Not able to create Distribution Model nor Import using IDX2

Hello,
I have created an RFC destination, and i'm able to connect successfully also remote logon is working with error, i have also created Port associated in RFC destination.
But when i try to added a message type in distribution model, i get an error rfc destination not maintained.
Same goes with Import of metadata, i not able to maintain an Port in IDX1, hence not able to import metadata.
If i import an Idoc or create an external defination will it help.
any help would be appreciated.
Regards,
Abhishek

>>i not able to maintain an Port in IDX1
I hope you have created RFC destination in PI system. What error do you see when you try to maintain port?
Regards,
Prateek Raj Srivastava

Similar Messages

  • Not able to Create WebService Model

    Hi All,
    I am trying to create Model using below WSDL file. I am not able to create model even it's not giving any error also.Even model also not appearing in the model section.
    How to check design time logs of the the NWDS studio.
    <u><b>WSDL</b></u>
    <wsdl:definitions xmlns:axis2="http://adcs.demo.com/traceanalysis/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:ns0="http://traceanalysis.dto.adcs.demo.com/xsd" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:ns1="http://adcs.demo.com/traceanalysis/xsd/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://adcs.demo.com/traceanalysis/">
      <wsdl:documentation>This service provides the logistics of a product's movement starting from shop floor, passing through various distributors till it most recent location. It retrieves this information based on grey market code of the product sorted by the scan date in descending order.</wsdl:documentation>
    <wsdl:types>
    <xs:schema xmlns:ax22="http://traceanalysis.dto.adcs.demo.com/xsd" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://traceanalysis.dto.adcs.demo.com/xsd">
      <xs:element name="TraceResultCollection" type="ax22:TraceResultCollection" />
    <xs:complexType name="TraceResultCollection">
    <xs:sequence>
      <xs:element name="logistics" nillable="true" type="ax22:Logistics" />
      <xs:element name="production" nillable="true" type="ax22:Production" />
      </xs:sequence>
      </xs:complexType>
      <xs:element name="Logistics" type="ax22:Logistics" />
    <xs:complexType name="Logistics">
    <xs:sequence>
      <xs:element maxOccurs="unbounded" name="movement" nillable="true" type="ax22:Movement" />
      </xs:sequence>
      </xs:complexType>
      <xs:element name="Movement" type="ax22:Movement" />
    <xs:complexType name="Movement">
    <xs:sequence>
      <xs:element name="customerNo" nillable="true" type="xs:string" />
      <xs:element name="greyMarketCode" nillable="true" type="xs:string" />
      <xs:element name="locationId" type="xs:int" />
      <xs:element name="scanDate" nillable="true" type="xs:string" />
      <xs:element name="shipmentNo" nillable="true" type="xs:string" />
      </xs:sequence>
      </xs:complexType>
      <xs:element name="Production" type="ax22:Production" />
    <xs:complexType name="Production">
    <xs:sequence>
      <xs:element name="batchNo" nillable="true" type="xs:string" />
      <xs:element name="gcasCode" nillable="true" type="xs:string" />
      <xs:element name="greyMarketCode" nillable="true" type="xs:string" />
      <xs:element name="locationId" type="xs:int" />
      <xs:element name="palletCode" nillable="true" type="xs:string" />
      <xs:element name="productionDate" nillable="true" type="xs:string" />
      <xs:element name="shipperCode" nillable="true" type="xs:string" />
      </xs:sequence>
      </xs:complexType>
      </xs:schema>
    <xs:schema xmlns:ns="http://adcs.demo.com/traceanalysis/xsd/" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://adcs.demo.com/traceanalysis/xsd/">
    <xs:element name="getTraceResultsFault">
    <xs:complexType>
    <xs:sequence>
      <xs:element name="getTraceResultsFault" type="xs:anyType" />
      </xs:sequence>
      </xs:complexType>
      </xs:element>
    <xs:element name="getTraceResults">
    <xs:complexType>
    <xs:sequence>
      <xs:element name="productGMC" nillable="true" type="xs:string" />
      </xs:sequence>
      </xs:complexType>
      </xs:element>
    <xs:element name="getTraceResultsResponse">
    <xs:complexType>
    <xs:sequence>
      <xs:element name="return" nillable="true" type="ns0:TraceResultCollection" />
      </xs:sequence>
      </xs:complexType>
      </xs:element>
      </xs:schema>
      </wsdl:types>
    <wsdl:message name="getTraceResultsMessage">
      <wsdl:part name="part1" element="ns1:getTraceResults" />
      </wsdl:message>
    <wsdl:message name="getTraceResultsResponse">
      <wsdl:part name="part1" element="ns1:getTraceResultsResponse" />
      </wsdl:message>
    <wsdl:message name="getTraceResultsFault">
      <wsdl:part name="part1" element="ns1:getTraceResultsFault" />
      </wsdl:message>
    <wsdl:portType name="TraceAnalysisServicePortType">
    <wsdl:operation name="getTraceResults">
      <wsdl:input xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" message="axis2:getTraceResultsMessage" wsaw:Action="urn:getTraceResults" />
      <wsdl:output message="axis2:getTraceResultsResponse" />
      <wsdl:fault message="axis2:getTraceResultsFault" name="getTraceResultsFault" />
      </wsdl:operation>
      </wsdl:portType>
    <wsdl:binding name="TraceAnalysisServiceSOAP11Binding" type="axis2:TraceAnalysisServicePortType">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="getTraceResults">
      <soap:operation soapAction="urn:getTraceResults" style="document" />
    <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
    <wsdl:fault name="getTraceResultsFault">
      <soap:body use="literal" />
      </wsdl:fault>
      </wsdl:operation>
      </wsdl:binding>
    <wsdl:binding name="TraceAnalysisServiceSOAP12Binding" type="axis2:TraceAnalysisServicePortType">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="getTraceResults">
      <soap12:operation soapAction="urn:getTraceResults" style="document" />
    <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
    <wsdl:fault name="getTraceResultsFault">
      <soap12:fault use="literal" name="getTraceResultsFault" />
      </wsdl:fault>
      </wsdl:operation>
      </wsdl:binding>
    <wsdl:binding name="TraceAnalysisServiceHttpBinding" type="axis2:TraceAnalysisServicePortType">
      <http:binding verb="POST" />
    <wsdl:operation name="getTraceResults">
      <http:operation location="getTraceResults" />
    <wsdl:input>
      <mime:content type="text/xml" />
      </wsdl:input>
    <wsdl:output>
      <mime:content type="text/xml" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    <wsdl:service name="TraceAnalysisService">
    <wsdl:port name="TraceAnalysisServiceSOAP11port_http" binding="axis2:TraceAnalysisServiceSOAP11Binding">
      <soap:address location="http://localhost:8080/adcs/services/TraceAnalysisService" />
      </wsdl:port>
    <wsdl:port name="TraceAnalysisServiceSOAP12port_http" binding="axis2:TraceAnalysisServiceSOAP12Binding">
      <soap12:address location="http://localhost:8080/adcs/services/TraceAnalysisService" />
      </wsdl:port>
    <wsdl:port name="TraceAnalysisServiceHttpport1" binding="axis2:TraceAnalysisServiceHttpBinding">
      <http:address location="http://localhost:8080/adcs/rest/TraceAnalysisService" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Thanks in Adv
    -AW

