No Adobe Form Is Assigned to the Scenario -ERROR

Hi All,
I configured the ADS server and was able to display the test Adobe Forms and test the forms successfully in ECC and Portal side.
(We are using ERP 2005 and EP 7.0 of NW2004s)
However when I tried to test the PCR forms in MSS, I get the following error.
Also I WAS ABLE TO DISPLAY the  forms when I had SAP_ALL autorizations at the backend ECC system. But when I remove the SAP_All and provide with all the ESS/MSS authorization with all the needed RFC authorizations, I'm  unable to display the forms. Can anyone please help me resolve this issue.
<b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario</b>
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1819)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:935)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:373)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:699)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:294)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1178)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:386)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:546)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:215)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowForm.onBeforeOutput(InternalVcISRShowForm.java:412)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowFormInterface.onBeforeOutput(VcISRShowFormInterface.java:137)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface.onBeforeOutput(InternalVcISRShowFormInterface.java:136)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface$External.onBeforeOutput(InternalVcISRShowFormInterface.java:212)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:654)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:619)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:474)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:87)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseEvent(FPMComponent.java:1038)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseEvent(FPMComponent.java:1250)
     at com.sap.xss.hr.pcr.selectform.VcPcrSelectForm.toShowForm(VcPcrSelectForm.java:227)
     at com.sap.xss.hr.pcr.selectform.wdp.InternalVcPcrSelectForm.toShowForm(InternalVcPcrSelectForm.java:190)
     at com.sap.xss.hr.pcr.selectform.SelectForm.onActionToShowForm(SelectForm.java:143)
     at com.sap.xss.hr.pcr.selectform.wdp.InternalSelectForm.wdInvokeEventHandler(InternalSelectForm.java:172)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:731)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:667)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:879)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1291)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:831)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks,
Regards
Madhu

Hi Madhu,
Please check if ICM is configured properly through the transaction SMICM.
please refer the thread -  Re: ISR service error :No Adobe Form Is Assigned to the Scenario...
Do update, onceyou have solved the solution.
Thanks and Regards,
Anto.

Similar Messages

  • ISR service error :No Adobe Form Is Assigned to the Scenario...

    Hi Gurus,
    I am getting this error when I try to run any of the ISR based scenarios like Code of Conduct service, PCR etc..
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1948)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1042)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:459)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:798)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
         at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:215)
         at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowForm.onBeforeOutput(InternalVcISRShowForm.java:435)
         at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowFormInterface.onBeforeOutput(VcISRShowFormInterface.java:137)
         at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface.onBeforeOutput(InternalVcISRShowFormInterface.java:136)
         at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface$External.onBeforeOutput(InternalVcISRShowFormInterface.java:212)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:602)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:568)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
    Pls do let me know how to solve this problem.
    I tried the configuration checks in the manuals..
    The Webservice check returned the correct version of the Adobe version running..
    But the program test FP_PDF_test_00 retuen an SOAP error..
    I have maintained detinations in the java visual admin
    with url : http://abapserverhostname:8000
    and user as ADS_AGENT password as in abap system.
    Pls tell me how should I solve my problem.
    helpfull answers will be greatly awarded...
    Regards,
    Ramesh

    Hi Raja,
    the basis have solved the problem and the configuration checks for ADS are succesful now.
    Now i try to create change the code of conduct application iview change the name space to
    sap.com/pcgui~isr(dont mind the spelling i have given the right component)
    application name= IsrForm
    application parmetrs = (given according to older thread messages)
    but nothing is coming up. I get the Ie message saying
    Security settings does not allow page to be displayed correctly and only a "cross" icon is appearing at the top of the page..
    Pls tell me what should i do now..
    Regards,
    ramesh

  • No Adobe Form Is Assigned to the Scenario

    Hi Experts,
    i am getting following error in the PCR application in MSS
    "No Adobe Form Is Assigned to the Scenario"  
    we are on ECC 6.0 EP 7.0 MSS BP 1.0
    we have configured ADS. and the service is running properly in development and quality server.
    I have checked the SPRO nodes Define scenarios and all.
    there i have assigned my z form name correctly to the scenario.
    i did check the blog in the portal development which points to the same error but it is unanswered.
    my ADS is running fine as i am able to my other adobe form developments correctly.
    please guide on the error i am just clue less on this.
    Regards,
    Umesh Chaudhari

    Hi Umesh,
    Please follow the steps mentioned in the notes below.
    959462    ISR/Adobe/Web Dynpro Java: Configuration problems
    836174    ISR/Adobe/Web Dynpro Java: Support for troubleshoot
    Hope the above steps should help.
    Best Regards,
    Deepak...

