No memory available while committing the changes in Cisco ASA
Hi All,
Recently i have come across an issue that i am unable to do "write mem" shows
No memory available
Error executing command
[FAILED]
Command output of "show flash"
Cisco_ASA# sh flash
--#-- --length-- -----date/time------ path
87 4181246 Jan 01 2003 05:36:00 securedesktop-asa-3.2.1.103-k9.pkg
88 398305 Jan 01 2003 05:36:16 sslclient-win-1.1.0.154.pkg
10 8192 Jan 09 2010 17:27:14 crypto_archive
91 15243264 Sep 08 2011 22:41:58 asa823-k8.bin
3 8192 Sep 09 2011 00:05:38 log
13 8192 Sep 09 2011 00:06:14 coredumpinfo
14 43 Sep 09 2011 00:06:14 coredumpinfo/coredump.cfg
11 8192 Nov 05 2012 14:49:20 snmp
12 4 Oct 26 2014 07:27:27 snmp/single_vf
255426560 bytes total (235053056 bytes free)
Command output of "show memory"
------------------ show memory ------------------
Free memory: 53553752 bytes (20%)
Used memory: 214881704 bytes (80%)
Total memory: 268435456 bytes (100%)
Workaround i found but tried:
1. fsck disk0:
2. del NVRAM
3. Reboot the appliance
4. Checks the command output "show proc mem" and removes the process consumes more memory.
Please suggest.
Hi,
I ran the command "show proc mem" and output as below
sh proc mem
Allocs Allocated Frees Freed Process
(bytes) (bytes)
0 0 0 0 *System Main*
2624 18160168 34 9590 Init Thread
0 0 0 0 PTHREAD-559
0 0 0 0 PTHREAD-560
0 0 0 0 PTHREAD-561
50 1834 4 1098 DATAPATH-0-562
4 4208 0 0 RADIUS Proxy Listener
22 11774 14 2738 rpc_server
1 24 1 24
1 24 1 24 õ–Ñ
1 24 1 24 õ–Ñ
1 24 1 24
1 256 1 256 õ–Ñ
1 128 1 128
œ1B
1 128 1 128 õ–Ñ
1 128 1 128 #¡$
1 24 1 24 õ–Ñ
184555 49957870 267318 314509656 Dispatch Unit
0 0 0 0 pci_nt_bridge
<--- More --->
0 0 0 0 RADIUS Proxy Time Keeper
252 5556233 87 2968910 rtcli async executor process
7 14163 0 0 Integrity FW Task
721 11536 5556 133344 npshim_thread
2 152 0 0 CF OIR
0 0 0 0 TLS Proxy Inspector
1535239 300889297 1544464 296722085 ci/console
1 24 0 0 EAPoUDP-sock
0 0 0 0 netfs_vnode_reclaim
0 0 0 0 lina_int
0 0 0 0 Chunk Manager
0 0 0 0 emweb/cifs_timer
46 308840 0 0 fover_thread
0 0 0 0 EAPoUDP
1 163884 0 0 PIX Garbage Collector
3 8356 0 0 netfs_mount_handler
8 1424854 0 0 lu_ctl
4011 112436 5874 106260 tacplus_get
0 0 0 0 IP Address Assign
2 32 33 91916 arp_timer
0 0 0 0 update_cpu_usage
24638 8120064 5756 2545836 tacplus_snd
1 640 0 0 Reload Control Thread
0 0 0 0 QoS Support Module
<--- More --->
0 0 0 0 arp_forward_thread
0 0 0 0 health_check
266171 2146572 532062 4256496 emweb/https
1931 72317 5793 180476 aaa
0 0 0 0 Client Update Task
0 0 0 0 Lic TMR
266031 2128248 0 0 Timekeeper
6136 199656 5334 190820 ssh/timer
26 1713791 1 32864 UserFromCert Thread
0 0 2 29 Checkheaps
0 0 3 8356 tcp_fast
134 19592 35 36976 NIC status poll
532141 22093933 532117 20499470 Unicorn Proxy Thread
