No Open If Statement
Hi,
In my program, Iam getting the error that 'no open if statement'.Please correct me.
Also please let me know the functionality of hide statement in this progra,.
REPORT ZMTSHPRG7 .
TYPES:
BEGIN OF TY_KNA1,
KUNNR TYPE KNA1-KUNNR,
LAND1 TYPE KNA1-LAND1,
NAME1 TYPE KNA1-NAME1,
ORT01 TYPE KNA1-ORT01,
END OF TY_KNA1,
BEGIN OF TY_VBAK,
VBELN TYPE VBAK-VBELN,
AUDAT TYPE VBAK-AUDAT,
AUART TYPE VBAK-AUART,
NETWR TYPE VBAK-NETWR,
END OF TY_VBAK,
BEGIN OF TY_VBAP,
POSNR TYPE VBAP-POSNR,
MATNR TYPE VBAP-MATNR,
ARKTX TYPE VBAP-ARKTX,
NETPR TYPE VBAP-NETPR,
NETWR TYPE VBAP-NETWR,
END OF TY_VBAP.
DATA:
ST_KNA1 TYPE TY_KNA1,
IT_KNA1 TYPE TABLE OF TY_KNA1,
ST_VBAK TYPE TY_VBAK,
IT_VBAK TYPE TABLE OF TY_VBAK,
ST_VBAP TYPE TY_VBAP,
IT_VBAP TYPE TABLE OF TY_VBAP.
SELECT-OPTIONS:
SKUNNR FOR ST_KNA1-KUNNR.
START-OF-SELECTION.
PERFORM GETCUSTDATA.
IF IT_KNA1 IS NOT INITIAL.
LOOP AT IT_KNA1 INTO ST_KNA1.
WRITE:/ SY-VLINE,1 ST_KNA1-KUNNR,SY-VLINE, 12 ST_KNA1-NAME1, SY-VLINE,42
ST_KNA1-ORT01, SY-VLINE, 62 ST_KNA1-LAND1, SY-VLINE.
ENDLOOP.
ENDIF.
TOP-OF-PAGE.
WRITE:/ SY-VLINE,1 'CUSTOMER NUMBER',SY-VLINE, 12 'CUSTOMER NAME',
SY-VLINE, 42 'CITY',SY-VLINE, 62 'COUNTRY',SY-VLINE.
ULINE.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
WRITE:/ 'READY TO DISPLAY DETAILS'.
ENDCASE.
HIDE ST_KNA1-KUNNR.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
SELECT VBELN AUDAT AUART NETWR FROM VBAK INTO TABLE IT_VBAK
WHERE KUNNR EQ ST_KNA1-KUNNR.
IF SY-SUBRC EQ 0.
LOOP AT IT_VBAK INTO ST_VBAK.
WRITE:/ ST_VBAK-VBELN, 12 ST_VBAK-AUDAT, ST_VBAK-AUART , ST_VBAK-NETWR.
ELSE.
MESSAGE S000(0) 'WITH NO ORDERS FOUND FOR THIS CUSTOMER'.
ENDLOOP.
ENDIF.
ENDCASE.
*& Form GETCUSTDATA
text
--> p1 text
<-- p2 text
FORM GETCUSTDATA .
SELECT KUNNR LAND1 NAME1 ORT01 FROM KNA1
INTO TABLE IT_KNA1
WHERE KUNNR IN SKUNNR.
ENDFORM. " GETCUSTDATA
TYPES:
BEGIN OF TY_KNA1,
KUNNR TYPE KNA1-KUNNR,
LAND1 TYPE KNA1-LAND1,
NAME1 TYPE KNA1-NAME1,
ORT01 TYPE KNA1-ORT01,
END OF TY_KNA1,
BEGIN OF TY_VBAK,
VBELN TYPE VBAK-VBELN,
AUDAT TYPE VBAK-AUDAT,
AUART TYPE VBAK-AUART,
NETWR TYPE VBAK-NETWR,
END OF TY_VBAK,
BEGIN OF TY_VBAP,
POSNR TYPE VBAP-POSNR,
MATNR TYPE VBAP-MATNR,
ARKTX TYPE VBAP-ARKTX,
NETPR TYPE VBAP-NETPR,
NETWR TYPE VBAP-NETWR,
END OF TY_VBAP.