  • No Adobe Form Is Assigned to the Scenario:  - PCR

    Hi,
    In my project, configured 5 Custom PCRs as copy of standard PCR and enhace it. When Full authorization USer ids, am able to execute the all PCR-Adobe form and complete the process.
    When i logo to portal with Z role authorization (with respect to Client), am bale to execute only 3 PCR and remaining 2 PCS display the following error message.
    Critical Error
    A critical error has occured. Processing of the service was terminated. Unsaved data has been lost.
    Contact your system administrator.
    No Adobe Form Is Assigned to the Scenario   
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1981)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1043)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:460)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:799)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:381)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
         at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:216 
    Provide your inputs pls

    Hey Hi,
    IF you are familiar with authorizations in PFCG trabsaction you are finaliar with S_DEVELOP if not ask the authorization team on your project.
    Basically this authorization object handles the read/write etc authorization related to devlopment objects. If you implement Adobe forms you will probably develop your own forms or at least copy the SAP forms to customer namespace.
    For Adobe you will therefore have 2 custom development objects (1 for the form and 1 for the interface that is automatically generated). The end-user shoulf have at least READ access to these objects. If not the portal will trow an error on this.
    To determine the tech names of the objects find the form and related interface in transaction SFP. These should be inserted in the object S_DEVELOP in the role for the end users.
    You may want to consider to put the value Z* in the object which will give authorization for all the custom developed objects.
    If you can't find the object reply again and i will send a screenshot.
    Finally, make use of the splended transaction ST01!! It will make your life a lot more easy in portal! It traces all the authorizations needed and missing for any user you specify. After activating the trace and running a portal scenario the log will tell you want went OK and what not on an authorization object level.

  • Com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned

    Hi Portal Experts,
    We are using Interactive Adobe Forms for an ISR Scenario running on  EP7.0 NW04s, SAP R/3--ECC6.0
    It is working fine from longtime but suddenly i dont know why it is not working now.throwing an FPM Runtime Exception, Recently our R/3 server was refreshed and we found that J2EE stack is down on the R/3 which is used by ADS to run the adobe forms, then our Basis team up the J2ee engine but still we are  facing the FPM Runtime Exception as mentioned below, when the user clicks on the task/workitems in the UWL.
    Initially I followed the SAP Notes: 959462, 944221, 915399, 836174. But still we are unable to resolve the exception.
    Exception:
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario
    at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
    at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1948)
    at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1042)
    at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:459)
    at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:798)
    at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
    at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
    Please share your valuable ideas----your help would be highly appreciated.
    Regards
    Phani

    Log on to visual Admistrator.
    Click on Services->Security Provider->User Management.
    Hi Hauck,
    I already checked in the Tcode QISRSCENARIO, that the corresponding Form is attached to the scenario.
    Finally I resolved in the following way after all attemps
    In the Visual administartor>Security Provider>Usermanagement
    Search for ADsuser and click on it.
    Switch on to Edit mode for editing ADSUSer.
    Change its password to xxxxxxxx. then select (Check) No Password Change Required.
    Save it. Then again reach 'com.sap.tc.webdynpro.adsproxy.AdsProxy/ConfigPort_Document' and retype the new password.
    Now it is working fine.
    Cheers
    Phani

  • Regarding Adobe form for development but the ADS always has a problem

    Hi,
    Currently we are using Adobe form for development but the ADS always has a problem in EC6 as below.
    Test Program: Version Information (for Analysis Only)
    System Error
    ERROR CODE: 100.101
    ERROR MESSAGE: SOAP Runtime exception: CSoapExceptionTransport : HTTP receive failed with exception communication_failure
    SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport: HTTP receive failed with exception communication_failure(100.101).
    Would you pls help to figure it out?
    Thanks & Regards,
    Suneetha

    Hi,
    It seems that you ADS settings have not been maintained,
    check the note
    944221 Troubleshooting if problems occur in forms processing
    Hope this resloves your issue,if not revert back.
    Regards,
    Vamshi.

  • Adobe Form - Print page at the end for every record of a Z table with Text

    Hello friends, I am facing a challenging here and I need to develop the following below. Mind you, I don't have much exposure/experience with Adobe Forms
    Scenario: Standard REAL ESTATE Contract Form
    I have a Z table containing RENTAL OBJECTS, in my case 3 records and I want, at the end of the form print one page like below to each record that i have in my Z table.
    "Dear Z-field1 one, regarding your contract for Z-field2, Address Z-field3, blah blah blah"
    In essence, print a page for each one of them at the end, with the text above using the fields from the z table.
    I searched the forum and couldn't find any thing like it.
    If someone can help it would be much appreciated.
    Thanks, Marco

    Hi Marco,
    You must be having the ztable fields in the context or in the data heirarchy of the adobe form.
    Assume that your main form is on the page1.
    Create a table bound to ztable with 3 rows in it and make it invisible on the form.
    Below the form create 3 pages page2, page3 and page4.
    Create a ISR text display and on the initialise event write the code such as:
    this.rawValue = data.page1.Table2.Row1.Cell1.rawValue;
    Create as many ISR texts as you want and initialize it using the above method.
    Page1
    form
    Page2
    Row1 values
    Page3
    Row2 Values
    Page4
    Row3 Values
    Hope this helps.