    Check in WS Navigator to see if the service is working fine and post the error message.
    Regards
    Pranav

  • Not able to create meeting request in outlook using desktop connection

    Hi All,
      We installed the desktop connect professional edition and integrated MS outlook and CRM business activity.
    Our goal is to trigger an outlook meeting request (not an outlook appointment).
    We tried to configure this by creating a CRM business activity and syncing with outlook but does not seem to work.
    We are able to create an outlook appointment but not a meeting request.
    What we envision is the business activity needs to trigger a accept/reject/ reschedule meeting request functionality. Only when the user accepts the meeting request it should sync the outlook calendar / SAP calendar.
    Is this functionality available out-of-box or does it need enhancements to the interface ?
    Regards,
    S.Balaji

    Hi All,
      Closing the thread.
      Please refer this document for the Desktop Connection related queries.
      Desktop Connection for SAP CRM

  • Not Able to create Source system for MSS using DB Connect

    hi All,
    i am trying to create a source system for MSS(SQL Server) using DB Connect.
    CAN I KNOW THE ENTIRE PROCEDURE FROM BOTH THE ENDS?
    like how you create the user in SQL Server and
    Do WE NEED ANY ADD-ONS in BW SYSTEM and the Connection Parameters..
    needed immediate HELP...
    ADVANCE THANKS TO ALL

    Hi Lokanth,
    Refer to OSS Note 512739.
    Also check these links:
    http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
    Bye
    Dinesh

  • Not Able to create ADF Table In the Multiple model enviorment

    Hi All
    I am not able to create ADF Table or ADF Read-only Table
    I am having following thinks in my JWS Project
    2, Model Project(Different different name)
    2,faces-config.xml(Different different name)
    1 web Project (View Controller)
    and one Databinding.cpx file
    i am using following version of jdeveloper to develop application
    ADF Business Components     10.1.3.41.57
    BPEL Designer     10.1.3.3.0 (Build 070615.0525)
    Java(TM) Platform     1.5.0_06
    Oracle IDE     10.1.3.41.57
    Struts Modeler Version     10.1.3.41.57
    UML Modelers Version     10.1.3.41.57
    Versioning Support     10.1.3.41.57

    Are you dragging from the data control? what technologies did you use for the data controls?Ans:I am using data controll as ADF BC
    Are the two faces-config.xml files in your web project?
    Ans:Yes with one name with faces-config.xml and antoher with different name