DATA:
ST_KNA1 TYPE TY_KNA1,
IT_KNA1 TYPE TABLE OF TY_KNA1,
ST_VBAK TYPE TY_VBAK,
IT_VBAK TYPE TABLE OF TY_VBAK,
ST_VBAP TYPE TY_VBAP,
IT_VBAP TYPE TABLE OF TY_VBAP.
SELECT-OPTIONS:
SKUNNR FOR ST_KNA1-KUNNR.
START-OF-SELECTION.
PERFORM GETCUSTDATA.
IF IT_KNA1 IS NOT INITIAL.
LOOP AT IT_KNA1 INTO ST_KNA1.
WRITE:/ SY-VLINE,1 ST_KNA1-KUNNR,SY-VLINE, 12 ST_KNA1-NAME1, SY-VLINE,42
ST_KNA1-ORT01, SY-VLINE, 62 ST_KNA1-LAND1, SY-VLINE.
HIDE ST_KNA1-KUNNR.
ENDLOOP.
ENDIF.
TOP-OF-PAGE.
WRITE:/ SY-VLINE,1 'CUSTOMER NUMBER',SY-VLINE, 12 'CUSTOMER NAME',
SY-VLINE, 42 'CITY',SY-VLINE, 62 'COUNTRY',SY-VLINE.
ULINE.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
WRITE:/ 'READY TO DISPLAY DETAILS'.
ENDCASE.
*AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 2.
SELECT VBELN
AUDAT
AUART
NETWR FROM VBAK
INTO TABLE IT_VBAK
WHERE KUNNR EQ ST_KNA1-KUNNR.
IF SY-SUBRC EQ 0.
LOOP AT IT_VBAK INTO ST_VBAK.
WRITE:/ ST_VBAK-VBELN, 12 ST_VBAK-AUDAT, ST_VBAK-AUART , ST_VBAK-NETWR.
ENDLOOP.
ELSE.
MESSAGE S002(ZRMSG).
ENDIF.
ENDCASE.
*& Form GETCUSTDATA
text
--> p1 text
<-- p2 text
FORM GETCUSTDATA .
SELECT KUNNR LAND1 NAME1 ORT01 FROM KNA1
INTO TABLE IT_KNA1
WHERE KUNNR IN SKUNNR.
ENDFORM. " GETCUSTDATA
Similar Messages
-
From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?
You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon. -
I downloaded Firefox 5.0. Firefox will not open. States running offline. I have a Intel Pentium/Windows XP system.
This also happened when I tried to download Firefox 4.
Firefox 3.6.18 works fineYou may need to delete the Firefox program folder before (re)installing the latest Firefox.<br />
In case you still have problems after installing then check your security software.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Browser_will_not_start_up -
TestStand Open SQL Statement does not support SQL's ORDER BY clause???
TestStand 1.0.3
Windows 2000 SP1
SQL Server 2000 Personal
You've got to be kidding me...
It appears that the built-in TestStand Open SQL Step does NOT support the
"ORDER BY" clause in the SELECT statement, even though the documentation
says it does. Is this true?
I have an Open SQL Statement query:
"SELECT * FROM [MyTable] WHERE ([Batch ID]=1234)"
it works fine, returning a correct record count 120 records. If I change
the Open SQL Statement query simply by adding an ORDER BY clause, such as:
"SELECT * FROM [MyTable] WHERE ([Batch ID]=1234) ORDER BY [MyField] ASC"
it returns a record count of zero. I know that "MyField" exists in the
MyTable table and contains valid data. The
second query works fine in SQL
Server Enterprise Manager.
Am I missing something? Is it true that the TestStand Open SQL Step does
NOT support the "ORDER BY" clause? If not, what &#$!ing good is it and why
does the manual state it is supported? Is there any other way using just
the TestStand steps to order a database recordset on one or more fields?
Any help would be appreciated.
Grrrrr....
