No Payload in sxmb_moni call adapter
I did soap to soap asynchronous scenario....
my requirement is to send one systems soap request as it is to other systems soap response...
i.e., sending soap message asynchronously...
its often saying that queue is stopped... i am deleting that queue and manually checking for message tracing.....
upto technical routing my payload is there, there is no payload in call adapter...
i checked in adapter monitoring, message monitoring and sxi_cache.. there is no error atall...
Please guide me in resolving this problem...
Regrads,
Pushparaju.B
Hi,
<i>my requirement is to send one systems soap request as it is to other systems soap response...</i>
Your reqirement is not very clear. Could you please elaborate?
Is it that you want to send a soap request, and donot expect any response back?
Have you called an mapping in your interface determination?
If so, maybe the mapping is not successful and hence you are not able to see the message after technical routing.
I suggest that you check the mapping in the repository, with the payload that you are using as the request.
Regards,
Smitha.
Similar Messages
-
No Payload in the soap receiver call adapter ?
Hi Guys,
configured Proxy-SOAP Asynchronus process and in the sxmb_moni, i am unable to see the payload under call adapter in sxmb_moni, but i am able to see the payload under RWB in MDT. The message is checked successful in monitor.
I am not understanding why i am unable to see the payload under call adapter in sxmb_moni. I am not getting the data into my receiver system.
Do i need to mention the QOS as EO in the soap url in the soap receiver adapter configuration ?
any help would be really appreciated
Thanks,
sriniHi,
You can only see the Payload(both with and without transformation) in MONI. message that is handling by adapter can only seen in Adapter Framework using RWB-Message Monitoring or using Communication Channel Monitoring.
Regards,
Farooq.
<b>
Rewards points if you find it usefull.</b> -
Error in SXMB_MONI in SOAP Header -- Call Adapter
Hi ALL,
Got a problem with monitoring activity.
In SXMB_MONI, iam getting errors with Call Adapter section in SOAP HEADER section of the message.
The Error part shows the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Problem inserting 4657f861-f853-60e8-e100-00000a80314d(INBOUND) into the database: java.sql.SQLException: ORA-25153: Temporary Tablespace is Empty</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody give me a clear picture of the exact error and what could be the diagnosis for this particular problem.
cheers,
SantoshHi Santhosh
1.Check your authorization settings in XI and R/3. Whether the user has sufficient rights to execute the Function Module etc. This is the most common reason for this error.
2.If the XI system was brought online even before the R/3 system then re-activate the communication channels from the Integration directory.
Cheers..
Vasu
<u><i><b>** Reward Points if found useful **</b></i></u> -
Two "Call Adapter" step in SXMB_MONI
Hello Experts,
I have developed Sync interface WebService - PI - BAPI.
However when message is failing due to error in mapping at response side, there are 2 "Call Adapter" steps in sxmb_moni got that message.
First Call Adapter step is not in error status, however 2nd Call Adapter is in Error status (System Error- Restart not possible).
Could you please explain me why there are 2 "Call Adapter" steps? Actually there has to be only one step.
Best Regards,
ManishaFirst Call Adapter step, there is no error
but in 2nd call adapter error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Z_BAPI_VL10_DLVY_CREATE_resp_2_~</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns1:Order/OrderD</SAP:P3>
<SAP:P4>etail/ListOfItemDetail/ItemDetail. Values missing~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_Z_BAPI_VL10_DLVY_CREATE_resp_2_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns1:Order/OrderDetail/ListOfItemDetail/ItemDetail. Values missing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
both call adapter steps are under "Central client" step. why 2 call adapter in one? -
500 Connection timed out when in SXMB_MONI in "Call Adapter"
Hi,
We are using SOAP as a receiver adpter. It is working fine all the time but some times we are getting "500 Connection timed out" error in SXMB_MONI in the "Call Adapter" then it retries again and it works fine but I want to know why we are getting this 500 connection time out error and in another try it works.. and what we need to do to correct it.
