No data in trace file view panels

Hello,
I was not aware of the open -> .trc file feature until I saw it posted earlier in this forum.
Do you know if the issue is being investigated?
The running dialog appears for a few minutes with lots of cpu activity and then ... nothing.
I am using Version 2.1.0.63 , Build MAIN-63.73 . (Windows XP, service pack 2)
regards,
Ken

I got this yesterday. The situation was I was tracing an APEX application by using
dbms_monitor.serv_mod_act_trace_enable (service_name=>'***',module_name=>'APEX:APPLICATION 301',binds=>TRUE);
The resulting .trc file couldn't be 'visualized' in SQL Developer.
I also tried a "TKPROF record=file" which came up empty.
Investigating the latter, I found all the statements/cursors in the file had a "dep=1" or higher. That is, they were all 'recursive' and the top level statement hadn't been captured (presumably because it was executed prior to the module name being set). The "record" option ignores recursive statements.
Anyway, I edited the file and replacing all the "dep=1" with "dep=0" (and "dep=2" with "dep=1"). I retried that file in SQL Developer and then I got some output in the window.
This was using SQL Developer 3.1 EA1, but I'd guess it applies to earlier versions too.

Similar Messages

How to make my old file info panel from photoshop work in xmp

Help. Not a photoshop guy but rather a genealogist. Many years ago downloaded a custom file info panel for photoshop which I used to enter meta text about the family photos I scanned. Currently using adobe creative cloud but cant figure out how to use panel or see most of my metatext last few version. Below is information about the panel. All I really want to do is install my panel and get back to genealogy. I apologize but not sure I need to understand the basics of photoshop..
john weis
[email protected]
This is the authors description of the panel:
Genealogy Photo (Private Collection) Custom File Info Panel 1.0 for Photoshop. 11 FEB 2007
Developed by Ron Reiger [email protected]
Please contact me to suggest improvements.
1. BASIS FOR THIS CUSTOM FILE INFO PANEL
2. DESCRIPTION OF EACH PROPERTY NAME
3. WHERE EACH PROPERTY NAME MAPS & OTHER NOTES
4. WHERE TO INSTALL THE CUSTOM FILE INFO PANEL
1. BASIS FOR THIS CUSTOM FILE INFO PANEL
The Custom File Info Panel is used to capture metadata about a genealogy/family history photo that is privately held (that is, the photo is not in the possession of a library). The metadata property names on the File Info Panel are based on my interpretation of the recommended primary citation for a photograph (private possession) (annotated, with provenance) as described on page 95 of Elizabeth Shown Mill's "Evidence! Citation & Analysis for the Family Historian" and on my interpretation of recommended primary citation for an Electronic File (Image from Private Files - Annotated), Mills, "Citation!", page 81. I added a few more property names for location and date the photo was taken and keywords (to ID people by number rather than by name), the name of the person who provided the description, a surety for their description, and an informal description. Each field is discussed below.
2. DESCRIPTION OF EACH PROPERTY NAME
Date Scanned: This is the date the photo was scanned. Date is populated by Photoshop and is not editable.
Provider: The owner of the photo as of the date it was scanned. A researcher in a future generations will know who had the photo at a particular point in time.
Provenance: Describe as best you can how the photo got from the person in the photo to the Provider.
Description Provided By: List the person who identified the people and location in the image.
Description Surety: (This is an open text field. You can use any surety rating system you want.) Describe or rate the quality of the Description of the image's people and location. Note any uncertainties regarding any particular people in the photo.
Complete Subject Description: List the full name of each individual in the image, in order. You may want to list the location and date of the image even though there are separate property names for that data.
Informal Subject Description: An optional non-genealogical description of the image, perhaps for using the photo outside of genealogy. Example Informal Subject Description: "Grandpa as a young man."
Media Description: Describe the paper photo you scanned. Dimensions, border, frame, damage, etc. Your ancestors will have an easier time finding the paper photo later if you describe it well!
Annotations: Copy any annotations on the front or back of the photo and frame. Transcribe any photographer embossing/imprint; this is a clue for dating/locating photos.
Special Editing/Alterations: Describe any restoration you performed on the digital image. Did you correct for the lateral reverse of a tintype or daguerreotype?
City/County: List the City/County where the image was taken.