  • Adobe Forms function module - downloading the xstring output in PDF file

    Hi Guys,
    I'm using Adobe forms and fetching its output in an XSTRING PDF format. How can I download this XSTRING output to a PDF file and store on the local file system?
    I'm using the following approach to getting a PDF output:
    ls_outputparams-getpdf = 'X'.
    CALL FUNCTION 'FP_JOB_OPEN'
      CHANGING
        ie_outputparams = ls_outputparams.
    * Get the name of the generated function module
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = 'ZADOBEFORM'
        IMPORTING
          e_funcname = lv_fmname.
      IF sy-subrc <> 0.
      ELSE.
    *   Call the Adobe Form function module
        CALL FUNCTION lv_fmname
          EXPORTING
            /1bcdwb/docparams  = ls_docparams
          IMPORTING
            /1bcdwb/formoutput = ls_form_output
          EXCEPTIONS
            usage_error        = 1
            system_error       = 2
            internal_error     = 3.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    * Close the spool job
    CALL FUNCTION 'FP_JOB_CLOSE'.
    Now, the variable LS_FORM_OUTPUT-PDF contains the PDF output in XSTRING. My question is how can I download this as a PDF file to my local machine.
    Kind Regards,
    Shailesh.

    hi guys,
    im using all FM to download my PDF adobe but in this part :
    ls_spfli-carrid = 'AA'.
    ls_spfli-connid = '0017'.
    APPEND ls_spfli TO it_spfli.
    flag                     = 'X'.
    is_address_type          = '1'.
    is_address_number        = '22515'.
    is_person_number         = '22517'.
    is_country               = 'IN'.
    *&--- Call the generated function module
    CALL FUNCTION '/1BCDWB/SM00000200'
       EXPORTING
    *   /1BCDWB/DOCPARAMS        =
         it_spfli                 = it_spfli
         flag                     = flag
         is_address_type          = is_address_type
         is_address_number        = is_address_number
         is_person_number         = is_person_number
         is_country               = is_country
      IMPORTING
        /1bcdwb/formoutput       = fp_formoutput
      EXCEPTIONS
        usage_error              = 1
        system_error             = 2
        internal_error           = 3
        OTHERS                   = 4
    I have usage_error knowing that the execution of the function module in SE37 pass successfuly and also the execution of the forms .
    in your opinion what can be the problem?
    Kind Regards,

  • Adobe forms: How to reduce the spacing dynamically between two variables

    Hi All,
    I have a requirement where at the header I am printing the address and below that other contact detials of vendor. I have used standard address element of adobe forms and printing it on the form using a variable.
    When my addres contains 3 lines only in that case other contact details which are below address varible should dynamically move up.
    BRADKEN RESOURCES P/L
    86 BYNG STREET
    ORANGE NSW 2800
    Tel 123456789
    How can reduce the above spacing bet two variable. Please help me in getting the solution for this issue.
    Many thanks in advance!
    Vikash

    Hi
    You can concatenate the 2 variable and display it on that field.
    data.Page1.<field>.rawValue = Concat(data.Page1.<field1>.rawValue , "\u000a" , data.Page1.<field2>.rawValue)
    Kind Regards
    Mukesh

  • ADOBE form - page reset for the second SO

    Hi all,
    Iam working on sales order form ( ADOBE Form). Nneed to display SO header and item details.But it is not for a single SO and it is for multiple SOs.First i need to display one sales order and its items after completing the all items of the first SO , the second SO details should come in the next page. This is fine, i have done this, but for the second SO the page numbers should start from 1. That means the page no has to be reset for each SO change.Suppose assume that, if the first SO is taking 2 pages for  printing item details and second SO is taking 3 pages for printing item details then the page nos should follows the below sequence:
    First SO :  1 of 2
                    2 of 2
    second SO : 1 of 3
                        2 of 3
                        3 of 3.
    but it is printing as 1 of 5, 2 of 5 ..... like this. Because we are using the system field for this.Can we reset the page numbers according to the condition?
    Regards ,
    Vineel.

