Not able to get file handle

Hi,
First scenario.
I run the following piece of code locally
File file = new File(fileName);
It works fine.
Second Scenario.
This code is put in a jar file and put on a shared drive. The application is started by clicking a bat file on the same shared drive.
File file = new File(fileName);
The code hangs at this point. It neither throws the error nor it moves ahead. The filename is the name of the file stored on the shared drive itself.
Any clues whats going wrong?
-Deepak

jumman007 wrote:
Hi,
First scenario.
I run the following piece of code locally
File file = new File(fileName);
It works fine.
Second Scenario.
This code is put in a jar file and put on a shared drive. The application is started by clicking a bat file on the same shared drive.
File file = new File(fileName);
The code hangs at this point. Unless things have changed recently, I don't think so. You can pretty much put any string you like as the fileName and until you try to use the File it does not actually matter.
It neither throws the error nor it moves ahead. The filename is the name of the file stored on the shared drive itself.
Any clues whats going wrong?
-Deepak

Similar Messages

Sender File Adapter not able to get file via FTP from an external system

Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.

Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael

Not able to get file from application server with read dataset

Hi,
Firstly i download a file from application server from read data set and then i sent this file as attachment. But problem is that i am able to send .jpg .bmp file but i am not able to send .pdf or .doc file so what can i do for that. ?
My code is like below...
DATA : PATH TYPE STRING.
DATA: E_FILE LIKE RLGRAP-FILENAME.
CONCATENATE '/tmp/' NAME_WITH_EXT INTO E_FILE SEPARATED BY SPACE.
CONDENSE E_FILE NO-GAPS.
IF EXTENSION = 'TXT'.
    OPEN DATASET E_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT WITH WINDOWS LINEFEED . " MESSAGE MSG.
    IF SY-SUBRC <> 0.
   WRITE: SY-SUBRC, MSG, ' LIKE ', C_FNAME.
    ELSE.
      WHILE SY-SUBRC = 0.
        READ DATASET E_FILE INTO WA_C.
        IF SY-SUBRC <> 0.
          EXIT.
        ENDIF.
        APPEND WA_C TO IT_C.
      ENDWHILE.
      CLOSE DATASET E_FILE.
    ENDIF.
ELSE.
    OPEN DATASET E_FILE FOR INPUT IN BINARY MODE. " ENCODING DEFAULT. "    INPUT IN BINARY MODE . " TEXT MODE ENCODING   NON-UNICODE.
    IF SY-SUBRC = 0.
      DO .
        READ DATASET E_FILE INTO GS_PDF_TAB.
        IF SY-SUBRC = 0.
          APPEND GS_PDF_TAB TO GT_PDF_TAB.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      CLOSE DATASET E_FILE.
    ENDIF.
ENDIF.
Regards,
Gurprit Bhatia

delete this line DEFAULT WITH WINDOWS LINEFEED and check this..

Not able to get the handle of picklist which exists in the advanced table

Hi all,
I have a pick list called usageName in the advanced table when i am trying handle that picklst it is not giving me the correct value.
The valuess in the pick are
1)MFP Scan
2)MFP B&W,Copy,Scan
3)MFP B&W and Colour
4)Fixed
5)MFP B&W, Colour, Scan and Copy
6)Mono Printing - Per Catridge/Toner
7)Mono Printing - Per Page
to handle the pick list i am using the code as
OAMessageChoiceBean usagenameevent =(OAMessageChoiceBean)webBean.findChildRecursive("UsageName");
usagenameevent.setFireActionForSubmit("xxReasonEvent",null,null,true,true);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Request ","usagenameevent:"+usagenameevent ,1);
String usnmae = pageContext.getParameter("UsageName");
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Request ","usnmae:"+usnmae ,1);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if("xxReasonEvent".equalsIgnoreCase(pageContext.getParameter("event"))||pageContext.getParameter("UsageName")!= null)
OAViewObject vo = (OAViewObject)am.findViewObject("XxwepUsageNameVO");
// usagenameevent.get
// OAApplicationModule am = pageContext.getApplicationModule(webBean);
//OAViewObject vo = (OAViewObject)am.findViewObject("XxwepUsageNameVO");
if(vo != null )
//XxwepUsageNameVORowImpl vo1=(XxwepUsageNameVORowImpl)am.findViewObject("XxwepUsageNameVO");
String usagename = null;
Row row = vo.getCurrentRow();
if( row != null )
usagename = (String)row.getAttribute("UsageName");
if(usagename!=null)
pageContext.putSessionValue("UsagenameParam",usagename);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","usagenamein event:"+usagename ,1);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","row:"+row ,1);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","vo:"+vo ,1);
If i choose any value from the picklist out of those 7 items
Row row = vo.getCurrentRow(); is giving me the last value only
for ex i have choosed
2)MFP B&W,Copy,Scan
but the vo.getCurrent Row is giving me the value as
7)Mono Printing - Per Page
could please let me know what the mistake could be helpful
Thanks
Ajay