State: List the State where the image was taken.
Country: List the County where the image was taken.
Photo Date: List the date the image was taken.
Keywords: This is the standard keyword entry. Commas or semicolons can be used to separate keywords. I type the TMG ID number of each person in the photo here so I can search for all photos of the person without typing their name.
3. WHERE EACH PROPERTY NAME MAPS & OTHER NOTES
I have not created a working namespace URI or rdf ala http://purl.org/dc/elements/1.1/ for this panel. I have not created localization dictionary files for this panel. Data entered into the panel will appear in Adobe Bridge. As you can see below I re-used lots of pre-existing property names and dumped all my new property names into the photoshop namespace. I don't know if this approach has drawbacks.
Date Scanned:                xmp_path: 'CreateDate'   Pre-existing property name
Provider:    xmp_namespace: photoshop, xmp_path: 'Credit'    Pre-existing property name
Provenance:    xmp_namespace: photoshop, xmp_path: 'Provenance'
Description Provided By: xmp_namespace: photoshop, xmp_path: 'DescriptionProvidedBy' Pre-existing property name
Description Surety:   xmp_namespace: photoshop, xmp_path: 'DescriptionSurety'
Complete Subject Description:   xmp_namespace: photoshop, xmp_path: 'Description'   Pre-existing property name
Informal Subject Description: xmp_namespace: photoshop, xmp_path: 'Caption'   Pre-existing property name
Media Description:   xmp_namespace: photoshop, xmp_path: 'MediaDescription'
Annotations:     xmp_namespace: photoshop, xmp_path: 'Annotations'
Special Editing/Alterations: xmp_namespace: photoshop, xmp_path: 'SpecialEditing'
City/County:    xmp_namespace: photoshop, xmp_path: 'City'    Pre-existing property name
State:     xmp_namespace: photoshop, xmp_path: 'State'    Pre-existing property name
Country:     xmp_namespace: photoshop, xmp_path: 'Country'   Pre-existing property name
Photo Date:    xmp_namespace: photoshop, xmp_path: 'DateCreated'   Pre-existing property name
Keywords:               xmp_path: 'Keywords'   Pre-existing property name
4. WHERE TO INSTALL THE CUSTOM FILE INFO PANEL
I have tested this panel with Photoshop CS2 and Adobe Bridge CS2 only. It may not work on earlier versions. FWIW a malformed Custom File Info Panel will fail to load in File Info; it won't crash Photoshop.
The following was taken from "XMP Custom Panels," Adobe, Oct 2003.
Each time an Adobe application opens the File Info dialog, it scans all the files in these directories and appends them to the file list. If more than one of the description files has
the same panel name, the one found in the last file to be loaded is added, and others are ignored.
Changes to the contents of the directories do not require you to reload an application; changes are automatically reflected in the dialog the next time it is opened.
The panel description and localization dictionary files must reside in the following locations for use with Adobe Creative Suite applications:
Mac OS X
{Root Volume}/Library/Application Support/Adobe/XMP/Custom File Info Panels
{Home Directory}/Library/Application/Adobe/XMP/Custom File Info Panels
Windows
\Program Files\Common Files\Adobe\XMP\Custom File Info Panels
\Documents and Settings\<user>\Application Data\Adobe\XMP\Custom File Info Panels
The panel description and localization dictionary files must reside in the following locations for use with Adobe Acrobat 7.0 or 6.0:
Mac OS X
{Root Volume}/Library/Application Support/Adobe/Custom File Info Panels
{Home Directory}/Library/Preferences/Adobe/Custom File Info Panels
Windows
\Program Files\Common Files\Adobe\\Custom File Info Panels
\Documents and Settings\<user>\Application Data\Adobe\Custom File Info Panels
I actually do not understand how to write a panel but here is the actual panel:
<?xml version="1.0">
<!DOCTYPE panel SYSTEM "http://ns.adobe.com/custompanels/1.0">
<panel title="$$$/CustomPanels/Acro/PanelName=Gen Photo (Private Collection)" version="1" type="custom_panel">
group(placement: place_column, spacing: gLargeSpace, horizontal: align_fill, vertical: align_top)
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text(name: '$$$/AWS/FileInfoLib/Panels/Description/DateCreated=Date Scanned:', font: font_small_bold_right, vertical: align_top);
date_static_text(fbname: '$$$/AWS/FileInfoLib/Panels/Description/DateCreated=Date Scanned', name: '$$$/AWS/FileInfoLib/Panels/DateCreated=Created', xmp_path: 'CreateDate', horizontal: align_fill, vertical: align_top, truncate: true, locked: true);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text(name: '$$$/CustomPanels/Genealogy/Provider=Provider:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/Provider=Provider', horizontal: align_fill, font: font_small, xmp_namespace: photoshop, xmp_path: 'Credit', vertical: align_top);
