Nokia 6103 - Exiting from Text Editor
I have just got a Nokia 6103 and am very happy with it (much better interface than my old Motorola), but I have a problem with Text messages.
I create a text message and send it OK. I would then expect to be taken back to the main menu or message menu, but this phone takes me BACK into the Text editor, editing the message I've just sent. I then have to do Options => Exit Editor to get out. THEN it saves my message to my 'saved messages' folder, but of course I don't want it there as there is already a copy in my 'Sent Items'.
Can anyone tell me how I configure my phone to automatically exit the Text editor after sending a text message ?
You cannot set the phone to close the editor after sending a message.
What works is once selected "Send" and it starts sending just press the red phone and it will quit to the main screen and send your message in the background. Shortly afterwards it should tell you Message Sent (or failed), but you can use your phone in the meantime.
Similar Messages
-
Problem in reading the modified text from text editor
Hi all,
Im using text editor for saving the long text entered in the text editor as standard text in So10 tcode.
Here im facing an issue in reading the text from text editor. That is, when the text is entered by the user for first time, then the below method reads the text successfully. But when i do some changes in the existing text present in the text editor and try to read, then the modified text is not returned by the below method.
I use the "CALL METHOD g_editor_ftext1->get_text_as_stream" to read the text. Given below is my code.
CALL METHOD g_editor_ftext1->get_text_as_stream
IMPORTING
text = ig_text_table
is_modified = g_xthead_updkz
EXCEPTIONS
error_dp = 1
error_cntl_call_method = 2
OTHERS = 3.
The return value of "is_modified" is always returned as 0.
Could anyone pls help how to read the modified text using the above method?Check if this works and if it works then there should be some mistake in your coding
REPORT abc.
PARAMETERS:pa1 TYPE bwart.
DATA: container TYPE REF TO cl_gui_docking_container,
editor TYPE REF TO cl_gui_textedit,
report TYPE syrepid,
mod TYPE i,
modon TYPE i.
DATA:tlines TYPE TABLE OF tdline,
wa_tlines TYPE tdline.
AT SELECTION-SCREEN OUTPUT.
report = sy-repid.
IF container IS INITIAL.
CREATE OBJECT container
EXPORTING repid = report
dynnr = sy-dynnr
side = container->dock_at_left
extension = 1070.
CREATE OBJECT editor
EXPORTING
parent = container.
ENDIF.
wa_tlines = 'This is test before a change'.
APPEND wa_tlines TO tlines.
CALL METHOD editor->set_text_as_r3table
EXPORTING
table = tlines
EXCEPTIONS
OTHERS = 1.
CALL METHOD editor->go_to_line( 1 ).
START-OF-SELECTION.
CLEAR tlines[].
CALL METHOD editor->get_text_as_stream
EXPORTING
only_when_modified = '1'
IMPORTING
text = tlines
is_modified = modon
EXCEPTIONS
error_dp = 1
error_cntl_call_method = 2
OTHERS = 3.
IF modon = 1.
WRITE 'Changed'.
ELSE.
WRITE 'Not changed'.
ENDIF.
WRITE modon. -
Printing really small from text editor
I've got a few MS Word documents that I need to print on a regular basis. Some are printed as is, others are forms that I type a few extra lines into.
To save rebooting into XP, I thought I'd try opening and printing them from text editor. For some reason, documents that filled a full A4 page in Word get printed really small - I have to print them at 190% to fill the page. Any reason for this, and is it normal? Is printing at more than 100% the only fix?
The printer is a Samsung ML-1510 mono laser, using the latest drivers. I had the same "problem" printing from my Mini, running Tiger.Select "Wrap to Page" instead of "Wrap to Window" in the Format menu. You can set that as default in the Preferences.
-
Get the long text into BADI from text editor
hi all,
I implemented BADI ME_PROCESS_PO_CUST, before saving the purchase order i am calling the text editor where i am writng
the long text . but when save the text from the text editor the long text in the editor is not updating to the BADI.
Can anybody help how can i get the long text to the BADI.
Regards,
MadhaviHi
Have you tried with interface 'IF_PURCHASE_ORDER_MM' with these methods in the BADI?
IF_LONGTEXTS_MM~GET_TEXTOBJECT
IF_LONGTEXTS_MM~GET_TYPES
IF_LONGTEXTS_MM~GET_TEXT
IF_LONGTEXTS_MM~SET_TEXT
IF_LONGTEXTS_MM~ADOPT_TEXT
IF_LONGTEXTS_MM~DELETE_TEXT
IF_LONGTEXTS_MM~EDIT_TEXT
Regards
Eduardo -
IW22 notification - to save the text from text editor to database
Hi,
In Iw21/22/23 notification screens are configured to custom screens.. and these screens are having text editors.... when i write some text in editor and try to save the notification.. the text should get saved so that i can see it nxt when i display the notification....