4 1601 0 0 Boot Message Proxy Process
0 0 0 0 tcp_slow
0 0 0 0 vPif_stats_cleaner
104 471734 52 5894 CMGR Server Process
0 0 0 0 udp_timer
94953294 6627914418 94100795 6311417370 snmp
0 0 0 0 CMGR Timer Process
4 1472 0 0 Quack process
0 0 0 0 CTCP Timer process
0 0 0 0 fover_rx
0 0 0 0 Session Manager
<--- More --->
0 0 0 0 L2TP data daemon
0 0 0 0 fover_tx
0 0 0 0 DHCPD Timer
53182 2506750 47747 2408882 ssh
0 0 0 0 L2TP mgmt daemon
0 0 0 0 fover_ip
1 44 0 0 dhcp_daemon
3 330543 0 0 uauth
0 0 0 0 ppp_timer_thread
0 0 0 0 fover_rep
6 940 1 204 NTP
0 0 0 0 Uauth_Proxy
0 0 0 0 vpnlb_timer_thread
0 0 3 32932 fover_parse
1158 3225416 415 6640 listen/ssh
0 0 0 0 dbgtrace
2 641084 0 0 IPsec message handler
0 0 0 0 fover_ifc_test
0 0 0 0 vpnfol_thread_msg
7478 1053822 6869 866536 CTM message handler
0 0 0 0 fover_health_monitoring_thread
0 0 0 0 vpnfol_thread_timer
0 0 0 0 SSL
0 0 0 0 NAT security-level reconfiguration
<--- More --->
0 0 0 0 ha_trans_ctl_tx
0 0 0 0 vpnfol_thread_sync
0 0 0 0 SMTP
0 0 0 0 ICMP event handler
0 0 0 0 ha_trans_data_tx
0 0 0 0 vpnfol_thread_unsent
0 0 0 0 557mcfix
11644672311334183472 6 8736 Logger
0 0 0 0 Dynamic Filter VC Housekeeper
0 0 3 8356 fover_FSM_thread
0 0 0 0 Integrity Fw Timer Thread
0 0 0 0 557statspoll
0 0 0 0 Syslog Retry Thread
49 8172 25 3468 IP Background
0 0 0 0 lu_rx
2 80 0 0 CP Client Process
0 0 0 0 Thread Logger
69658 36029476 6968 16683564 tmatch compile thread
0 0 0 0 lu_dynamic_sync
0 0 0 0 Crypto PKI RECV
0 0 0 0 IP Thread
0 0 0 0 Crypto CA
2 160 1 168 ARP Thread
0 0 0 0 CERT API
<--- More --->
0 0 1 168 icmp_thread
0 0 0 0 uauth_urlb clean
0 0 0 0 udp_thread
0 0 0 0 pm_timer_thread
0 0 0 0 tcp_thread
0 0 0 0 IKE Timekeeper
3182863864172565779055 3299309960 183899839935 SNMP Notify Thread
3 8356 0 0 vpnlb_thread
0 0 0 0 IKE Daemon
4 8404 15 41780 cppoll
2 5664 0 0 block_diag
30 908491 0 0 netfs_thread_init
0 0 0 0 RADIUS Proxy Event Daemon
2 32 0 0 CP Server Process
"show logging " output below
Syslog logging: disabled
Facility: 20
Timestamp logging: enabled
Standby logging: disabled
Debug-trace logging: disabled
Console logging: disabled
Monitor logging: disabled
Buffer logging: level informational, 38815406 messages logged
Trap logging: level informational, facility 20, 38815406 messages logged
Logging to WTBB *.*.*.* errors: 220061 dropped: 2606885
Logging to WTBB *.*.*.* errors: 160 dropped: 1875
Logging to WTBB *.*.*.*
Logging to WTBB *.*.*.*
Logging to WTBB *.*.*.*
History logging: level informational, 38815406 messages logged
Device ID: disabled
Mail logging: disabled
ASDM logging: level informational, 38815406 messages logged
I suspect the process SNMP Notify Thread consumes more memory. Can I reduce trap logging level or disable it for sometime. suggest on this.
