Noob Question. Memory added, system now unstable when overclocking

I overclocked my celeron 2.0 to 2.66 a couple weeks ago and it's been stable until yeterday. I added another 256mb of pc2100 ram, and I can't figure out what the issue is.
I tried running overclocked with just the new ram, and it's fine. Same when going back to the old. The system is even stable with both sticks of ram running at a fsb of 100. However, changing to the previously stable 133 fsb with twice the ram causes all sorts of problems.
Winows will load, but I can't run MediaPlayer, which is why I overclocked the system in the first place (for home theater HD stuff).
Memory is one PNY PC2100 256mb ram & one Specktek PC 2100 256MB.
Can anybody throw me a rope here, or point me in the right direction? I've read the guides listed here, but I'm sure I missed something. Thanks for the help.

just to be sure - test your for memory for errors with memtest86 - http://www.memtest86.com/
other then that, try :
- change and test with all three mem.slots combinations
- raise your mem.voltage in bios to 2.6
- check /report your psu spec for 3,3v /5v /12v so that youre not short of power
- clear cmos, set bios and start raising fsb in smaller steps at start - https://forum-en.msi.com/index.php?threadid=31222&sid=

Similar Messages

Noob question about adding a child

I'm exercising scripting and struggling with adding a child to a object when the creation of the child is wrapped in this function
function makeBox():void {
var box:Shape = new Shape;
box.graphics.beginFill(0x66FF00);
box.graphics.lineStyle(5, 0x6600CC);
box.graphics.drawRect(mouseX, mouseY, 50, 50);
addChild(box);
Now I want to add the above shape as a child to this object
var Clip:MovieClip = new MovieClip;
addChild(Clip);
if the first code was not a finction I have no problem to add the child by Clip.addChild(box); but I cant figure out how to use it if it is as a function.

I'm not clear on your true goal, but the thing with having all that code in the function is that because you declare the box inside the function it only has scope within the function. If you want something outside the function to be able to utilize it then you need to declare it outside the function...
var Clip:MovieClip = new MovieClip;
addChild(Clip);
var box:Shape;
makeBox():
Clip.addChild(box);
function makeBox():void {
     box = new Shape();
     box.graphics.beginFill(0x66FF00);
     box.graphics.lineStyle(5, 0x6600CC);
     box.graphics.drawRect(mouseX, mouseY, 50, 50);

Noob question #2: best neo-fisr bios for overclocking?

neo-fisr:
Best bios for high fsb overclocking and high vdimm?
Thanks!

the latest one... if you get the old one, it won't work with the latest CPU and fastest... so what for

Unstable when Wi-Fi connection dropped

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/927170]]</blockquote>
Firefox is unstable when Wi-Fi connection dropped. Very silly. When connection dropped, I want to look other tabs that already loaded but popup message "Firefox is not responding" WTF??
That not nice when firefox is freezing all tabs where I can't look. I had to wait for firefox to working again. I use WiFi Linksys and it always drop connection. Computer OS Win7 64 Bit, Dual Core Intel E6600, 8GB RAM and freespace 4GB of 40GB HDD.

Duplicate Thread LOCK please
* Continue here - https://support.mozilla.org/en-US/questions/927170

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Ve

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Verizon,en,US

Which phone model?

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Am running Firefox 7.0.1 now. Normal memory usage is 157mb but when running Facebook (not running apps nor games), it goes up to 553mb Why?

Am running Firefox 7.0.1 now. Normal memory usage is 157mb but when running Facebook (not running apps nor games), it goes up to 553mb Why?

I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy...

I downloaded my sons iCloud to my phone I deleted his when back and added mine now I'm stuck with his songs how do I get my iTunes back

I downloaded my sons iCloud to my phone I deleted his when back and added mine now I'm stuck with his songs how do I get my iTunes back

Sync your iphone with itunes.
http://support.apple.com/kb/HT1386
Good luck

When i got my i phone they had me answer questions for security and now i went to itunes to buy something and they asked me totally different questions...so now i cant buy things from itunes..can i reset or change the questions

when i got my i phone they had me answer questions for security and now i went to itunes to buy something and they asked me totally different questions...so now i cant buy things from itunes..can i reset or change the questions

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go tomanage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Thanks. Unfortunately, I need to make a master DVD that can then be duplicated in bulk as a single layer disc. This surprises me because I tried burning a different DVD project that has worked in the past which is also 4.5 GB and now I could not burn that either. I also reencoded some material to get the new project down to 4.4 GB but it still would not burn. Any ideas are appreciated.

