No available events to handle onclick of a tab?

Maybe I'm missing something here, but we have implemented a tabstrip view with multiple tabs. But we can't seem to find an event that allows us to code some custom logic that is fired whenever a particular tab is clicked.
Right now, there is some code that is invoked in the custom controller whenever the entire tab strip view is displayed, but functionally, when a user clicks on a particular tab, I actually want some other logic to invoke to see if other tabs have got certain data. I cannot seem to find a place to put this code that executes when a particular tab is clicked.
Help!

Hi Yew
You can attach an action to the onSelect event in the TabStrip. On every selection of a tab this will be fired and in the modify view you can use the following code to find out which tab is selected
IWDTabStrip iwdTabStrip = (IWDTabStrip) view.getElement("<id of the TabStrip>");
String selectedTab = iwdTabStrip.getSelectedTab();
The string 'selectedTab' will be the id of the tab that you have selected.
Regards
Pran

Similar Messages

How to enable Sql Dependency OnDataChange event to handle multiple request at a time

when we work with sql dependency then we work with OnDataChange event and this event notify us regarding data change in table. suppose my application monitor a
test table by using sql dependency. suppose huge number of data is getting insert and updated in
test table very frequently. so i do not know how sql dependency
OnDataChange event can handle this situation because OnDataChange event will fire as many as time data will be change in db table.
here is my snip for onchange event
void OnDataChange(object sender, SqlNotificationEventArgs e)
((SqlDependency)sender).OnChange -= OnDataChange;
BBALogger.Write("PartIndexer Service RegisterNotification called end", BBALogger.MsgType.Info);
if (e.Source == SqlNotificationSource.Timeout)
MailSend(); // notification mail send
BBALogger.Write("PartIndexer Service SqlNotificationSource.Timeout error", BBALogger.MsgType.Error);
Environment.Exit(1);
else if (e.Source != SqlNotificationSource.Data)
MailSend(); // notification mail send
BBALogger.Write("PartIndexer Service SqlNotificationSource.Data", BBALogger.MsgType.Error);
Environment.Exit(1);
else if (e.Type == SqlNotificationType.Change)
StartIndex();
BBALogger.Write("PartIndexer Service Data changed", BBALogger.MsgType.Info);
else
BBALogger.Write(string.Format("Ignored change notification {0}/{1} ({2})", e.Type, e.Info, e.Source), BBALogger.MsgType.Warnings);
RegisterNotification();
please help me to design my OnDataChange event such was if data is changed very frequently in test table then
OnDataChange can handle the situation. OnDataChange event should not be freeze and can log each data change in xml file.
i am just looking for guidance like how to design OnDataChange as a result it could handle and log data when huge number of user will change data in test table frequently. thanks

Hi,
You should be able to delete all nodes selected by an XPath expression... Have a look at this...
http://docs.oracle.com/cd/E28280_01/dev.1111/e15866/ui_ref.htm#i1290003
Cheers,
Vlad

(com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.

Hello,
I am fairly new at Xserve administration, but I got thrown in the fire and i need your help.
My system.log is being hammered with this error:
(com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.
I did my research and it seems to be related to Wiki, but I disabled wiki and restarted and it is still coming up. Any advice would really help
System Version: OS X 10.10.1 (build 14B25)
Server Version: Server 4.0.3 (Build 14S350)

Try deleting the preferences file

What is the event to handle before leaving the page?

Hello All,
I am using splitApp. I have a scenario where user can edit few fields in one of the "Detail" page. When user clicks some item in master page, before changing the detail page I want to show a popup to user if changes should be saved.
Is there an event where I get to know any detail page navigation? or some event to handle before leaving the page.
Thanks,
Rashmi

Hi Rashmi,
It depends on which element you are using.
Suppose you are using sap.ui.commons.TextField where you are editing your data(In Detail View) then change event is triggered whenever the text in the field has changed AND the focus leaves the TextField or the Enter key is pressed and you can use this event in your code according to your need.
Here you may set some global variable and check that value if it is set or not.
Best Regards
Dhananjay

Raise event inside handler of another event

Hello,
Is there any way of triggering an event from handler of another event? Its like: Trigerring even 'expand_empty_node' inside handler of event 'checkbox_change'. I am using slav tree.
Regards
Puru

Hi,
Please declare the event in componentcontroller and use code wizard to raise that event.
Depending upon your functionality, write in the event handler in a view (used or consumer component). If you want to use the event across components then please mark that event as interface event by checking the interface column.
thanks,
Rahul

How Keyboard & Mouse Events are handled in java?