Bob Rafuse
Etec Inc.> Bob -
> The database step types do not do anything special to the SQL command
> that you give it. The step just passes the command to the ADO
> provider. I tried a simple query using the step types with the
> following command,
>
> "SELECT UUT_RESULT.* FROM UUT_RESULT WHERE ([UUT_SERIAL_NUMBER] =
> 12345) ORDER BY [EXECUTION_TIME] ASC"
>
> and this return the expected results and the record count parameter
> was as expected. I tried this on TS 1.0.2 and TS 2.0 with MS Access
> 2000 and MS SQL Server 7.0. I do not have MS SQL Server 2000 at this
> time.
>
> It would be surprised if the step types are messing something up.
I've been doing some experimenting over the past couple of days. Simple,
one-table queries seem to handle the ORDER BY clause fine. Th
ings seem to
get messed up when I try multi-table queries with ORDER BY clause with the
TestStand database steps. I get no errors but the returned record counts
are always 0 with the ORDER BY and positive without the ORDER BY. The exact
same queries work fine in Visual Basic/ADO and the SQL Server Query
Analyzer.
> Questions:
> 1. Have you verified whether the data is actually returned even though
> the record count is zero?
Hmmm... yes data IS getting returned (at least on the two instances I just
checked), but the record count is always zero. I was not proceeding with
processing if the record count was 0.
Still... I don't know how to loop through the recordset without knowing how
many records there are an not eventually generate an error by passing EOF.
Is there another way using the TestStand database steps to determine a) the
number of records in the recordset or b) when I'm at EOF?
> 2. Are you using any advanced options on the Opend SQL Statement step
> type, specifically
the cursor type set to forward only? Forward only
> cursors do not allow for record counts.
Everything on the Advanced tab of the Open SQL Statement step is set to "Use
Default".
Bob. -
The column name "PERNR" has two meanings. ABAP/4 Open SQL statement.
Hi All,
Could anyone advise on what are the error I encountered at below code.
I get the error in " The column name "PERNR" has two meanings. ABAP/4 Open SQL statement." . This errors happen to all the key fields I have selected in below code (eg: pernr, subty, objps, sprps, begda, endda, seqnr).
The field zeih also encountered error in "Unknown column name "ZEIH". not determined until runtime, you cannot specify a field list."
SELECT pernr
subty
objps
sprps
begda
endda
seqnr
zlsch
ZEIH
SELECT * INTO CORRESPONDING FIELDS
OF TABLE i_pa0009
FROM pa0001 INNER JOIN pa0009
ON pa0001pernr = pa0009pernr
WHERE bukrs IN s_code AND
banks NE space.Hi,
In this query
SELECT pernr
subty
objps
sprps
begda
endda
seqnr
zlsch
ZEIH
if you have used joins and if both the database pa0001, pa0009 has the above mentioned fields you will get the error message as the control gets confused as to which table of the field you are referring to..., instead use them in this way
SELECT pa0001~pernr
for each field mention to which table it belongs and ~ before the field name in the above fashion, this will remove the error
Regards,
Siddarth -
ORA-01460: unimplemented or unreasonable error & OPEN-FOR statement ...
Hi,
I have a procedure that opens a cursor which returns a result set based on a dynamic SELECT statement. The IN clause
in most cases needs to handle more than 1000 expressions. So to avoid the ORA-01785 error, I use a function to
convert the comma separated list of ids (which are unknown) into a collection which can then be used in the sub query
to process each expression or id. I assumed that the maximum string length I could use for these list of ids was
32767, i.e. VARCHAR2. But f I attempt to open the cursor with a list of ids where the string length is greater than 4000 bytes , the cursor is invalid
and it seems to throw the following Oracle error:
ORA-01460: unimplemented or unreasonable conversion ...
Note that anything less than 4000 bytes is fine. I have attached some of the code below and would appreciate if anyone
could tell me what im doing wrong! For example, can a varchar2 variable greater than 4000 bytes not be used when
executing dynamic SQL in the context of the OPEN-FOR statement?
-- Create type to hold collection of identifiers.
CREATE OR REPLACE TYPE IDList IS TABLE OF NUMBER;
-- Function which converts a string of comma separated list of identifiers
-- into a collection.