Hi,
As stated above if you need to check the message or message properties then you would need to enable tracking, depending on where you want it to be and what you want to track, below are two articles which should help you understand more:
BizTalk Server: Tracking Data Using BizTalk Admin Console
BizTalk Server: Checking Tracked Data Using Admin Console
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server: Multiple XML files to Single FlatFile Using File Adapter

Not able to get the pagebutton bar bean object in the extended controller

Hi All,
I am not able to get the button bean object in my page. But, am not able to get the handle of buttonbar itself. any idea?
Page Structure is:
PageLayout - not having controller
----buttonbar
---button1
---submitbutton2
----regiion1(stack layout)-controller assigned(seededCO)
I am extending the seededCO and I am trying to get the handle of button1 bean with the following code.
OAPageButtonBarBean pbb=(OAPageButtonBarBean)webBean.findIndexedChildRecursive("buttonBar");
if(pbb!=null)
System.out.println("pbb"+pbb);
bb= (OAButtonBean)pbb.findIndexedChildRecursive("button1");
}

Hi,
Try like this,
import oracle.apps.fnd.framework.webui.beans.nav.OAPageButtonBarBean;
import oracle.apps.fnd.framework.webui.beans.nav.OAButtonBean;
OAPageButtonBarBean pBar =
(OAPageButtonBarBean)pageContext.getPageLayoutBean().getPageButtons();
OAButtonBean ctButton =
(OAButtonBean)pBar.findIndexedChildRecursive("YourRequiredButtonName");
Thanks,
With regards,
Kali.
OSSi.

I try to download abode acrobat xi pro from abode download asssistant,it shows download is completed.but iam not able to get thet downloaded file,please help me

i try to download abode acrobat xi pro from abode download asssistant,it shows download is completed.but iam not able to get thet downloaded file,please help me

oatgeo wrote:
I checked the proxy and it should be OK. That's mean I have to try and try again until I get it from the slow servers.
Yes.

Need help with applet servlet communication .. not able to get OutputStream

i am facing problem with applet and servlet communication. i need to send few image files from my applet to the servlet to save those images in DB.
i need help with sending image data to my servlet.
below is my sample program which i am trying.
java source code which i am using in my applet ..
public class Test {
    public static void main(String argv[]) {
        try {
                URL serverURL = new URL("http://localhost:8084/uploadApp/TestServlet");
                URLConnection connection = serverURL.openConnection();
                Intermediate value=new Intermediate();
                value.setUserId("user123");
                connection.setDoInput(true);
                connection.setDoOutput(true);
                connection.setUseCaches(false);
                connection.setDefaultUseCaches(false);
                // Specify the content type that we will send binary data
                connection.setRequestProperty ("Content-Type", "application/octet-stream");
                ObjectOutputStream outputStream = new ObjectOutputStream(connection.getOutputStream());
                outputStream.writeObject(value);
                outputStream.flush();
                outputStream.close();
            } catch (MalformedURLException ex) {
                System.out.println(ex.getMessage());
            } catch (IOException ex) {
                    System.out.println(ex.getMessage());
}servlet code here ..
public class TestServlet extends HttpServlet {
     * Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
     * @param request servlet request
     * @param response servlet response
     * @throws ServletException if a servlet-specific error occurs
     * @throws IOException if an I/O error occurs
    protected void processRequest(HttpServletRequest request, HttpServletResponse response)
            throws ServletException, IOException {
         System.out.println(" in servlet -----------");
        response.setContentType("text/html;charset=UTF-8");
        PrintWriter out = response.getWriter();
        ObjectInputStream inputFromApplet = null;
        Intermediate aStudent = null;
        BufferedReader inTest = null;
        try {
            // get an input stream from the applet
            inputFromApplet = new ObjectInputStream(request.getInputStream());
            // read the serialized object data from applet
            data = (Intermediate) inputFromApplet.readObject();
            System.out.println("userid in servlet -----------"+ data.getUserId());
            inputFromApplet.close();
        } catch (Exception e) {
            e.printStackTrace();
            System.err.println("WARNING! filename.path JNDI not found");
        } finally {
            out.close();
    @Override
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
            throws ServletException, IOException {
        System.out.println(" in foGet -----------");
        processRequest(request, response);
     * Handles the HTTP <code>POST</code> method.
     * @param request servlet request
     * @param response servlet response
     * @throws ServletException if a servlet-specific error occurs
     * @throws IOException if an I/O error occurs
    @Override
    protected void doPost(HttpServletRequest request, HttpServletResponse response)
            throws ServletException, IOException {
        System.out.println(" in doPost -----------");
        processRequest(request, response);
     * Returns a short description of the servlet.
     * @return a String containing servlet description
    @Override
    public String getServletInfo() {
        return "Short description";
    }// </editor-fold>
}the Intermediate class ..
import java.io.Serializable;
public class Intermediate implements Serializable{
String userId;
    public String getUserId() {
        return userId;
    public void setUserId(String userId) {
        this.userId = userId;
}

