Not able to find final Item in configurator R 12

Hi Guru's
I have created Model class item as CAR, Option Class items as : Tyre and Brakes.
Then finished Items as Rubber Tyres, Mac Tyres and Normal Brakes, Disc Brakes respectively for Tyres, Brakes.
In the configurator screen not able to find Finished items (Rubber Tyres, Mac Tyres ,Normal Brakes, Disc Brakes)
I am going through om and then click on configure for assembling.
Please advice on this.
Regards
Sunny

Hi Sandeep,
Thanks for the information.
Yes, added the Disc Brake and Normal Brake to the Brakes-OC BOM.
In the Brakes-OC BOM, ensure that these items are listed as optional-
Yes, this is done checked optional under om tab.
Go to the master org ; open up the indented CAR BOM. Make sure the whole BOM shows up-Everything comes perfectly here.
However still have the same problem gives the below error message in configurator screen.(Note this is in Vision instance R12)
[Session Valid] The configuration currently is valid.
[Session Incomplete] Tyres is unsatisfied.
[Session Incomplete] Brakes is unsatisfied.
Regards
Sunny

Similar Messages

Not able to find ATP check button while editing items in Quotation(CRM 7.0)

Hi,
I am trying to edit the Packaged Quotation in CRM WEB UI. I need to do ATP check for the Items. But, I am not able to find any button for ATP check ( check Availability).
Can you plese let me know where can I find this button ....
Or
Do we need to do any configuration for this?
Thanks,
Sandeep

Hi,
I am trying to create from WEB UI (CRM 7.0). But, still I am not able to see any button for ATP.
Can you please tell me, where can we find this button....
Do we need to do any configuration for this button to be displayed....or is there any condition for the button to be displayed?
Please help me in this regard !!!!
Thanks,
Sandeep

EDQP: After creation of Item definition, not able to find the the same item in Standardize items tab.

Hello Experts,
This is the first time am creating the item definition in the data lens, after creation of item definition, thought of standardizing it through Standardization Items tab. Not able to find the created item definition in the Item Definition Field LOV.
Do we need to do any set up to get it available in the Standardization Items tab. For information, I found two things as follows
1.this item has not assigned to any of sample data records.
2.Did not find created item definition name in the Item definition field..( It has showing only text as 'Not Item Definition')
Can any plz help me in creating Item definition completely. After gone through the Knowledge studio ref guide developed to some extent.
Thanks,
SSagar.

Can you put some screenshots of what you did and what you are seeing?

Not able to find the open items in SO & delviery

Dear friends,
When i check in the T code FD33 , sales value filed is showing with certain amt .System is not allowing to process the SO, as it is active with credit control.
Can you guide me in finding the open sales orders and open deleveries in the system.I am checking the same in VA05 and VL06.Not able to find a single document.
Please guide me in closing the same,....
Regards
Mahendar.

You can Check in tables
S066 - Open Orders Value
S067 - Open Deliveries and Open Billing Document values
Check your Automatic Credit control settings in OVA8. if You Selected Reaction B or D then you cannot create a sales order but if you have selected Reaction A or C for your Static or Dynamic Checks then you can create the order with a Credict block,
If the Order is on Credit Hold then you go to either VKM3 or VKM4 to release the block.
Thx

Not able to find entered price in Order

Hi Team,
While creating an order i have lanuch the configurator and selected required item and entered the price , but when i saved and came back to ordermanagement form i am not able to find the price, insted of entered price it showing as '0', Please let me know where i need to check for this?
Note: We found that for the item Price list shows as "0".
Thanks

Hello,
List Price Is Not Displayed In Configurator Summary [ID 731385.1] Look at.
Regards,
Luko

Not able to process open items using F-53

Hello All,
I am trying to process open items using F-53, I m getting error message as "Entry SAG1 is missing in table T043G". This was working fine for GL accounts, but failing for vendors.
I checked the tolerance group for same and its fine and also tried checking table se16, but not able to find the root cause of issue. please let me know how can i resolve this.
Thanks in advance.
--Sagar

HI,
Check following...
1. Make sure you have created one null (Blank) tolrance group using transaction OBA3 for your company code SAG1...
2. If you do not want to create null tolerance group then make sure you have mapped the tolerance group created to the customer master and also see the use assignment...
Regards,
Chintan Joshi

Question - are we not able to create indexed items in custom folders?

