No more publishing

I fail to publish anymore my calendar using my .Mac membership after inadvertely deleting some files in Preferences of the Library. A message indicates that publication failed as .Mac does not respond to the request.
What can I do ?
Thanks

Hello,
Did anyone already experienced this behaviour, this becomes critical for me.
I lost all me news one more time : the xml files are still there, but can not be displayed as news ...
Please help
Vincent

Similar Messages

Yet more publishing errors

I've been playing with iWeb a bit since it was released, and whenever I actually sit down and do some proper web stuff I get publishing errors.
Publishing Error
An error occurred while publishing file "shapeimage2_rollover4.png"
I've had this lots of times now. At first I thought it was me doing something wrong, but now I'm getting very frustrated. I have no idea which file 'shapeimage2_rollover4.png' is, and since this error seems to halt iWeb in its tracks, leaving an unpublished site, what do I do ? I've deleted everything and started again about 4 times now, and now I'm at the point where I'm thinking iWeb is simply too riddled with bugs to be of any value. Does anyone have any idea what I'm doing wrong, or is iWeb just buggy junk ?
Sorry for the sour tone - I'm getting very frustrated.
Powerbook G4 Mac OS X (10.3.7)
Powerbook G4 Mac OS X (10.3.7)
Powerbook G4, PowerMac G5 Dual 2.7 Mac OS X (10.4.4)
Powerbook G4 Mac OS X (10.3.7)

I have been having all the probems as well. My
lastest is "an unknown error occured". So what am I
to do with this?
My issue seems even worse: I can't even publish on local folder. The publish stops at the very same moment, just like if a page or a specific file is corrupted. That's a real bore...
I read in someone responses to
delete all the files on your hard drive, in iWeb,
site and upload agian. I did try that, and seems like
it worked. I may try again. Will let this thread know
what happens.
I did this. It changed... nooooo-thing
I hope they'll fix and improve this. I've bought iLife 06 specifically for iWeb and I just can't use it... Pfew...

How to detect 'publisher gone away'

I've written a simple publish/subscribe solution using a topic as opposed to a queue paradigm. I start the server, establish a JMS destination, etc., etc., then start the client last (of course). All is well.
Now imagine the server gets stopped for some reason. The client carries on regardless. The problem, though, is that when the server restarts, if it tries sending a message to the client, the client never receives it - presumably because the publish/subscribe connection has been lost ??
Is there a simple way (code snippet ?) of the client detecting that it has lost the connection to the publisher it originally connected to ? Some sort of polling mechanism in a separate thread perhaps ?
Gary Roussak

Thanks all for your attention so far - but I'm still struggling.
I certainly believe all the advice you are generously giving me at the moment, but am not sure how it is relevant to me. I am sure I'm probably being stupid here - but as I say, I'm unfamiliar with the real innards of JMS.
Can I ask you to bear with me whilst I try again to explain the detail of my problem ? And, by the way, the problem is not necessarily about detecting that the JMS provider has gone away, but in getting the subscriber to re-connect successfully.
My JMS provider is J2EE itself, i.e. I'm using J2EE 1.3.1 which has its own classes to implement the JMS API.
My solution is extremely unsophisticated at this stage, based as it is on the SimpleTopicPublisher/SimpleTopicSubscriber example code in a JMS tutorial from earlier this year.
I start the J2EE server and then create a 'Topic' (e.g. 'MyTopic').
I now run up the Publisher client I've created. Think of it as a basic Swing GUI which allows the operator to write a message and transmit it. The Publisher does the usual stuff: establish initial context, establish topic conn factory, lookup the topic name, create connection, create session, create publisher, start connection. And then it sits there waiting for an operator to publish. It is coded to properly clear up all JMS resources when it exits.
Next I run up the Subscriber client. It sits invisibly in the background. Set up is a mirror image of the Publisher except of course it creates a subscriber object instead of a publisher object. And that's it - it idles, waiting for onMessage() to be called. The connection is left permanently started. The only extra is this: instead of using your onException() approach, every five seconds, my Subscriber loops around testing to see if it can still get an initial context and then a factory object - temporary ones, not the same as the ones I've already instantiated. Yes - I know this is a horrible way to do it - but it's all I could think of before you told me about onException(). Let's refer to it as my 'test loop'. If it passes, I know everything is OK, if it fails, I know something has gone wrong. And as far as that goes, it DOES work.
I now publish a message and the Subscriber gets it. No problems.
OK. I now quit my Publisher. The test loop in the Subscriber doesn't fail, but that's not a problem because, if I restart my Publisher some seconds or minutes later and try to publish a message, the Subscriber gets it. So I can suffer the Publisher going down without any impact at all on the Subscriber.
I now quit my Publisher. But then I also follow that with a 'j2ee stop' as well so as to simulate the J2EE server box suffering a major problem. The test loop in the Subscriber now fails: it establishes initial context, but fails to establish a factory. Quite understandable. In the meantime, the test loop continues going round every 5 seconds, trying to set up a new initial context, factory, topic, connection, session, etc. And, whilst J2EE remains down, the loop repeatedly fails. Just what I wanted.
Now I restart J2EE (and also start my Publisher client again). However, the test loop in the Subscriber never recovers, i.e. it always establishes initial context, but never re-instantiates a factory object (and thus cannot do the remaining setup steps either, thus it never receives any more published messages of course). And I can't understand why this is the case - why shouldn't the test loop recover fully if I'm doing all the setup steps again ? If I start a brand new Subscriber client process, it works fine. But what's the difference ? New process id ? new threads ? Am I trying to do something that would not be expected to work ? Why ?
And why is this approach important to me ? Because the user whose PC is running the Subscriber client should not be expected to monitor the health of the client. If the client dies, software should be able automate its restart.
Does this explain the situation more ?