  • Not able to create sales order  using BAPI - BAPI_SALESORDER_CREATEFROMDAT2

    Hi Experts,
    I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
    to create sales order .I am passing external sales order number to the parameter
    SALESDOCUMENTIN.
    I am getting following error.
    "524   |Only quantity 1 EA is allowed (Item 00001"
    Here EA is UOM(Unit of measurement).
    Below is the sample program through which i am trying to create the sales order.
    *& Report  ZSDC_SALES_TEST
    report  zsdc_sales_test.
    *DATA: wa_bapi_header    TYPE bapisdhd1.
    Include Name    - ZSDC_SALES_ORD_UPLOAD_TOP
    Program Name    - ZSDC_SALES_ORD_UPLOAD_1393
    Program Title   - Include for Data Declaration  and selection screen
    Created by      - Lalitha W
    Created on      - 18-Nov-2008
    Object ID       - SD_C_1393_SALES_ORDER_UPLOAD
    Request Id      - SD3K905579
    Description - This is a common INCLUDE for data declarations and
    *selection screen details.
                            HISTORY
    Date    |Developer |Req by    | Description              |Reference ID
            |          |          |                          |
            |          |          |                          |
                               TYPE-POOLS
    *TYPE-POOLS: truxs, abap, slis.
                              TABLES
    *TABLES: t100.
                               TYPES
    types:begin of   ty_header,
            auart(4)    type c,    " Sales Order Type
            vkorg(4)    type c,    " Sales Organization
            vtweg(2)    type c,    " Distrubution Channel
            spart(2)    type c,    " Division
            kunnr_1(10) type c,    " Sold to Party
            kunnr_2(10) type c,    " Ship to Party
            augru(3)    type c,    " Order Reason
            bstkd(35)   type c,    " PO Number
            bstdk(10)   type c,    " PO Date
            ketdat(10)  type c,    " Required Delivery Date
            zterm(4)    type c,    " Payment Terms
            inco1(3)    type c,    " Inco Terms -1
            inco2(28)   type c,    " Inco Terms -2
            prsdt(10)   type c,    " pricing date
            waerk(5)    type c,    " Document Currency
            vkbur(4)    type c,    " Sales Office
            vkgrp(3)    type c,    " Sales group
            pltyp(2)    type c,    " Price List type
            kdgrp(2)    type c,    " Customer Group
            bstkd_e(35) type c,    " Ship-to-party PO number
            submi(10)   type c,    " Collective Number
            bname(35)   type c,    " Name
            ihrez(12)   type c,    " Your Reference
            kschl_1(4)   type c,    " Condition Type
            kbetr_1(11)  type c,    " Amount
            kschl_2(4)   type c,    " Condition Type
            kbetr_2(11)  type c,    " Amount
            kschl_3(4)   type c,    " Condition Type
            kbetr_3(11)  type c,    " Amount
           partner_1(25) TYPE c,    "  Partner(Bill To Party Number)
           partner_2(25) TYPE c,    "  Partner(Payer Number)
           partner_3(25) TYPE c,    "  Partner(Sales Responsible Number)
           partner_4(25) TYPE c,    "  Partner(Order admin)
           partner_5(25) TYPE c,    "  Partner(Contact person)
            partner_1(10) type c,    "  Partner(Bill To Party Number)
            partner_2(10) type c,    "  Partner(Payer Number)
            partner_3(10) type c,    "  Partner(Sales Responsible Number)
            partner_4(10) type c,    "  Partner(Order admin)
            partner_5(10) type c,    "  Partner(Contact person)
            tdspras_1(2)  type c,
            text_1(500)   type c,    " Text Before Items Z012
            tdspras_2(2)  type c,
            text_2(500)   type c,    " Invocie Up Z034
            tdspras_3(2)  type c,
            text_3(500)   type c,    " Invocie Down Z035
            tdspras_4(2)  type c,
            text_4(500)   type c,    " Customer Reference Continue Z018
            tdspras_5(2)  type c,
            text_5(500)   type c,    " Dispatch Marks/ Order Z019
            tdspras_6(2)  type c,
            text_6(500)   type c,    " Ordered By  Z003
            tdspras_7(2)  type c,
            text_7(500)   type c,    " Sales Parameters Z002
            kvgr1(3)      type c,    " Industry
            kvgr2(3)      type c,    " customer BU
    end of ty_header.
    types: begin of ty_item,
              bstkd(35)     type c,    " PO Number
              bstdk(10)     type c,    " PO Date
              bstkd_e(35)   type c,    " Ship-to-party PO number
              posnr(6)      type c,    " POSTION NUMBER
              matnr(18)     type c,    " Material Number
              kwmeng(18)    type c,    " Order Quantity
              pstyv(4)      type c,    " Sales doc. item categ
              kursk(18)     type c,    " EXCHANGE RATE****
              ffprf(8)      type c,    " DIP PROFILE
              werks(4)      type c,    " Delivering Plant
              vstel(4)      type c,    " SHIPPING POINT
              lgort(4)      type c,    " STORAGE LOCATION
              route(6)      type c,    " Route
              kurrf(18)     type c,    " EXCHANGE RATE-FI
              ntgew(18)     type c,    " Net Weight
              brgew(18)     type c,    " Gross Weight
              gewei(3)      type c,    " Weight Unit
              prctr(10)     type c,    " profit center
              abgrs(6)      type c,    " RESULT ANALYSIS KEY
              kalsm_k(4)    type c,    " COSTING SHEET
              kschl_1(4)    type c,    " Condition Type
              kbetr_1(11)   type c,    " Amount
              kschl_2(4)    type c,    " Condition Type
              kbetr_2(11)   type c,    " Amount
              kschl_3(4)    type c,    " Condition Type
              kbetr_3(11)   type c,    " Amount
              text_1(500)    type c,    " material Text 0001
              tdspras_1(1)   type c,
              text_2(500)    type c,    " Pr Text 9001
              tdspras_2(1)   type c,
           end of ty_item.
    types:  begin of ty_schedule_line,
             bstkd(35)       type c, "PO number
             bstdk(10)       type c, "PO date
             bstkd_e(35)     type c, "Ship-to-party PO number
             posnr(6)        type c, "sales doc.Item
             etdat(10)       type c, "Schedule line date
             wmeng(2)        type c, "Order Quantity
            end of ty_schedule_line.
    types: begin of ty_err  ,
            auart(4)    type c,    " Sales Order Type
            vkorg(4)    type c,    " Sales Organization
            vtweg(2)    type c,    " Distrubution Channel
            spart(2)    type c,    " Division
            kunnr_1(10) type c,    " Sold to Party
            kunnr_2(10) type c,    " Ship to Party
            augru(3)    type c,    " Order Reason
            bstkd(35)   type c,    " PO Number
            bstdk(10)   type c,    " PO Date
            ketdat(10)  type c,    " Required Delivery Date
            zterm(4)    type c,    " Payment Terms
            inco1(3)    type c,    " Inco Terms -1
            inco2(28)   type c,    " Inco Terms -2
            prsdt(10)   type c,    " pricing date
            waerk(5)    type c,    " Document Currency
            vkbur(2)    type c,    " Sales Office
            vkgrp(3)    type c,    " Sales group
            pltyp(2)    type c,    " Price List type
            kdgrp(2)    type c,    " Customer Group
            bstkd_e(35) type c,    " Ship-to-party PO number
            submi(10)   type c,    " Collective Number
            bname(35)   type c,    " Name
            ihrez(12)   type c,    " Your Reference
            kschl_1(4)   type c,    " Condition Type
            kbetr_1(11)  type c,    " Amount
            kschl_2(4)   type c,    " Condition Type
            kbetr_2(11)  type c,    " Amount
            kschl_3(4)   type c,    " Condition Type
            kbetr_3(11)  type c,    " Amount
            partner_1(25) type c,    "  Partner(Bill To Party Number)
            partner_2(25) type c,    "  Partner(Payer Number)
            partner_3(25) type c,    "  Partner(Sales Responsible Number)
            partner_4(25) type c,    "  Partner(Order admin)
            partner_5(25) type c,    "  Partner(Contact person)
            tdspras_1(2)  type c,
            text_1(500)   type c,    " Text Before Items Z012
            tdspras_2(2)  type c,
            text_2(500)   type c,    " Invocie Up Z034
            tdspras_3(2)  type c,
            text_3(500)   type c,    " Invocie Down Z035
            tdspras_4(2)  type c,
            text_4(500)   type c,    " Customer Reference Continue Z018
            tdspras_5(2)  type c,
            text_5(500)   type c,    " Dispatch Marks/ Order Z019
            tdspras_6(2)  type c,
            text_6(500)   type c,    " Ordered By  Z003
            tdspras_7(2)  type c,
            text_7(500)   type c,    " Sales Parameters Z002
            kvgr1(3)      type c,    " Industry
            kvgr2(3)      type c,    " customer BU
            message(600) type c,
      end of ty_err.
    types: begin of ty_t685a,
            kschl type kschl,
            krech type krech,
          end of ty_t685a.
                       INTERNAL TABLES
    ***header
    data:  g_krech_1(4)    type c,    " Calculation type for condition
           g_krech_2(4)    type c,    " Calculation type for condition
           g_krech_3(4)    type c.    " Calculation type for condition
          g_krech_4(4)    TYPE c,    " Calculation type for condition
          g_krech_5(4)    TYPE c,    " Calculation type for condition
          g_krech_6(4)    TYPE c,    " Calculation type for condition
          g_krech_7(4)    TYPE c,    " Calculation type for condition
          g_krech_8(4)    TYPE c,    " Calculation type for condition
          g_krech_9(4)    TYPE c,    " Calculation type for condition
          g_krech_10(4)   TYPE c,    " Calculation type for condition
          g_krech_11(4)   TYPE c,    " Calculation type for condition
          g_krech_12(4)   TYPE c,    " Calculation type for condition
          g_krech_13(4)   TYPE c,    " Calculation type for condition
          g_krech_14(4)   TYPE c,    " Calculation type for condition
          g_krech_15(4)   TYPE c,    " Calculation type for condition
          g_krech_16(4)   TYPE c,    " Calculation type for condition
          g_krech_17(4)   TYPE c,    " Calculation type for condition
          g_krech_18(4)   TYPE c,    " Calculation type for condition
          g_krech_19(4)   TYPE c,    " Calculation type for condition
          g_krech_20(4)   TYPE c.    " Calculation type for condition
    Items
    data:   g_krech_item_1(4)   type c,    " Calculation type for condition
            g_krech_item_2(4)   type c,    " Calculation type for condition
            g_krech_item_3(4)   type c.    " Calculation type for condition
           g_krech_item_4(4)   TYPE c,    " Calculation type for condition
           g_krech_item_5(4)   TYPE c,    " Calculation type for condition
           g_krech_item_6(4)   TYPE c,    " Calculation type for condition
           g_krech_item_7(4)   TYPE c,    " Calculation type for condition
           g_krech_item_8(4)   TYPE c,    " Calculation type for condition
           g_krech_item_9(4)   TYPE c,    " Calculation type for condition
           g_krech_item_10(4)  TYPE c,    " Calculation type for condition
           g_krech_item_11(4)  TYPE c,    " Calculation type for condition
