Nissan/Infiniti cars use Clarion L42A for Bluetooth - please fix the Pre!!!
ATTENTION PALM:
I have contacted Nissan USA's Consumer Affairs. They have a dedicated area for Bluetooth set-ups on Nissan & Infiniti cars. You can reach them through (800) NISSAN-1 (or 800-647-7261) and ask for the Bluetooth Set-up line.
Almost ALL Nissan & Infiniti cars use the same controller for Bluetooth. It is the Clarion LT42A, Bluetooth version 2.1.1. It is the compatability problem between the Pre and this unit which is causing the static and dropped calls.
You now have the information that you need to resolve this issue. STOP GIVING US THE RUN-AROUND!! FIX THIS PROBLEM!!!
Post relates to: Pre p100eww (Sprint)
If you are having a Bluetooth problem with the Palm Pre, we need to join together and turn this into a social campaign:
* Call Palm’s Technical Support line at 1(866)750-7256 and ask for a “Level 2 Specialist” and file a complaint.
* Create new threads on the Palm Forum about all Bluetooth problems!
* Talk about it on blogs, Facebook, Myspace & Twitter … anywhere and everywhere!
The louder we get, the faster Palm will acknowledge the problem and fix it!!
http://blog.photoframd.com/2009/07/27/palm-pre-has-bluetooth-problems/
Similar Messages
-
I havent used my ipod for sometime and forgotten the 4 digit passcode what can i do
i havent used my ipod for sometime and forgotten the 4 digit passcode what can i do
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document.
copied from: http://support.apple.com/kb/HT1212 -
Cannot view XML input using XSL style sheet. Please correct the error and..
Hi All,
Scenario XML to IDOC.
The interface determination decides whether to create IDOC X or IDOC Y based on a xml segment value.
I have an error in the SXMB_MONI:
<!-- Interface Determination
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem extracting values from the Payload: Check line 2 column 1 of the XML document</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
From the SXMB_MONI, the inbound message payload is truncated with an error:
- <ProductIdentification>
<GlobalProductIdentifier />
- <PartnerProductIdentification>
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The following tags were not closed: Pip3B12ShippingOrderConfirmation, ShippingOrder, ShipmentLineItem, isContainsHazardousMa...
"> <GlobalPartnerClassificationCode />
<ProprietaryProductIdentifier>000000000000101369</ProprietaryProductIdentifier>
</PartnerProductIdentification>
</ProductIdentification>
- <QuantityInformation>
- <confirmedQuantity>
<ProductQuantity>1.00</ProductQuantity>
</confirmedQuantity>
I've checked that the xml format is OK.
As a matter of fact, if I try to resend the xml file from directory, the message is processed correctly and the payload shows all the xml file.
Thanks.
Daniele
Edited by: Daniele*Verdone on Feb 1, 2010 11:22 AM
Edited by: Daniele*Verdone on Feb 1, 2010 11:23 AMHi Suraj,
That option is not available in FTP mode..
This option is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.
Yes, you're right !!
Are you sure that the message is not getting picked in half-way
Now, at this time, I can't see the XML data in the CC monitoring because the tool shows only the recent polling execute in the last 10 minutes. If the error recurs, I will check the payload of CC.
How can I solve the problem with reading incomplete file (FTP mode)?
...Meanwhile I will try with Full cache refresh.
Thanks
Daniele -
I own a iPhone 2G Today
He underwent updated Software
He gave me this message
"The SIM card inserted in this iPhone does not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.
I did not know what to do??Follow this article: iPhone: Troubleshooting No Service or No SIM
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No SIM" when a SIM card is installed.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance. -
The SIM card inserted in this iPhone does not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.I got the same message.
I bought an iPhone 5 at full retail price from an AT&T store. I requested the phone to be unlocked through their unlock portal. The AT&T unlock system asked for the IMEI number, a copy of my receipt showing that I bougth the phone at "No Commitment" price. A few hours later I received a message from AT&T stating that the unlock request was approved. I then followed the instructions to back up the phone and restore it through Itunes. The phone activates normally with the AT&T SIM card. But when I insert my VODAFONE SIM I get the massage "THE SIM CARD... etc.
I tried again to back up & restore the phone 3 or 4 times, no success. I have also allowed 24 hours for the unlock process to complete. Still no luck.
I have checked again on the AT&T Unlock Status portal and it shows "Unlock approved".
Where is the issue here? Do I have to call Apple or return the phone to AT&T and get the unlocked phone through the Apple Store?
Thanks for any help on this. -
Can you use 2 sets of bluetooth headphones at the same time with the Ipad 4?