Hi
How Keyboard & Mouse Events are handled in java?
Kindly brief, how a key typed in the keyboard is sensed and it is entered in JTextField?
or
Pls. give me some links.
Am going to send the events from external device (like keyboard) to OS and from that I need to capture that event in Java Swing?
Pls. drop in a bit. So that it will be helpfull to me.
Thanks in advance,
bee

Actualy am very much aware of using KeyListener and MouseListener. I am in need of internal details,
how typing a key in keyboard is captured by KeyListener? How the event is passed to java swing and and it is fired to keylistener.
Pls. help me.
Thanks
bee

Property Inspector doesn't list all available events

I've noticed that JDev doesn't list all of the available events for a given swing component. For example, I created a JFrame, and added a JButton and a JTextField to it. As I'm looking at the property inspector for the JTextField, it shows me only the following events:
componentAdded
componentHidden
componentMoved
componentResized
componentShown
mouseClicked
mouseDragged
mouseEntered
mouseExited
mouseMoved
mousePressed
mouseReleased
propertyChange
There should be a lot more, such as keyPressed, keyTyped, etc. What's up with this?
Thank you,
Brian D. Brown

The behaviour described does not appear in our most recent builds, so you can expect it to function properly in the
next available release. Until then, your work around should alleviate the issue. Thanks for pointing out the problem.

Possible bug - Missing click event when handling change event

Using Flex 4.5 SDK, I have a spark ComboBox and a Button next to it for applying a filter according to ComboBox selection.
I listen to both the ComboBox's change event & the Button's click event (for different functions).
When I manually delete the ComboBox text value from its TextInput (i.e. changing selected index to -1) and immediately click on the Button,
the click event-handler function is not being called and only the ComboBox's change event-handler function is executed.
(Selecting a value from the ComboBox's list and clicking on the button triggers both methods on the right order.)
There's also a state definition for the module, but it isn't being changed during these operations...
Is this a bug or a correct behavior? Am I missing something here?
Any workaround suggestions?
(I thought of listening also to mouse-down or mouse-up on the button instead, but haven't tried it yet...)
*** UPDATE ***
When using the Button's mouseDown event the behavior is as expected, so there's a simple workaround.
However, it seems to me like there's a bug with the Button's click event listener or something...
*** UPDATE #2 ***
I created a test application for that and couldn't reproduce the problem.
Then I figured out the problem and solved it.
It's a bit emmbarrasing, but I actually disabled the button (enabled=false) as in a child method of the change handling code...
(If there is no value, don't allow applying the filter - It makes sense! )
Anyway... No issue after all.
However, I choose to leave this post (and not delete it) as an example of identifying and resolving a strange behavior in a complex application.

There's no need.
Please read the section UPDATE #2.

Parallel event handlers disabling events while handling

Hi, I have an application where there are multiple event handlers in multiple while loops that are driven from the same front panel. The front panel controls are designed to provide diferent motion control moves for different axes under control. All events that trigger these moves are fired by the same event handler for the same axes of motion. Hence, for safety reasons, I do not want some of these controls to be executable while certain other move profiles are executing. Sounds simple to implement right?
When I use traditional prop nodes like disable to disable the front panel controls, the event queue still acquires the event and then subsequently executes it. I want to be able to clear this event queue so that no other events from a certain group of my front panel controls can be executed simultaneousy. However, I do not want to disable all front panel controls since I have other buttons that are capable of controlling other indepenedent things and safety functions like stopping.
It is like I need a disable events property or soemthing that can be done programmatically. Can someone please advise me on what makes sense to do here?
Attachments:
evntdisable.vi ‏119 KB

There is no way to interact directly with the event queue that LV maintains. If you need to do that you need to utilize the queue functions that LV provides and create your own event queue. However, if all you need is prevent interactions while an event in being processed, value change events have a setting that is (set by default) called: Lock Panel Until Handler Completes. And for other kinds of events, there's an option in the event structure's event-definition dialog box that perhorms the same action.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Generalised Event Exception Handler

Hi all experts,
Can anybody plz tell how to create a generalised Exception Handler , so that wenever a exception is generated in the main method the Exception Event Handler shud be initialised to catch the exception for all the exceptions generated at runtime.
I want the Exception Event Handler to catch the exceptions for RFC BAPI,EJB Webservice,etc..as i am using this in my application to give general message at runtime if any exceptions is generated from the try-catch block.
Waiting for the reply.
Regards:
SK

Hi SK,
There is a general Exception that you can use for all exceptions thrown.
just add this code for any exception you want to catch.
try
// try anything
catch(Exception e)
// catch any exception
Regards,
Marshall.

