Not able to find entity details in Controls monitor

Hi Experts,
We could not find the entity details in controls monitor.
Our System Details BPC 10.1 SP2
We have defined Controls, Control set and assigned the control set and activated control and work status. Maintained control level in Entity dimension.
Request to help me what could be the reason not able to see the entity details in control monitor.
Regards,
Chandra

Hi Experts,
Did any one come across like my issue and found solution?
Please share solution.
Regards,
Chandra

Similar Messages

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Not able to find the open items in SO & delviery

Dear friends,
When i check in the T code FD33 , sales value filed is showing with certain amt .System is not allowing to process the SO, as it is active with credit control.
Can you guide me in finding the open sales orders and open deleveries in the system.I am checking the same in VA05 and VL06.Not able to find a single document.
Please guide me in closing the same,....
Regards
Mahendar.

You can Check in tables
S066 - Open Orders Value
S067 - Open Deliveries and Open Billing Document values
Check your Automatic Credit control settings in OVA8. if You Selected Reaction B or D then you cannot create a sales order but if you have selected Reaction A or C for your Static or Dynamic Checks then you can create the order with a Credict block,
If the Order is on Credit Hold then you go to either VKM3 or VKM4 to release the block.
Thx

Not able to find out invoice level for customer collection

Hi Experts,
We are not able to find out invoice level payment details for the collection
They are provided collection amount and reference no, but here problem is customer have more than 20 company codes and they cleared in multiple co.codes , also user not maintained any reference while clearing the invoice, so we only able to find out the collection amount but we dont know for which invoice it is cleared.
can any one help us,

The given link take to the window where CPU patch for all the quarter available.
The Critical Patch Updates released to date are listed in the following table.
Critical Patch Update Latest Version/Date
Critical Patch Update - October 2012 Rev 1, 16 October 2012
Critical Patch Update - July 2012 Rev 1, 17 July 2012
Critical Patch Update - April 2012 Rev 2, 19 July 2012
If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
There for the database products it shows the below option.
Table 9 Patch Availability for Oracle Database 11.2.0.3
+*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
Thanks
SHIYAS M

HT1657 after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

Not able to find the required upgrade patch for 10.2.0.2

Hi all,
I am trying to upgrade my database from 10.2.0.1 to 11.2.0.2, for which first i need to upgrade it to 10.2.0.2. But am not able to find the same in the support.oracle.com , please advice.
Platform details :
[ora10g@www ~]$ uname -a
Linux www.benefits.com 2.6.18-164.el5 #1 SMP Thu Sep 3 02:16:47 EDT 2009 i686 i686 i386 GNU/Linux
Database details :
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Thanks and Regards,
Littlefoot

The 10.2.0.2 patch is 4547817 - see this MOS Doc
Quick Reference to Patchset Patch Numbers [ID 753736.1]
HTH
Srini

Not able to find R/3 PO# in SRM....

Hi All
We are having SRM4.0 and R/3 4.7 as backend with classic scenario.No BW installed.
We are developing a custom report in SRM to find the details of SC and PR for a selected PO.
We are succesfull to get the details if the PO is created directly from SC after approval.
But if PR is created for a SC then in R/3 PR would be converted into PO. Here we are not able to find this PO# in SRM tables.
Can anyone tell me in which table can we find the PO# in SRM table if PO is created from PR in R/3.
Thanks in advance
Jagadish

Yann
BAPIEBAN is a structure and not a table to select the data. I tried with that earlier. I am thinking from where the data is picked into BAPIEBAN.
I understand system is using FMs to call the data.
Is there any FM that will fetch SC details by giving PO as parameter?
Vangala
There are no entries in BBP_PDBEH. BBP_PDBEI will have PO only if PO is created from SC without a PR.
The only thing I left is to call to R/3 table through RFC.
In order to avoid that I was looking for something in SRM itself.
Any other try please let me know.
Regards
Jagadish

Not able to find 0SRM_TD_LA_1 Datasource in SRM

Hi Team,
We are not able to find out the 0SRM_TD_LA_1 - SRM Live Auction Transactional Data
Datasource in SRM system.
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/55/9a39726528490a87c90bf011e34c54/content.htm
Below are the package detail of SRM and BW system.
BW - 702 - 008
SRM - 701 - 004
Kindly help us on this ASAP. We are looking for standard Auction datasource in SRM for create report in BW.
Regards,
Ashish

Got the solution.
Regards,
Ashish

LR 4 RC2 ...vexing problem, 3 sessions with support and still not able to find? With all settings re

LR 4 RC2 ...vexing problem, 3 sessions with support and still not able to find? With all settings reset and running a test catalog a raw image when opened in develop will when imediately going back to library view show a significant color shift in red, orange and purple but only in images with significant content in those colors. at first the culprit appeared to be camera calibration default but not reproducable. The problem exists even when opening older images from months ago? Also if second screen running in loupe mode the image is not shifted.
Any ideas please
Dave

Jim01403, Geoff and others...I'm new here so I'll need a little time The thread is very interesting, populated by serious mature people, how refreshing! It clearly is part of what i'm experiencing and is answered answered here...thank you. My main problem is still the significant color shift between develope and library modules. I'll attach one from each so you and others can see. Unfortunately the library version is the bad one so printing is now very problematic...Note, this occurs in either single or with second monitor on the library version is displayed. I have reset virtually everything and wonder if a cache is not updating or color space is not matching? A symptom/detail worth noting, when switching to library mode, the correct image is displayed for about a second then it jumps to what you see in the examples. As if the library module starts to rendering from develope settings then jumps tback to the original inedited preview??
Maybe just go back to 3.6 and tread water till 4.1 is fixed?
Dave

Not able to find the HR Integrator Function in the Function

Dear All,
I am not able to find out the HR Integrator function in the Functions. Kindly do i need to do any setups or any other things to get this in place.
We are using Version R 12.0.6
Thanks and Regards,
Joshna.