CREATE OR REPLACE FUNCTION fnConvertIDListToCollection(
varList IN VARCHAR2,
varDelimiter IN VARCHAR2 DEFAULT ',')
RETURN IDList
IS
varString long := varList || varDelimiter;
varPos pls_integer;
varData IDList := IDList();
BEGIN
LOOP
varPos := instr(varString, varDelimiter);
EXIT WHEN (nvl(varPos, 0) = 0);
varData.extend;
varData(varData.count) := trim(substr(varString, 1, varPos - 1));
varString := substr(varString, varPos + 1);
END LOOP;
RETURN (varData);
END;
CREATE OR REPLACE PROCEDURE MyTestProc
myCursor OUT SYS_REFCURSOR
AS
varListOfIds VARCHAR2(32767);
BEGIN
-- Hard coding this for now but this will be an incoming parameter containing a list
-- of unknown ids, separated with commas.
varListOfIds := '1,2 .. , 5000';
OPEN myCursor FOR
'SELECT DISTINCT val1, val2, val3
FROM TABLEA
WHERE val1 IN (select * from table(cast(fnConvertIDListToCollection(:ListOfIds) as IDList)))' USING varListOfIds;
END;
/APC,
Many thanks for the suggestion and yes I could possibly implement an alternative solution, certainly for some cases but I need to investigate further for others. I'm migrating some SQL Server logic over to Oracle and that was simply the approach taken on that platform.
Could I trouble you with one further question as a newbie to all of this. I hinted in my last response that I was somewhat confused over the limits with the use of varchar2 variables in PL/SQL. If I were building up a piece of dynamic SQL (e.g. SELECT statement including a WHERE clause) using an incoming VARCHAR2 parameter for the WHERE clause, can this parameter contain more than 4000 bytes if necessary. I assumed it could be as big as 32767 bytes but an earlier response suggested a maximum of 4000 bytes. Really sorry for probably a fairly basic Oracle question but it would be very appreciated if you could explain this to me.
Again, many thanks. -
How open cursor statement works
hi,
OPEN CURSOR [WITH HOLD] dbcur FOR
SELECT result
FROM source
[[FOR ALL ENTRIES IN itab] WHERE sql_cond]
[GROUP BY group] [HAVING group_cond]
[ORDER BY sort_key].
i want to know what does open cursor statement do, how it works, what does dbcur contain?Hi,
dbcur is cursor name gn by u....
Its like select statement....u hav used for all entries right....so if der are 3 records in ur int table and corresponding 3 records ll be fetched in select-endselect query right.....
here in open cursor statement u don hav INTO(destination) right
so after opening cursor......
FETCH NEXT CURSOR dbcur into wa1.
FETCH NEXT CURSOR dbcur into wa2.
FETCH NEXT CURSOR dbcur into wa3.
wa1,wa2,wa3 ll have the 3 records....
close cursor.....................
Cheers,
jose. -
ABAP/4 Open SQL statement with WHERE ... LIKE and pattern too long
Dear All,
I am getting an error "ABAP/4 Open SQL statement with WHERE ... LIKE and pattern too long" while executing the following statement:
CLEAR LS_RANGE.
LS_RANGE-SIGN = 'I'
+LS_RANGE-OPTION = 'CP' +
LS_RANGE-LOW = 'S_ADMI_FCD'
LS_RANGE-HIGH = 'S_ADMI_FCD'
COLLECT LS_RANGE INTO LT_RANGE.
SELECT *
FROM UST12
INTO CORRESPONDING FIELDS OF TABLE LT_OBJECT_VALUES
WHERE FIELD IN LT_RANGE
AND AKTPS = 'A'.
For options like BT(Between), EQ(Equal) in range table, this above query is executing without dump. But for option CP, it simply dumps & in dump what i found is, it is concatenating the value in low & high.
Does anyone have any idea regarding open sql using range tables.
Thanks,
BhupinderHi,
I commented as follows:
If LS_RANGE-HIGH is empty, you can use EQ, NE, GT, LE, LT,CP, and NP. These operators are the same as those that are used for logical expressions. Yet operators CP and NP do not have the full functional scope they have in normal logical expressions. They are only allowed if wildcards ( '*' or '+' ) are used in the input fields. If wildcards are entered on the selection screen, the system automatically uses the operator CP.