Hi,
well i am not able to get any value from connection.getOutputStream() and i doubt my applet is not able to hit the servlet. could you review my code and tell me if it has some bug somewhere. and more over i want to know how to send multiple file data from applet to servlet . i want some sample or example if possible.
do share if you have any experience of this sort..
Thanks.

Not able to get the login page after installing 12.1.1

HI,
i am not able to get the login page after installing in the 12.1.1. when i accessed from client machineo.Please help me in fixing out this problem.
Thanks,
venkat.

Hi,
What is the OS?
What is the error message?
Any errors in Apache/Database log files?
Thanks,
Hussein

Not able to get data while executing in background for mb52

Dear all,
my requirement is i want to schedule the zreport for every 1 hour.but proble is when iam executing in fore ground iam able to get data.but when iam going to scheduling this iam not able to get data.
my code is
type-pools:slis.
data zbudat type RANGE OF budat.
data wab like line of zbudat.
data zmatkl type RANGE OF MATKL.
data waz like line of zMATKL.
data zwerks type RANGE OF werks.
data wax like line of zwerks.
waz-sign = 'I'.
waz-low = 'CRUDE'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
waz-sign = 'I'.
waz-low = 'SGO'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
*waz-sign = 'I'.
*waz-low = 'FINES'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'LUMPS'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'UFO'.
*waz-option = 'EQ'.
*append waz to zmatkl.
wax-sign = 'I'.
wax-low = 'BIMI'.
wax-option = 'EQ'.
append wax to zwerks.
clear wax.
wax-sign = 'I'.
wax-low = 'BIPL'.
wax-option = 'EQ'.
append wax to zwerks.
*waz-sign = 'I'.
waz-low = 'C'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'S'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'UC'.
*waz-option = 'CP'.
*append waz to zmatnr.
*waz-sign = 'I'.
waz-low = 'F'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'L'.
*waz-option = 'CP'.
*append waz to zmatnr.
types:begin of w_tab,
       bwkey type werks_d,
       matnr type matnr,
        lgort type LGORT_D,
        budat type budat,
        labst type labst,
       endmenge type p decimals 3,
      end of w_tab.
      DATA : IT_TAB TYPE STANDARD TABLE OF W_TAB WITH HEADER LINE .
FIELD-SYMBOLS: <gt_fieldcat> TYPE slis_fieldcat_alv,
<gt_report_list> TYPE w_tab .
field-symbols <lt_pay_data> type any table.
*FIELD-SYMBOLS : <LT_DATA> LIKE LINE OF IT_TAB .
FIELD-SYMBOLS : <LT_DATA> type any .   " i have chaged it
data lr_pay_data type ref to data.
cl_salv_bs_runtime_info=>set( exporting display = abap_false
metadata = abap_false
data = abap_true ).
****SUBMIT ZQM_GR_BARGE_LOADING WITH S_date in zbudat with s_werks in zwerks with p_pend = ' ' AND RETURN .
submit RM07MLBS with MATKLA in zmatkl with werks in zwerks
"with XVBST = 'X'
using selection-SCREEN '1000' and return.
try.
cl_salv_bs_runtime_info=>get_data_ref( importing r_data = lr_pay_data ).
assign lr_pay_data->* to <lt_pay_data>.
catch cx_salv_bs_sc_runtime_info.
message `Unable to retrieve ALV data` type 'E'.
endtry.
cl_salv_bs_runtime_info=>clear_all( ).
data: obj_s type ref to ZKMINCO_MINESTOCKFROM_SAP_OUT.
create OBJECT obj_s.
data : output TYPE ZKMINMINESTOCKFROM_SAP1 ,
        record type ZKMINMINESTOCKFROM_SAP_REC_TAB ,
       wa_record like line of record.
LOOP AT <lt_pay_data> ASSIGNING <LT_DATA>.
MOVE-CORRESPONDING <LT_DATA> TO IT_TAB .
APPEND IT_TAB .
wa_record-STOCK_AS_ON_DATE = sy-datum .
wa_record-STOCK_AS_ON_TIME = sy-uzeit .
wa_record-PLANT_ID = it_tab-bwkey.
wa_record-STORAGE_LOC_ID = it_tab-lgort .
wa_record-MATERIAL = it_tab-matnr .
wa_record-STOCK_QTY = it_tab-labst.
append wa_record to record.
clear wa_record.
endloop.
output-MINESTOCKFROM_SAP-record = record .
CALL METHOD obj_s->MINESTOCKFROM_SAP_OUT
EXPORTING
    output = output .
commit work.
Thanks in advance.