Publish Problems

More Publish Problems!
Ok... So now that I have been working on my sites when I publish I get "Publish Error" an unknown? Help... I am using iWeb 1.1.1 and thought that this word be an easy way for students to get access to some pod casts... Now what? This worked before using 1.1.1
Sometimes it works and most of the time it will not publish? What can I do?
Thanks
David
imac G5 and an older G5 + a Powerbook and an iBook Mac OS X (10.4.7)

Oh my god I am not a lunatic idiot after all!
I am currently in discussion with Apple Support for exactly the same problems as you guys, all I did was add a new video to my site. The first few times the update timed out as it was taking more than 30 minutes to upload (I am on broadband and the new page was only 7 meg). Then I got the ".Mac servers were busy please try later" message, then I got the "check your isp.." gubbins. Then when I tried again it said the update was successful but when I visited the site (via a number of different computers and networks) I either could not access the site at all, or it partly loaded, or the welcome page loaded correctly but when going to other pages I got nothing!
I am currently waiting for Apple Support to " get back to me"
MacBook 1.1 White 1.83ghz iBook 12 iBook 14 Mac OS X (10.4.7) Remember, A good friend will bail you out of jail, but a best friend will help you bury the body!

Office 365 publishing site

Hi All,
I have a publishing site in Office 365, and we have created pages, and added content editor web parts in those pages.
Now the requirement is we need to create one more publishing site, and have all those pages with web parts moved to the new Site collection. As we have more than 50 pages, configuring the same will be time consuming. Please assist.
Thanks
Senthu

Hi,
According to your post, my understanding is that you want to create site with all those pages with web parts.
Per my knowledge, when you create a publish site, it will have a “Pages” library.
Though you save the “Pages” library as template in the previous site, you cannot create a new “Pages” library in the new site.
As a workaround, you can create library with another name.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/ab5dd034-bd3d-4cdc-8d4f-d56f032a6a4a/saved-document-library-template-not-visible-in-create-page
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to distinguish between two publish services

Hi,
I have two instances on a published service plugin, but how can I distinguish between them. Currently, I'm accessing the publish service via
activeCatalog:getPublishServices( _PLUGIN.id ) which returns just an array. So far so good. But when I change some settings in the Publishing Manager for "instance-A" everything in "instance-B" is changed to the same values as well.
What I'm doing wrong? Please help!
Thanks,
Lars

It is definitely possible to maintain separate sets of settings for two or more
publish connections of the same publish plug-in.
Without more detail on what exactly your code looks like, it is difficult to say what's not working right.
The contents of 'exportPresetFields' should be maintained on a per-connection basis.