If LS_RANGE-HIGH is filled, you can use BT (BeTween) and NB (Not Between). These operators correspond to BETWEEN and NOT BETWEEN that you use when you check if a field belongs to a range. You cannot use wildcard characters.
You can try:
CLEAR LS_RANGE.
LS_RANGE-SIGN = 'I'.
+LS_RANGE-OPTION = 'CP' +
LS_RANGE-LOW = 'S_ADMI_FCD'.
LS_RANGE-HIGH = 'S_ADMI_FCD'.
FIND '*' IN LS_RANGE.
IF sy-subrc = 0.
LS_RANGE-OPTION = 'CP'.
ELSE.
LS_RANGE-OPTION = 'EQ'.
ENDIF.
COLLECT LS_RANGE INTO LT_RANGE.
SELECT *
FROM UST12
INTO CORRESPONDING FIELDS OF TABLE LT_OBJECT_VALUES
WHERE FIELD IN LT_RANGE
AND AKTPS = 'A'.
If you use wildcards the LS_RANGE length should not exceed 10 characters.
Hope this information is help to you.
Regards,
José -
Transaction or standard program for testing Open SQL statements
Hi experts,
Is there a standard program or transaction that can be used to test Open SQL statements?, I was thinking in something similar to a SQL client like sqlcli, but for Open SQL and within SAP GUI.
I know i can write a test ABAP program for this matter but I rather a standard testing facily in this case
Thank you for any help
regardsHi Ozcan
I tried DB02 -> Diagnosis -> SQL Command editor , but I couldn't made it work. It is for Open SQL or for Native SQL?
I tried the following simple Open SQL statements inside the SQL Code tab there were erros
SELECT *
FROM /BI0/PCOMP_CODE
error was: Incorrect syntax near '/'.
SELECT * FROM DD03L
error was: Invalid object name 'DD03L'.
Where is the mistake?
regards -
Error with OPEN DATASET Statement
Hi All,
I have a an executable program which downloads data into applcation server using OPEN DATASET statement.
Following is my code:
OPEN DATASET w_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0
MESSAGE e111 WITH text-003.
ENDIF.
Text 003 is 'Error Opening File'.
sy-subrc becomes non-zero if file cannot be opened for writing.
Daily I am running this program in a background job. I am getting this error on and off. Some times I am able to create the file in application server and sometimes this error comes up by cancelling the job. The message shown for the cancelled job along with text-003 is 'Job cancelled after system exception ERROR_MESSAGE'. This has no dump analysis.
Even When I run this program online I am facing the same issue.
Some users never faced this issue while others have this problem. I think it is not an authorization problem as I am able to create flat file in application server most of the times.
Can you please suggest what could have went wrong?
And kindly propse me a solution.
Thanks & Regards,
Paddu.Hi Paddu,
I am not sure exactly but i would go as far as saying that the reason you may be having that error is because your server has a limited amount of space and that your program is not working due to that limitation.
Is that file that you have created being picked up by another application. If so then i would advise you to check the limitation of the server size.
Also, is your file name different all the time? if u r trying to write an already existing file name it will give u an error.
Edited by: Kevin Ck on Mar 9, 2009 10:19 AM -
Open dataset statement in different SAP versions
Hi ,
I have to write a program which is for extracting data from application server. I have to run this program on different sap versions like, 4.6b, 4.6c, 4.7, 5.0 . I am using 'OPEN DATASET' statement in my program. But the problem is, in versions below 4.6c, this statement is written as "OPEN DATASET filename FOR READING IN TEXT MODE".
And in versions above 4.7 it is written as "OPEN DATASET filename FOR READING IN TEXT MODE DEFAULT ENCODING".
So when this statement will be executed in versions below 4.6c, it will give syntax errors.
Can you let me know how to solve this problem.
Thanks.Hi,
differ btw. syst-SAPRL
-> if you get syntax-error create a subroutine-pool
with abap command generate subroutine...
A. -
In OPEN DATASET statement to open a file
In OPEN DATASET statement
To open a file, the user under which the R/3 System is running must have the requisite authorizations at operating system level.