Hi,sorry for my english.My question is how to change country when i have credit in my account.My account is US and i've 0.5 USD.Now,one frind from Canado bought some credit cards and i can't recharge my account.Tank you for helping me.

Hi,sorry for my english.My question is how to change country when i have credit in my account.My account is US and i've 0.5 USD.Now,one frind from Canado bought some credit cards and i can't recharge my account.Tank you for helping me.

BellaMichelle wrote:
For some reason, I have had misgivings about partioning my internal HD.. not sure why.. sort of feels like I'm creating my own computer sybil ;-) Truthfully, it seems weird to split it.. I don't think I can articulate it really.. but are there complications that can come with doing this?
It's a common way to run multiple OSs, if there's room. I've had two on my internal HD for a couple of years. Plus a small partition for a copy of my Snow Leopard Install disc. Just be sure to leave at least 10% to 15% free on each partition.
Running Lion on a partition of the disk that also contains your backups is not a good idea; if that drive fails, you risk losing both copies of your stuff!
OSX will also run somewhat more slowly, because access to an external is slower. That probably won't be very significant, though.
Also, would the decision be effected by how long I want to maintain the SL section? I am assuming once I sort out what to replace Quicken with, I won't want to keep the SL section. So would it be easy enough to 'clear out the SL data, and open the partition?
Review #3 in Formatting, Partitioning, Verifying, and Repairing Disks.
All things considered, your best bet may be to "clone" your SL partition to the second one, then (once you're sure everything is cool), erase the original (top) SL partition. You can use the Restore tab of Disk Utility for that (#7 in the same link), or a "cloning" app such as CarbonCopyCloner or SuperDuper. Then install Lion on the top partition.
When you're done with SL, just delete it's partition and expand the Lion partition down into the vacated space.

570 GTX TWINFROZR III Memory (noob question)

So i finally received my MSI N570GTX TWINFROZR POWER EDITION/OC card a couple of days ago , sofar quite impressed except for 3DMark11 scores
Anyways, can someone please explain to me this "Memory Clock Speed(MHz)" as in the specifications on the MSI Site it states that it is 4000.
On MSI Afterburner it says "Memory Clock (MHz)" is 2000. This confuses me
Please do note this is a Noob Question.

Quote from: mute_ZA on 14-June-11, 18:21:24
Thanks Svet, that makes sense and gives me quite a relief.
And if you look from some other applications like GPU-Z instead Afterburner, then you should multiply by 4 instead 2

Noob Question Re: Encoding to DVD

This is my first post in the adobe forums , so hello all!
I've been trolling this, and numerous other sites, hoping to understand the basic process of editing -> CD creation.
So here it begins...I am working on "work-out" video tape. The footage was shot using a Canon H10 to removable memory card. All files are .MTS, which don't pose too many challenges for my computer (i7 processor w/ 6MB memory) after the most recent PP update. Editing, adding AE, titles, graphics, or using Sound Booth is relatively painless. I have a total of (4) timelines that comprise the total video (Trailer, Intro, Instructions, and Workout). As I edited the video I'd often render what I had testing formats such as avi, MPEG2, FLV/4, Blu-Ray H.264, etc. I was amazed with the clarity and sharpness as I stayed with in the confines of 1980x1020. So I have no problems there. Once the editing, I first created a blank timeline and pulled into it the other timelines to make on timeline called "Video Complete". I dynamic linked that timeline to Encore and found out that amount of data, in that format, created a very unstable Encore - it screamed and hollered about running out of memory, etc. I watched several tutorials and found that dynamic linking the indvidual timelines gave me a much more stable Encore.
So I had the untranscoded .MTS files in Encore. I created my menu, linking the timelines, etc and built my project using the standard 720x480 (I believe) format. To say the least, I wasn't at all happy with the final product when watched on the television. Very pixalated/jagged around letters, etc.
I don't mind shopping around for the correct answer or putting my time in on research, I'd just like to know if I am on the right playing field and/or headed in the right direction.
So basically my questions are:
1) Is dynamic linking .MTS files to Encore the correct approach as opposed to rendering the .MTS files in PPro to avi or MPEG2 before bringing them into the Encore project? (Based on wanting the best DVD quality possible)
2) Transcoding settings for individual timelines should remain on automatic or should I adjust them and transcode before clicking on build project?
3) Since I was able to see MPGE2 renderings (from PPro) on my computer screen as sharp and clear, should I expect the same quality from a DVD product?
Any information would be helpful - thanks so much.
Joe