Hi,
I assume that in your case you have two program lets say ZFOREGROUND and ZBACKGROUND (Called inside zforeground using submit statement)
zforeground has :
1. a input field to browse excel sheet or some file at the selection screen, and
2. button 'post all' to determine the background processing.
Now your requirement is such that you want zbackground to get scheduled as background job when post all button is clicked.
So, within the event AT USER-Command, check the sy-ucomm as that of post all button, if so write the following code to schedule the job:
DATA: jobname LIKE tbtcjob-jobname.
DATA :jobcount LIKE tbtcjob-jobcount,
host LIKE msxxlist-host.
DATA: BEGIN OF starttime.
INCLUDE STRUCTURE tbtcstrt.
DATA: END OF starttime.
DATA: starttimeimmediate LIKE btch0000-char1.
DATA: gv_job_dt TYPE sy-datum,
gv_job_tm TYPE sy-uzeit.
jobname = 'EXCLUSION_LISTING'.
gv_job_dt = sy-datum.
gv_job_tm = sy-uzeit.
Job open
CALL FUNCTION 'JOB_OPEN'
EXPORTING
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
IF sy-subrc NE 0.
"error processing
ENDIF.
Insert process into job
SUBMIT ZBACKGROUND AND RETURN
WITH p_file1 = gv_file_cust_exc "<----
Parameters which you want to pass to report zbackground from the report
WITH p_file2 = gv_file_win_deal "------zforeground
USER sy-uname
VIA JOB jobname
NUMBER jobcount.
IF sy-subrc ne 0.
"error processing
ENDIF.
Close job
starttime-sdlstrtdt = gv_job_dt.
starttime-sdlstrttm = gv_job_tm.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
EXCEPTIONS
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
OTHERS = 99.
IF sy-subrc EQ 0.
WRITE:/1 'JOB' COLOR 3,
jobname COLOR COL_GROUP,
'Scheduled in Background' COLOR 3. "error processing
gv_time = starttime-sdlstrttm.
gv_date = starttime-sdlstrtdt.
ENDIF.
Above code will schedule the report zbackground in background.
Note:
the program schduled in background will not be able to access any data present on your presentation server. data should be provided either by the program schhedulling it in foreground or it has to be thr in application server.
Regards,
Ravi