How to do this ? what knowledge apart from ABAP do I need ?
what is its requirement in prograqmming domain?Hi,
You can consult Basis people to get this authorization for OS folders for your login ID.
From programming point of view, you need to put OPEN DATASET keyword inside try...catch block to avoid the short dump due to authorization issue as below.
try.
open dataset <....>
catch CX_SY_FILE_AUTHORITY into wa_error.
w_text = wa_error->IF_MESSAGE~GET_TEXT.
write:/ w_text.
endtry.
hope that helps -
Question re ENCODING cp option of OPEN DATASET statement
I'm working on a 6.0 system with 4.6 data that I've downloaded from the 4.6 system and uploaded to the 6.0 system.
The 4.6 data has "umlauts" in it (like when "o's" have two dots above them in Scandinavian names), and when my READ DATASET executes on the 6.0 server, my try block is catching a CX_SY_CONVERSION_CODEPAGE error.
I'm assuming that to solve this, I will need to specify the codepage of the 4.6 server in the ENCODING codepage option of the OPEN DATASET statement that's exceuting on the 6.0 server.
Will this solve the problem? If not, what do I try next ?
Also, how can I determine the system codpage of my current ABAP "text environment"? I know all the possibilities are in table TCP0P, but how do I know which one is "active" ???
Thanks guys.Hi,
Refer this OPEN DATASET in ECC6.0 solves your problem and also check the abap documentation for system codepage and text environment.
For unicode systems,system code page is UTF-16.
Thanks.
Ramya. -
I have XI and can open old PDF in my computer but I can not open bank statements or concert tickets ,any ideas ?
Details, please!
-
Sourcecode Plugin - no open "IF" Statement
Dear all,
maybe I was misled by the impression that the coding of an enhancement is merged as soon as a load is generated and that the syntax-check consider original code as well as active enhancement as a whole.
If this would be the case, following example should work but since the compiler states that no open if statement exists, I have some doubts if I did not miss something essential here. Could anybody help?
Here goes the coding.
REPORT /sew/cotest1 .
TYPE-POOLS: abap.
DATA g_test TYPE abap_bool.
IF g_test = abap_true.
WRITE: 'TEST'.
ENHANCEMENT-POINT /SEW/COTEST1 SPOTS /SEW/COTEST1.
*$*$-Start: /SEW/COTEST1-------------------------------------------------$*$*
ENHANCEMENT 1 /SEW/COTEST1. "active version
else.
write: 'test'.
ENDENHANCEMENT.
*$*$-End: /SEW/COTEST1-------------------------------------------------$*$*
ENDIF.
The idea is that the normal if block is "enhanced" with an else block. The write statements do not make sense but this is not the point here. As soon as I try to activate the implementation of the inhancement I get the error message:
No open "IF" statement
The enhancment is only active because I said "Activate anyway"
Any ideas?
Thank you in advance.
Christian
Edited by: Rob Burbank on Mar 17, 2010 11:28 AMObviously this is the reason why.
Thank you for pointing that out.
Christian
Maybe you are looking for
-
How to get video off my computers hard drive?
After trashing preferences I forgot to change the scratch disks, to my external hard drive, and all the video was put on my computers hard drive. Can someone tell me where to find the video on my hard drive, and then how to delete it off, it is about
-
Hey everyone, I've been searching for quite awhile for an answer to this issue, and I haven't found it - so I figured I would post a question about it. To give some details, whenever I soft restart my Macbook Pro (By resetting it through the "restart
-
TS3297 Can get on iTunes but carnt download an app cause there was a problem with my last purchase
Could get apps up until last nite now it says carnt purchase any cause of an app I av all ready purchased
-
Urgent !!! FRM-90926--- Webutil
Hi, i am trying to use webutil in Forms. I am using Forms 9iDS. when i am running the forms i am getting the error FRM-90926 ' Duplicate parameter on Command LIne' my java console is giving the following message Loading http://localhost:8888/forms90/
-
Uploading photos from Aperture to Flickr
I created an album using the "Share Flickr" option in Aperture, which is now showing that it's syncing with Flickr. However, I can't locate the album in my Flickr account. This is the first time I've tried using this sharing option. Probably missing