Non-domain user authentication against SSAS on Active/Passive Cluster

Hello,
We have an Active/Passive SQL Server setup (DB1 & DB2 Servers) connected to a cluster for SQL & SSAS. I have a web server not on the same domain that I am trying to authenticate with SSAS. This works OK if I set the website to impersonate
myUser and I add local account myUser as an Admin on SSAS for the active server (DB1). But when this fails over to DB2 then it fails to authenticate. SSAS won't allow us to add myUser as an admin for local accounts on both DB1 & DB2 as it errors
adding the second one. Could anyone advise how such a scenario should be approached?
We have tried creating a domain user too which DB1 & DB2 can of course both share but I don't think the web server can impersonate this with being not part of the domain.
Thanks.

Hi Jcorker,
According to your description, you need to access the SQL Serve Analysis Services database which is configured as cluster for SQL & SSAS from another domain, right?
In SSAS we can use the solution below achieve the requirement.
1.Create new domain account and impersonate the web site with that.
2.Create local user account on the analysis service with same exact username/password as like domain account created in the previous step.
However, you cannot create a local account with the same name on both servers. I have tested it on my local environemnt, we can create the same local account with the same name on both servers. In your scenario, if DB1 and DB2 on different server, you can
create a local account with the same name on both servers. Please post the detail errors, so that we can make further analysis.
Besides, SSAS only allows users of the same domain or trusted domains and it does not allow users from any domain except from these two. You can configure the trust relationship between the domains.
http://technet.microsoft.com/en-us/library/cc961481.aspx
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Similar Messages

Cisco ISE (Authentication failed: 24415 User authentication against Active Directory failed since user's account is locked out)

Hi,
I have a setup ISE 1.1.1. Users are getting authenticate against AD. Everything is working fine except some users report disconnection. I see in the ISE that (Authentication failed: 24415 User authentication against Active Directory failed since user's account is locked out). Users are using Windows 7 OS.
Error is enclosed & here is the port configuration.
Port Configuration.
interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30 interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30
Please help.

The error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts)

Cisco ISE Failure: 24408 User authentication against Active Directory failed since user has entered the wrong password

Hi,
Since we implemented Cisco ISE we receive the following failure on several Notebooks:
Authentication failed : 24408 User authentication against Active Directory failed since user has entered the wrong password
This happens 2 or 3 times per Day. So basically the authentications are working. But when the failure appears, the connection is lost for a short time.
The Clients are using PEAP(EAP-MSCHAPv2) for Authentication. We've got a Cisco Wireless Environment (WLC 5508).
Why is this happening?
Thanks,
Marc

The possible causes of this error message are:
1.] If the end user entered an incorrect username.
2.] The shared sceret between WLC and ISE is mismatched. With this we'll see continous failed authentication.
3.] As long as a PSN not receiving a response from the supplicant within this limit during an EAP conversation, it will throw this error code. In majority of cases it says eap session timed out.
In your cases, the 3rd option seems to be the most closest one.
Jatin Katyal
- Do rate helpful posts -

"Unable to check revocation" error while checking CDP from non-domain user account