Active Directory replication and login errors (Plz HELP !!)

Hi All,
We have one forest domain (XXXX.LOCAL)and lots of child domains (XXX.XXXX.LOCAL).
We are facing issue that child domains are not able to login with forest administrator account and there are also lots of replication errors.
Exchange OWA gives error of not able to find particular XXX.XXX.local child domain.
dcdiag from child domain is :
C:\Windows\system32>
C:\Windows\system32>nltest.exe /dsregdns
Flags: 0
Connection Status = 1311 0x51f ERROR_NO_LOGON_SERVERS
The command completed successfully
C:\Windows\system32>nltest.exe /dsregdns
Flags: 0
Connection Status = 1311 0x51f ERROR_NO_LOGON_SERVERS
The command completed successfully
C:\Windows\system32>
C:\Windows\system32>dcdiag
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = PMA-DC01
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: HEC-CITY\PMA-DC01
      Starting test: Connectivity
         ......................... PMA-DC01 passed test Connectivity
Doing primary tests
   Testing server: HEC-CITY\PMA-DC01
      Starting test: Advertising
         Warning: PMA-DC01 is not advertising as a time server.
         ......................... PMA-DC01 failed test Advertising
      Starting test: FrsEvent
         ......................... PMA-DC01 passed test FrsEvent
      Starting test: DFSREvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared. Failing SYSVOL replication problems may cause
         Group Policy problems.
         ......................... PMA-DC01 failed test DFSREvent
      Starting test: SysVolCheck
         ......................... PMA-DC01 passed test SysVolCheck
      Starting test: KccEvent
         ......................... PMA-DC01 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         [PMA-DC02] DsBindWithSpnEx() failed with error -2146893022,
         The target principal name is incorrect..
         Warning: PMA-DC02 is the PDC Owner, but is not responding to DS RPC
         Bind.
         [PMA-DC02] LDAP bind failed with error 8341,
         A directory service error has occurred..
         Warning: PMA-DC02 is the PDC Owner, but is not responding to LDAP
         Bind.
         Warning: PMA-DC02 is the Rid Owner, but is not responding to DS RPC
         Bind.
         Warning: PMA-DC02 is the Rid Owner, but is not responding to LDAP
         Bind.
         Warning: PMA-DC02 is the Infrastructure Update Owner, but is not
         responding to DS RPC Bind.
         Warning: PMA-DC02 is the Infrastructure Update Owner, but is not
         responding to LDAP Bind.
         ......................... PMA-DC01 failed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... PMA-DC01 passed test MachineAccount
      Starting test: NCSecDesc
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         Fatal Error: Cannot retrieve SID
         ......................... PMA-DC01 failed test NCSecDesc
      Starting test: NetLogons
         ......................... PMA-DC01 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... PMA-DC01 passed test ObjectsReplicated
      Starting test: Replications
         [Replications Check,Replications Check] Inbound replication is
         disabled.
         To correct, run "repadmin /options PMA-DC01 -DISABLE_INBOUND_REPL"
         [Replications Check,PMA-DC01] Outbound replication is disabled.
         To correct, run "repadmin /options PMA-DC01 -DISABLE_OUTBOUND_REPL"
         ......................... PMA-DC01 failed test Replications
      Starting test: RidManager
         ......................... PMA-DC01 failed test RidManager
      Starting test: Services
            w32time Service is stopped on [PMA-DC01]
         ......................... PMA-DC01 failed test Services
      Starting test: SystemLog
         A warning event occurred. EventID: 0x00000010
            Time Generated: 04/21/2014   19:16:04
            Event String:
            Unable to Connect: Windows is unable to connect to the automatic upd
ates service and therefore cannot download and install updates according to the
set schedule. Windows will continue to try to establish a connection.
         An error event occurred. EventID: 0x0000168E
            Time Generated: 04/21/2014   19:44:42
            Event String:
            The dynamic registration of the DNS record '_kerberos._tcp.dc._msdcs
.PMA.XXXX.LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.' failed on the fol
lowing DNS server:
         An error event occurred. EventID: 0x0000168E
            Time Generated: 04/21/2014   19:44:43
            Event String:
            The dynamic registration of the DNS record '_kerberos._tcp.PMA.XXXX.
LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.' failed on the following DNS
server:
         An error event occurred. EventID: 0x0000168E
            Time Generated: 04/21/2014   19:44:43
            Event String:
            The dynamic registration of the DNS record '_kerberos._tcp.HEC-LAHOR
E._sites.PMA.XXXX.LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.' failed on
the following DNS server:
         An error event occurred. EventID: 0x0000168E
            Time Generated: 04/21/2014   19:44:43
            Event String:
            The dynamic registration of the DNS record '_kerberos._udp.PMA.XXXX.
LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.' failed on the following DNS
server:
         An error event occurred. EventID: 0x0000168E
            Time Generated: 04/21/2014   19:44:43
            Event String:
            The dynamic registration of the DNS record '_kpasswd._tcp.PMA.XXXX.L
OCAL. 600 IN SRV 0 100 464 PMA-DC01.PMA.XXXX.LOCAL.' failed on the following DNS
server:
         An error event occurred. EventID: 0x0000168E
            Time Generated: 04/21/2014   19:44:43
            Event String:
            The dynamic registration of the DNS record '_kpasswd._udp.PMA.XXXX.L
OCAL. 600 IN SRV 0 100 464 PMA-DC01.PMA.XXXX.LOCAL.' failed on the following DNS
server:
