No syntax error on syntax check, but syntax error on activation

Hi all,
I have a confusing problem.
I want to default some values on item level of purchase order (ME21N). I added a module call in flow logic of screen 1313 of program SAPLMEGUI. The module itself I added to include LMEVIEWSF01. Here I default some fields of structure MEPO1313. This structure is defined in TOP-include using TABLES.
Before modification I debugged the transaction and found out, that structure MEPO1313 is accessible during PBO. Changes in debugger are shown as expected on screen.
Now, syntax check on LMEVIEWSF01 and even on SAPLMEGUI returns no error. But on activation I get syntax error saying MEPO1313 is not know ??
So, structure MEPO1313 is accessible in debugger, no syntax error on syntax-check, but syntax error on activation ?
What is going on ??
Elko

go to SE80 and Check syantax at package level.
you might be checking syantax for other include and problem si somw ehere else, justa thought.

Similar Messages

Photos ap on mac will not email. shows "more" for extensions which has Outlook checked but does me no good

Why will new Photos ap on mac not email? No "email" pulldown -shows "more" for extensions which has Outlook checked but does me no good.

I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
More to follow tomorrow.
Anyone have any ideas?

Edit postDelete postReport this postReply with quote ATP check but the comm

hi , all guys :
when I create the pp-pi order , first i use the batch determination to allocate the component
batch , then i do the ATP check , but the committed quantity always is zero ,the ATP alway does
not support confirm quantity (co09 the confirm quantity always is zero),so when i create the other pp-pi order the stock quantity always cover the reqirements quantity of components
in the mater data , i use the ATP group is 02 (the customizing is standard) i think the ATP scope is irrelative to this issue .
in the order type control parameters , i use the ATP check
for example :
the componet 100-200 have three batchs :
batch: 20100501 quantity 30 kg
batch: 20100502 quantity 40 kg
batch: 20100601 quantity 40 kg
now , the requirment of component 100-200 is 100 kg
the batch determination conditions is self expiration .
so i throght the batch determination and batch split to allocate the bacth and quantity is
batch: 20100501 quantity 30 kg
batch: 20100502 quantity 40 kg
batch: 20100601 quantity 30 kg
after allocating , i run the ATP check ,BUT the COMMITED QUANTITY ALWAYS IS ZERO .
I don't know why !!! ,where can configure the ATP confirm quantities (committed quantities) the in the customizing
can you give help me!!!
thanks!!!
best regards

Davis:
Check in MRP Group settings, Availability Check session, flag activate full confirmation logic. Test activate full confirmation logic.
Regards,
Ricardo

HT1386 I cannot sync my iPod with the Playlists that I want. For example, I have all the songs in my classical Playlist checked but it doesn't appear in my iPod after syncing. Also I don't get an opportunity to review sync options.

I cannot sync my iPod with the Playlists that I want. For example, I have all the songs in my Classical Playlist checked, but after syncing it does not appear on my iPod. Also, there are no opportunities to change syncing options. None are listed in the left column of my iTunes screen.

Hello Jefflo64,
Thank you for the details of the issue you are experiencing with syncing music to your iPod. For issues like this, I recommend resyncing the music to your iPod.
If you are syncing automatically, resync content to the iPod by unchecking "Sync Music" and clicking "Apply," then checking "Sync Music" and clicking "Apply" again.
You can find the syncing steps in the following article:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

HT204291 My apple tv is not airplaying to any of my devices - the airplay icon is completely gone! I've reset apple tv, checked home sharing is on, checked my wifi connection is active but still no luck? any suggestions would be greatly appreciated:)

- the airplay icon is completely gone! I've reset apple tv, checked home sharing is on, checked my wifi connection is active, no firewalls, but still no luck? any suggestions would be greatly appreciated:)

What IOS and OS are you using Elissa. I think from your post it used to work but has dropped off, is that correct or has it never worked? If it did wotk has anything changed? Check your wifi use with sopmething like istumbler to see if it is being used by neighbours etc?

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

Greetings Kwnez
I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
What I'm saying is "Are we on the same Page"

HT5622 error "iMessage Activation Could not sign in. Please check your network connection and try again."

I am trying to log into FaceTime and iMessage and I keep getting the error "iMessage Activation Could not sign in. Please check your network connection and try again." We have used these features in the past. Please help to get the working.

Try the troubleshooting steps listed under the error message you are getting in this article: http://support.apple.com/kb/TS4268.

"Look for Apple TVs" is checked, but Apple TVs a No-Show

My AppleTV refuses to re-unite itself with iTunes. In iTune Prefs the "Look for Apple TVs" is checked, but no Apple TVs show up in the box below. So I can't input the pass-code to get it syncing. It's weird because the network-password info in "Setup" and is correct working, the cables are all connected and secure, and the most current software is installed.
I just thought of something! It was working fine, but then my older DSL modem was damaged and I had a new WIRELESS DSL modem installed. But I DID re-input all the new info (new network name, password, etc.) and everything has been working fine except this new problem with Apple TV. Any ideas?
Tomorrow I will be installing Leopard OS. I wonder what effect this might have.

Please don't start two threads with the same question.

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists.

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists. Can you assist?

drjil,
It is possible that the subscription is not valid or up-to-date.
If you are looking for U.S. Holidays, here are three alternative choices besides Apple - Downloads - iCal Calendars - US Holiday Calendar.
1. Welcome to iCalShare
2. iCal World - Holiday Calendars by Country
3. US Federal Holidays, ICS format, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015.

The "when I open a new link in a new tab, switch to it immediately" check box is not checked but it acts as if I check the check box

The "when I open a new link in a new tab, switch to it immediately" check box is not checked but it acts as if I have checked the check box.
== This happened ==
Every time Firefox opened
== after I install the Persona themes

I was having the same problem and was looking for solutions when I came across this posting. Disabling GoodSearch solved the problem for me. Hopefully GoodSearch will update soon and resolve the issue permanently so I can use it again.

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Creative Cloud Student and Teacher Edition .I use the Macbook.I got the mail that said my order was checked,but I don't get the number.So I still use trial.Hoe can I change my character into member?

Creative Cloud Student and Teacher Edition .I use the Macbook.I got the mail that said my order was checked,but I don't get the number.So I still use trial.Hoe can I change my character into member?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

We have licensed version of Adobe CS6, but when we start it shows error Maximum Activations Exceeded, We are unable to activate Creative Cloud.

We have licensed version of Adobe CS6, but when we start it shows error Maximum Activations Exceeded, We are unable to activate Creative Cloud.@

CS6 perpetual Mac is version 13.0.6 Windows is version 13.0.1.3 Subscription cloud version is 13.1.2. If you have a cloud subscription and a perpetual licence you would not be able to have both version install at the same time on same machine. What does your Creative Cloud desktop application show and if you start CS6 if the flash screen shows or you can get to menu Help>About Photoshop what version i shown 13.0.6 or 13.0.1.3 or 13.1.2?

Not updating, last was 2009, prefernce update boc checked, but grayed out so can't fix it, how to do it?

I want to sync my firefox browsers between computers Current version on my iMac hasn't updated since 2009 ???? When I try to get it to update, the Firefox box in advanced window is checked but greyed out so I can't do anything to adjust it. How do I upgrade to most recent firefox version without losing all my passwords, etc. why has the box been checked but I'm locked out of it,

Echoing Kurt, since you're a newcomer to the Mac, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

No syntax error on syntax check, but syntax error on activation

Similar Messages

Maybe you are looking for