Hi!
I use 3-tier PKI infrastructure:
Stand-alone offline Root CA: RootCA;
Stand-alone offline Intermediate subordinate CA: SubCA;
Enterprise CA: EntSubCA.
In certificate we have three CDP point for CRL check:
ldap:///, http:// and file://
I have Windows 2008 R2 server joined to domain.
I use command certutil –verify –urlfetch <filename.cer> >check.txt for revocation checking of certificate.
When I use domain user account for revocation checking, all OK.
I have access to any CDP and all fine.
But when i use local server user account, I haven't access to ldap:/// and process failed although all other links is OK.
My question is "why check fail with non-domain user accout while other CDP point succesfully verifed"?
Here is the logfile from local user:
Issuer:
CN=EntSubCA
DC=DED
DC=ROOT
Subject:
CN=servername.domain_name
Cert Serial Number: 5a896145000300006ee2
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
ChainContext.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
ChainContext.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
SimpleChain.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=1000040
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
NotBefore: 05.02.2015 20:03
NotAfter: 05.02.2016 20:03
Subject: CN=servername.domain_name
Serial: 5a896145000300006ee2
SubjectAltName: DNS Name=servername.domain_name
Template: Machine
70 e4 6b 16 05 a1 62 e3 6d 24 96 ff 44 74 ee a2 3e ce df 18
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
Element.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crt
---------------- Certificate CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
Verified "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Base CRL CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
OK "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
OK "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 018d:
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
33 af 4d be 0e 35 45 94 bc 8b 3f d9 c1 60 e7 0c c4 83 17 b6
Application[0] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[1] = 1.3.6.1.5.5.7.3.1 Server Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=SubCA
NotBefore: 13.11.2014 19:12
NotAfter: 13.11.2017 19:22
Subject: CN=EntSubCA, DC=DED, DC=ROOT
Serial: 6109015b000100000008
Template: SubCA
9b 04 17 9f c5 fe 52 ca a5 58 49 6c c6 18 fa db 13 b3 92 9e
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: The network path was not found. 0x80070035 (WIN32: 53)
file://\\sub_ca\CertEnroll\sub_ca_SubCA(1).crt
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\SubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/SubCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (32)" Time: 0
[0.0] file://\\ca\crl\SubCA.crl
Verified "Base CRL (32)" Time: 4
[1.0] http://webserver/crl/SubCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 32:
Issuer: CN=SubCA
8d a9 9d 51 65 a3 8e 77 02 22 40 57 62 70 e8 f6 c5 2e 60 1e
CertContext[0][2]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 28.05.2008 12:09
NotAfter: 28.05.2058 12:19
Subject: CN=SubCA
Serial: 616bd19f000100000004
Template: SubCA
06 d2 47 e7 dc 8f a7 97 a2 b8 c3 92 03 19 24 0c 47 45 22 14
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 4
[0.0] http://webserver/crl/RootCA.crl
Verified "Base CRL (1c)" Time: 0
[1.0] file://\\ca\crl\RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
CertContext[0][3]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 27.05.2008 16:10
NotAfter: 27.05.2110 16:20
Subject: CN=RootCA
Serial: 258de6fbd3bbab92460530e9e9f10536
5d e4 56 38 13 0a 52 aa 66 51 25 61 19 33 c9 d7 a2 c7 dd 38
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 0
[0.0] file://\\ca\crl\RootCA.crl
Verified "Base CRL (1c)" Time: 4
[1.0] http://webserver/crl/RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
Issuance[0] = 1.2.700.113556.1.4.7000.233.28688.7.167403.1102261.1593578.2302197.1
Exclude leaf cert:
5b 8d 96 39 f8 a3 6f af f3 89 bc 8d 78 e2 da 53 21 b8 ff aa
Full chain:
ca 99 30 47 9b ad ab ce 97 cc 70 80 a5 4e 11 b3 1a 83 98 78
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.5.5.7.3.1 Server Authentication
ERROR: Verifying leaf certificate revocation status returned The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613)
CertUtil: The revocation function was unable to check revocation because the revocation server was offline.
CertUtil: -verify command completed successfully.

What you have discovered is the reason to *not* use LDAP URLs for CDP and AIA extensions in your PKI. To access those URLs, the account must access to the URLs. In your output, it is quite clear that the local account does not have necessary permissions
(you also use FILE URLs for publication, which again is not recommended).
The best practice is to use a single URL for the CDP extension. It should be an HTTP URL that is hosted on a highly available (internally and externally accessible) Web cluster.
For the AIA extension, it should contain two URLs: one for the CA certificate - again to an internally and externally accessible, highly available Web cluster and one for the OCSP service - also
an internally and externally accessible, highly available Web cluster.
the other issue is that the root CA is *not* trusted when run by a non-domain account. How are you adding the trusted root CA. It is recommended to do this by running
certutil -dspublish -f RootCA.crt.
This will ensure that the computer account trusts the root CA. In your output, the root CA certificate is not trusted.
Brian