         An error event occurred. EventID: 0x0000168E
            Time Generated: 04/21/2014   19:44:43
            Event String:
            The dynamic registration of the DNS record '_kerberos._tcp.HEC-LAHOR
E._sites.dc._msdcs.PMA.XXXX.LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.'
failed on the following DNS server:
         An error event occurred. EventID: 0x00000C8A
            Time Generated: 04/21/2014   19:44:51
            Event String:
            This computer could not authenticate with \\LHR-DC01.XXXX.LOCAL, a W
indows domain controller for domain XXXX, and therefore this computer might deny
logon requests. This inability to authenticate might be caused by another compu
ter on the same network using the same name or the password for this computer ac
count is not recognized. If this message appears again, contact your system admi
nistrator.
         An error event occurred. EventID: 0xC00A0038
            Time Generated: 04/21/2014   19:46:02
            Event String:
            The Terminal Server security layer detected an error in the protocol
stream and has disconnected the client. Client IP: 10.87.193.37.
         An error event occurred. EventID: 0x40000004
            Time Generated: 04/21/2014   19:52:41
            Event String:
            The Kerberos client received a KRB_AP_ERR_MODIFIED error from the se
rver pma-dc02$. The target name used was PMA\PMA-DC02$. This indicates that the
target server failed to decrypt the ticket provided by the client. This can occu
r when the target server principal name (SPN) is registered on an account other
than the account the target service is using. Please ensure that the target SPN
is registered on, and only registered on, the account used by the server. This e
rror can also happen when the target service is using a different password for t
he target service account than what the Kerberos Key Distribution Center (KDC) h
as for the target service account. Please ensure that the service on the server
and the KDC are both updated to use the current password. If the server name is
not fully qualified, and the target domain (PMA.XXXX.LOCAL) is different from th
e client domain (PMA.XXXX.LOCAL), check if there are identically named server ac
counts in these two domains, or use the fully-qualified name to identify the ser
ver.
         A warning event occurred. EventID: 0x8000001C
            Time Generated: 04/21/2014   19:53:42
            Event String:
            When generating a cross realm referal from domain XXXX.LOCAL the KDC
was not able to find the suitable key to verify the ticket. The ticket key vers
ion in the request was 25 and the available key version was 22. This most common
reason for this error is a delay in replicating the keys. In order to remove th
is problem try forcing replication or wait for the replication of keys to occur.
         An error event occurred. EventID: 0x40000004
            Time Generated: 04/21/2014   20:13:25
            Event String:
            The Kerberos client received a KRB_AP_ERR_MODIFIED error from the se
rver pma-dc02$. The target name used was LDAP/4a166db9-c39c-4069-99e7-8a233ce2c0
be._msdcs.XXXX.LOCAL. This indicates that the target server failed to decrypt th
e ticket provided by the client. This can occur when the target server principal
name (SPN) is registered on an account other than the account the target servic
e is using. Please ensure that the target SPN is registered on, and only registe
red on, the account used by the server. This error can also happen when the targ
et service is using a different password for the target service account than wha
t the Kerberos Key Distribution Center (KDC) has for the target service account.
Please ensure that the service on the server and the KDC are both updated to us
e the current password. If the server name is not fully qualified, and the targe
t domain (PMA.XXXX.LOCAL) is different from the client domain (PMA.XXXX.LOCAL),
check if there are identically named server accounts in these two domains, or us
e the fully-qualified name to identify the server.
         An error event occurred. EventID: 0x40000004
            Time Generated: 04/21/2014   20:13:25
            Event String:
            The Kerberos client received a KRB_AP_ERR_MODIFIED error from the se
rver pma-dc02$. The target name used was ldap/pma-dc02.pma.XXXX.LOCAL. This indi
cates that the target server failed to decrypt the ticket provided by the client
. This can occur when the target server principal name (SPN) is registered on an
account other than the account the target service is using. Please ensure that
the target SPN is registered on, and only registered on, the account used by the
server. This error can also happen when the target service is using a different
password for the target service account than what the Kerberos Key Distribution
Center (KDC) has for the target service account. Please ensure that the service
on the server and the KDC are both updated to use the current password. If the
server name is not fully qualified, and the target domain (PMA.XXXX.LOCAL) is di
fferent from the client domain (PMA.XXXX.LOCAL), check if there are identically
named server accounts in these two domains, or use the fully-qualified name to i
dentify the server.
         ......................... PMA-DC01 failed test SystemLog
      Starting test: VerifyReferences
         ......................... PMA-DC01 passed test VerifyReferences
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : PMA
      Starting test: CheckSDRefDom
         ......................... PMA passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... PMA passed test CrossRefValidation
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running enterprise tests on : XXXX.LOCAL
      Starting test: LocatorCheck
         ......................... XXXX.LOCAL passed test LocatorCheck
      Starting test: Intersite
         ......................... XXXX.LOCAL passed test Intersite
C:\Windows\system32>