Similar Messages
-
Hello All,
I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
It has become critical issue for my production. -
Subject field while creating the change request
Hi All
I want to populate the subject field in the change request by default.Hi
The automatic population of the subject field while creating the CR through folloup transaction from Support message.
Regards
Kumar -
Short Dump while saving the changes in Quotation
Hi abapers,
Please solve my Problem Actually Problem with the Quotation. I have created one SAP Script and attached to VA21. now when I save the Quotation it gets saved byut when I try to open the Quotation in VA22/Va23 first it gives me a short dump but next time it opens up without any short dump.
I get a Short Dump " LOAD_PROGRAM_LOST". Short Description is : "Program "ZZV1SOCONFIRM_INCLUDE" was modified during the run.".
this is just an include which I used it in my SAP Script. Can anybody suggest me what happened with the code.
Below is the Error Anaysis in ST22.
Error analysis
While the program was running, the program "ZZV1SOCONFIRM_INCLUDE" had to be
reloaded
because a bottleneck pushed it out of the local
program buffer. However, the database was found to contain an already
changed program.Hi Mike,
I think by the time you trigger the print out of quotation, Program active version might not be generated. you might have given the print before it gets the active version.
If you are still getting the dump, then it could be problem at output config.
Regards,
Satish -
Problem while commiting the data.
hi,
jdev version:11.1.2.1.0
problem during commit. A popup is shown with following error-----
oracle.jbo.RowInconsistentException: JBO-25014:
Another user has changed the row with primary key oracle.jbo.Key[JK P010M 01 2012-07-19 00:00:00.0 R P JK S ].go through the blog post
it explains why the error message is shown
https://blogs.oracle.com/onesizedoesntfitall/entry/the_case_of_the_phantom
-Rakesh -
Out of memory exception while reading the records in crystal report
hi..
im using sap crystal report version 13.0.2000.0.
i've 27,000 records to be printed but when i run my application
the exception error is displayed "Out Of Memory"..
i've my appliation in VS2010 and OS is server 64bit
and 4GB RAM..
i dont know what to do ...Ok. So this is a brand new report created in CRVS2010(?).
I'd like you to go to the database menu and select "Set Data Source Location". Expand the "Poperties" node and tell me what you see next to "Database Type"
Also, I've also got a bit of a confusion on my part. In the inital post you say:
i've 27,000 records to be printed but when i run my application
the exception error is displayed "Out Of Memory"..
But a bit later on you say:
if there are 8000 records it'll take around 2 minutes
to display the records..
but there are 27000 records it will take more
amount of time and the browser hangsup..
So, is the issue when printing, or viewing?
- Ludek -
'Review Project Details' Link not available while approving the workflow stage
Hi All
I have created a workflow in SharePoint Designer 2013, and deployed it on the PS 2013, and it is working fine. I mean the flow is purely working.
But getting one problem, if you all remember in PS 2010 when we created workflow using the DMDynamicWorkflow solution file, and any stage when sent to some person for approval that time there was a link 'Review Project Details' which shows him all the pages
filled previously in that particular project.
Now in PS2013, it is not happening. I mean I am getting the approval for the stage but I am not able to revisit the PDPs for review before approving a stage.
Does anyone have any suggestion or answers. Pls reply.
Thanks
ManishHi
I guess the person has to visit Project Centre and review the project.
After that she had to navigate to the Workflow Approval page and approve the project.
Thanks
Manish -
How to upgrade the CPU of Cisco ASA 5520?
After installing the new anti virus on all PCs in our company, the CPU usage of our Cisco firewalls increased up to 92%. How can we upgrade the CPU of the device to lower the CPU usage? Thanks.