JAXB: not able to get Attribute value

Hi there,
I am using oracle JAXB for XML processing. I am not able to get the value of an attribute. I ran the same code in SUN JWSDP 1.3, which worked correctly. I am not able to get the "foo" attribute for <Table> element using oracle JAXB.
The XML schema follows:
<?xml version='1.0' encoding='UTF-8' ?>
<schema targetNamespace="http://www.oracle.com/iAS/aggregator"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:jaxb="http://java.sun.com/xml/ns/jaxb"
xmlns:ag="http://www.oracle.com/iAS/aggregator"
xmlns="http://www.w3.org/2001/XMLSchema"
jaxb:version="1.0"
elementFormDefault="qualified">
<annotation>
<appinfo>
<jaxb:globalBindings fixedAttributeAsConstantProperty="true"
/>
<jaxb:schemaBindings>
<jaxb:package name="oracle.dms.aggregator.adml"/>
</jaxb:schemaBindings>
</appinfo>
</annotation>
<complexType name="Adml_T">
<sequence>
<element name="Table" type="ag:Table_T" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
<attribute name="Version" type="token" fixed="10.1.3"/>
</complexType> 
<complexType name="Table_T">
<attribute name="foo" type="Name"/>
</complexType> 
<element name="Adml" type="ag:Adml_T"/>
</schema>
The XML file is:
<?xml version='1.0' encoding='UTF-8' ?>
<Adml xmlns="http://www.oracle.com/iAS/aggregator">
<Table foo="foosailor">
</Table>
</Adml>
The java file is:
import javax.xml.bind.JAXBContext;
import javax.xml.bind.Unmarshaller;
import java.io.File;
import java.util.List;
import java.util.Iterator;
import oracle.dms.aggregator.adml.Adml;
import oracle.dms.aggregator.adml.TableT;
public class JaxbQA
public static void main (String[] args)
throws Exception
Adml adml;
String fileName = "aggregator.xml";
String instancePath = "oracle.dms.aggregator.adml";
JAXBContext jc = JAXBContext.newInstance(instancePath);
Unmarshaller u = jc.createUnmarshaller();
u.setValidating(true);
Object obj = u.unmarshal(new File(fileName));
adml = (Adml)obj;
List tables = adml.getTable();
for (Iterator iter = tables.iterator();
iter.hasNext();)
TableT admlTable = (TableT)iter.next();
String name = admlTable.getFoo();
System.err.println("table foo=" + name);
c:\oracle\jdk\bin\java.exe -classpath .;c:\oracle\xdk\lib\xmlparserv2.jar;c:\oracle\xdk\lib\xml.jar JaxbQA
table foo=null

I tested in both 10.1.0.2.0 and 10.1.0.3, which both showed the same problem. A bug #3621204 has been filed.

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

Not Able to get to the values from applet while designing from xml

Hi All,
I have a new problem, and i am new to this one.
Like I have an XML file.Where in i am able to design the applet while getting the values from the xml and i am able to store also.
But the problem comes over here.I have given out a type field in xml.By validating the type field i am able to get Label(),TextField(),etc.,( whatever it is).While displaying i am giving only one single TextField in the init method and i am looping it up.so that i can get the no of text fields ,labels,text areas,etc.,
so problem comes here.I am not able to get the values from those text fields.(only i am getting the last value.Last value is overwriting the old values.Now i am able to get the last value that i am giving it lastly.)
So please can anyone give me some idea.As it is urgent to me and i have to submit urgently.
Please help me out.And Thanks In Advance.

Here is the sample code while designing the applet:
String type = (String) typeList.get(j);
                         String option = (String) optionList.get(j);
                         if(type.equals("text")){
                              txtdisp = new TextField(15);
                              leadcomp.add(txtdisp);
//                              txtdisp.addMouseMotionListener(this);}

I'm not able to get my mac os 10.6.8 to print to a Savin C2525, any suggestions?

I'm not able to get my Mac OS 10.6.8 to print to a Savin C2525. I've loaded the drivers and after checking for updates and tried to add the printer. The 1st time I tried, it started printing and I could see the file name on the first page, after it printed some type unknown to me, it was blank page after page until I had to literally unplug the printer to get it to stop. I deleted the printer and tried to reinstall and now it is pausing and saying unable to find the printer.....
Any suggestions?

Try later. I just checked mine and got Software's up to date.

HT5887 I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

I have tried all sorts of Settings but just doesnt seem to work one way. I keep getting messages "Airdrop cancelled".

Not able to get the data in COSB Table

Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
Nitin

Hi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin

Not able to get file handle

Similar Messages

Maybe you are looking for