           g_krech_item_12(4)  TYPE c,    " Calculation type for condition
           g_krech_item_13(4)  TYPE c,    " Calculation type for condition
           g_krech_item_14(4)  TYPE c,    " Calculation type for condition
           g_krech_item_15(4)  TYPE c,    " Calculation type for condition
           g_krech_item_16(4)  TYPE c.    " Calculation type for condition
    data: it_t685a  type standard table of ty_t685a.
    data: wa_bapi_header    type bapisdhd1,
         wa_bapi_headerx   TYPE bapisdhd1x,
          it_bapi_item      type table of bapisditm,
         it_bapi_itemx     TYPE TABLE OF bapisditmx,
          it_bapi_cond      type table of bapicond,
         it_bapi_condx     TYPE TABLE OF bapicondx,
          it_bapi_partner   type table of bapiparnr,
          it_bapi_shdl      type table of bapischdl,
         it_bapi_shdlx     TYPE TABLE OF bapischdlx,
         it_bapi_order_text type TABLE OF BAPISDTEXT,
          it_bapireturn     type table of bapiret2.
    data:  wa_bapi_item       like line of it_bapi_item,
          wa_bapi_itemx      LIKE LINE OF it_bapi_itemx,
           wa_bapi_cond       like line of it_bapi_cond,
          wa_bapi_condx      LIKE LINE OF it_bapi_condx,
           wa_bapi_partner    like line of it_bapi_partner,
           wa_bapi_shdl       like line of it_bapi_shdl,
          wa_bapi_shdlx      LIKE LINE OF it_bapi_shdlx,
          wa_bapi_order_text like LINE OF it_bapi_order_text,
           wa_bapireturn      like line of it_bapireturn.
    *DATA: zmode(1) VALUE 'N'.
    data: it_header      type standard table of ty_header.
    *DATA: it_temp_header TYPE STANDARD TABLE OF ty_header.
    data: it_item        type standard table of ty_item.
    *DATA: it_temp_item   TYPE STANDARD TABLE OF ty_item.
    data: it_err         type standard table of ty_err.
    data: it_fline1 type standard table of tline,
          wa_fline1 type tline.
    data: it_thead1 type thead.
    data: it_fline2 type standard table of tline,
          wa_fline2 type tline.
    data: it_thead2 type thead.
    data: it_fline3 type standard table of tline,
          wa_fline3 type tline.
    data: it_thead3 type thead.
    data: it_fline4 type standard table of tline,
          wa_fline4 type tline.
    data: it_thead4 type thead.
    data: it_fline5 type standard table of tline,
          wa_fline5 type tline.
    data: it_thead5 type thead.
    data: wa_header         like line of it_header,
          wa_item           like line of it_item,
          wa_err            type ty_err,
         wa_bill           LIKE LINE OF it_bill,
         wa_bill1          LIKE LINE OF it_bill,
          wa_iterr          like line of it_err,
          wa_t685a          like line of it_t685a.
         wa_bill_item TYPE ty_bill_item.
    data: it_schedule_line  type standard table of ty_schedule_line,
          wa_schedule_line type ty_schedule_line.
    data: sales_order_no     type bapivbeln-vbeln.
    data: ext_sales_order_no type bapivbeln-vbeln.
    Variable to be used to separate the fields which are concatenated by a
    runtime character
    *DATA: g_tabchar(1) TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
    *DATA: wa_truxs_t_text_data TYPE truxs_t_text_data.
    *DATA: g_filename      TYPE string,
         g_path          TYPE string,
         g_fullpath      TYPE string,
         g_user_action   TYPE i,
         g_file_encoding TYPE abap_encoding.
    *DATA : g_text(8192),
    data : g_mstring1(100) type c,
          g_mstring2(100) type c,
          g_mstring3(100) type c,
          g_mstring4(100) type c,
          g_mstring5(100) type c.
    data: g_count1 type ebelp,
          g_str_count1(6) type c.
    data: g_count type ebelp,
          g_str_count(6) type c.
    *DATA: f_subrc      LIKE sy-subrc,
         f_subrc1     LIKE sy-subrc,
         f_error(500) TYPE c,
         item1(27)    TYPE c,
         item2(27)    TYPE c,
         item3(27)    TYPE c,
         item4(27)    TYPE c,
         i            TYPE ekpo-ebelp.
    *DATA: g_billplan_header TYPE c,
         g_billplan_item TYPE c.
    data : g_external_so type vbak-vbeln. "SO
                          SELECTION-SCREEN
    selection-screen begin of block frame1 with frame title text-001 .
    parameters:p_file1 type rlgrap-filename, "OBLIGATORY, "Header data.
               p_file2 type rlgrap-filename, "OBLIGATORY, "Item Data.
               p_file3 type rlgrap-filename,            "Schedule line.
               p_file4 type rlgrap-filename ."OBLIGATORY. "Error file.
    selection-screen end of block frame1.
    start-of-selection.
      wa_bapi_header-doc_type     =  'Z0MX'. "order type
      wa_bapi_header-sales_org    =  '0130'."sales org
      wa_bapi_header-distr_chan   =  '13'.  "distr channel
      wa_bapi_header-division     =  '13'.  "division
    Old code from copied program
    wa_bapi_header-purch_no_s   =  wa_header-kunnr_2.  " Ship to party
    New code as required in Finland project
    We are using to Header ->Order Tab -> Ship to Party -> Purchase order no (BSTKD_E) to store Old legacy SO number
      wa_bapi_header-purch_no_s   =  'MX100443'.  "External SO i.e Old legacey SO number
      wa_bapi_header-ref_1_s      = '0000666666'. "Sold to party
    wa_bapi_header-ord_reason   =  wa_header-augru.
      wa_bapi_header-purch_no_c   =  'ddr1234'.    " PO number
      wa_bapi_header-purch_date   =  sy-datum.    " PO date
      wa_bapi_header-req_date_h   =  sy-datum.   " Required Delivery Date
      wa_bapi_header-pmnttrms     =  '01'.    " Payment Terms
    wa_bapi_header-incoterms1   =  wa_header-inco1.
    wa_bapi_header-incoterms2   =  wa_header-inco2.
    wa_bapi_header-price_date   =  wa_header-prsdt.    " Pricing date
    wa_bapi_header-currency     =  wa_header-waerk.    " Document Currency
    wa_bapi_header-sales_grp  =  wa_header-vkgrp. " Sales group
    wa_bapi_header-price_list   =  wa_header-pltyp. " Price list type
    wa_bapi_header-cust_group   =  wa_header-kdgrp.   " Cust Group
    wa_bapi_header-ship_type    =  wa_header-vsart.   " Shipping Type
    wa_bapi_header-purch_no_s   =  wa_header-bstkd_e. " Ship-to-party po number
    wa_bapi_header-collect_no   =  wa_header-submi.   " Collective No.
    wa_bapi_header-name         =  wa_header-bname.   " Name
    wa_bapi_header-ref_1        =  wa_header-ihrez.   " Your Reference
    wa_bapi_header-cust_grp1    =  wa_header-kvgr1.   " Industry
    wa_bapi_header-cust_grp2    =  wa_header-kvgr2.   " Customer BU
    *ENDFORM.                    " f_header
    IF wa_header-partner_1 IS NOT INITIAL.
        wa_bapi_partner-partn_role = 'AG'.
        wa_bapi_partner-partn_numb = '0000666666'.
        wa_bapi_partner-itm_number = '000000'.
        append wa_bapi_partner to it_bapi_partner.
        clear wa_bapi_partner.
    ENDIF.
      call function 'CONVERSION_EXIT_ALPHA_INPUT'
        exporting
          input  = wa_header-partner_2
        importing
          output = wa_header-partner_2.
    IF wa_header-partner_2 IS NOT INITIAL.
        wa_bapi_partner-partn_role = 'WE'.
        wa_bapi_partner-partn_numb = '0000666666'.
        wa_bapi_partner-itm_number = '000000'.
        append wa_bapi_partner to it_bapi_partner.
        clear wa_bapi_partner.
    ENDIF.
      perform f_item.
    data : order_items_inx type table of bapisditmx with header line.
      order_items_inx-material          = 'X'.  "
      order_items_inx-target_qty        = 'X'.  "
      order_items_inx-comp_quant        = 'X'.  "
      order_items_inx-trgqty_den        = 'X'.
      order_items_inx-rnddlv_qty        = 'X'.
    order_items_inx-updateflag = 'I'.
    order_items_inx-target_qu = 'X'.
      order_items_inx-plant             = 'X'.  "
      append order_items_inx.
      call function 'BAPI_SALESORDER_CREATEFROMDAT2'
        exporting
          salesdocumentin = 'MX11111152'
      order_header_in      = wa_bapi_header
             order_header_inx     = wa_bapi_headerx
      importing
      salesdocument        = sales_order_no
      tables
      return               = it_bapireturn
      order_items_in       = it_bapi_item
      order_items_inx      =  order_items_inx
      order_partners       = it_bapi_partner
       order_conditions_in  = it_bapi_cond.
      if sy-subrc is initial.
      commit work.
      endif.
    *&      Form  f_item
          text
    form f_item .
      call function 'CONVERSION_EXIT_ALPHA_INPUT'
        exporting
          input  = wa_item-posnr
        importing
          output = wa_item-posnr.
      wa_item-posnr = '000010'.
    IF sy-subrc EQ 0. "IS INITIAL.
      move wa_item-posnr to g_str_count."commented out by shakti
    ENDIF.
      wa_bapi_item-itm_number        =  wa_item-posnr.  " Line item
    WA_BAPI_ITEM-PO_ITM_NO         =  WA_ITEM-EBELP.
    wa_bapi_item-division          = wa_item-spart.
      wa_bapi_item-purch_no_c        = 'ddr1234'.   " po number
      wa_bapi_item-purch_date        = sy-datum.   " po date
      wa_bapi_item-purch_no_s        = 'MX11111112'. " Ship-to-party po number
      wa_item-matnr = 'MAXIMO_SERVICE'.
      call function 'CONVERSION_EXIT_MATN1_INPUT'
        exporting
          input        = wa_item-matnr
        importing
          output       = wa_item-matnr
        exceptions
          length_error = 1
          others       = 2.
      if sy-subrc is initial.
        wa_bapi_item-material        = wa_item-matnr.  "material
      endif.
      wa_bapi_item-target_qty        = '1'. " Order qty
      wa_bapi_item-comp_quant = '1'.
      wa_bapi_item-target_qu = 'EA'.
        wa_bapi_item-fixed_quan = '1'.
    wa_bapi_item-comp_quant        = wa_item-kwmeng.
    wa_bapi_item-trgqty_den        = '1'.
    wa_bapi_item-rnddlv_qty        = wa_item-kwmeng.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
       EXPORTING
         input  = wa_item-ps_psp_pnr
       IMPORTING
         output = wa_item-ps_psp_pnr.
    IF sy-subrc = 0.
       wa_bapi_item-wbs_elem          = wa_item-ps_psp_pnr.
    ENDIF.
      wa_bapi_item-item_categ        = 'ZMAX'.
    wa_bapi_item-ex_rate_fi        = wa_item-kurrf.
    wa_bapi_item-dli_profil        = wa_item-ffprf.   " Dynamic item processor profile
    wa_bapi_item-route             = wa_item-route.   " route
    wa_bapi_item-exchg_rate        = wa_item-kursk.
      wa_bapi_item-plant             = '2090'.   " Plant
      wa_bapi_item-ship_point        = 'FN11'.   " Shipping point
    wa_bapi_item-store_loc         = wa_item-lgort.   " stg loc
    REPLACE ALL OCCURRENCES OF  ',' IN wa_item-ntgew WITH '.'.
    REPLACE ALL OCCURRENCES OF  ',' IN wa_item-brgew WITH '.'.
    wa_bapi_item-net_weight        = wa_item-ntgew.  "
    wa_bapi_item-gross_wght        = wa_item-brgew.  "
      call function 'CONVERSION_EXIT_CUNIT_INPUT'
        exporting
          input    = wa_item-gewei
          language = sy-langu
        importing
          output   = wa_item-gewei.
       EXCEPTIONS
         unit_not_found = 1
         OTHERS         = 2.
    IF sy-subrc <> 0.
    ENDIF.
      wa_bapi_item-untof_wght        =  'KG'.  " weight unit
      replace all occurrences of  ',' in wa_item-kursk with '.'.
      replace all occurrences of  ',' in wa_item-kurrf with '.'.
    wa_bapi_item-profit_ctr        = wa_item-prctr.   " Profit center
    wa_bapi_item-resanalkey        = wa_item-abgrs.   " RESULT ANALYSIS KEY
    wa_bapi_item-cstg_sheet        = wa_item-kalsm_k. " COSTING SHEET
      append wa_bapi_item to it_bapi_item.
    endform.                    " f_item
    Thanks & regards,
    Chetan