Hi,
Thanks for the reply. I'm not really into security, I'm more on router & switches. Here is the result of the show command I enter on the ASA. May I ask again for your help.
INTFW# show process cpu-usage non-zero
PC Thread 5Sec 1Min 5Min Process
081aa324 6bdaf870 78.6% 79.0% 78.9% Dispatch Unit
08bd08d6 6bda9210 5.6% 5.6% 5.6% Logger
INTFW# show process cpu-h
Process: snp flow bulk sync, PROC_PC_TOTAL: 12, MAXHOG: 16, LASTHOG: 16
LASTHOG At: 11:27:08 PHST Aug 8 2011
PC: 86badfe (suspend)
Process: vpnfol_sync/Bulk Sync - Import , NUMHOG: 23, MAXHOG: 6, LASTHOG: 6
LASTHOG At: 11:27:17 PHST Aug 8 2011
PC: 80635a5 (suspend)
Traceback: 80635a5 8d9ff96 8062413
Process: vpnfol_sync/Bulk Sync - Import , PROC_PC_TOTAL: 23, MAXHOG: 5, LAS THOG: 5
LASTHOG At: 11:27:17 PHST Aug 8 2011
PC: 8da1592 (suspend)
Process: vpnfol_sync/Bulk Sync - Import , NUMHOG: 23, MAXHOG: 5, LASTHOG: 5
LASTHOG At: 11:27:17 PHST Aug 8 2011
PC: 8da1592 (suspend)
Traceback: 8da1c7e 8d9ff8f 8062413
Process: ssh_init, PROC_PC_TOTAL: 4, MAXHOG: 4, LASTHOG: 3
LASTHOG At: 07:41:20 PHST Aug 18 2011
PC: 806dcd5 (suspend)
Process: ssh_init, NUMHOG: 4, MAXHOG: 4, LASTHOG: 3
LASTHOG At: 07:41:20 PHST Aug 18 2011
<--- More --->
PC: 806dcd5 (suspend)
Traceback: 8b9d3e6 8bab837 8ba024a 8062413
Process: ssh_init, PROC_PC_TOTAL: 90801, MAXHOG: 5, LASTHOG: 2
LASTHOG At: 04:47:28 PHST Apr 5 2012
PC: 8b9ac8c (suspend)
Process: ssh_init, NUMHOG: 90801, MAXHOG: 5, LASTHOG: 2
LASTHOG At: 04:47:28 PHST Apr 5 2012
PC: 8b9ac8c (suspend)
Traceback: 8b9ac8c 8ba77ed 8ba573e 8ba58e8 8ba6971 8ba02b4 8062413
Process: telnet/ci, PROC_PC_TOTAL: 1, MAXHOG: 3, LASTHOG: 3
LASTHOG At: 08:43:18 PHST Apr 16 2012
PC: 8870ba5 (suspend)
Process: telnet/ci, NUMHOG: 1, MAXHOG: 3, LASTHOG: 3
LASTHOG At: 08:43:18 PHST Apr 16 2012
PC: 8870ba5 (suspend)
Traceback: 8870ba5 9298bf1 92789fe 9279191 80ca7e7 80cacbb 80c14b5
80c1c5f 80c2da6 80c3850 8062413
Process: Unicorn Proxy Thread, PROC_PC_TOTAL: 5, MAXHOG: 3, LASTHOG: 2
LASTHOG At: 20:23:09 PHST Apr 27 2012
PC: 8c0e8e5 (suspend)
Process: Unicorn Proxy Thread, NUMHOG: 5, MAXHOG: 3, LASTHOG: 2
LASTHOG At: 20:23:09 PHST Apr 27 2012
PC: 8c0e8e5 (suspend)
Traceback: 8c0e8e5 8c23428 8c24561 8cff99d 8cfdb0c 8cf9f81 8cf9ef5
8cfa9b0 8cec6c9 8cebf7b 8cec22c 8ce5e2f 8d00cfb 8d01d67
Process: Unicorn Proxy Thread, PROC_PC_TOTAL: 12, MAXHOG: 5, LASTHOG: 4
LASTHOG At: 20:23:09 PHST Apr 27 2012
PC: 8c2bb4d (suspend)
Process: Unicorn Proxy Thread, NUMHOG: 12, MAXHOG: 5, LASTHOG: 4
LASTHOG At: 20:23:09 PHST Apr 27 2012
PC: 8c2bb4d (suspend)
Traceback: 8c2bb4d 8c0ef7a 8c11576 8c11625 8c12748 8c140f8 8c0f074