mru_popup(xmp_namespace: photoshop, xmp_path: 'Credit', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text(name: '$$$/CustomPanels/Genealogy/Provenance=Provenance:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/Provenance=Provenance', horizontal: align_fill, height: gTextViewHeight, xmp_namespace: photoshop, xmp_path: 'Provenance', container_type: alt_struct, v_scroller: true);
mru_popup(xmp_namespace: photoshop, xmp_path: 'Provenance', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/DescriptionProvidedBy=Description Provided By:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/DescriptionProvidedBy=Description Provided By', horizontal: align_fill, font: font_small, xmp_namespace: photoshop, xmp_path: 'DescriptionProvidedBy', vertical: align_top);
mru_popup(xmp_namespace: photoshop, xmp_path: 'DescriptionProvidedBy', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/DescriptionSurety=Description Surety:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/DescriptionSurety=Description Surety', horizontal: align_fill, height: gTextViewHeight, xmp_namespace: photoshop, xmp_path: 'DescriptionSurety', v_scroller: true);
mru_popup(xmp_namespace: photoshop, xmp_path: 'DescriptionSurety', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text(name: '$$$/CustomPanels/Genealogy/Description=Complete Subject Description:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/Description=Complete Subject Description', horizontal: align_fill, height: gTextViewHeight, xmp_namespace: photoshop, xmp_path: 'Description', container_type: alt_struct, v_scroller: true);
mru_popup(xmp_namespace: photoshop, xmp_path: 'Description', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/Caption=Informal Subject Description:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/Caption=Informal Subject Description', horizontal: align_fill, height: gTextViewHeight, xmp_namespace: photoshop, xmp_path: 'Caption', v_scroller: true);
mru_popup(xmp_namespace: photoshop, xmp_path: 'Caption', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/MediaDescription=Media Description:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/MediaDescription=Media Description', horizontal: align_fill, height: gTextViewHeight, xmp_namespace: photoshop, xmp_path: 'MediaDescription', v_scroller: true);
mru_popup(xmp_namespace: photoshop, xmp_path: 'MediaDescription', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/Annotations=Annotations:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/Annotations=Annotations', horizontal: align_fill, height: gTextViewHeight, xmp_namespace: photoshop, xmp_path: 'Annotations', v_scroller: true);
mru_popup(xmp_namespace: photoshop, xmp_path: 'Annotations', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/SpecialEditing=Special Editing/Alterations:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/SpecialEditing=Special Editing/Alterations', horizontal: align_fill, height: gTextViewHeight, xmp_namespace: photoshop, xmp_path: 'SpecialEditing', v_scroller: true);
mru_popup(xmp_namespace: photoshop, xmp_path: 'SpecialEditing', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/City=City/County:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/City=City/County', horizontal: align_fill, font: font_small, xmp_namespace: photoshop, xmp_path: 'City', vertical: align_top);
mru_popup(xmp_namespace: photoshop, xmp_path: 'City', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/State=State:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/State=State', horizontal: align_fill, font: font_small, xmp_namespace: photoshop, xmp_path: 'State', vertical: align_top);
mru_popup(xmp_namespace: photoshop, xmp_path: 'State', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/Country=Country:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/Country=Country', horizontal: align_fill, font: font_small, xmp_namespace: photoshop, xmp_path: 'Country', vertical: align_top);
mru_popup(xmp_namespace: photoshop, xmp_path: 'Country', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/CustomPanels/Genealogy/PhotoDate=Photo Date:', font: font_small_bold_right, vertical: align_top);
edit_text(fbname: '$$$/CustomPanels/Genealogy/PhotoDate=Photo Date', horizontal: align_fill, font: font_small, xmp_namespace: photoshop, xmp_path: 'DateCreated', vertical: align_top);
mru_popup(xmp_namespace: photoshop, xmp_path: 'DateCreated', container_type: alt_struct, no_check: true, vertical: align_top);
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text( name: '$$$/AWS/FileInfoLib/Panels/Description/Keywords=Keywords:',font: font_small_bold_right, vertical: align_top);
cat_container_edit_text(fbname: '$$$/AWS/FileInfoLib/Panels/Description/Keywords=Keywords',horizontal: align_fill, height: gTextViewHeight, xmp_path: 'Keywords', container_type: bag_struct, v_scroller: true);
mru_popup(xmp_path: 'Keywords', container_type: alt_struct, no_check: true, vertical: align_top);
</panel>