Hi Duncan,
Sorry for the late response.
Please find the issue below.
- we wanted to create an HR Integrator for the Requisition and vacancy. For this we find the steps in the metalink. Please find the steps below.
When we are doing 5 th step we are not able to find the "HR Integrator" in the list of values. So we went and check the Menu there we find that HR Integrator function is not attached to the Menu. We tried to call that function but we are not finding that Function.
1.Check your IE and Excel/Word Settings.
2.Select the ‘Desktop Integration’ Responsibility
3.Click ‘Create Document’ function
4.Uncheck the Reporting Checkbox as this integrator is for uploading. Select the Viewer as Excel
5.Select the ‘HR Integrator Setup’ as the Integrator.Click "Next"
6.Select Content as "None" as we need to create the blank document for upload and Click "Next"
7.Click on "Create Document "
8.Once the spreadsheet is created, enter the following details and upload it back into the system.
Metadata Type : DOWNLOAD – to create download integrators
UPDATE – to create download / upload integrators
Application Short Name : PER
Integrator User Name : <User Defined Name for Integrator>
View Name : <User Defined View>
Form Name : Name of the Form to which the integrator is to be associated
API Package Name : API Package Name used to Upload Data (Only for UPDATE Integrators)
API Procedure Name : API Package Procedure (Only for UPDATE Integrators)
API Type : PROCEDURE / FUNCTION
Click on Oracle -> Upload to create the integrator
9.Define a Function using System Administrator -> Application -> Function. This function will be used to restrict the Responsibilities for which a particular integrator is available.
Function = Internal Function Name
User Function Name = User Defined Function Name
10.Create the Form Function Association Document using Web ADI Menu –Desktop Integration -> Create Document
Select Integrator as "HR Maintain Integrator Form Function Associations" and repeat step 4
11.Select the application in which the integrator is defined and the Integrator User Name for the Form Function Association has to be done. Click Next to continue.
12.Click on "Create Document" and Attach the Form Function created in step 9 i.e.Internal Function Name to the Integrator in the document created in the above step and upload the same.
13.Define the Layout for the Integrator created in above steps using
Desktop Integration -> Define Layout
14.Select the integrator for which the Layout has to be defined and click Go to continue.
15.Select the columns that will be displayed and click Apply
16. Navigate to the Form which you have attached in step 8 and Click on Export Icon.
You will be able to view the Integrator.

Not able to find erroneous records in psa

hi sdn
In monitor I have some records for which bw is saying that these records are having invalid characterstic but unfortunately when i'm seeing in psa table i'm not able to find them out,
can some body give me the clues regarding this
rubane

Hi
Have you did what i suggested
Select the PSA record. Open all the records. Now select the status column by pressing the header. Now press the sort button. red requests all will be in the bottom of the data record set.
Check in the monito detail list which PSA data packet is having errors. All PSA data packets will not have errors . Only a few data packets will have error records. Select that data packet and do what is suggested
To find out which data packet is having error see the detail screen of the monitor and open all the messages there in the transfer rules
Regards
N Ganesh

Not able to find data in Cube

Hi All,
Good Evening!
I am loading data from ODS to Cube. I am not able to find values for 0ORDER_CURR in the cube and also in the report which I built on the Cube. But they are present in the ODS.
Please help me to find the problem. Thanks in Advance...
With regards
Mahi

Hi Mahi..
Try to check is there mapping in ur Update rules for this 0ORDER_CURR.. if not then maintain the same..
Also let us know whether u have used this object at the cube level or not??? if not then try to maintain and then maintain the mapping as well from the DSO.....
this will solve the issue....
thanks..
Assign points if this helps...

Not able to find driver page for HP 15-r007tx

Not able to find driver page for HP 15-r007tx.
The web site is able to detect my product, but when clicked on link Software & Driver Downloads, it says page not found.
Please help. I am looking drivers for windows 7 ultimate.

Hi Anoop22Sharma
Install:
Intel Chipset Installation
Intel Video Driver
NVIDIA High-Definition (HD) Graphics Driver
Synaptics Mouse Driver
Realtek Ethernet Controller Drivers
MediaTek(Ralink)802.11 b/g/n Wireless LAN (WLAN) Adapter
Ralink Bluetooth Software Driver
Intel USB 3.0 Driver for Intel 8 and U/Y Series
Realtek High-Definition (HD) Audio Driver
Realtek PCIe Media Card Reader Driver
HP 3D DriveGuard

Not able to find values in LOV of field "Help Desk" of Global contract

Not able to find values in LOV of field "Help Desk" of Global contract defaults.
This value should be coming from resource setup.
Resource is already created.

Issue resolved:
The resource should ahve valid Email id in HR People setup

I am not able to find Template Builder in MS Word 2003

Hi All,
we have installed MS Word 2003 Ver in our work station for BI Publihser Reports, but i am not able to find the template builder in the Menu bar.
i was try to add in tool -> Template and add-Ins also, but still i dint get the template builder in top menu's.
Any one can help me on this.
Thanks in advance.
Regards,
Loganthan

Hi,
Did you installed BI Publisher first? usually we installed MS Word first then BI Publisher then it appears in the top bar.
HTH,
Vikas

Not able to find entity details in Controls monitor

Similar Messages

Maybe you are looking for