Hi, I was wondering if anyone could tell me if I can use 2 sets of bluetooth headphones at the same time with the Ipad?
It is so my children can watch a film or listen to music together.
ThanksNo
-
When you open iTunes this message appears. The sim card inserted in this iPhone does not Appear to be supported. Only compatible SIM cards from a supported Carrier may bre used to activate iPhone. Please insert the SIM card That came with your iPhone or visit a supported Carrier's store to receive a replacement sim card.
dear sir.
where i get this replacement sim card.i live in bangladesh.not have support carrier in my coutry..
so how get..please help me.. -
The SIM card inserted in this iPhone does
not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used
to activate iPhone. Please insert the SIM card that came with your
iPhone or visit a supported Carrier's store to receive a
replacement SIM card.It appears that you have an iPhone that is locked to a carrier other than the one you were using. Now that you have tried to update the iOS, it has relocked. That is what happens if you are using a phone that has been hacked to unlock. You have also forfeited support from Apple and from this forum.
-
How LONG I'll need to wait for Apple GENIUS fix the incompatibility
I need to work....How LONG I'll need to wait for Apple GENIUS fix the incompatibility # KEYNOTE and LION???
What is the best thing I've to do???
Downgrade the OS??? Change the Plataform????Each region has little differences that need to be changed and setup in order for it to work on your phone correctly. Just need to sit and wait...
Nokia 5800 XpressMusic Red V52.0.007
Hit the Kudos if I helped! -
Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox -
I forgot about slow download speed's negative effects... hence (I think) the videos I downloaded stop in the middle. I can get a better download speed if I connect directly to LAN. Is there anyway for me to fix the videos previously purchased or re download them without having to re purchase them? I'm attempting to play the video's directly from iTune "purchased" folder on my Win7 Home Premium PC.
Never mind.. I found instructions on how to re download purchased items. I only need help downloading 2 more items. I love the attention I've recieeved (I guess silly questions go unoticed... sigh)
-
Unable To Use DVDSP4 Presets for HD-DVD in the H.264 Format
I recently prepared a 23 minute slide show using Fotomagico from high resolution Hasselblad slides scanned in at 1200 dpi. Within Fotomagico I rendered the Fotomagico slide show to Apple ProRes 422 HQ, took it into Final Cut Pro 6.03 and added an intro and closing section. I then sent this to Compressor and selected the 30 minute HD-DVD preset which uses mpeg2. All went fine with the encoding to mpeg2 and I got a successful build and format out of DVDSP4 after importing the resulting .m2v file into DVDSP4. However, while the disk plays back fine in my Mac Pro it plays back with stuttering (audio and video) on my Toshiba HD-A2 HD-DVD player. I used a Verbatim Datalife DVD+R, but several other discs from other manufactuers including a DVD-R disc showed the same problem.
Please note that I have the latest firmware on my Toshiba HD-A2 and I have successfully burned RL HD-DVD discs using my PC and Windows software (Ulead's DVD Movie Factory 6+) which play fine without stuttering on my HD-A2.
I then decided to send the project to Compressor and use the 60 minute HD-DVD preset that encodes to H.264. Once again Compressor successfully executed the encode of my 23 minute slide show and it plays fine in QuickTime or MPEG StreamClip. However, every time I try and import this .mov file encoded in H.264 using the Compressor preset for HD-DVD into DVDSP4, DVDSP4 brings it in to the assets folder, but after a couple of seconds DVDSP4 crashes. Using console I get a message that DVDSP4 quit unexpectedly due to a "segmentation fault".
I also tried to take the ProRes Fotomagic project in Final Cut Pro 6.02 and send it out with Quicktime Conversion using the H.264 codec. Again I have a file that plays fine in QT, but when I try and import this .mov file into DVDSP4, I get the message "imcompatible format".
In summary, I am completely frustrated after many many hours of work at trying to prepare an HD-DVD on red laser of my slide show in DVDSP4. I cannot figure out what I am doing wrong, and I would be most appreciative of any suggestions anyone may have.
Thanks in advance.
TomAm I the only person who has ever tried to use the Presets in Compressor 3 for encoding HD-DVD disks? I would like to use these presets for burning HD-DVD's to standard red laser media as I have done on my PC. With the mpeg2 Preset I can get nothing but stuttering video when played back on my Toshiba HD-A2 and when I use Compressor 3 to encode with either of the H264 presets, the resulting .mov file causes DVDSP4 to crash when I import the file. Has no one else experienced this? Does anyone have any thoughts on addressing these issues other than to go back to working on my PC?