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

Different Deadlock trace files

Hello,
In our application we use to have deadlock issues and i need to analyze that
trace file.Some time i use to have trace files which is having current session and
waiting session information and with modules and queries they are executing in top section
of trace file only , no need to read below data in trace file . But some times the
trace files are different..all update or select for update queries are spread
across the file and very difficult to understand which was locking what. Is that in rac or 11g environment
deadlock trace file is having different structure,?
One more question regarding deadlock ...many time we found that the current
query is updating on table A and waiting query updating on table B .. Is it possible
to have deadlock scenario when queries are working on different tables ? or
many be it is happening only if tables are in relation like parent and child ?

hi,
Are you referring to .trm extention trace files which youare unable to read?
Here is good explanation of reading deadlock trace files
ORA-00060 Deadlock trace files.. how to read?
Thanks,
Ajay More
http://www.moreajays.com

Trace file handling

SQLDeveloper 1.5 gives us sophisticated trace file handling.
However, this trace file handling appears to be designed for viewing files containing sql traces
(alter session set sql_trace=true).
While it's certainly true that the majority of trace files viewed in SQLDeveloper will contain
SQL traces, there are cases when I have to view other content in trace files. (anything
from error reports to the output of tracing events).
The current interface only allows me to view the raw file contents in the history tab of the trace
file's window, and I'm not convinced that this is the best way to view the raw contents of
a trace file.
I know that I could alway open the trace file with the editor of my choice to view the raw
contents, still would like to be able to do that from within SQLDeveloper.
I'd love to see a tab to just view the raw contents of the file. Do other feel the need for such
a tab too? Do you feel that this idea has enough merit to be posted as an enhancement request?
All the best
Michael

SQLDeveloper 1.5 gives us sophisticated trace file handling.
However, this trace file handling appears to be designed for viewing files containing sql traces
(alter session set sql_trace=true).
While it's certainly true that the majority of trace files viewed in SQLDeveloper will contain
SQL traces, there are cases when I have to view other content in trace files. (anything
from error reports to the output of tracing events).
The current interface only allows me to view the raw file contents in the history tab of the trace
file's window, and I'm not convinced that this is the best way to view the raw contents of
a trace file.
I know that I could alway open the trace file with the editor of my choice to view the raw
contents, still would like to be able to do that from within SQLDeveloper.
I'd love to see a tab to just view the raw contents of the file. Do other feel the need for such
a tab too? Do you feel that this idea has enough merit to be posted as an enhancement request?
All the best
Michael

How do I select more then one channel to view in tdms file viewer graph panel

I have a TDMS file that I can view with the labview 2013 TDMS file viewer and I can select one signal out of 15 signals to view on the graph panel. however I would like be able to look at 2 or 3 signals
on the same graph but can't seem to be able to select more then one signal at a time. Is there a way to select more then one to view?