8c23bae 8f2f1f1 8062413
Process: vpnfol_sync/Bulk Sync - Import , PROC_PC_TOTAL: 488, MAXHOG: 100, LASTHOG: 2
LASTHOG At: 02:44:29 PHST May 6 2012
PC: 80635a5 (suspend)
Process: ssh_init, NUMHOG: 461, MAXHOG: 3, LASTHOG: 2
LASTHOG At: 02:44:29 PHST May 6 2012
PC: 80635a5 (suspend)
Traceback: 80635a5 8133d0b 9224474 923d3c8 9239045 9238e95 9226f50
92263d8 92158bf 920530c 922564a 92254c1 9214606 92050bc
Process: snmp, PROC_PC_TOTAL: 52, MAXHOG: 3, LASTHOG: 3
LASTHOG At: 12:39:15 PHST May 7 2012
PC: 8b37300 (suspend)
Process: snmp, NUMHOG: 52, MAXHOG: 3, LASTHOG: 3
LASTHOG At: 12:39:15 PHST May 7 2012
PC: 8b37300 (suspend)
Traceback: 8b37300 8b35d27 8b32e39 8b358c8 8b10b5e 8b0f7bc 8062413
Process: ssh_init, PROC_PC_TOTAL: 43117, MAXHOG: 4, LASTHOG: 2
LASTHOG At: 10:35:55 PHST May 8 2012
PC: 83cf301 (suspend)
Process: ssh_init, NUMHOG: 43117, MAXHOG: 4, LASTHOG: 2
LASTHOG At: 10:35:55 PHST May 8 2012
PC: 83cf301 (suspend)
Traceback: 83cfb25 83c9883 812ea45 89e51b2 89b8dda 8ba0e44 8ba0278
8062413
Process: Dispatch Unit, PROC_PC_TOTAL: 4911194, MAXHOG: 1010, LASTHOG: 3
LASTHOG At: 14:22:15 PHST May 8 2012
PC: 81aa50f (suspend)
Process: Dispatch Unit, NUMHOG: 4501175, MAXHOG: 1010, LASTHOG: 3
LASTHOG At: 14:22:15 PHST May 8 2012
PC: 81aa50f (suspend)
Traceback: 81aa50f 8062413
Process: snmp, PROC_PC_TOTAL: 82902, MAXHOG: 4, LASTHOG: 3
LASTHOG At: 14:25:09 PHST May 8 2012
PC: 8c09598 (suspend)
Process: snmp, NUMHOG: 82902, MAXHOG: 4, LASTHOG: 3
LASTHOG At: 14:25:09 PHST May 8 2012
PC: 8c09598 (suspend)
Traceback: 8b300cd 8b1086d 8b0f7bc 8062413
Process: snmp, PROC_PC_TOTAL: 41500, MAXHOG: 4, LASTHOG: 3
LASTHOG At: 14:25:09 PHST May 8 2012
PC: 8b3709e (suspend)
Process: snmp, NUMHOG: 41500, MAXHOG: 4, LASTHOG: 3
LASTHOG At: 14:25:09 PHST May 8 2012
PC: 8b3709e (suspend)
Traceback: 8b3709e 8b35dcb 8b32e39 8b358c8 8b10b5e 8b0f7bc 8062413
Process: Dispatch Unit, PROC_PC_TOTAL: 50136, MAXHOG: 46, LASTHOG: 2
LASTHOG At: 14:25:12 PHST May 8 2012
PC: 81aa324 (suspend)
Process: Dispatch Unit, NUMHOG: 50136, MAXHOG: 46, LASTHOG: 2
LASTHOG At: 14:25:12 PHST May 8 2012
PC: 81aa324 (suspend)
Traceback: 81aa324 8062413
Process: Dispatch Unit, NUMHOG: 13985647, MAXHOG: 1012, LASTHOG: 3
LASTHOG At: 14:25:43 PHST May 8 2012
PC: 81aa5f9 (suspend)
Traceback: 81aa5f9 8062413
Process: Dispatch Unit, PROC_PC_TOTAL: 18866757, MAXHOG: 1012, LASTHOG: 4
LASTHOG At: 14:25:44 PHST May 8 2012
PC: 81aa5f9 (suspend)
CPU hog threshold (msec): 2.844
Last cleared: None
Thank, -
Hi all,
System is giving dump while saving the changes in the project.