There are a number of things that can cause this, such as:
DNS is misconfigured to support a parent-child-additional tree forest.
Incorrect DNS zone replication scope for the design, which points back to the point #1.
AD Sites are misconfigured for the physical environment. For example if you have a hub and spoke physical environment, you can't use the default settings that bridge all sites (BASL) and must individually configure them.
Incorrect DNS settings on the DCs.
Multi-homed DCs.
Time service is not configured properly and/or syncing from the VM host, which should be configured otherwise (Microsoft, VMware and Citrix have KBs explaining this).
Default security settings at either the parent, child or both domains, have been altered.
Firewalls between DCs, such as perimeter firewalls, or installed antivirus protection features if not excluded on DCs properly, will cause this, too.
That's the short list. If you can describe some of the points above, it may help us pinpoint where the issue may be.
Some links that may help understand some of the bullet points:
AD Site Design, DNS & the DC Locator Process, and Auto Site Link Bridging, or Bridge All Site Links (BASL)
http://blogs.msmvps.com/acefekay/2013/02/24/ad-site-design-and-auto-site-link-bridging-or-bridge-all-site-links-basl/
DNS Design Options in a Multi-Domain Forest - How to create a Parent-Child DNS Delegation, and How to Configure DNS to create a new Tree in the Forest
Published by Ace Fekay, MCT, MVP DS on Oct 1, 2010 at 12:22 PM
http://msmvps.com/blogs/acefekay/archive/2010/10/01/dns-parent-child-dns-delegation-how-to-create-a-dns-delegation.aspx
Configuring the Windows Time Service for Windows 2000, 2003, 2008 and newer, explanation of the time service hierarchy, and more
Published by Ace Fekay, MCT, MVP DS on Sep 18, 2009 at 8:14 PM 3050 1
http://msmvps.com/blogs/acefekay/archive/2009/09/18/configuring-the-windows-time-service-for-windows-server.aspx
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

KMS server: Office2010 & Win7 react in different ways...

