New Page After if PageNumber mod 2 = 0 not working

My report needs to print on both sides of the paper, but one of the subreports that it calls must always start on the front, not the back, side of the page.  The subreport is in a subfooter (Group Footer #3e), so I have a 'dummy' subfooter (Group Footer #3d) before it, with a formula stipulating New Page After if PageNumber mod 2 = 0.  Since this doesn't seem to work, I also have a formula in Group Footer #3e stipulating New Page Before if PageNumber mod 2 = 0.  Still doesn't work - it just merrily starts the subreport on the even-numbered page.  If I print PageNumber in Group Footer #3e, (above where the subreport is invoked), it does display the even page number, so the formula should be forcing it to throw the page.  This even-page-throwing formula works just fine in other parts of my report and within the subreport itself.  Any ideas why it's not working in this particular case?

Not sure I follow your design but I think what I would do is to use New Page Before for both the subreport section and the section preceding the subreport section.  I would use New Page Before all the time before the subreport section, and conditionally for the preceding section using the PageNumber mod 2 expression.
Fuskie
Who has a suspicion he is suggesting what you already tried but is not sure...

Similar Messages

  • New page after end of record

    Hi i'm using asp.net 2.0,VS 2005 and CR by default comes with VS 2005.
    I read the records from DB and bind into CR for 10 pages. It's displaying records at 10 pages but the 11th page has created and nothing is there. I dont want to create the extra page after records end.
    How to solve this?

    On crystal report, open the section expert.  Go to the section that states "New Page After" and click on the X-2 button next to it".  In the formula editor, type Not OnLastRecord.  That will tell the report not to go to a new page on the last record.
    Good Luck
    Cathy

  • How to use a formula for dynamic New Page After?

    There is a formula for dynamic New Page After.
    How do I get value of formula?
    I am using RAS and the ReportClientDocument.

    There is a section object.  Off that there is a format property that is of type sectionformat.  From there there is a ConditionFormulas property which I believe is a collection of all the formulas you can set for a section.

  • I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit  mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond.   The only thing I can come u

    I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit  mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
    The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

    The blog was incorrect. Photomerge should work in the trial, too.
    When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

  • How can I stop Firefox from asking me whether to share my location every time I visit a new page, after I've repeatedly answered Never Share My Location?

    How can I stop Firefox from asking me whether to share my location every time I visit a new page, after I've repeatedly answered Never Share My Location?

    You can also manage all permissions on the about:permissions page via the location bar.<br />
    Use "All Sites" to set the defaults.
    You can open about:xxxx pages via the location bar like you open a website.<br />
    Firefox uses the about: protocol to access internal Firefox (setting) pages.
    *http://kb.mozillazine.org/About_protocol_links

  • Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling :(

    keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling
    I recently bought some new albums and can't play them on my ipod

    I just encountered the same problem on my 2 month old MBPro.  I found a work around by changing USB ports.  As for the actual cause or the reason why that worked, I dont know.  The USB port I was using works fine with my phone or other USB devices.

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Wmii newbie: mod-p and mod-a not working, and keyboard layout change

    like topic says... i have issues with mod-p and mod-a not working (they dont' display anything at all...)
    also: how do i change the keyboard layout in wmii?
    sorry for asking all of this, but was just trying to run wmii in hum, i guess 1 hour? i really do like it, but i cannot find any help nor hint on the official page or the man page...

    this is my actual wmiirc_local
    MODKEY=Mod4
    EXPORT WMII_FOCUSCOLORS=('#ff7700' '#111111' '#ff7700')
    EXPORT WMII_BACKGROUND='#333333'
    EXPORT WMII_NORMCOLORS=('#000000' '#ffffff' '#666666')
    EXPORT WMII_FONT='-*-*-*-*-*-*-12-*-*-*-*-*-*-*'
    EXPORT WMII_TERM="terminal"
    EXPORT status() {
    echo -n ' Eth0:' $(iwconfig eth0 | sed 's/ /\n/g' | grep Quality) '|' $(acpi -b | sed 's/.*, \{0,2\}\([0-9]\{1,3\}%\),.*/Bat: \1 | /') ' Core MHz:' $(cat /proc/cpuinfo | grep 'cpu MHz' | sed 's/.*: //g; s/\..*//g;') '|' $(uptime |sed 's/.*://; s/,//g') '|' $(date)
    and it's still not working, except for modkey. when i was using wmii instead of wmii-hg, this file worked fine... sigh
    Last edited by samuele.mattiuzzo (2010-01-21 11:21:53)

  • HT1766 my ipod is disabled, and the recovery mode is not working. what should i do?

    my ipod is disabled, and the recovery mode isn't working. what should I do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. Try more than once. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Try another cable
    Try on another computer

  • Satellite C850D-115 / Win7 - the special funktion key mode ist not working

    Hi,
    the special funktion key mode ist not working, although I tried everything in Bios and softare " Toshiba Hardware setup utility".
    I still need to press "FN + " to use the special function keys, while enabled bios mode!
    The special function mode was never working, I have no more ideas. You...?

    As far as I know its no matter what system you are using. The special function key mode should work with Win 7 and Win 8.
    Here an Toshiba documentation.
    [How to change the Function Keys Mode|http://aps2.toshiba-tro.de/kb0/HTD2503B90001R01.htm]
    You bought this notebook without an preinstalled system. Right?
    And you installed an clean Win 7 on this Satellite C850D-115?
    Please ensure that all available drivers for C850D PSC9UE are installed. This includes the VAP (value added package), Hardware Setup, and others
    There is also new BIOS update v6.50-WIN
    Be sure your BIOS is up to date!

  • I have downloaded skype, but after synchronizing with itunes skype not working, why?

    i have downloaded skype, but after synchronizing with itunes skype not working, why?  when I was synchronizing I believe there was some message in itune saying software not backed up or somethin to that effect.

    Thanks for your response.
    However, I did not find any solution to my problem.
    in my phone the skype application skype is not opening up, same is the caseiwth mobile voip. Both these applications were downloaded last night and it worked then, but not working now.
    Thanks in advance for anyone willing to help. I am new to the iphone.

  • Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

    Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

    Yes hello,
    My widgets are not working as well, i looked on forms and it seams that the 10.5 update fix there problems. I also did an archive and install from 10.4... One of the major reasons i purchased the upgrade was to use widgets to clip parts of safari, i'am totaly bummed because all forums i find end with the question un answered. i'am a little bummed becuase there are a couple of things that worked with 10.4 that are not working in 10.5 (like some meg moives not playing.
    i do not wish to create a new account because i do not want to reinstall all my software, photoshop, final cut, dvd studio pro.. etc.
    i hope to find the fix some how.
    I have opened up the console application and when i select widgets load or delete them i see no activity in the console. I'am not familiar with the console app. or command lines.
    is there any more info on this matter? is there any support from apple?
    Thankyou

  • How can I transfer songs from my iPhone 4 to my new mini iPad.  My PC is not working.

    How can I transfer songs from my iPhone 4 to my new mini iPad.  My PC is not working.

    if they're songs you purchased from itunes go to the itunes store on your ipad, go to purchased, and download from there.

  • I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

    What it says in the title.
    I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
    Now it won't turn back on. It plays the start up music but the screen stays blank.
    The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
    I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
    From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
    Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
    This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

    kodemage wrote:
    well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
    I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
    Good luck.

  • I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate? I am in Delhi, India.

    Hi,
    I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate it? I am in Delhi, India.Any suggestions.
    Satish

    would be best if you can download the guide here
    http://support.apple.com/manuals/#iphone

Maybe you are looking for