I've modified the TDMS viewer in the past to allow selecting multple channels. It's a little bit of a pain because the tree control in the viewer only allows you to select one item. You have to edit the tree to allow multiple items. Now your selection is an array instead of a scalar. This means the rest of the code has to be updated, and the references to the tree in subVIs need to be updated. Not impossible but it takes some time. Alternativly open it in Excel with the free add-in then you can select the two columns you want and insert a graph. Not as simple for the user but using Excel, which users should be familiar with might mean users need less training on data files.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Is there a date entry widget for XMP custom file info panels?

Looking through the Custom File Info Panels documentation, the samples, and the default info panels presented in Photoshop, I can't find any reference to a date entry widget - the closest I've seen is the date_static_text widget.
Is there any way to present an editable, validating date entry field to our end-users through the File Info panel?
(the info we're wanting to store is a release date so it's user-specified, and not derivable from the file in any way)

Mark,
The PDF/A extension schema provides a big step to the self-sufficient functionality that you are asking about. It permits the XMP schema description information of custom XMP schemas to be embedded into the XMP as payload so that the file can be opened in years to come and the target metadata acurately interperted. Currently, PDF tools are active candidate to make use of this facility. However, there is nothing preventing future use with other file formats, and other tools (via plug-ins?).
It does not include vocabulary, static text, and panel presentation layout information.
http://www.pdfa.org/doku.php
It defines a "known" subset of standard XMP properties from the 2001 XMP Spec. Everything else is "custom".
You could craft a custom File Info "template" with the PDF/A extension for your custom XMP fields. Then import the template into each file.
The PDF/A extension schema itself is implemented with multi-dimensional XMP arrays. MetaGrove Plug-in dialog screen shots can be viewed on http://www.poundhillsoftware.net/Acrobat.htm
Regards,
Carl Rambert

Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.

I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support

When I sort by date added in Column View in Finder, how can I make the most recent files appear at the top of the list?(Mavericks)

In 10.8, when I sorted Finder by date added or date created in column view, the most recent files would appear at the top of the list. Currently, this happens as it should in every single view mode EXCEPT column view (which is pretty much the only view I ever use). Currently, I have a folder with over 2000 files in it that date back to 2011, so now I have to scroll for like ten minutes just te get to files that were most recently added. Who in their right mind would want to sort by last modified with the oldest result listed FIRST? Ridiculous. I can't figure this out. Any help?

Thanks for the reply leroydouglas! Unfurtunately this doesn't cause the column to be ordered correctly either. After selecting this option, the files seem to be ordered by label, and the most recently added file is somewhere in the middle of the list. I'd like it to be at the top, and have other files/folders descend in retrochronological order by their add date.
Any other input from the community would be greatly appreciated, even if it's just confirming that this is/is not expected behavior. I'd be super bummed to find out that this IS expected behavior, as it's really counterintuitive and extremely inconvenient.
Thanks again!

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

Multiple trace files whenever export of data takes place in Oracle 10.1.0

I have imported data from Oracle 7.3 into Oracle 10g Rel. 10.1.0. Now whenever i take normal Export, it creates multiple trace files. It gives error in following format
DBMS_DM_MODEL_EXP:schema_info_exp:DM models not found in schema <schema name>
Kindly help
Thanx.

check "dmsys" user account if is lock and unlock. account
sql>alter user dmsys account unlock;
thanx

File Info Panel to hit web service to fill out XMP data

Hi there,
Is there any way to use the File Info panel inside Indesign (for example) to hit a web service based info entered in a few fields which will return data to fill out the rest of the xmp data?
Or would you have to write some sort of plugin to do this?
I know Metagrove already does this, but it's a standalone plugin. We were wondering if anything can integrate directly into the File Info panel.
Thanks,
mark

Do you have a proxy defined in your jdev? This might prevent reading from the address you specified.
If you can access the url in a browser, you can store the WSDL on your local pc and use the local file to create the webServiceDataControl.
Timo