Hi,
we have a virtual infrastructure using Win7 and Office 2010.
Before introducing Office2010, the KMS host was on a Win2008 server, then we decided to move it to a Win7 machine with the Office2010 extension installed. KMS functions were disabled from the Win2008 server.
What happens now is that Win7 OSs are regularly activated by KMS, while Office2010 installations are not... we have verified that the old KMS is no more publishing itself on DNS and that the correct DNS entry is present for the Win7 KMS host. Using nslookup
for further verification also gives the correct results.
Nevertheless, Office 2010 is unable to activate itself on the desktops. We are able to activate the Office2010 instances just using the VAMT tool, forcing the KMS activation for the selected desktops AND manually forcing the IP of the KMS server: when leaving
the tool search the KMS (using the DNS), it fails. Since (as stated before) nslookup gives the expected results (on the same machine where VAMT is installed and failing!), we really don't know what to do... everything seems to be ok, but actually it isn't:
where?
Thank you for your help

I was just looking through questions with no replies. Do you still need assistance with this issue?
Chris Ream

Archive not linking ;(

hiya -- all of sudden during my last publish the 'see older posts' which is still linked to my archive doesn't work. when it publishes and you click on 'see older posts' it's a dead link. in iWeb i can see the entire archive.. though it is not publishing? any help is greatly appreciated thanks!
site is here: http://www.randioh.com

randimac wrote:
...it flippin' worked!
Randi ~ Glad to hear the +Publish All+ fixed it.
randimac wrote:
i plan on moving to wordpress.. it's just getting it installed...
Just to be clear: there's no app to be installed — simply sign up for a free, web-based blog. (No more +Publish All+ — at least for the blog!)
randimac wrote:
...and trying to convert some of this blog to it.. any tips on that?
No, sorry — WordPress can't import iWeb blogs so I suppose you'll have to copy & paste. You've probably already seen these links, but for other readers:
http://support.wordpress.com/getting-started
Some of their design themes have tabs:
http://mistylook.org
It's also possible to make a tab link directly to an external URL, such as your iWeb site — see HERE.
And an example of customizing that MistyLook theme:
http://bamboofetish.com

Cp6 - Have I reached the 'limits' of what can be done with Captivate?

Earlier, I wrote about a crashing problem with Captivate: http://forums.adobe.com/thread/1140677
But it seems that the extra slides I have added have brought Captivate down to being so slow, it is unusable.
To get to the bottom of what is causing the problem; I started by hiding about 1/2 the slides and then publish, everything work... the course is responsive. Then I unhide a few more, publish again, and repeat. What I am noticing is that the responsiveness gradually becomes slower and slower.
At 22 slides, the course is already beginning to show some sluggishness; at 40 slides, the course is impossible to run (see my above listed thread).
What the heck is going on? This is unacceptable!
Have I done something wrong along the way? Is anyone else out there using Captivate to build full self-paced training?
I still need to insert another 15 slides before this course is complete but seem to have hit a roadblock!
I have also tested externalizing much of the content but that had zero affect!
Any advice?
BTW:
- Total size of project folder (components are externalized): about 5MB
- The course is self-paced, meaning that I use custom FORWARD/BACK button for navigation. I am not using a skin with a playbar.
- I have very few animations/aka Effects
Thank you,
Shawn

Thank you for your reply Andy.
(BTW- if you notice any weirdness in my reply - I am on my iPhone and mobile Safari isn't entirely compatible with this forum)
I agree, it isn't the number of slides that is the problem but perhaps it is the type of slide. I have 10 min video simulations of well over 100 slides that function perfectly.
However, this is my first time building an entire course in Captivate and I have noticed a trend in the course slowing down which each addition to the content.
Because this is self-paced with custom nav buttons (no playbar), each slide button controls pause at 2 sec (unless there is an Effect on the slide and more time is required). Typically, each of the 30-40 slides is between 2-4 seconds.
The learners can only jump to a specific slide via the TOC.
IMPORTANT NOTE: when I posted this message, there was a 6 second delay from clicking a nav button and the next slide appearing. However, since deleting 9 Smart Shapes (that acted as a topic menus that allowed the learner to jump to specific topics) - I have since replaced these Smart Shapes with simple bullets and all Jump To's removed. As a result, the unacceptable 6 second delay is reduced to about 2.5 seconds. Still not good but a significant improvement.
I have no audio but I do have inserted SWF software simulations. It is important to point out that removal of the sims had no affect on the responsiveness.
The poor responsiveness spans all tested systems both from with Captivate and as a published SWF (with and without externalizing resources).
Hosted on AICC LMS but in this situation, not relevant. :)
Thanks for your advice.