Here is the error message from SXMB_MONI. Any help is appreciated!
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY><table width=800> <tr><td width=50 nowrap> </td><td> <H2>500 Connection timed out</H2><br><hr> <table border="0"> <tr><td>Error:</td><td>-5</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Thu Oct 4 03:26:15 2007 </td></tr> <tr><td>Module:</td><td>icxxthr_mt.c</td></tr> <tr><td>Line:</td><td>2698</td></tr>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description Timeout Error while sending by HTTP (error code: 500, error text: Timeout)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks!
MPcan you please look in to this blog by Michal.
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts -
How to hide a payload in sxmb_moni and RWB and Adapter engine.
Hi
I need to hide the pay load in sxmb_moni, RWB, Adapter engine. Because payload has some sensite information.
I need to hide the pay load for perticuler interface Name (http://filetoidoc.com) only. not all payloads.
Please help us this.
advanced thanks
SatiOfcourse you can:)
below are the fields mentioned in blogs
We can also tell exactly which interface/service/namespace can be used:
SXMBPARTY= Communication Party
SXMBPRTAG= Issuing Agency
SXMBPRTTYP= Identification Scheme
SXMBSERV= Service
SXMBIFNS = Interface Namespace
In your case you will use the last one SXMBIFNS
Thanx
Aamir -
Response payload in SXMB_MONI is missing
Dear All,
I have a query related to Response payload in SXMB_MONI.
I triggered an IDOC and XI has sucessfully generated files in my Outbound folder .
<b>When I see sxmb_moni , it is showing message successfully processed message . When I click on successful processed message it is not showing me the Response payload-MainDocument(application/xml) in SXMB_MONI.</b>
PLease help me to find out the solution immediately.
Thanks in advance.
Regards
PrabhatHi,
>>>1) I am not able to see "Payload" under Response in SXMB_MONI in Production server SP15.
can you see the payload before CALL adapter service?
>>>>2) In runtime workbench (Production server sp15) when I click on "Message Monitoring" it is showing error 404 not found.
go to TCODE - SICF and test this service
/sap/bc/gui/sap/its/webgui
navigate from it to the TCODE - SXI_monitor
that's how the message payload is displayed in RWB
BTW
>>>My support pack in development server was sp14 and in production it is SP15.
I just hope your test XI server was SP15
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a> -
File-IDoc scnario : Error in call adapter
Hi Experts,
I have developed File to IDoc scenario. And getting the following error in "Call Adapter" pipeline step. I have mapped the control record values in IDoc like Sender Partner, no, port and same for receiver.
Have created:
In XI: RFC destination to connect to ECC (sm59)
Port for the above RFC sestination (idx1)
In ECC: New logical system for source file system (BD54)
Partner Profile for Source (we20)
Also in Receiver_IDoc_CC, checked options for 1. Apply control record values from payload 2. Take Sender and Receiver from Payload
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPEAQ_100, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPEAQ_100, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please tell me if i am doing any mistake.
Br,
NilzHi,
Adding to Björn
Check the Port ( Tcode - idx1 ) Port SAPEAQ_100 & Select the Business System where you declared IDOC adapter -go to - Service and check whether you have mentioned the right Logic System,System ID & Client.
Cheers
Agasthuri Doss -
Hello,
We have RFC --> HTTPS scenario.
The RFC Destination of type G is created in XI and the connection test is working fine.
When I run this scenario, sometimes I get following error:
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapter:ATTRIBUTE_CLIENT:.
Error in sxmb_moni in Call Adapter Step:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 400 reason ICM_HTTP_CONNECTION_FAILED</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
However sometimes it works fine.
Please help to resolve this.
Thanks in advance,
HetalHello Hetal,
Can you please elaborate more on the scenario. if it is a RFC -> PI -> SOAP scenario please check if you are using the correct target URL in your Receiver Comm. Channel. Also check if the backend service could be unstable due to network load.