Please suggest any ideas...
I thought of saving in table in PAI... but it doesnt come to the event..... and if i try to use an enhancement while saving.... that enhancement should consider the data with respect to tabs... and save differently
please suggest..
Edited by: Poonam 24 on Oct 9, 2011 7:55 AMFirst you need to retrieve the contents from the text editor (jn PBO) e.g.
* Retrieve text currently inside the textedit control
data:
lt_text type tdline occurs 10.
call method go_d9999_textedit->get_text_as_r3table
importing
table = lt_text
exceptions
error_dp = 1
error_cntl_call_method = 2
error_dp_create = 3
potential_data_loss = 4
others = 5.
and then persist the "lt_text" contents, e.g. you could use functions from the STXD group (e.g. SAVE_TEXT) or your own table that would need to have something like
MANDT "key - client
LINK_KEY "key - whatever you are are linking this text to
SEQ "key - one row of text
TEXTLINE
(the first three columns would be the primary key per row of text).
Jonathan -
Get the long text from Text Editor
Hi,
I am using text editor to enter the long text, after entering the text in the text editor
when press the save button i am getting the long text into the internal table . this is working fine till here.
But when press SAVE button , i want the text into the internal table and the text editor to be closed.
but here i am not able to get the data into internal table as it is again creating text editor .
Can anyboby help me .Hi,
Refresh the table. -
Why can I not print from text editor?
I am new to the mac & was trying to do up a text document. I went to text editor thinking that would work. I did it up all nice & can not print it. I just goes all funny. I know it is not my printer; can print other things fine. Can you please help?
If preview looks fine, that does suggest - though it doesn't prove, I don't think - the printer might be mucking things up. Do you have the latest Epson drivers?
Epson: Mac OS X Lion Support
Others here might have better advice.
charlie -
To get text lines from text editor
Hi to all,
I have a created a layout for Material Purchase Order. In that layout every material have its item text and PO text.I have called a function module READ_TEXT to get that text lines.But in that layout printed only last material item text and PO text for all items.How I can solve this probelm.Please give me any ideas.Hi
try using READ_TEXT_INLINE
check this thread its the same issue
problem in read_text function -
User Exit or BADI for VA02-Text editor Functionality
Hi experts,
Can anyone of you please provide me the User exit or BADI name for the tcode VA02 to call the Function Modules related to TEXT Editor?
**********Issues********
I have an Order eg.110022345...Under that Order,there are many line items...Say if i select one line item and change its Schedule line date,then that line item will get cancel and in turn an corresponding New line item will get ceated.
However,the Content of the TEXT fields is not copied to the line item from the parent line item.
I guess the STD SAP code functions in that way.So i thought of writting an Zcode to apply this functionality by using the Function modules "SAVE_TEXT" and "READ_TEXT_INLINE".
In order to do this i need to know the User exit or BADI which is suitable for my requirment.
Requesting you to help me in this case..
Thanks in advans:)Hi
Try USEREXIT_MOVE_FIELD_TO_VBAP in userexit MV45AFZZ.
I'm not sure but may be you need to use FM 'CREATE_TEXT' instead of 'SAVE_TEXT'.
First try with "SAVE_TEXT" if it won't work then use 'CREATE_TEXT'.
Best Regards,
Nikhil Patil -
How to call a text editor from a module pool program
Hi All,
I want to call the text editor from my modulepool program. Enter my text in it and save it.This text needs to be saved in a Z-program with 2 fields as primary keys. The next time while I call this same record from this z table, I need to fetch the existing text and display it.
The user now can put in additional text and can again save it. This process thus goes on..
If anyone has worked in this type of scenario, then please help me in doing this.
Useful answers will surely be rewarded.
Thanks,
Susanth.Hi Sushanth,
We save the text not as fields in a ztable directly but as a text.Please check the format below since it is based on a working code....
first you need to create a text in s010 transaction...
there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
GW_THEAD-TDID = 'ST'. " Text ID from SO10
GW_THEAD-TDSPRAS = SY-LANGU. "current language
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
*To Read from Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
*To pass to Container
CALL METHOD EDITOR ->SET_TEXT
hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju -
How to get information from a text editor in the SAP standard transactions
Hi SAP gurus I have a requirement in which it is required to gte the information from a text editor(which is not a field) in mm02 (click on) goto Purchase Order Text in this view there is a text editor there is some text in te the text editor i have to get that information in a table can it be done if so please give example and steps
Points will be given to useful informationAh yes, excellent question, and not really a clear cut answer. In my experience, the easiest way to find this information is to simply create the text using the standard transaction, in this case MM02. Then go to transaction SE16, using table STXH, do a query on this table, entering your user name, and today's date as the creation date. The results should show the text that you just created, now you can see the object, id, and the way the name is being used here.