IWeb 1.1 SOLUTION FOR DOTMAC USERS???

Hi, here is a possible solution for people publishing to dotmac.
In iWeb, publish your site to a folder - save it somewhere on your system.
There should be TWO items: your "site" folder and an index.html file.
Navigate to your iDisk/Web/Sites/iWeb and locate your site folder AND an index.html.
Make sure you are IN the iWeb folder.
REMOVE these TWO items (YOU CAN TRASH THEM, BUT BEST MOVE THEM SOMEWHERE SAFE). This may take some time - site size and internet speeds.
Now copy the two items: (your "site" folder and an index.html file) that you previously publishedto your system, INTO THE IWEB FOLDER ON YOUR IDISK. Once again this may take some time ("zo find zomething else to do...").
If you find that there is no iWeb folder on your iDisk, have another go at trying to publish from iWeb to your dotmac. When it fails there is a good chance that at least it will have got as far as creating it - NOW REPEAT ABOVE.
Hope this helps, it worked for me, see: Recordiauawen.com
Good luck

I'm glad this is working for you. Can you tell us if
this method breaks any of the .Mac exclusive
features? Like search or counters, or password
protection, maybe slideshow functionality? I'm
thinking that it might because you are publishing to
a folder first, so iWeb might not include those
things tied in with .Mac.
==> www.DirtDoog.com <==</a>
Place A Virtual Pin On Putt-Putt's
GuestMap!
I reckon that publishing this way should enable ALL of the features that you would normally expect on your site. The downside is that it can all take a long time to do, unlike publishing straight out of iWeb - therefore, try and make sure that you've DOUBLE CHECKED all your stuff, (links, spelling etc) otherwise changing one word etc, may take some time.
I must confess that I haven't implemented any of the new features included
with the 1.1 update - so I couldn't say as to wether these work or not.
It would appear that other people are having problems with these new features, these may be bugs or just more publishing issues.
Possibly, try to return your site to its pre 1.1 state and then try the 'solution'
For me at least it allowed me to reinstate the site after my first attempt to publish in 1.1 totally ruined it. (things all out of place etc etc.)
G5 Dual 2.0 Mac OS X (10.4.6)

NI 1772 VBAI Webserver

Hello
we are using the NI1772, CVI 2012 and VBAI 2012 for an application. On the smart cam 1772 we have a webserver to publish pictures. With the cvi2012 application we publish these pictures with an IE Active X. This application worked for several months in a very good way. No we have a problem that the picture are not more published correctly. Instead of the pictures we get a strange IE view (attached to this post). The application itself is still running correctly but the pictures are not more published.
Does anyone have an idea what could happened?
thanks
Oliver
Attachments:
Screenshot.JPG ‏18 KB

Hello Brad,
no we didn't do anything. This happened on a start on a monday morning. The system is shut down over the weekend. It ran for months, windows updates were all disactivated. No changes.
Meanwhile we tried several time to push the three buttons and then the picture came back, but on the wrong position. We made a restart and the picture appeared again, but still on the wrong position.
This is very strange, the application ran for months, the stuck, we re-installed several time the camera new, nothing happened and now the picture is back but on the wrong position. OK, the application ran again, and the wrong position of the picture is only cosmetic but we do not have any idea why this happened.
Do you have any ideas?
thanks
Oliver

IDVD won't install from iLife '09 disk

Are there any reports of bad iLife '09 DVD pressings? I just tried to install iLife on two of my late model Macs- a Dual 2.3GHz Power Mac G5 (Late 2005) with Superdrive, and an Intel iMac 24" (Mid-2007) model- and the installer grayed out the iDVD selection in the Custom Install on both machines, telling me that it could only install iDVD on Macs with a SuperDrive. WTH? They BOTH have SuperDrives, and they each have an install of iDVD from iLife '08. I know that these SuperDrives both work, because I've used iDVD to burn DVDs on both of them. What am I missing?