Thanks.
Kiran -
Hello,
We have RFC --> HTTPS scenario.
The RFC Destination of type G is created in XI and the connection test is working fine.
When I run this scenario, sometimes I get following error:
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapter:ATTRIBUTE_CLIENT:.
Error in sxmb_moni in Call Adapter Step:
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 110 reason</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
However sometimes it works fine.
Please help to resolve this.
Thanks in advance,
Beena.Thanks Swarup.
The HTTPS connection is used from XI to third party. XI is not receiving HTTPS request.
Still do I need to enable HTTPS on web dispatcher?
The runtime workbench has following error:
Received XI System Error. ErrorCode: ATTRIBUTE_CLIENT ErrorText: ErrorStack: HTTP client code 110 reason
Transmitting the message using connection http://<dispatcher host>:<http port>/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapter:ATTRIBUTE_CLIENT:.
Thanks,
Beena. -
XI - Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT
I am using HTTP adapter to post XML PO to vendor's site. We are having this problem with one of our vendor when PO's has more than 15 line items. XI server is getting error-"Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT". Actually PO is posted good for the first time on vendor's site but XI is getting above error message and it keeps posting it again. Is there anyway to stop it otherthan manually stopping the XI message? Is there anyway to increase the wait time of the XI server to get the message.
Thanks in advance.
Mrudula PatelI'm getting the same issue "500 TIMEOUT error" in runtime work bench-->IE--->Test Message. When i manually trigger the file.
The issue is basically from 01-01-2015 02:00 pm to 02-01-2015 01:am , File is picked from source ftp folder and places in archive but xml messages are not reflecting in SXMB_MONI.
Today suddenly after 01:00 am messages are successfully processing.
Please help on this issue. Many Thanks. -
Hi
I am trying to post to the ECC system using XI Adapter. I get this error at the Call Adapter stage
URL http://host:port/sap/xi/engine call was terminated because the corresponding service is not available.
Here the host is the server name of the ECC QAS and port is the ABAP port in SMICM
How do I solve this error?
RegardsShabarish,
I guess I got the problem though I don't know how to solve it !
Well, when I type this link in the IE, http://host:port/sap/xi/engine?type=entry, where host is the ECC QAS and port is the HTTP port maintained in SMICM, I get the same error that I get in the SXMB_MONI of the PIQ.
Service cannot be reached
What has happened?
URL http://host:port/sap/xi/engine call was terminated because the corresponding service is not available.
Note
The termination occurred in system ERQ with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
I think this error has got nothing to do with the service users in PI and it has something to do with the ECC QAS server.
Regards -
Call adapter: Error exception retnr from pipeline processing
Hi!
I am facing with the following error in sxmb_moni by retrieving the message from business system A.
Errror in part Call adapter
System_Error: Error exception retnr from pipeline processing
Can some one help me tp solve this problem?
Thank you very much!
regards
HolgerHi,
Mark RFC destination AI_RUNTIME_JCOSERVER as UNICODE
check this Error exception return from pipeline processing
Re: Queue problem ?
Thanks!
Edited by: Sudhir Tiwari on Dec 2, 2008 1:37 PM
Edited by: Sudhir Tiwari on Dec 2, 2008 1:37 PM -
Editing Payload in SXMB_MONI
Hi All,
Is this possible to edit payload in SXMB_MONI.
I have already the following url which talks about editing payload from RWB - > Message monitoring.
https://www.sdn.sap.com/irj/scn/wiki?path=%3fpath=/display/xi/whole%252bpayload%252bto%252ba%252bxml%252bfield
Actually I am looking into the options of editing payload in SXMB_MONI of ECC.
Thanks in Advance for the help.
Best Regards
AshokHi ,
am trying to edit only asynchronous message, here is the requirement that we have
Our OTC team has escalated a support issue with a call tag
return that could fail as it comes into SAP.