Non Domain User Access to Report Server

HI Team,
I am Back with another question. These days i am working on SSRS web services as a part of that i need to provide user access to non domain users to the report manager which is residing in a virtual machine and also when i use the report service web service
URL it is asking for virtual machine's windows credentials and as per my client's requirement i should not be prompted with VM'S windows credentials.
Also, we are providing end users with a login page and this login page is connected to a separate User's database in the VM and how to register these non domain users in the report server database
and also reort manager. please help me out of this issue.
Thank you.

Hi NB515,
In Reporting Services, if we connect to Report Manager out of domain, then we need provide a domain username and password can we access to it. If you want to skip this step, you can configure anonymous access for the report server. However,anonymous access
is not recommended as it may give direct access to your report server or report projects to any one who know the URL of your Reporting Services. But in case you still want to try it, you can refer to the link below to see it:
http://blog.quasarinc.com/ssrs/sql-server-reporting-services-2012-anonymous-access/
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

[b]Managing Active/Passive Cluster.[/b]

Hi,
We are having active passive cluster
environment and we are running webMethods on
it.
The problem we are having is whenever we do
any changes we need to do a failover and then
do the same task on the passive one as well.
Can anybody help how to make this thing
automatic so that we deploy any package/fixes
on webmethods and should get replicated on
the passive one.
Thanks,
Amit.

If you are manipulating data-files, that do not affect the Application (in this case webmethods) then simply use the cluster console, which allows you to perform updates on multiple hosts at the same time.
Alternatively if you are making changes to the application itself then, does the application management software ( I am not that familier with webmethods) not allow you to distribute changes across an application domain, ie. using the application tools and not the underlying cluster framework.

Veritas Active/Passive cluster knowledge

Hi All,
Does anyone have any experience of Veritas Active/Passive cluster skills that they could share with me.
rgds
alan
Message was edited by:
alanm

Veritas active/passive cluster is very easy to use. I am not sure about linux but I guess even for linux there are having gui interface which is very user friendly. Its like cluster will use common storage and one node will be configured as active other as passive in case any failure occurs at node1 automaticly node2 will become active.

Installing Remote Blob Storage (RBS) Provider on Active/Passive cluster

We are implementing RBS for our SharePoint farm and have successfully got it installed and working for all Content Databases.
I've read a dozen or so guides but none of them cover installing on a clustered SQL environment and I need to install the RBS provider on the passive node but cant see any guides that mention it although its stated Clustering is supported.
Can anyone tell the correct way to install it on the passive node?

Hi Dr_Sanchez,
According to
this blog, it is supported to install remote blob storage provider on SQL Server active passive cluster. You could follow the installation steps in that blog. If you get an error like this:
Cannot use file 'c:\Blobstore' for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of
the Sql Server does not have a dependency on it.
Then please replace 'c:\Blobstore' with the volume\directory which resides in the same group in the Cluster Administrator as the SQL Server resources.
Regards,
Michelle Li
If you have any feedback on our support, please click
here.

Active - Passive Cluster

Hey, I have to manage an active passive cluster on SLES10 SP4. Oracle 10.2.0.4
All oracle binaries are on a DRBD Device on mountpoint /oradata.
This mountpoint includes the binaries and all datafiles.
I havent installed these systems. At one stage on node died and got reinstalled by a systemadministrator.
After a switch from the running node to the standby node, the cluster is not starting.
Jan 3 14:36:01 a logger: Cluster Ready Services waiting on dependencies. Diagnostics in /tmp/crsctl.6114.
Jan 3 14:36:14 a logger: Waiting for Oracle CSS service to be available before starting
Jan 3 14:36:14 a logger: ASM instance +ASM. Wait 2.
After issung $ORACLE_HOME/bin/localconfig add the cluster is starting, the asm instance is coming up, and also the database instance is starting.
Shortly after that the db instance dies. Alertlog is showing something like recursive sql error.
Looks like writing to the datafiles is not working.
In asmcmd the diskgroups are showing DISMOUNTED (show MOUNTED before)
so what to do ?
a) Why is it necessary to issue "localconfig add" to make the cluster starting ?
b) What could be a reason for not being able to write to the database ?
c) How would you guys install an active/passive cluster ?
c1) Install OS on both nodes
c2) Install oracle binaries
c2.1) on both nodes in the local files system and do the mapping to the drbd afterwards?
c2.2) only on one node and just switch the mountpoint ?
Chris