    see the following to create sales order:-
    *& Report  ZSALESORDER
    *&DEVELOPED BY JANI KRUPA 4.10.2008
    REPORT  ZSALESORDER.
    Parameters
    Sales document type
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
    PARAMETERS: p_auart TYPE auart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Sales organization
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
    PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Distribution channel
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
    PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Division.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
    PARAMETERS: p_spart TYPE spart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SKIP 1.
    Sold-to
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
    PARAMETERS: p_sold  TYPE kunnr OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Ship-to
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
    PARAMETERS: p_ship  TYPE kunnr OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SKIP 1.
    Material
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
    PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Quantity.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
    PARAMETERS: p_menge TYPE kwmeng  OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Plant
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
    PARAMETERS: p_plant TYPE werks_d .
    SELECTION-SCREEN END OF LINE.
    Complete Deliver
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
    PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    Data declarations.
    DATA: v_vbeln            LIKE vbak-vbeln.
    DATA: header             LIKE bapisdhead1.
    DATA: headerx            LIKE bapisdhead1x.
    DATA: item               LIKE bapisditem  OCCURS 0 WITH HEADER LINE.
    DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
    DATA: partner            LIKE bapipartnr  OCCURS 0 WITH HEADER LINE.
    DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
    DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                             WITH HEADER LINE.
    DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                             WITH HEADER LINE.
    DATA: lt_schedules_ink    TYPE STANDARD TABLE OF bapisdhead1
                             WITH HEADER LINE.
    Initialization.
    INITIALIZATION.
    v_text   = 'Order type'.
    v_text1  = 'Sales Org'.
    v_text2  = 'Distribution channel'.
    v_text3  = 'Division'.
    v_text4  = 'Sold-to'.
    v_text5  = 'Ship-to'.
    v_text6  = 'Material'.
    v_text7  = 'Quantity'.
    v_text9  = 'Plant'.
    v_text10 = 'Complete delivery'.
    Start-of-selection.
    START-OF-SELECTION.
    Header data
    Sales document type
      header-doc_type = p_auart.
      headerx-doc_type = 'X'.
    Sales organization
      header-sales_org = p_vkorg.
      headerx-sales_org = 'X'.
    Distribution channel
      header-distr_chan  = p_vtweg.
      headerx-distr_chan = 'X'.
    Division
      header-division = p_spart.
      headerx-division = 'X'.
      headerx-updateflag = 'I'.
    *Complete delivery
        header-COMPL_DLV = p_autlf.
        header-COMPL_DLV = 'X'.
    Partner data
    Sold to
      partner-partn_role = 'AG'.
      partner-partn_numb = p_sold.
      APPEND partner.
    Ship to
      partner-partn_role = 'WE'.
      partner-partn_numb = p_ship.
      APPEND partner.
    ITEM DATA
      itemx-updateflag = 'I'.
    Line item number.
      item-itm_number = '000010'.
      itemx-itm_number = 'X'.
    Material
      item-material = p_matnr.
      itemx-material = 'X'.
    Plant
      item-plant    = p_plant.
      itemx-plant   = 'X'.
    Quantity
      item-target_qty = p_menge.
      itemx-target_qty = 'X'.
    item category
      itemx-ITEM_CATEG = 'X'.
      APPEND item.
      APPEND itemx.
      ITEM DATA
      itemx-updateflag = 'I'.
    Line item number.
      item-itm_number = '000020'.
      itemx-itm_number = 'X'.
    Material
      item-material = p_matnr.
      itemx-material = 'X'.
    Plant
      item-plant    = p_plant.
      itemx-plant   = 'X'.
    Quantity
      item-target_qty = p_menge.
      itemx-target_qty = 'X'.
      APPEND item.
      APPEND itemx.
      Fill schedule lines
      lt_schedules_in-itm_number = '000010'.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = p_menge.
      APPEND lt_schedules_in.
      Fill schedule line flags
      lt_schedules_inx-itm_number  = '000010'.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'X'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
      Fill schedule lines
      lt_schedules_in-itm_number = '000020'.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = p_menge.
      APPEND lt_schedules_in.
      Fill schedule line flags
      lt_schedules_inx-itm_number  = '000020'.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'X'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
    Call the BAPI to create the sales order.
      CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
           EXPORTING
                sales_header_in     = header
                sales_header_inx    = headerx
           IMPORTING
                salesdocument_ex    = v_vbeln
           TABLES
                return              = return
                sales_items_in      = item
                sales_items_inx     = itemx
                sales_schedules_in  = lt_schedules_in
                sales_schedules_inx = lt_schedules_inx
                sales_partners      = partner.
    Check the return table.
      LOOP AT return WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      IF sy-subrc = 0.
        WRITE: / 'Error in creating document'.
      ELSE.
    Commit the work.
        COMMIT WORK AND WAIT.
        WRITE: / 'Document ', v_vbeln, ' created'.
      ENDIF.