Tom -
Diary of my painful attempts to use a program for which I have the license
Hi: I will summarize my painful experience with Excelsius 2008 in the following diary
4-2011:
Excelsius 2008 is working OK in the computer where it is installed.
(5 months pass by)
9-2011:
Excelsius 2008 shows that there is a "mising or inactive" license and it does not run.
We contact SAP to get information on how to solve this issue.
Many emails go back and forth. Next goes an excerpt of one of them:
10-11-2011:
"I have tried to reinstall and then run the update. I still receive the same error message. I went into control panel> add/remove programs>xcelsius 2008 to try and repair it and I receive the same error message. Its strange that even when I try to remove it the program I receive the error message. Help?"
10-20-2011:
I am trying to reinstall my Excelsius 2008. The program is looking for a file called "xcelsius.msi" but it doesnot locate it. I direct the path to the place where the file is located. The program tells me that is not the one I am supposed to find.
I cannot unistall the program. I cannot use it either.
10-21-2011:
I try to install the program from scratch in another computer following instructions given by SAP.
The program asks for key code activation. Enter the 26 characters string of data and program says that activation key code is not valid.
Try replacing the 0 for O, in all possible combinations, same message is displayed.
I need to use Xcelsius 2008 for my work, I have a valid license, and the program is not working.
Can anybody help??
Thank you,
extremely unhappy customerMaiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things. -
HT1420 I've not used my iMac for some time and the password has been forgotten. How do I re-start?
I bought the iMac some 18 months ago and it was set up be a system administrator who has since left the company. I want to start using it again, but no-one knows the password.
I've tried inserting the Install DVD but the system immediately asks for the original password.
How do I overcome this?Hi Paulfromhkg,
Welcome to the Support Communities!
Your post indicates you are using Snow Leopard on your iMac.
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Mac OS X 10.6: If you forget your administrator password
http://support.apple.com/kb/PH6317
Cheers,
- Judy -
Using 1 dataset for multiple tables in the report
All,
Say I have a stored procedure with some parameters and the result set looks like this:
State ACount BCount Description
VA 10 20 Category1
TX 15 25 Category1
VA 30 40 Category2
TX 40 50 Category2
NY 5 5 Category3
NJ 10 10 Category3
Now, what I want is 3 separate tablixes (tables) in my report using my stored procedure (just 1 dataset for all these tables). I want the result to be dispalyed something like this:
Category1 (1st tablix)
State ACount BCount Description
VA 10 20 Category1
TX 15 25 Category1
Category2 (2nd tablix)
VA 30 40 Category2
TX 40 50 Category2
Category3 (3rd tablix)
NY 5 5 Category3
NJ 10 10 Category3
I want Category1, Category2 and Category3 to be 3 different tablixes in my report using the same stored procedure.
How can I accomplish that? Let me know if you have any questions.Hi SqlCraze,
I also design the report using Report Designer. So you can directly do the same steps as I post.
In the fourth step that "Insert the corresponding fields to the second table" means directly insert State, ACount, BCount and Description fields. Please note that the list control is used to split one table into several tables based on the
Description group: one table only displays the values when Description=Category1, one table only displays the values when Description=Category2, another table only displays the values when Description=Category3. We needn't add filters in the table, just add
the list.
For more information about the list control in Reporting Services, please refer to the following blog:
http://blogs.technet.com/b/microsoft_in_education/archive/2013/03/09/ssrs-using-a-list-item-to-display-details.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
Problem in deadline monitoring of batches
Dear experts, Deadline monitoring of batches (transaction QA07) is not working. I tried running this but it did not post stock of a batch whou2019s expiry date was in next 2 days in blocked stock. I had specified the material no, plant, initial run i
-
I just bought an Apple TV 2 and am trying to hook it up to a VGA projector to Airplay stream my mirrored iPad. What is the best converter from HDMI to VGA?
-
How can I reduce the size of IPhoto ?
I have tested IPhoto with a few hundred pictures. I do not find this software very user-friendly, in particular because I can no longer locate the files of these pictures. I kept fortunately a copy of my complete set of my photo collection. I removed
-
Won't recognize firewire for audio interface
I am trying to run a Focusrite Saffire Pro 14 through the firewire port on my brand new Macbook Pro, only problem is that the computer is not recognizing the device. I've been at this for a really long time now and I havent the slightest clue on how
-
Not sure where to post this topic. Our church is interested in live streaming video. Reading article on using iweb and Apple Streaming and Apple broadcaster. Sounds too simple so asking for advice. Considering purchase of G5 MAC for this with X serve