_data-vendor.
        LOOP AT it_ekko_temp INTO wa_ekko_temp WHERE lifnr = wa_data-vendor.
          IF wa_ekko_temp-kdatb <= wa_data-uplft_date AND wa_ekko_temp-kdate >= wa_data-uplft_date.
            MOVE-CORRESPONDING wa_ekko_temp TO wa_ekko.
            APPEND wa_ekko TO it_ekko.
          ENDIF.
        ENDLOOP.
        "IF sy-subrc = 0 AND wa_ekko-kdatb <= wa_data-uplft_date AND wa_ekko-kdate >= wa_data-uplft_date.
        LOOP AT it_ekko INTO wa_ekko.
          wa_data_header-pstng_date = wa_data-uplft_date.
          wa_data_header-doc_date = sy-datum.
          wa_data_header-bill_of_lading = wa_data-bill_of_lad.
          wa_data_header-ref_doc_no = wa_data-del_no.
          CONCATENATE wa_data-header_text1 '-'
                      wa_data-header_text2 '-'
                      wa_data-header_text3 '-'
                      wa_data-header_text4
                      into wa_data_header-HEADER_TXT.
          IF wa_data-indicator = 'Y'.
            wa_data_item-material = '000000000000200568'.
          ELSE.
            wa_data_item-material = '000000000000200566'.
          ENDIF.
          LOOP AT it_ekpo INTO wa_ekpo WHERE ebeln = wa_ekko-ebeln AND matnr = wa_data_item-material.
            "Collect Item Level Data
            wa_data_item-plant = '1000'.
            wa_data_item-stge_loc = '1001'.
            wa_data_item-move_type = '101'.
            wa_data_item-vendor = wa_data-vendor.
            wa_data-qnty = wa_data-qnty / 1000.
            wa_data_item-entry_qnt = wa_data-qnty.
            wa_data_item-po_pr_qnt = wa_data-qnty.
            wa_data_item-entry_uom = 'KL'.
            wa_data_item-entry_uom_iso = 'KL'.
            wa_data_item-orderpr_un = 'KL'.
            wa_data_item-orderpr_un_iso = 'KL'.
            wa_data_item-no_more_gr = 'X'.
            wa_data_item-po_number = wa_ekpo-ebeln.
            wa_data_item-po_item = wa_ekpo-ebelp.
            wa_data_item-unload_pt = wa_data-unload_pt.
            wa_data_item-mvt_ind = 'B'.
            APPEND wa_data_item TO it_data_item.
            CLEAR wa_data_item.
          ENDLOOP.
          CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
            EXPORTING
              goodsmvt_header = wa_data_header
              goodsmvt_code   = goodsmvt_code
              testrun         = 'X'
            TABLES
              goodsmvt_item   = it_data_item
              return          = return.
          READ TABLE return INTO wa_return WITH KEY type = 'S'.
          IF sy-subrc <> 0.
            DESCRIBE TABLE return LINES sy-tfill.
            IF sy-tfill = 0.
              CALL FUNCTION <b>'BAPI_GOODSMVT_CREATE'</b>   
            EXPORTING
                  goodsmvt_header = wa_data_header
                  goodsmvt_code   = goodsmvt_code
                  testrun         = ' '
                TABLES
                  goodsmvt_item   = it_data_item
                  return          = return.
              CALL FUNCTION <b>'BAPI_TRANSACTION_COMMIT'</b>
               EXPORTING
                 WAIT          = 'X'
              IMPORTING
                RETURN        =
            ENDIF.
          ENDIF.
          LOOP AT return INTO wa_return.
            WRITE: 'Messsage TYPE  ', wa_return-type,
                  /,'ID  ', wa_return-id,
                  /, 'Number  ', wa_return-number,
                  /, 'Message  ', wa_return-message,
                  /, 'Long Text  ', wa_return-message_v1,
                                    wa_return-message_v2,
                                    wa_return-message_v3,
                                    wa_return-message_v4,
                 /, 'Failed at line', line_count.
          ENDLOOP.
          CLEAR: wa_ekko, wa_ekpo, wa_data, it_data_item[], wa_data_header.
        ENDLOOP.
    Reward if useful!

Maybe you are looking for

  • Credit memo print preview problem

    Hi Friends, The present process is return sales , in which return sales order created with reference to sales order, Credit memo request created and Credit memo also created.But the problem is not getting print preview.Error message is Excise invoice

  • Problem with highlighting texts in Adobe Reader X

    i've a problem with the highlighting tool, it can only highlight one word at a time, it isn't possible for me to drag and highlight. i've tried updating but to no avail. in addition, i can't use the snapshoot tool either. basically any function that

  • Base URL changed to HTTPS, but trying to download an protected PDF claims using (unsecure) HTTP

    Tried to configure an policy in contentspace to protect native PDF-files by Rights Management. Downloading such an file gave an error-message like (translated from german): "Acrobat-Security: you are trying to connect to an Adobe liveCycle Rights Man

  • Mystery markings at the end of the road- next to a...

    Hi, Have noticed some mystery markings at the end of the road, right next to BT's current equipment. Markings measure approx 1.2m x 45cm Infinity is due to be enabled on 1/03/2012 so looks like BT might have started the rollout. Exchange is Kempston

  • Getting an error when upgrading xcode

    hi currently,im getting an error when im trying to upgrade xcode from my mac to the latest version. the erros is like this: the product distribution file could not be certified. it may be damaged or was not signed. it happen when i trying to upgrade