  • I installed ios 7 in iphone 4 - i am not able to create event in calender ,   icon is not active

    i installed ios 7 in iphone 4 - i am not able to create event in calender ,   icon is not active

    You will have to upgrade your operating system version and possibly your whole computer.  We cannot provide more information easily until we know more about your system.
    Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
    Apple does tell you about required equipment for the iPhone -- in 8 point medium gray type on a light gray box.   The Store associates kind of automatically assume everybody is running a new model computer and the one I met when we bought our iPhone had never seen a pre-2008 Mac and was somewhat puzzled why anybody would own such an antique.

  • Not able to create EAR file for WAR file extracted project

    Hi Experts,
    I am trying to import a WAR file, make changes to the project and create an EAR file for the same. I am not able to remove import
    errors despite of adding required jar files to it.
    Also, I am not able to create an EAR file for the same.
    I have copied the steps here with screen shots. Below are the steps :
    Import WAR file in NWDS 7.3 – Enterprise Portal perspective
    Select WAR file to create WAR and EAR project for it.
      Project created with import errors.     e.g – com.sapportals.portal.prt*
    Found jar file from Class – target jar file table. 
    e.g – for Class com.sapportals.portal.prt.resource.IResource needed jar file is tc~epbc~prt~api.jar
    Copied required jar files in WEB-INF -> lib folder.
    Configure Build path and Add External jars.
    Portalapp file screen shot
    I think errors should go now, but they still exist.
    Next I right click on WAR project and tried updating related EAR project.
      Next, Export EAR file from EAR project.
       I have tried both EAR types.
    But EAR file is not created.
    Please help me in removing the errors.
    Thanks in advance :-)
    Anubha Pandey

    Hi Anubha,
    I feel that you're missing JAR dependencies and hence not able to resolve the above import errors.
    Please go through the below thread for the AFP Masthead customization and follow the same:
    How to download and change AFP Masthead on SAP Portal 7.3
    Hope, this will help!!!
    BR,
    Anurag

  • Not able to create interactive pdf

    Hello everyone,
    I'm not able to create an offline pdf using exclusively ABAP. I tried using the tutorial "Offline Interactive Forms Using ABAP" but i'm missing something. I allready created the form using transaction SFP, and my ABAP program is like this:
    REPORT ztest_interactive_forms.
    DATA: wa_lfa1 LIKE lfa1.
    DATA: fm_name TYPE funcname.
    DATA: fp_outputparams TYPE sfpoutputparams.
    DATA: fp_docparams TYPE sfpdocparams.
    DATA: fp_formoutput TYPE fpformoutput.
    PARAMETERS: p_lifnr LIKE lfa1-lifnr.
    START-OF-SELECTION.
    SELECT SINGLE lifnr name1 name2 ort01 FROM lfa1 INTO CORRESPONDING FIELDS OF wa_lfa1 WHERE lifnr = p_lifnr.
    first get name of the generated function module
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
    i_name = 'ZTEST_NCS'
    IMPORTING
    e_funcname = fm_name.
    Set output parameters and open spool job
    fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
    fp_outputparams-getpdf = 'X'. " launch print preview
    CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel = 1
    usage_error = 2
    system_error = 3
    internal_error = 4
    OTHERS = 5.
    Set form language and country (->form locale)
    fp_docparams-langu = 'E'.
    fp_docparams-country = 'US'.
    fp_docparams-fillable = 'X'.
    Now call the generated function module
    CALL FUNCTION fm_name
    EXPORTING
    /1bcdwb/docparams = fp_docparams
    vendor_data = wa_lfa1
    IMPORTING
    /1bcdwb/formoutput = fp_formoutput
    EXCEPTIONS
    usage_error = 1
    system_error = 2
    internal_error = 3
    OTHERS = 4.
    Close spool job
    CALL FUNCTION 'FP_JOB_CLOSE'
    EXCEPTIONS
    usage_error = 1
    system_error = 2
    internal_error = 3
    OTHERS = 4.
    When function module "fm_name" is called, variable fp_formoutput is returned blank (0 pages).
    Can anyone help or suggest something ?
    Thank you in advance,
    Nuno Santos