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Profitability segment number 0026636665 does not exist in operating conc
ern XXXX!
Long text of error message:
Diagnosis
The system discovered a serious inconsistency in the data basis of
Profitability Analysis (CO-PA) This message should never occur in
the course of normal operations.
The system tried to find characteristics from the segment table
CE4XXXX using the segment number 0026636665 in operating concern
This profitability segment number does not exist.
This can occur if you have deleted data from table CE4XXXX and have
already assigned data to profitability segments in this operating
concern.
Another cause may be that you have changed the assignment of your
controlling area to an operating concern. When this happens, the
system tries to interpret the segment numbers in the new operating
concern.
System Response
Do not continue processing.
Procedure
The data in the segment table needs to be reconstructed. It may be
possible to re-enter the assignments to profitability segments.
Look in OSS for notes regarding error message KE499. You may find
information there that could help you solve the error.
Otherwise contact your CO-PA consultant or create a problem
message.
Technical information about the message:
Message class....... "KE"
Number.............. 499
Variable 1.......... 0026636665
Variable 2.......... "XXXX"
Variable 3.......... " "
Variable 4.......... " "
Process -
From WBS element user fields, charactertics value are assigned to profitability segment through derivation rule
WBS element values settles to Profitability segmnet.
WBS element has system staus REL ACPT RESA SETC
System is giving dump while saving any changes in the project. can anybody tell what is root cause and solution for this issue?
Thanks,
SudhirRequest you to refer this note 199959. Take help of you CO cosultant.
Edited : Request you to check with your CO consultant as PSG has been deleted, take help fo ABAP as well. ( May be above note may not help you much, WIth help of ABAP and CO define problem and than seach with your message KE499 in Service market place ) That would be better approach.
With Regards
Nitin P.
Edited by: Nitin Patoliya on Mar 10, 2010 5:02 PM -
SAP NAME FILE lock error while creating the TR in development system.
Hi All,
I am getting an error message while saving the changes in my SAP Script that 'SAP names file for <UserId> locked by another process'
The name of the lock file is "/usr/sap/trans/tmp/<UserId>.LOS".
Can any body help me, how to resolve this problem ?
Thanks,Hi Kamlesh,
did you find any solution? I'm getting the same error while a saving the changes in a Dynpro in the ABAP Development Workbench.
Thanks,
Viktor -
hi,
SQL> select *from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
SQL>
i have two session,
in session 1 i updated the table
SQL session1> select *from t;
X
1
2
3
4
5
SQL session1> update t set x=x+10;
5 rows updated.
SQL> commit;
Commit complete.
SQL> select *from t;
X
11
12
13
14
15
after that in session 2 , can i view the old records.even though the session 1 is commited the changes.
SQL> select *from t;
X
1
2
3
4
5
is it possible ??
thanks in advance.Oracle uses undo to rollback transactions and supports flashback queries. To use the feature you must have the EXECUTE previlige on the DBMS_FLASHBACK package.