Dynamic Event to handle 12x12 Array or Cluster UI

I'm looking to handle up to a 12x12 array/cluster to enable different LEDs. The enable method will be two numeric controls, MxN, which will light LEDs in a specific order based on the MxN control data entered. The specific order is right to left, bottom to top. Right now, I have only a few states functional, but I have to account for every state as shown in my block diagram. I'm looking for some feedback on how to handle this dynamically. I am aware of the Register For Events, but lack the experience to understand if this is the route I should take. Thanks in advance to all who respond!
Examples
2x2         3x3
4|3          9|8|7
2|1          6|5|4
               3|2|1
Solved!
Go to Solution.

Why are you making the array a control? Why not just make it an indicator so you don't have to use the local variable?
Also, make sure your stop button is actually in a Stop Button:Value Change event case. You will not be able to stop your VI as is written.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
2DArrayTest_MOD.zip ‏6 KB

Event to handle DocNo. automatic population after document was added

Hi,
I have created a UDF using SAP B1 Studio with visual studio 2010.Values can enter in form and it is successfully added to table. I am trying to show the DocumentNo. automatically once document got added to the table.
i.e., DocNo. textbox in form is empty once document got added.I have tried in Buttonclick after,Data Add after...Its not working.
In which event can we handle this?
Thanks in Advance,
Parvatha Solai.N

Hi Parvatha,
The DocNumber is finalised by SAP when you save the document.
Hence, you cannot save this number into your UDF at the same time.
This has to be a two step process.
On After Data Add event,
    1 get the DocEntry from the pVal.ObjectKey
    2 Call up the Doc using this object key and update your UDF
          Dim oDoc As SAPBobsCOM.Documents = oCompany.GetBusinessObject(yourDocObjType)
          oDoc.GetByKey(DocEntry)
          oDoc.UserFields.Fields.Item("UDF").Value = oDoc.DocNum
          oDoc.Update
On the other hand, why would you want to save the docnum in the user field ?
Regards
Edy

How events are handled in mac os x

Hi I am trying to write an application to handle driver asynchronous event.. it should be similar to iwevent in our linux.. can anybody give me an idea as how to start with it.. and what are all the API's used for the same..
Thanks in advance

I suggest you do a google search for "events" on developer.apple.com (use this link) and you should find everything you are looking for on the subject or pointers to it. Berkeley Unix and the Mach kernel are the underlying architectures for OSX and you cannot count on extrapolating linux to OSX.

Exception event subprocess handling

We have a question around an exception event subprocess. In reading Oracle Fusion Middleware Modeling and Implementation Guide for Oracle Business Process Management 11g Release 1 (11.1.1.5.0) it indicates in section 19.5.6 that we can catch all system exceptions. Earlier in that section 19.4.1 point 4, second bullet point, it states “(w)hen the instance completes the exception handling flow, the process ends.” Our question is does the instance just end in the exception subprocess or does it route back to the task that threw the exception?
We would like to have events throw an exception into the exception subprocess and after the subprocess ends route back to the task that threw the exception. In 10g this was the case and we are checking to see if that is true in 11g or how we need to handle this scenario.

I do not understand your response. I have an event subprocess that catches all system and business errors. Then in that process I have a (Start Catch Error)->(user activity) ->??? What do I put as my end event? If I put a message end it is asking for the start message, which I don't have. What I want is when the admin had fixed the error, and they click accept/ok and submit, I want the instance to go back to where the error happened. For example, I have a sales quote process like this: (start)->(user activity)->(service activity)->(user activity)->(end). And for sake of this example my service activity does a database lookup, but the database is down so a system error is generated. So in this case my event subprocess catches the error and the admin fixes the error and submits. How do I get the instance to go back to my service activity. And yes in this simple case a i would have used a boundary event but for the sake of this example assume I have say 50 service activities and I don't want to put a boundary even on each one.
Thoughts/suggestions?

Is there a way to add an event to the event queue handled by the event structure?

I am using an event structure to control the flow of a program. In one case I want to change the state of a switch and then have the event structure catch this exception and handle it. It works if the user toggles the switch, but doesn't seem to when it is done programmatically. Any suggestions.

Hello,
LabView User's manual says:
"Use Events for Direct User Interaction Only
Events wait only for direct user interaction on the front panel. Events do not work if you use VI Server, global variables, local variables, and so on to change VI or front panel objects programmatically."
However, you can have a look in Example Code, there's some applications generating events programmatically, maybe that helps you. (Search for event structure in support).
Hope that helps,
SBC

No available events to handle onclick of a tab?

Similar Messages

Maybe you are looking for