Honestly I don't know if iDvd'08 vs. iDvd'09 are the very same version. But they are very close. Not much has changed if you are looking at iDvd alone. Still no blu-ray support within either version. Seems to me that Roxio Toast and it's Blu-ray plug in, picks up where iDvd left off (with the exception of Apple's Final Cut Studio which is much more money and has rather large learning curve).
Btw, this is not intended to compare Toast with iDvd since really one is authoring software vs. a disc burning utility. It's like comparing apples and oranges (no pun intended). However, Toast is getting more improvements lately vs. iDvd.
Did a search on Yahoo and here's what came up which seems like a valid assessment:
iLife '09 isn't as large of an update as previous iLife releases. In fact, iDVD was hardly changed, if at all. GarageBand received a facelift and has a bunch of new features, probably the most prominent of which being the artist lessons. iMovie got a few new features like image stabilization, themes and more, and isn't as annoying to use as the previous version. iPhoto got a lot of small tweaks, as well as the Faces and Places features and integration with Facebook and Flickr. iWeb also got a few enhancements, like more themes, more publishing options, and more widgets.
As for which is better, go with iLife '09. Both are good suites of applications, but if you have the money, go ahead and upgrade. The few new features you'll find are worth it.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Confused... JPG with Transparency in Flash?

Hi,
I am working in Flash 8 on a PC. I have a cut out image of a
person's head, that is sitting on a layer above a background
graphic on a lower layer. When I look at the head image's bitmap
properties, it tells me it is a JPG (I pasted it in from
Fireworks). Q. :: How can the image have transparent areas (i.e.
the cut out region around the head) when it is a JPG? It works
well, but I want to make the head image an external JPG, and can't
figure out how to get te same effect. (I don't want to use GIF as
the image of the head is a photographic image.)
Perhaps it is possible to import a PNG into Flash with a
transparency? ... in Flash 6 player?
Thanks for your help.
Geoff

> Perhaps the file is in JPG form with a black
> background, and Flash knows to make the black an alpha
channel somehow?
Yes .. that is what it does.
When you imported the image in a format that must have had
transparency,
Flash was able to get that set up internally.
For those who want to know more, published SWF files can only
have four
image formats in them
1) zip compressed 8-bit image (with or without alpha)
2) zip compressed 16-bit image (no alpha)
3) zip compressed 32-bit image (with or without alpha)
4) jpeg compressed image (with or without zipped alpha)
Jeckyl

Client framework within SSIS to Access OData Remote Host

I need some advice on which direction to go regarding the best way to import data from an OData remote host to an mssql2012 instance. On average the data that I would need to import consists of 15 data objects, 8 of which require about 14,000 rows averaging
about 1,200 bytes per row. The other remaining objects average about 1/3 of that. This will execute about 4 times per day.
I have created an SSIS controller package using C# scripting with the System.Net.Http classes as a POC, which manages the thresholds and parallelism of accessing and writing the data. This was developed on the Visual Studio version 12 IDE, some of which
I made visible here: (Stackoverflow Code Review ) . The code works, however, there are timeouts that manifest as thread
drops/task cancellations, etc. during peak operational hours.
It is time for me to refactor this package in such a way, that it can be used as an OData pattern we can use in our shop going forward. I am uncertain how to address this challenge. There are conflicting references online--some approaches lean toward
WCF, others point out newer asp.net OData assemblies, etc. I am unclear on Microsoft's direction regarding OData consumption of remote data. There is more published clarity on providing OData services as a provider for clients to consume.
The more ideas, thoughts, etc. that I hear from this community the better! :)

Arthur,
Yes, there have been timeout occurrences. I've addressed these by switching up asynch calls to bisynch calls where I wait for return communication--then manage the result accordingly.
I am doing all of the OData data retrieval and session management through c# tasks within SSIS as an http client to the remote host.
The OData component you and David mentioned is not included in this POC because I was unable to get it to connect to the 3rd party uri without throwing an xml parsing error on connect attempts. I was however, able to use the OData component in another SSIS
package connecting to Sharepoint as service documents. I don't have that option for the 3rd party objects.
This is less of a question and more of an open discussion. Faced with an OData component that isn't working in SSIS, what approach would you take?

No more publishing

Similar Messages

Maybe you are looking for