ORA-01157: cannot identify/lock data file 13 - see DBWR trace file

Hi all,
I've a Oracle Database 11g Release 11.1.0.6.0 - 64bit Production With the Real Application Clusters option.
I'm using ASM.
Yesterday I added new disks and then I changed the +/etc/udev/rules.d/98-oracle.rules+ file.
Now it looks like this (the bolded are the new ones):
# Oracle Configuration Registry
KERNEL=="emcpowerd1", OWNER="root", GROUP="oinstall", MODE="640", NAME="ocr"
# Voting Disks
KERNEL=="emcpowerr1", OWNER="oracle", GROUP="oinstall", MODE="640", NAME="voting"
# Spfile ASM+
KERNEL=="emcpowers1", OWNER="oracle", GROUP="dba", MODE="660", NAME="spfileASM"
# ASM Devices
KERNEL=="emcpowerj1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm0" #onlineredo asm disk
KERNEL=="emcpowern1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm1" #data asm disk
KERNEL=="emcpowerh1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm2" #data asm disk
KERNEL=="emcpowerq1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm3" #data asm disk
KERNEL=="emcpowere1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm4" #data asm disk
KERNEL=="emcpowerg1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm5" #data asm disk
KERNEL=="emcpowerl1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm6" #data asm disk
KERNEL=="emcpowero1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm7" #data asm disk
KERNEL=="emcpowerf1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm8" #data asm disk
KERNEL=="emcpowerm1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm9" #data asm disk
KERNEL=="emcpoweri1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm10" #data asm disk
KERNEL=="emcpowerp1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm11" #data asm disk
KERNEL=="emcpowerk1", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm12" #data asm disk
KERNEL=="emcpowert", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm210" #data asm disk SATA
KERNEL=="emcpowerc", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm211" #data asm disk SATA
KERNEL=="emcpowerb", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm212" #data asm disk SATA
KERNEL=="emcpowera", OWNER="oracle", GROUP="dba", MODE="660", NAME="asm213" #data asm disk SATA
It's the same on both RAC nodes.
The operating system, a RedHat 5.4, see the new devices (both nodes):
ls -ltr /dev/asm*
brw-rw---- 1 oracle dba 120, 16 May 18 10:03 /dev/asm212
brw-rw---- 1 oracle dba 120, 304 May 18 10:03 /dev/asm210
brw-rw---- 1 oracle dba 120, 32 May 18 10:03 /dev/asm211
brw-rw---- 1 oracle dba 120, 0 May 18 10:03 /dev/asm213
brw-rw---- 1 oracle dba 120, 209 May 18 10:05 /dev/asm1
brw-rw---- 1 oracle dba 120, 81 May 18 13:40 /dev/asm8
brw-rw---- 1 oracle dba 120, 97 May 18 13:40 /dev/asm5
brw-rw---- 1 oracle dba 120, 193 May 18 13:40 /dev/asm9
brw-rw---- 1 oracle dba 120, 161 May 18 13:40 /dev/asm12
brw-rw---- 1 oracle dba 120, 241 May 18 13:40 /dev/asm11
brw-rw---- 1 oracle dba 120, 177 May 18 13:40 /dev/asm6
brw-rw---- 1 oracle dba 120, 225 May 18 13:40 /dev/asm7
brw-rw---- 1 oracle dba 120, 65 May 18 13:40 /dev/asm4
brw-rw---- 1 oracle dba 120, 129 May 18 13:40 /dev/asm10
brw-rw---- 1 oracle dba 120, 257 May 18 13:40 /dev/asm3
brw-rw---- 1 oracle dba 120, 113 May 18 13:40 /dev/asm2
brw-rw---- 1 oracle dba 120, 145 May 18 13:40 /dev/asm0
Both ASM instance see new devices:
From ASM1
SQL*Plus: Release 11.1.0.6.0 - Production on Tue May 18 13:43:10 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
With the Real Application Clusters option
SQL> select instance_name from v$instance;
INSTANCE_NAME
+ASM1
SQL> select path from v$asm_disk;
PATH
/dev/asm212
/dev/asm211
/dev/asm213
/dev/asm210
/dev/asm1
/dev/asm4
/dev/asm5
/dev/asm0
/dev/asm12
/dev/asm9
/dev/asm2
/dev/asm10
/dev/asm7
/dev/asm11
/dev/asm3
/dev/asm8
/dev/asm6
17 rows selected.
SQL>
From ASM2
SQL*Plus: Release 11.1.0.6.0 - Production on Tue May 18 13:42:39 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
With the Real Application Clusters option
SQL> select instance_name from v$instance;
INSTANCE_NAME
+ASM2
SQL> select path from v$asm_disk;
PATH
/dev/asm213
/dev/asm211
/dev/asm210
/dev/asm212
/dev/asm8
/dev/asm7
/dev/asm6
/dev/asm11
/dev/asm4
/dev/asm12
/dev/asm5
/dev/asm9
/dev/asm1
/dev/asm3
/dev/asm10
/dev/asm2
/dev/asm0
17 rows selected.
SQL>
Then I created a disk group:
CREATE DISKGROUP STORE EXTERNAL REDUNDANCY DISK '/dev/asm210';
Then I created a new tablespace:
CREATE TABLESPACE store DATAFILE '+STORE';
I did all this operations from NODE1.
What is happening now is that everytime I try to read something from new diskgroup FROM NODE2 I get the ORA-01157:
ORA-01157: cannot identify/lock data file 13 - see DBWR trace file
ORA-01110: data file 13: '+STORE/evodb/datafile/store.256.719232707
No problem to read from NODE1.
The simple query on dba_data_file work from NODE1 and fails from NODE2 with the ORA-01157.
I found this on the alert log:
<msg time='2010-05-18T10:06:41.084+00:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='11014'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB2/trace/EVODB2_smon_11014.trc:
ORA-01157: cannot identify/lock data file 13 - see DBWR trace file
ORA-01110: data file 13: '+STORE/evodb/datafile/store.256.719232707'
</txt>
</msg>
And this from the trace:
Trace file /u01/app/oracle/diag/rdbms/evodb/EVODB2/trace/EVODB2_smon_11014.trc
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
With the Real Application Clusters option
ORACLE_HOME = /u01/app/oracle/product/11.1.0/db1
System name: Linux
Node name: node02
Release: 2.6.18-128.7.1.el5
Version: #1 SMP Wed Aug 19 04:00:49 EDT 2009
Machine: x86_64
Instance name: EVODB2
Redo thread mounted by this instance: 2
Oracle process number: 19
Unix process pid: 11014, image: oracle@node02 (SMON)
*** 2010-05-18 10:06:41.084
*** SESSION ID:(151.1) 2010-05-18 10:06:41.084
*** CLIENT ID:() 2010-05-18 10:06:41.084
*** SERVICE NAME:(SYS$BACKGROUND) 2010-05-18 10:06:41.084
*** MODULE NAME:() 2010-05-18 10:06:41.084
*** ACTION NAME:() 2010-05-18 10:06:41.084
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
----- DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- (Action duration in csec: 0) -----
----- END DDE Actions Dump -----
*** 2010-05-18 10:06:41.084
SMON: following errors trapped and ignored:
ORA-01157: cannot identify/lock data file 13 - see DBWR trace file
ORA-01110: data file 13: '+STORE/evodb/datafile/store.256.719232707'
Any suggestion about how to solve the problem?
Thanks in advance!
Samuel