Just a question here. I would like to use the index/Value option for parameters in a workbook. This is where the List of Values drop down box for the parameter would show both the index number and the value and let you choose to select based on the index or on the value. An obvious example of this would be with months, where you would have January (1), February (2), March (3), and so forth. To do this, you have to set up indexed items in Discoverer Administrator.
That is where I am running into a problem/issue. I am not being able to pick an item and click to look at its properties, scroll down to the Indexed Item property, click on that property, and get a list of items to pick from. On the indexed item property I see a value of <None>, and when I click on that property, no list of items pops up.
I have defined indexed items before, but that was always done on regular folders (imported from the database). In this case, I am working with a custom folder.
The SQL that I have keyed in for this custom folder is this -
SELECT flex_value, description, flex_value_set_id, flex_value_id
FROM fnd_flex_values_vl
WHERE flex_value_set_id = 1011187
ORDER BY flex_value;
FND_FLEX_VALUES_VL is an Oracle view, that combines Oracle tables FND_FLEX_VALUES and FND_FLEX_VALUES_TL.
My goal would be to show both the FLEX_VALUE and the DESCRIPTION in the parameter to the users, so they can better decide what value(s) they want to pick. This is a general ledger application that I am working with, with the General Ledger account number segments and the Flexfield value set for each segment (we are using 7 segments to define our general ledger account number).
Am I not able to define indexed items when working with a custom folder? The documentation is not real clear. It talks about simple folders and complex folders, but does not mention custom folders, at least that I can find. Or perhaps I need to do something different with how I code the SQL for the custom folder to enable me to define indexed items in the custom folder?
Hope this makes some sense. Always a challenge to explain the situation in a clear manner. Thanks for any insight/assistance anyone can give me on this.
John Dickey

Ahh, those picky little details. Once I created an Item Class LOV on my item, then I could click on the Indexed Item property and get the list of fields in the folder to show up and pick my item (to be the indexed item) from that list. I went back to the user guides and the documentation sure does not indicate this requirement. For example, in the Discoverer Administrator guide, you have the section (page 9-30 in the version I have) titled "How to assign an indexed item to an item". Nowhere in that section does it say that you have to create an Item Class LOV first to be able to do this. Though it does show how if you do not have an LOV on the item you pick to be the indexed item, you will be prompted to create an LOV for that item. In the past I had my LOVs created first. This time I was trying to do the indexed item first before creating my LOVs. So lesson learned - you have to create an Item Class LOV first before you can assign an indexed item to an item.
Thanks for the assistance.
John Dickey

Not able to find 'Sales Summary' of a BP in CIC0 transaction

Hi,
We are using CRM 3.0 vesion and not able to find 'Sales Summary' of a BP in CIC0 transaction.
Appriciate any suggests on this.
Regards,
Fedor.

Hi ,
is it open so item or you already done the DO and Billing? , it wont allow to change if you have any sub.documents for that SO.
regards
Prabhu

Not able to attach final signed document in the contract document

Dear Experts,
The upload field for final signed document in the contract document is visible only for the latest/last contract document if there are more than one contract document exist in the Master Agreement.
For the previous contract documents, not able to attach final signed document (i.e) the upload field is invisible.This scenario is occuring only in few master agreements, mostly found in Legacy agreement types.But for newly created legacy agreements this scenario is not occuring.Please help me in finding out why the upload field is visible only for the last/latest and not for the previous ones.

Hi Dinesh,
Did you find a solution to this?
Regards,
NR

In 4.1 BO Client Tools not able to find data source for BVM

Hi All,
In 4.1 BO Client Tools not able to find data source for BVM
Its creating issue .
So if any body have any solution please let me know.
Regards,
Abhishek

java.lang.NoSuchMethodError: org.w3c.dom.Node.getTextContent()Ljava/lang/String;
     at customertree.XmlLoader.readData(XmlLoader.java:127)
     at customertree.XmlLoader.<init>(XmlLoader.java:69)
     at customertree.CustomerTreeFinal.jbInit(CustomerTreeFinal.java:240)
     at customertree.CustomerTreeFinal.init(CustomerTreeFinal.java:858)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source
     at java.lang.Thread.run(Unknown Source)and then inside the code... this is where i get my first error
clients.setRowId(list2.item(i).getTextContent());

Not able to find the created BI System

Hi,
I have configured the BI System as in the document.
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
I am having few doubts.
1. Whether we need to choose only SAP system with load balancing template.
2. Whether we can set
BI Directory Provider: No
BI Master System: No
And also one more thing, I am using UIDPWD logon method. Whether there will any problem with this
I need clarifications on these.
Also after doing all these things i am not able to find the created BI System in VC.
When i test the same in Portal, it is saying the connection is successful..
Anyother step needs to be done, after this in configuration. Please let me know.
Please help me to resolve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 12, 2008 1:41 PM

Hi Inna,
Thanks for the reply.
But in Portal I have done the User Mapping between Portal Server and BI System.
I am using BI 3.5 System, Whether there will be any problem?
The BI Kit is already installed and i am able to view the components.
Still i am not able to get the System that i have created in portal into VC 7.1.
I am only getting Web Services created in that system and Service Registry and Visual Composer Models in Search Tab.
Whether we need to create a RFC destination also for this BI system?
Please help me to solve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 15, 2008 4:44 PM
Edited by: Palani Appan on Sep 16, 2008 9:42 AM