Re: Noob Question Re: Encoding to DVD
Hi, great questions:
I think this is a sound approach. MTS is short for MPEG-2 Transport Stream, so it's already MPEG-2 but will of course have to be re-transcoded for DVD to standard definition. If you want to experiment with high definition, you could try stripping the streams out of the MTS using a third party tool such as what you might find at videohelp.com - or not. Less transcoding is always better, but may not be practical. There's probably little advantage to doing this on the DVD side, but it might be worthwhile for Blu-ray? Or not.
First, try using Interpret Footage on the asset (the MTS file itself) - set it to SD Widescreen. You may need to Revert to Original if it's already transcoded. Try building another DVD and check the footage.
For the most part, yes. Of course, they will be standard definition on DVD.
Message was edited by: jbowden
Jbowden,
Thanks for the response. I will check out "Interpret Footage" on the asset of the MTS file and toggle to SD Widescreen. Will do that tonight so I can compare the two for quality.
Joe

Z68A-GD80-G3 - installing radeon 6990 graphics card - noob question

all, apologies for the noob question, but: how exactly do i install a radeon 6990 graphics card?
i have a Enermax ERV1250EGT power supply. the card is in the top blue pcie slot. i have connected the PCI-E 2.0 6+2 (8)Pin connectors (see http://www.enermax.co.uk/revolution85 - connectors tab, sorry no direct link but they are the red ones to be seen in the the bottom left corner of the picture: http://www.hardwareheaven.com/reviewimages/enermax_revolution_1250w/thumbs/10.jpg, i.e. 6 pin + 2 pin = 8 pin).
the card will just not start, i.e. when i boot the pc nothing happens. it works fine without and works fine with my old graphics card (gtx 260).
pics of the asus radeon 6990 here:
http://www.techpowerup.com/reviews/ASUS/Radeon_HD_6990/images/power.jpg
any ideas? is there anything different to this card than with other cards? have installed systems over the past 10 years and never had an issue until now.

Quote from: shell20110309 on 22-November-11, 17:35:16
:lol_anim:Featuring 4GB of high-speed GDDR5 memory, the AMD Radeon™ HD 6990 is the definitive solution for ultra-high resolution gaming across up to six simultaneous displays.1
May I know the purpose of this post?

Noob Question - PreComp Layers and Effects

I have precomposed a layer and am wondering why when I apply an effect inside the precomposed layer, it cannot be seen in the main timeline... for instance, I've created a logo on a billboard and precomposed the layer. I added it to the timeline and all is fine. Now, I tried to apply a 'vector paint' effect to a layer inside the precomp. It looks fine in the precomp, but it disappears in the main timeline. Also, I added trapcode particles inside the precomp. They do not show up in the main timeline either. Any advice would be much appreciated. Thanks to all.

I see them in the precomp but not in the main time.
Date: Mon, 29 Jun 2009 16:11:50 -0600
From: [email protected]
To: [email protected]
Subject: Noob Question - PreComp Layers and Effects
Do you see them when you clic on the "continuosly rasterize" button of your precom. it's the little "*" icon of your precomposition.
>

Noob Question. Memory added, system now unstable when overclocking

Similar Messages

Maybe you are looking for