A "call tag" return is the result of a mis-shipment where the customer
either received damaged product or the wrong product. These returns
come in with not only the account but also the invoice number. The
return is referenced to the originating invoice and the credits are
created based on the prices and discounts that are on the invoice. If
the invoice number on the return does not match an invoice for the
account, then the return will fail.
For some reason, the return fails in the ABAP Proxy layer of SAP ECC
with Application errors and does not provide the ability for the
business to repair the data.
Unfortunately, this failure occurs frequently in production today (1-2
a week - as many as 15) and we anticipate that we will continue to see
these failures with SAP. The invoice is being manually keyed at the
returns setup. Sometimes the error is caused by a keying mistake and
sometimes the documentation (call tag, invoice, packing list) is not
legible.
We also know that External Vendor cannot correct and resend the
return. Their process not only creates the return for credit, but
also has to account for all of the inventory that is being sent for
destruction. Their quality steps lock the return down once it has been
sent to client for credit. Their system will not permit the return to
be corrected and resent.
We do, however, need to find a solution for the correction of these
failed returns that allows us to account for the return and create the
proper credit.
Returns (Order To Cash) team require ability to Edit the payload of
Asynchronous ABAP proxy messages in SAP ECC system, which are failed
due to Incorrect data with Message Status as "Application Error -
Manual Restart Possible".
For this the proposed solution is to Edit the Payload via SAP
XI's "Message Editor" in Runtime Work Bench -> Message Monitoring ->
Proxy Runtime of SAP ECC system.
The message editor is configured in SAP XI and ECC system with the
required roles and SAP Correction Notes.
Message Editor is NOT Working for messages with "Application Error -
Manual Restart Possible" status, while it is working as expected for
messages with "System Error - Manual Restart Possible" status.
Below Error Message is seen, while trying to edit the message with
Application Error in SAP ECC,
" Message editor can only be used for executable, asynchronous XI
messages with errors"
This issue in SAP XI's Message Editor needs to be resolved to complete
the testing of proposed solution in Sandbox systems and make a decision
on the solution to be used for this business requirement. -
Dispay RFC sync payload in SXMB_MONI
Hi all,
I hava a synchronous scenario RCF-TO-SOAP (RFC sender is R3 client).
On XI I want that the parameter LOGGING_SYNC is set to 0, but at the same time I want
to see the inbound payload in SXMB_MONI. I want to see it only for this specific scenario.
How to achive this ? (maybe to do some setting or programming on R/3 before making a synch rfc call ?)
Thanx, JanosThanx for the answers, but I wonder if it is possible to set up logging just for one type of messages -
when RFC sync sender is R/3, as it is stated in the link below:
http://help.sap.com/saphelp_nw70/helpdata/EN/d6/49543b1e49bc1fe10000000a114084/content.htm
Set logging in the message header. This means that this message is logged even if logging
is deactivated explicitly in the configuration. The logging information is part of the message
header:
<SAP:Logging>1</SAP:Logging>
Thanx, Janos
Maybe you are looking for
-
Open PDF files with lightning speeds !
To open PDF files very fast do this: Go to Adobe Acrobat installation directory : eg: C:\Program Files\Adobe\Acrobat 7.0\Reader\ Cut everything from the "plug_ins" directory & paste it into the "Optional" one, this will stop all unnecessary plugins f
-
If I want to reset my MacBook, would I have to buy all the updates again?
I want to reset my whole MacBook Pro. 1. If I put my applications to a external hard drive will I be able to use them one I reset them? 2. Will I have to rebuy anything I bought on iTunes/Mac
-
ipad
-
JFreecharts: Show the Value on the charts.
Hi , how can i customize my Charts.ie. setting the values, the marks on the charts, change his color an so all? thx. Nougs
-
No data found exception when calling a new page from existing page
hi i have a screen which has a delivery id and i am calling a new page with a different view object and a application module.I need to pass this delivery id in the main page to the view object query in the second page. i have defined the second page