FindClass() not able to find the class in the same path

Hi,
I have a c prototype which calls a java function which push a message in JMS. i'm using jdk1.6. i have set JavaVMInitArgs vm_args.version = JNI_VERSION_1_6 when i compile the c code as gcc -g -lgcj -I $JAVA_HOME/include -I $JAVA_HOME/include/linux CallJMS.c the JNI_CreateJavaVM(&jvm, (void*)&env, &vm_args)* returns JNI_ERR. After changing version to 1.4 JavaVMInitArgs vm_args.version = JNI_VERSION_1_4 finally it gives me an executable which calls the java function (how ever the required functionality is not got)
To get the required functionality i had to use jdk1.6 so i changed the version property to JNI_VERSION_1_6 and the compiling command as gcc -g CallJMS.c -I $JAVA_HOME/include -I $JAVA_HOME/include/linux -L $JAVA_HOME/jre/lib/i386/server -ljvm .This gave me an executable, but when i execute it is not able to find the java class file. I have kept both the java and c file in the same path and also set the CLASSPATH. Please help.

Hi jschell,
I got solution to this problem. As you said it is due to wrong CLASSPATH set .
Before:
JavaVMInitArgs vm_args;
JavaVMOption options[3];
options[0].optionString = "-Djava.class.path=.:/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes";
options[1].optionString="-Djava.library.path=.:/home/program/jdk1.6.0_23/jre/lib/i386/server";
options[2].optionString="-verbose:jni";
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 3;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
I was setting the CLASSPATH to the Path where my java class files were kept. When the JVM instance is created only this path (where my java class is residing) is identified and the JMS and other paths which was already set in the CLASSPATH environment variable is lost. Thus when i call the java class from the c program it is not able to find the dependent class files and it was aborting.
After:
Before setting the path where my class files are residing to CLASSPATH, get the path's in the CLASSPATH to a variable, append the path where my class files are kept to this variable and then set the CLASSPATH . Similarly do for the LD_LIBRARY_PATH. This works fine.
char cpathBuff[100000];
char ldpathBuff[4096];
JNIEnv *env;
JavaVMInitArgs vm_args;
JavaVMOption options[3];
cpath = (char*) getenv("CLASSPATH");
sprintf(cpathBuff,"%s%s:%s","-Djava.class.path=",cpath,"/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes");
options[0].optionString = cpathBuff;
ldpath = (char *)getenv("LD_LIBRARY_PATH");
sprintf(ldpathBuff,"%s%s:%s","-Djava.library.path=",ldpath,"/home/program/jdk1.6.0_23/jre/lib/i386/server");
options[1].optionString = ldpathBuff;
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 2;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
Thanks for your support Peter and JSchell.
Edited by: 844094 on Mar 15, 2011 2:37 AM

11.2.0.3 GI installation is not able to find candidate oracleasm disks

Hi,
I am installaing 11.2.0.3 RAC on Linux. Installed ASM rpms and created oracleasm disks as root user.
#oracleasm listdisks
OCR_VOTE01
OCR_VOTE02
OCR_VOTE03
Now when I started the GI installation as grid user, it is not able to find the candidate disks as given above to enter the location of OCR and VOTING disks.
Does anybody have gone through this type of situation, please help me.
Thanks,
Mahipal

How to configured oracleasm?
Which user and which group given?
What about $ id grid ?
Regards
Mahir M. Quluzade

Not able to find business system

Guys ,
I am not able to find my business system in service without party -> business system in integration directory .

Hi,
did you have a look at this:
Defining a Business System as a Service
http://help.sap.com/saphelp_nw04/helpdata/en/3e/60653f0c9fa075e10000000a114084/content.htm
BTW
but first you must create it in the SLD:
Configuring a Business System
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/content.htm
and if you want to know how to insert a technical system you can take a look at my weblog:
Registering a new technical system in SLD - ABAP based
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
Regards,
michal
Message was edited by: Michal Krawczyk

Not able to fine Create Item column in the Page personalization

Dear All,
I am not able to find the "Create Item" column in OA page personalization. Do we need to set any profile options for this?
Regards,
Joshna.

Hope you have set these profile option.
Personalize Self-Service Defn should also to Yes
Disable Self-service Personal to No
FND%Diagon% to yes
Once you are going for personlization, you would be getting personlize Page link.
Click personlize page link
Select Scope
select complete Radio Button
select Create Item Icon for a region(table)
Thanks

Not able to find final Item in configurator R 12

Similar Messages

Maybe you are looking for