I also understand that in some cases, there is a button next to the editor in the screen which gives you some idea of these values, but this is not implemented everywhere, and I believe that I've only seen this in one place, can't remember where, but the first solution above will always work for you.
Regards,
Rich Heilman -
Pasting from the clipboard using SharePoint 2010 rich text editor
Currently we are using Microsoft SharePoint 2010. In the Rich Text Editor their is a Paste option in which a user can copy from say a Word document and paste it in their content place holder. Right now I recieve an error message when trying to use the paste button " Your browser is not configured to allow access to your computer’s clipboard. Use Control+X for Cut, Control+C for Copy, and Control+V for paste". I cannot use the paste button for whatever reason. I have tried to change my javascript file within FireFox and it still doesnt work. After working with Microsoft on the problem they informed me that it was FireFox causing the problem and suggested I contact you for information or possible fixes.
See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper -
Hello. I am using Breeze text editor on my macbook. To exit the editor I need to use "keypad 8". Is there a way to map this to the keyboard or a series of shortcut keys?
I have found the solution for myself for the above. I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!
-
Hello Experts,
I have an ALV Grid where the last column is displayed as push buttons. When i click on a pushbutton, a text editor is opened up using ABAP OO. Now, I enter the text and SAve it. A standard text is created against the selected row in ALV Grid. Then I come back to the alv grid and click on another button of some different row. Again the text editor opens up with the previous text. I nter the new text and click on save. However, this time the standard text is not created. I have am making the container and text editor free as i click on 'back'. Still the data is not getting refreshed.
Please, let me know where m i going wrong.
Regards,
SonalHi Sonal,
I have faced similar issue with respect to module pool with container on the screen.
Try using the following on back action....
call method wf_init_edit->delete_text. (wf_init_edit -> editor reference - type ref to cl_gui_textedit )
Also we can free the container using
call method wf_init_cont->free. (wf_init_cont -> container reference - type ref to cl_gui_custom_container )
Hope it helps.
Regards,
Byju -
ERROR_CNTL_CREATE while calling BDC from transaction MM02 for Text Editor
Hi Friends,
I am using transaction MM02 when creating Purchase Order Text . Its working fine in foreground, but when I run it in background it is raising exception ERROR_CNTL_CREATE when calling the Text Editor.
I know in background SAPGui is not available and thats why it is raising the exception. But is there a way I can avoid it?
Thanks in advance,
Victoria
Here is the dump info:
The termination occurred in the ABAP program
"CL_GUI_TEXTEDIT===============CP"
In "CONSTRUCTOR".
The main program was "SAPMMG01 ".
The termination occurred in line 6 of the source code of the (Include)
program "CL_GUI_TEXTEDIT===============CM002" (when calling the editor 60).
The program "CL_GUI_TEXTEDIT===============CP" was started as a background job.
Error occurred during batch input processing
Here is the source code where the error occurs:
1 *creates and links TextEdit control
2 METHOD constructor .
3 DATA prog_id(80).
4
5 if parent is initial.
>>>>> raise error_cntl_create.
7 endif.
8
9 CLASS cl_gui_cfw DEFINITION LOAD.
10
11 * assign prog_id to get the frontend specific control
12 if not activex is initial.
13 prog_id = 'SAPGUI.TextEditCtrl.1'.
14 elseif not javabean is initial.
15 prog_id = 'com.sap.components.controls.textEdit.SapTextEdit'.
endif.Dear Vicki Reed,
I encounter same raise exception ERROR_CNTL_CREATE in MM02 while maintaining material texts in different languages.
Can you please let me know how you resolved this issue in your case.
Thanks in advance .
Warm Regards,
RajaShekar Gangula.
Maybe you are looking for
-
Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?
-
Java.lang.NullPointerException when using readTemplate with WLST offline
I imported WLST offline as a module in to jython script and tried wlstOffline.readTemplate('../wls.jar') It gives me a java.lang.NullPointerException. Here is the entire stack trace Traceback (innermost last): File "testOffline.py", line 3, in ?
-
I dropped my phone is water. How do I get it to work again?
So I dropped my phone in water and I quickly took it out. And it still works, but the speakers are broken on it. How do I get them to work?
-
Oracle10gR2 - TAF setup in RAC environment (Pls close this thread)
Hi, I wish to setup TAF in my RAC environment. 1. Can I harness TAF advantages without doing any Application changes? 2. How much useful can TAF be if application changes are not done? Thank you. Regards.
-
I am a java developer and having problem writing a simple sql query. Any help is highly appreciated. FILE_TBL CREATE TABLE FILE_TBL FILE_ID VARCHAR2(8 BYTE), PUBLICATION_DATE DATE, LOCATION_CODE VARCHAR2(2 BYTE), Sample Data INSERT INTO FILE_TB