    Hi,
    One addition to the previous answer. You need to set the Output device in the program itself and the nodialog field of the outputparams should be set to 'X'. For example you can go through the below code.
    DATA:
      w_formname TYPE fpname,
      w_function TYPE funcname.
    DATA : docparams TYPE sfpdocparams.
    DATA : formoutput TYPE fpformoutput.
    DATA : outputparams TYPE sfpoutputparams.
    DATA:
          BEGIN OF fs_orders,
            vbeln TYPE vbak-vbeln,
          END OF fs_orders,
          t_orders LIKE STANDARD TABLE OF fs_orders.
    SELECT vbeln
      FROM vbak
      INTO TABLE t_orders
        UP TO 5 ROWS.
    CHECK sy-subrc EQ 0.
    w_formname = 'YH297_FORM_SALESORDER'.
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
      EXPORTING
        i_name                     = w_formname
      IMPORTING
        e_funcname                 = w_function
      E_INTERFACE_TYPE           =
    outputparams-dest = 'PDF1'.
    outputparams-nodialog = 'X'.
    LOOP AT t_orders INTO fs_orders.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = outputparams
        EXCEPTIONS
          cancel          = 1
          usage_error     = 2
          system_error    = 3
          internal_error  = 4
          OTHERS          = 5.
      IF sy-subrc NE 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION w_function
        EXPORTING
        /1bcdwb/docparams        =
          document                 = fs_orders-vbeln
      IMPORTING
        /1BCDWB/FORMOUTPUT       =
        EXCEPTIONS
          usage_error              = 1
          system_error             = 2
          internal_error           = 3
      IF sy-subrc NE 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION 'FP_JOB_CLOSE'
    IMPORTING
       e_result       =
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          OTHERS         = 4.
      IF sy-subrc NE 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDLOOP.
    Regards,
    Ram

  • Bom item in adobe form will display inside the main item

    hi gurus,
    Currently i am displaying a print adobe form of order confirmation (va02) . but requirement is like i need to display Bills of Material item  bit inside the main item level . for ex : there are total 50 line items in a sales order and for item no 20 , 30 and 40 are the Bom item in that sales order only.now rather to print all the items in a same level i  need 30 and 40 will display bit inside in the form.....currently i am using table row in form......
    Edited by: Manoj Kumar on Jan 8, 2008 1:21 PM

    hi gurus,
    Currently i am displaying a print adobe form of order confirmation (va02) . but requirement is like i need to display Bills of Material item  bit inside the main item level . for ex : there are total 50 line items in a sales order and for item no 20 , 30 and 40 are the Bom item in that sales order only.now rather to print all the items in a same level i  need 30 and 40 will display bit inside in the form.....currently i am using table row in form......
    Edited by: Manoj Kumar on Jan 8, 2008 1:21 PM

  • ISR adobe form unable to display the drop down

    Hi,
    I need to create a F4 help for a field in adobe form created using ISR.
    I have used the ISR text edit - Value help , But when i run the adobe form using the SFP tcode the
    F4 help is not displayed.
    Please suggest the way to populate the the input field with the domain F4 value.
    What are the prerequiste to run a ISR ?
    Thanks,
    Deeplata

    Can i run the ISR form directly form SFP tcode?

  • Must ADOBE forms be stored on the server with ADS

    A few questions.
    Must ADOBE forms be stored locally on the server that is configured to run ADS?
    OR
    Can the forms the stored locally on other SAP systems and then you can connect to ADS to generate the actual output form?
    I would think it's the latter, if this is the case.
    Has anyone configured different SAP systems to utilize a single ADS server?
    Is this information included in the Configuration guide?
    Regards,
    Lavaughn

    You have not answered my question of whether or not our company has the option of storing the forms and compiling responses on our own server.  We're a very large company with a large IT department that manages all sensitive information for our company.  Therefore, your response to my question is greatly appreciated.
    Thank you

  • While transfering Adobe form to PS(Project system) getting Error.

    Hi Experts,
    I am getting error While transfering Adobe form to PS getting Error.
    The asdobe form we are using is DPR_STATUS_REPORT_AIF and enhancement implementation is DPR_STATUS_REPORT_AIF.
    I am getting the following error.
    Error occurred when generating the print preview (function module: /1BCDWB/SM00000006)
    ADS: com.adobe.ProcessingException: com.adobe.Processin(200101 )
    Please help me with this.
    Thanks in advance
    Subhaskar

    Hi Max,
    Yes its in Active. Even i can be able to see the print form in SFP transaction.
    But the problem is coming when we are transfering the adobe form to PS(Project System).
    Regards
    Subhaskar

  • When I open a book in Adobe Digital Editions, I get the following error: Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN:

    Hi, I bought an e-book in PDF format that uses Adobe DRM.  I've created an account on adobe.com and tried downloading the book in Adobe Digital Editions on the Mac (as well as the bookstore's e-reader--logged into my Adobe account--on an Android device). 
    It tries to download the book but get's the following error:
    Error getting License. License Server Communication Problem:
    E_ADEPT_DOCUMENT_TYPE_UNKNOWN:
    Has anyone come across this?  Any guidance would be most appreciated!
    Thanks!
    Tony

    Please refer to the KB article, Public Knowledge Base

Maybe you are looking for