Hi,
first of all please clarify, if you have Oracle clusterware installed, or just the local configuration for local ASM.
There is a big difference between the 2, and also using DRBD has nothing to do with Oracle clusterware (and is not supported by Oracle).
a.) Localconfig may be necessary for a local ASM installation in 10.2. Main reason is, that the CSS service configuraton includes the hostname (which changed if you switched nodes). Hence may not be able to start ASM. With localconfig you are fixing this issue.
Very important: It is not a good idea to run this is a cluster configuration, since it will break things (a lot of things).
b.) If the ASM diskgroup got dismouned, then the database cannot write. Hence your problem. Why the diskgroup dismounted, you should find in the ASM alert.log
c.) I would go for RAC One Node. Which has this all preconfigured. So it makes life easier. Search for "RAC One Node" on OTN for more information. At least I would take a manual cluster, and do mirroring by ASM, and not DRBD....
c1.) Yes install Oracle cluster (or Grid infrastucture in 11.2) on both nodes. Like a RAC.
c2) Install database software on both nodes locally.
c2.1) No. No DRDB.
c2.2) Both nodes. Same installation.
Regards
Sebastian

Planning System Center Operation Manager 2012 R2 on SQL 2012 Active/Passive Cluster

Dears,
I'm planning to deploy System Center Operation Manager 2012 R2 on SQL 2012 Active/Passive Cluster which have other sql instances running for other applications. And i'm planning to create a new instance for SCOM, kindly provide me recommendation
whether i can install all sql databases for SCOM on same sql instance or does it require separate instances for opsmanger database , dw database and ACS database?
Thanks in advance..

Hi,
Yes, all SCOM SQL databases can run on the same instance of SQL server.
As well, look at some helpful posts for the topic:
http://technet.microsoft.com/library/dn281933.aspx
http://blogs.technet.com/b/kevinholman/archive/2013/10/18/opsmgr-2012-r2-quickstart-deployment-guide.aspx
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

Drop Database in Active/Passive Cluster

Hi,
database is 10.2.0.4 on RHEL AS 4. Database is using ASM for the storage of physical files. This database is part of Active Passive cluster.
Can you please guide me as how can I drop this database and also remove the entry from cluster.
Thanks

Panicked DBA wrote:
Hi,
database is 10.2.0.4 on RHEL AS 4. Database is using ASM for the storage of physical files. This database is part of Active Passive cluster.
Can you please guide me as how can I drop this database and also remove the entry from cluster.
For dropping the database, using the DBCA is the best approach. After the removal, use the command srvctl to remove the entries from the OCR.
HTH
Aman....

Oracle Active / Passive Cluster Installation

Hi everybody,
I have searched a lot about installation of Active / Passive Cluster installation in Oracle on Linux, neverthless nowehere I found it.
Can anyone help me to install it or send me any documentation about it from start to end.