When you execute flashback query, only the state of the data is chagned. The current system time is used and the current data dictionary is used. If the structure of the table has changed, the query fail.
select *from t as of timestamp; -
No approval workflow found error while processing the Bid Invitation
We are working on SRM 5.0 (SP level6). We are able to create the bid invitations successfully from the sourcing cockpit. However while saving the changes in the bid invitations, system shows the error "No approval workflow found". When checked in SWB_PROCUREMENT , no workflow exists for object" BUS2200, Bid Invitation EC"in the standard SRM.
Kindly confirm what is missing...
NNKHi Nitin,
Use T-code OOCU - Task custamising overview. Then SRM-EBP --> SRM-EBP-WFL then active event linking.
Please activate WS145000026 for automatic approval of bid. or WS145000027 for one step approval of bid invitation.
This will help to solve your problem. IF not please reply me the error.
Regards
Apparao. -
"The Finder does not have enough memory available"
"The Finder does not have enough memory available"
Situation: G4 (AGP Graphics), OS 9.0 with tons of memory.
Problem: Only with any browser viz Explorer, Communicator, iCab or Opera (all versions). Starts off fine. I have broadband. Then steadily goes slower and slower till virtually stops even with just the one browser and one window and no other programs in use. Try to do anything else and above message appears. The problem seems to involves the operating system and the way it interacts with the code of certain sites eg Ebay. It has nothing to do with PRAM, or allocation of memory to the browser or deleting various Preferences. The deletion of Finder, Memory etc Preferences, quitting, restarting all deal with the symptoms and are not a permanent cure. The primary symptom is a massive loss of available memory, not even enough to run a single browser and one window! Any simple solutions? I realise I can upgrade to OS 9.2. Will this work? Apart from this browser problem I am happy with my present set so is there a simpler solution apart from upgrading?Thankyou to all for the welcome and your responses to my query.
I have 640mb of RAM. The problem is intermitent and is determined to a great extent by the sites which I visit. Yahoo for example is great - no problems. In another window visiting eg Ebay will eventually (variable) cause a slowdown. I have switched Virtual Memory on and off, changed cache, program allocations of memory, regularly used Norton Utilies to inspect, repair, defrag etc and looked all over the place for advice. Things run great for a while but it is only a question of time , months or even days, before the problem re-appears. I was surprised to find so little about it on the Web. Perhaps everyone else has upgraded or is on OS X! If I could have done something without upgrading I may have gone for that option as everything else is running like a dream and I want to keep it that way! I use programs such as Paperport (sadly not made for OS X) which I find a marvellous scanning and paperwork management program. To get it to work with OS 9.0 I had to determine with Cassidy & Green's marvellous extension conflict identifier Conflict Catcher that the Control Strip needed disabling. If I upgrade, I could, for Paperport et al, upset the Apple cart! I have also read about a program called Reaper which was used to deal, I believe, with Finder memory problems with OS 7 and OS 8. It is still available on at http://www.versiontracker.com/dyn/moreinfo/macos/3783 Apart from this I know nothing more at present about it.
However, the following was one item which I found of great interest which goes along with your advice of upgrading.
From http://www.icab.de/faq.html#q36
"Mac OS 8/9: Why does iCab 3.0 complain that it is running out of memory all the time?
This is not a bug of iCab, it's a bug of the "classic" MacOS 8.5/8.6 (and maybe OS 9.0 as well). The problem occurs when a web page has web forms with text input fields. The Unicode text input fields (MLTE) of these old MacOS releases do still have some serious bugs. One of theses bugs causes the MacOS to reserve almost all available memory for these text edit fields so there's no memory left for iCab. Apple has fixed this bug in MacOS 9.2.x (maybe in 9.1 as well), so the best solution for this problem would be to upgrade the MacOS. If this is not possible, you can disable the Unicode text input fields in the preferences dialog of iCab in the panel "Operation > Browser, Tabs". Switch off the option "Use Unicode TextEdit" to configure iCab so that it will use the "ancient" text edit fields, which do work OK, but which do not support Unicode".