    Hi,
    The default export parameter is /1bcdwb/formoutput of type
    fpformoutput. This parameter has to be evaluated in the calling program if the
    resulting document needs to be handled by the program itself. Export parameters
    can be added only for those interfaces that are compatible with Smart Forms.
    There is also only one standard exporting parameter of the form's generated
    function module: /1bcdwb/formoutput of type fpformoutput. It contains three
    fields:
    . pdf: Contains the PDF data in hexadecimal form if parameter getpdf of
    function module FP_JOB_OPEN is set to 'X'. This is required if your
    program has a download functionality or if you want to pass on your PDF to
    Business Communication Service to fax or e-mail it.
    Detail information on Business Communication Service can be found in the
    SAP Library, Topic .Generic Business Tools for Application Developers
    (BC-SRV-GBT).. See also standard demo reports BCS_EXAMPLE_...
    . pdl: contains the PDL data in hexadecimal form if parameter getpdl of
    function module FP_JOB_OPEN is set to 'X'.
    . pages: returns the number of pages that have been printed.
    There is also only one standard exporting parameter of the form's generated
    function module: /1bcdwb/formoutput of type fpformoutput. It contains three
    fields:
    . pdf: Contains the PDF data in hexadecimal form if parameter getpdf of
    function module FP_JOB_OPEN is set to 'X'. This is required if your
    program has a download functionality or if you want to pass on your PDF to
    Business Communication Service to fax or e-mail it.
    Detail information on Business Communication Service can be found in the
    SAP Library, Topic .Generic Business Tools for Application Developers
    (BC-SRV-GBT).. See also standard demo reports BCS_EXAMPLE_...
    . pdl: contains the PDL data in hexadecimal form if parameter getpdl of
    function module FP_JOB_OPEN is set to 'X'.
    . pages: returns the number of pages that have been printed.
    Note:
    . getpdf: If set to 'X', the /1bcdwb/formoutput-pdf field of the form's generated
    function module will contain the PDF data in hexadecimal form. This is
    helpful for further processing the PDF file. A preview will not be possible if
    getpdf = 'X'
    Hope this will be helpfull.
    Regards
    Adil
    Edited by: Syed  Abdul Adil on Jun 17, 2008 4:23 PM
    Edited by: Syed  Abdul Adil on Jun 17, 2008 4:24 PM

  • Not able to create pdf

    Hello everyone,
    I'm not able to create an offline pdf using exclusively ABAP. I tried using the tutorial "Offline Interactive Forms Using ABAP" but i'm missing something. I allready created the form using transaction SFP, and my ABAP program is like this:
    REPORT  ztest_interactive_forms.
    DATA: wa_lfa1 LIKE lfa1.
    DATA: fm_name TYPE funcname.
    DATA: fp_outputparams TYPE sfpoutputparams.
    DATA: fp_docparams TYPE sfpdocparams.
    DATA: fp_formoutput TYPE fpformoutput.
    PARAMETERS: p_lifnr LIKE lfa1-lifnr.
    START-OF-SELECTION.
      SELECT SINGLE lifnr name1 name2 ort01 FROM lfa1 INTO CORRESPONDING FIELDS OF wa_lfa1 WHERE lifnr = p_lifnr.
    first get name of the generated function module
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = 'ZTEST_NCS'
        IMPORTING
          e_funcname = fm_name.
    Set output parameters and open spool job
      fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
      fp_outputparams-getpdf = 'X'. " launch print preview
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = fp_outputparams
        EXCEPTIONS
          cancel          = 1
          usage_error     = 2
          system_error    = 3
          internal_error  = 4
          OTHERS          = 5.
    Set form language and country (->form locale)
      fp_docparams-langu = 'E'.
      fp_docparams-country = 'US'.
      fp_docparams-fillable = 'X'.
    Now call the generated function module
      CALL FUNCTION fm_name
        EXPORTING
          /1bcdwb/docparams  = fp_docparams
          vendor_data        = wa_lfa1
        IMPORTING
          /1bcdwb/formoutput = fp_formoutput
        EXCEPTIONS
          usage_error        = 1
          system_error       = 2
          internal_error     = 3
          OTHERS             = 4.
    Close spool job
      CALL FUNCTION 'FP_JOB_CLOSE'
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          OTHERS         = 4.
    When function module "fm_name" is called, variable fp_formoutput is returned blank (0 pages).
    Can anyone help or suggest something ?
                                  Thank you in advance,
                                         Nuno Santos

    Does this happen with all ID files or just some files? What OS? Try to create a one work ID file with Times New Roman and let the file contain a single word? Can you create a pdf?

  • Not able to create J2EE user DDIC in portal

    Hi All,
    I am trying to configure the BI 7.0  system in EP 7.0. My systems are running on Windows 2003 32 bit edition. SP level is SPS11 & SP10
    I have configured the UME where datasource is ABAP system. After using the supportdesk tool I am getting the below three erros in the system.
    Import of Web Templates in active version will fail because the J2EE user DDIC is not properly mapped to an ABAP user other than DDIC Maintain a user mapping for J2EE user DDIC - see note 945055 for details
    Check could not be executed because retrieval of WebAS ABAP settings failed Check connectivity to WebAS ABAP and make sure the ABAP coding correction from note 937697 is applied in the latest version available
    Check could not be executed because retrieval of WebAS ABAP settings failed Check connectivity to WebAS ABAP and make sure the ABAP coding correction from note 937697 is applied in the latest version available
    To resolve these issues i tried to create user id DDIC in portal but I am not able to create it. It is giving below error
    A user with the specified logon ID already exists; choose a different, unique logon ID
    As it is trying to create this user id in ABAP datasource. Please let me know how to create DDIC in J2EE engine where ABAP is the datasource.
    Please help me resolve this issue.
    Thanks,
    Shambo

    Hi,
    In defaulttrace.trc I am getting the below errors
    #1.5#00055D4A98DC0061000004BC00001610000460FCEAE15F00#1232539295495#com.sap.ip.bi.preexecutionservices.PreexecutionservicesRfcService#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.preexecutionservices.PreexecutionservicesRfcService#Administrator#9873####403302b0e7b311ddbd4500055d4a98dc#SAPEngine_Application_Thread[impl:3]_27##0#0#Fatal#1#/Applications/BI#Plain###Exception caught: com.sap.ip.bi.base.exception.BIBaseRuntimeException: SAX Exception
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: SAX Exception
         at com.sap.ip.bi.webapplications.runtime.preexecution.impl.PreexecutionDispatcher$DocumentAnalysis.createMutableDocument(PreexecutionDispatcher.java:93)
         at com.sap.ip.bi.webapplications.runtime.preexecution.impl.PreexecutionDispatcher.validateDocument(PreexecutionDispatcher.java:571)
         at com.sap.ip.bi.preexecutionservices.PreexecutionservicesRfcService.handleRequestForRSWR_PREEXECUTION_PROXY(PreexecutionservicesRfcService.java:109)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.handleServiceRequestGeneric(BIServicesRfcDispatcherService.java:283)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:177)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:235)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0_0.processFunction(PRTRFCRemoteObjectImpl0_0.java:118)
         at sun.reflect.GeneratedMethodAccessor299.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy119.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:284)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:254)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:59)(:main:, row=1, col=59) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:59)
         at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
         at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
         at com.sap.ip.bi.webapplications.runtime.preexecution.impl.PreexecutionDispatcher$DocumentAnalysis.createMutableDocument(PreexecutionDispatcher.java:85)
         ... 28 more
    Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:59)
         at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1590)
         at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1710)
         at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2843)
         at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
         at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
         at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
         at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
         ... 30 more
    #1.5#00055D4A98DC0061000004BF00001610000460FCEAE18738#1232539295511#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.application.message.impl.MessageBase#Administrator#9873####403302b0e7b311ddbd4500055d4a98dc#SAPEngine_Application_Thread[impl:3]_27##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Transformer exception while transforming BEx Web templates
    com.sap.ip.bi.deploytime.BISP2Jsp SAPXMLTransformer
    SAX Exception
    Transformer exception while transforming BEx Web templates
    com.sap.ip.bi.deploytime.BISP2Jsp SAPXMLTransformer
    SAX Exception#