I didn't understand what do you mean with thread...
But I think you found the problem
Initialization files of both ASM instance are: SPFILE='/dev/spfileASM'
that SPFILE is (common for both):
+ASM2.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
+ASM2.asm_diskgroups='ONLINELOG','ARCHIVELOG','DATA'
+ASM1.asm_diskgroups='ONLINELOG','ARCHIVELOG','DATA','STORE'#Manual Mount
*.asm_diskstring='/dev/asm*'
*.cluster_database=true
*.diagnostic_dest='/u01/app/oracle'
+ASM1.instance_number=1
+ASM2.instance_number=2
*.instance_type='asm'
*.large_pool_size=12M
+ASM1.local_listener='LISTENER_ASM'
+AC
Then I executed another query:
From ASM1
SQL> select instance_name from v$instance;
INSTANCE_NAME
+ASM1
SQL> select name, state from v$asm_diskgroup;
NAME STATE
ARCHIVELOG MOUNTED
DATA MOUNTED
ONLINELOG MOUNTED
STORE MOUNTED
SQL>
From ASM2
SQL> select instance_name from v$instance;
INSTANCE_NAME
+ASM2
SQL> select name, state from v$asm_diskgroup;
NAME STATE
ARCHIVELOG MOUNTED
DATA MOUNTED
ONLINELOG MOUNTED
STORE DISMOUNTED
SQL>
Than the question is:
how can I mount the disk group STORE also on ASM2?
I think the problems is into the spfile lines:
+ASM2.asm_diskgroups='ONLINELOG','ARCHIVELOG','DATA'
+ASM1.asm_diskgroups='ONLINELOG','ARCHIVELOG','DATA','STORE'
How can I change the +ASM2.asm_diskgroups value?
Thanks