Here is someone with a similar problem back in 2000:
"From TacitRF
Date: Thurs, Jun 8 2000 12:00am
Email: [email protected] (TacitR)
Groups: comp.sys.mac.system
This is ridiculous! I have hardly touched this machine today. Does RAM get eaten up while the computer is sitting there idle (and sleeping every now and then after I've checked email or looked at a couple newsgroup posts)?
Yes, it can, under certain circumstances.
Open your TCP/IP control panel. Click the Options button. (If there is no Options button, select Edit->User Mode, and click "Advanced.") Is "Load Only When Needed" turned on? If it is, you may severly fragment the memory in your computer every time you start a program that uses the Internet. Let's say, for example, you launch Netscape. Netscape tries to access the Internet. This causes TCP/IP to load, on top of Netscape. Now, when you quit Netscape, the memory it was using may not get freed up. Launch Outlook. It loads TCP/IP. Now, when you quit Outlook, you may not get its memory back either". Try turning off Load Only When Needed in the TCP/IP Options, see if that solves
the problem. Hope that helps!"
I find that whatever I do one way or another the slowdown will eventually reappear. A bit like weeding gardens and washing dishes! Well unless there is a way of dealing with OS 9.0 memory behaviour with browsers it looks like an upgrade will have to do!
Mac OS 9.0.x -
Regarding Memory issues((error) while scheduling the job
Hi Friends
I am facing memory issue while rerunning BODS jobs in production.As we have rapid mart when jobs got failed i rerun the
job suddenly job got failed and in logs i found Memory issue
please help me what i have to do in steps
ThanksI think there is no one solution to buffer pool issue. Buffer pool issue happens due to many reasons like how you design the data flow, requirement of push down or even insufficient memory in the running environment.
You can check by checking 'collect statistics for optimization' during running the job. Also in the data flow, try changing from pageable cache to memory cache by right clicking and selecting properties. The below link give some details on caching, might be helpful.
https://wiki.sdn.sap.com/wiki/display/BOBJ/CachinginDI
Arun -
Error while opening the custom forms-''function not available to this respo
Error: Function not available to this responsibility , change responsibility or contact ur system administrator
Hiiiii,
While accessing the custom forms in release 12i we are facing the popup error and the form is not getting opened up: "Function Not available to this responsibility. Change Responsibilities or Contact your System Administrator"...
I check the custom top path in $APPL_TOP/admin/adovars.env... its fine there..
but the $Apache_top is not there...
can u plz tell me the solution....
Thanks
Meenakshi Vermauser609981 ,
If ur referring to forms, u need to search in appropriate forum, as this forum is only for OAF queries, and if its realted to OAF page, check the the function of oa page is attached to the specific responsibilty .
--Mukul
Maybe you are looking for
-
Multiple Speakers with Airport Express
Since the release of iTunes sometime back in feb/mar, I'm so happy to be able to stream music through multiple speakers in different rooms in my house. However, since I installed the latest iTunesSetup dated 2006-06-28 release v6.05, I am unable to p
-
Workflow for transport request
Hi experts, i want to create a workflow that if any user want to transport the request to the production server then mail shud go to basic administrator for relesed the request. Is any standard worklow exist for this regards Sid
-
Hi, I have a test setup working fine in general with IPV4/IPV6. However, I have one situation where I'd like to do what I do in IPV4 for IPV6 The situation is where an IPV4 SLA pings two IP addresses. Then there are two static routes tracking these t
-
U410 rapid start re-install issue - seriously Lenovo...
please delete
-
Printing from lightroom leaves lines on image
Hi All, I'm using a late 2009 iMac running Lightroom 5.5 and printing to a canon MG7150 photo printer. When i try to print photographs (I'm using Ilford photo paper but the same result happens with normal paper) i get lines across the printed page.