Hi,
if you are talking to a High Availability feature in OAS 11g then check the following document.
Reference
http://www.oracle.com/technetwork/database/features/availability/maa-edg-frd-129690.pdf
Regards Roberto

3 Node ASA active/passive Cluster possible ?

Hi,
we operate an active/passive cluster with 2 ASA5510 in Routed Mode.
Is it possible to add another node, so that we have one active and two standby nodes in the cluster?
Unfortunately, I have found no documentation on this .... The data sheet say only up to 10 nodes can be mentioned as a VPN load balancing cluster.
best regards
Andreas

For failover you cannot implement more than two ASAs as a cluster. Either for Active/Standby or Active/Active solutions
Tariq Bader
Sent from Cisco Technical Support Android App

User authentication against LDAP - Non-AD

Hi,
We are trying to setup LDAP authentication against an LDAP, Oracle Unified Directory and below are the parameters of ldap.properties file:
ldapAuthentication.defaultRole = ROLE_AUTHENTICATED_PRINCIPAL
ldapAuthentication.enabled = true
ldapAuthentication.tryNextProviderIfNoAuthenticated = true
ldapAuthentication.stopIfCommunicationError = true
ldapAuthentication.url=ldap\://localhost:389/
ldapAuthentication.rootContext=DC=test,DC=com
ldapAuthentication.securityPrincipal=CN=Directory Manager
ldapAuthentication.securityCredential.encrypted=password
ldapAuthentication.keepContextPrefix=false
ldapAuthentication.isAD=false
ldapAuthentication.userAccountSearchKey=CN
ldapAuthentication.firstNameSearchKey=givenName
ldapAuthentication.lastNameSearchKey=sn
Still I am getting while I try to login to OIA as an OUD user:
WARN [UserManagerImpl] RbacxUser with username: 'cn=oiaadmin' not found
Please help

Hi Jcorker,
According to your description, you need to access the SQL Serve Analysis Services database which is configured as cluster for SQL & SSAS from another domain, right?
In SSAS we can use the solution below achieve the requirement.
1.Create new domain account and impersonate the web site with that.
2.Create local user account on the analysis service with same exact username/password as like domain account created in the previous step.
However, you cannot create a local account with the same name on both servers. I have tested it on my local environemnt, we can create the same local account with the same name on both servers. In your scenario, if DB1 and DB2 on different server, you can
create a local account with the same name on both servers. Please post the detail errors, so that we can make further analysis.
Besides, SSAS only allows users of the same domain or trusted domains and it does not allow users from any domain except from these two. You can configure the trust relationship between the domains.
http://technet.microsoft.com/en-us/library/cc961481.aspx
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

"Sharepoint 2013" is giving error that prevents local domain users authentication for "Team Foundation Server"

I am getting 2 errors through the event viewer that prevents TFS 2013 authentication for local domain users, also this error started appearing after having TFS upgraded to [ 12.0.30723.0 (Tfs2013.Update3) ].
1st Error (from administrative events):
The Execute method of job definition Microsoft.SharePoint.Administration.SPUsageImportJobDefinition (ID a51a0244-765d-433b-8502-0bb0540ad1fd) threw an exception. More information is included below.
Access to the path 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS' is denied.
Tried so far:-
- changed the path to another folder from "Diagnostic Logging" in another drive, but still getting the same error.
2nd Error (from application server):
DistributedCOM error
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{000C101C-0000-0000-C000-000000000046}
and APPID
{000C101C-0000-0000-C000-000000000046}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Which I already got fixed using the following steps on a thread I opened before (but still getting the same error).
https://social.technet.microsoft.com/Forums/windows/en-US/3896e35c-b99a-4d30-b662-f92d337c8d6f/windows-servers-components-services-and-regedit-permissions-are-grayed-out-for-my-admin-account?forum=winservergen
Other Fixes I tried
- Found on another topic that it is not sharepoint that is causing the problem, but it is the generated ASP.NET web pages used for testing is causing the memory to fill up due to cashing on RAM, the fix suggested to change IIS cashing from RAM to HD to prevent
loading up using w3wp.exe from processes.
Concern
- by checking other topics for people having the same problem, it was mentioned that this error appeared after the lastest TFS update, is there is a fix for it ?

Hi Kpdn,
Thanks for your post.
All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Non-domain user authentication against SSAS on Active/Passive Cluster

Similar Messages

Maybe you are looking for