View Panel : Change color of data values in channel table

Hi,
Is there a way wherein I can change the color of a particular data value or data block in a channel in the VIEW panel and can this be done programtically? I am using DIAdem 2010.
Looking forward for your response
Thanks in advance
Priya

Hi Pria,
There is no way to change the color of various cells in a VIEW table. This can be done (for the text color, not the cell background) in a REPORT table with the help of a customer-defined UserCommand. I can send you an example of this if having the display in REPORT would help.
If you had a newer version of DIAdem, you could embed a SUDialog in a VIEW area, and this SUDialog could have an XTable control that would enable you to show this type of display-- not easy, and not with DIAdem 10.2, but at least something to consider.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to know date and time information from Trace File defaultTrace.X.trc?

Hi, all.
i'm using EP 6.0 SP9 patch 1.
As you know, default trace is written in the <SID>\JC00\j2ee\cluster\server0\log\defaultTrace.X.trc.
By using the default trace formatter, it shows like the following sample messages.
#1.5#0011110E7B2000590000000100000A100003EC71562E6EBC#1104396451585#com.sap.jms.server.ServerClientAdapter##com.sap.jms.server.ServerClientAdapter#Guest#18####716257115a3f11d9b73b0011110e7b20#SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/Applications/JMS#Plain###JMS internal error at ServerClientAdapter! JMS Service is not started!#
My questions are
1. how do we retrieve the date and time information from the above message? It seems that this message has date and time info because LogViewer shows the date and time based on the above message.
2. how do we change the above date format to easier one
like "YYYY:MM:DD:hh:mm:ss"? i know that it can be configured from the Visual Admin --> Services --> Log Configurator but i don't know the exact place for the trace file.
Thanks.

Hi Sejoon,
I use the standalone Logviewer to read the log files. Works great.
"If you have an SAP Web Application Server Java 6.20 or below you may also get a standalone_logviewer.zip file at the SAP Service Marketplace at service.sap.com/download → SAP NetWeaver → Release 04. In this case JDK version 1.3 or higher must be installed on the system. The java version must be same on the server and the client.
In the SAP Web AS Java 6.30 installation a folder named logviewer_standalone can be found under: <path Of J2EE installation>/<SysID>/JC<nr>/j2ee/admin/logviewer_standalone. Verify that the batch file logviewer.bat is installed in the directory logviewer-standalone.
(source -> http://help.sap.com/saphelp_nw04/helpdata/en/e4/540c404a435509e10000000a1550b0/frameset.htm)
Best wishes,
Noel

Generate trace file for a certain transaction by dates

Experts,
I am trying to generate a trace file for a certain transaction for a period of time.
I used tx st03 > transaction profile > double click on transaction and am able to get a list for the day. How do I set the date to generate for the month for example?
Thanks,
Iqbal

Hi Iqbal,
In Tr. ST03 itself, you have three ranges. Day, Week and Month.
Just select the month. Expand it. Select which month you want.
Then check Transaction Profile. It should give you the details for the whole month.
Cheers....,
Raghu

No data in trace file view panels

Similar Messages

Maybe you are looking for