  • Not able to create a java class included in custom jar from script

    Hi,
    We need to call a third-party web service from within SAP Sourcing and so we have created and deployed a custom JAR. However I am not able to create any of the custom classes included in this object. I have created a simple JAR file having just a "Hello World" message and got our BASIS team to deploy this (they deployed using the steps mentioned in Installation Guide Section 4.2.4 - we are using Sourcing Wave 9). I have added the required import statement in my test script and included this line:
    HelloWorld test = new HelloWorld();
    When this script executes, it gives the error:
    Class:HelloWorld not found in namespace.
    Can you please give your suggestions on how to fix this error?
    Thanks,
    Gayathri

    The issue was fixed after including the custom jar in esourcing90/lib folder and redeploying

  • Not able to create new entry in RSADMIN Table

    Hi All,
            I am going thru the OSS note 1275837  (Note 1275837 - PrecServer: process based load distribution (ABAP part)), as it recommends
            add the entry "BWPREC_USE_NEW_LOAD" with value "X" in table "RSADMIN"
          When I check in SE11 and SE16 there is no option to create button for above entry in table RSADMIN.
          Please advise for any help to create above entry.
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Jan 11, 2010 4:20 PM
       I got access key from our basis team. But still not able to create new entry as mentioned in OSS note. Any further help....
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Jan 11, 2010 9:13 PM

    Hi
    Goto SM30 - Table Maintanance Generator and enter the table name and click on button maintain ,it will show the error message
    "The maintenance dialog for RSADMIN is incomplete or not defined" because the table maintenance is not allowed manually.
    First Option
    When you double click the error message  a performance assistant screen will open in that you can see Procedure
    "Generate the required maintenance dialog" click on that and try to maintain the table using Access Key, as i dont have access key i have not tried this option.
    Second Option
    You can write an SE38 program with an insert statement.
    TABLES rsadmin.
    DATA: wa TYPE rsadmin.
    wa-object = 'object name'.
    wa-value = 'X'.
    INSERT into rsadmin values wa.
    Thanks

  • GRC 10 ERM Not able to create Business/Single Role

    Hello Experts,
    In GRC 10, ERM, i have completed all the pre-requisites i.e. Maintaining Connectors, Configuration for Role Management, Maintained and generated the default MSMP workflow (methodology), maintaining role owners.
    Now when i am trying to create a business role or let's say a single role i am unable to to do so as the edit button is disabled.
    I just can't get through this.
    Have i missed anything, and for the record when i tried to Import the Role(Under Role mass maintenance) from backend system i was successfully able to do so and that way only i could get my first role in GRC via import.
    Now if i open this role and try to edit it, can;t do again, because edit button is disabled. But if i perform Role Update(Under Role Mass Maintenance) i can successfully change the attributes and other information and am able to see the new values.
    Why is it like this, i am not able to create Roles in GRC, just i am able to import and update from backend.
    This is really frustrating..what i am missing over here.
    Experts pl. Kindly help!

    Hi Triera,
    1) After opening BRM, Create button is not greyed out. Its available, and if i click on it, then i see all the possible type of Roles that i can create i.e. Business role, composite role, Group, PD Profile, Profile, Single Role, Template etc.
    2) When i try to edit a role by clicking on "Open" , and when the role opens, and then if I click on "Additional Details" (you said "More Details" , i believe you meant that only) link, then also the Edit button is not enabled. Its still greyed.
    What else could this issue be possibly about.
    Configuration- Check.
    Authorizations- Check.
    Workflow- Check.
    Should i raise it with SAP.
    Thanks.

  • Not Able to create ODBC Connections to AS400 DB2 from OWB 11g

    Hi,
    Currently i am in the process of setting up of database connections to AS400 DB2 Database from Oracle Warehouse Builder 11g.
    I installed Oracle 11.1.0.6.0 and upgraded to 11.1.0.7.0.
    I am able to create database links manually but not able to create using oracle warehouse builder.
    The error i am getting error
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [IBM][Client Access Express ODBC Driver (32-bit)][DB2/400 SQL]SQL7973 - SQL create package for DG4ODBCFBA in REMOTEDB has failed.
    ORA-02063: preceding 2 lines from OWB_82
    I am trying different methods from the last 2 days.
    Please help me in this situation.
    Thanks.
    Salih KM

    My Http server port is 7777. used that , it doesn't work. Using 7101(admin server port) also doesn't work.
    Testing JSR-160 Runtime ... failed.
    Cannot establish connection.
    Testing JSR-160 DomainRuntime ... skipped.
    Testing JSR-88 ... skipped.
    Testing JSR-88-LOCAL ... skipped.
    Testing JNDI ... skipped.
    Testing JSR-160 Edit ... skipped.
    Testing HTTP ... success.
    Testing Server MBeans Model ... skipped.
    1 of 8 tests successful.
    Both the cases only HTTP is success.
    Thanks
    Manish

Maybe you are looking for

  • Which table has auc to wbs element relationship stored

    Hello everyone, I have to write a report on costs for AUC.  I have following scenario: auc1-----wbs2--internal order4 ............... |---- internal order3 ............... wbs1----internal order1 ............... |------internal order2 ...............

  • Table space

    Hi We have ARFCSSTATE table size as 20 gig I have removed the entries in ARFCSSTATE table using a report now ARFCSSTATE table is empty But its not showing up I know for this we need to use brtools Can anyone tell me what options should I select in BR

  • MDT Refresh doesn't clean recycle bin

    Hello, Has anyone dealt with the fact that the, "Clean Disk" performed by LTIApply.wsf marks the Recycler folder as a protected folder and doesn't clear it out? Essentially leaving the contents of the user's recycle bin beyond after reimage? Is there

  • Which files prevent a normal boot on Maverick 10.9.5?

    What can I do to check files that could be preventing the boot to go passed the spinning wheel/grey screen preventively ? An October 2nd restart of OSX 10.9.5 on my iMac 2,9 Ghz Intel Core i5 resulted in the too famously known "grey screen with spinn

  • Reset time on hp 4632 windows 7?

    how do i reset time and date on hp 4632 with windows 7