Not getting field value in Input field of field exit

Hi all
I am using field exit for data element GWLDT in transaction code IE02. But in this field exit I am not getting the value entered in the field "Begin guarantee date(GWLDT)" in the INPUT field of field exit.How I can get the value in the INPUT field of field exit?
Regards
Deepak

Use this statement in source code.
output = input.

Similar Messages

TS1398 my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

WiFi Troublshooting
iOS: Troubleshooting Wi-Fi networks and connections
Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199

Object - MLST_NETW container not getting the values?

Hi,
I created a custom FM for the object - MLST_NETW and event STARTED
and in the workflow container I created Element for this object - by selecting Obect type - MLST_NETW
Now the problem is - When we do status change in tcode - CJ20N it is triggering the custom worklfow but in the worklfow container it is not getting any values. Container fields are empty. I need to get the project defination field value to the workflow.
Can any one tell me what could be wrong?
Thanks in advance.
M.

Hi Murali,
Yes. Binding for event to workflow not defined.
For that, press Ctrl + F8 in the workflow template then it will take you to verision dependent tab. There you can find the start events tab.
Here only you entered the Business object and event. Right? So there one button is there for binding. CLick on it and check whether event to workflow binding has done or not.
Event container EVT_OBJTYPE should binded with your workflow business object.
Thanks.

Not getting any value in my method

Hi,
        I wnat to use attributes value Company code in my custom method in the BUS ZZBUS2081 . company code is key field of another BUS BUS0002. For that I am using swc_get_element CONTAINER 'CompanyCode' COMPANYCODE. but when I am executing BUS zzbus2081,attributes value is populated but i am not getting this value in my custom method. please help.

You can try to do some thing like this
1. First if you want to access the key element of the BOR then first import the instantiated BOR from which you want to access the attributes.
In your case it is BUS0002
DATA:    lv_obj    type swc_object.
swc_get_element container '<name of the instantiated BOR>' lv_obj.
2.once you have the instantited bor element in the Mehtod then make use of the macro
SWC_GET_PROPERTY
please check the below snippet
swc_get_element container     '_Workitem'          lv_wi_object.
swc_get_property lv_wi_object 'Workitemid'         lv_wiid.

OWHS table not getting any value in PLD

I am trying to make a pld in which i want to pull the database table owhs and place the warehouse address i am not getting any value in the PLD however there is adress in the ware house field still its not getting me any result
Please help
Regards,
manish

Hi Manish....
Even if you get the OWHS table you wont get the address format as you desire. That is complete concatenated address. It will be like city, street, country like that.....
Regards,
Rahul

State machine custom task workflow how to pass one task field value to the next task field

i am using ItemMetadata.xml to pass value from list to custom task first value its passing the but second value is showing as null
plus how to pass one custom task value to the next custom task
i.e one supervisor approver comments submitted field i want to see on department manager approval custom task which is the next approver from supervisor
ows_firstfield=""
ows_SecondField=""
the above ows fields are from list
in this i am unable to retrive the second value in the task form this is my first query?
second query is that how can we pass one task field value to next approver task field value?
any idea
MCTS,ITIL

What type of workflow is this? IS this Visual Studio or SharePOint designer or third party (K2, Nintex, etc...)? YOu should be able to get ahold of the task that was edited via the correlation token, and then grab any value you want from that
task (wether it be a custom field or a standard worfklow task field).
It would help to know what you are using to build the workflow.
Thanks!

JPA Error:Could not get a value to be injected from the factory

HI friends ,
I am trying to replicate the example JPAEXample01 using JPA in CE1 from the blogs written by
Sabine Heider/Adrian Görler.
During the testing of the method create employee i am getting the following error.
"Could not get a value to be injected from the factory."
I tried couple of examples using the above process, still held up with same error.
Any pointers to trouble shoot this ?
Thanks in advance
Chandra Dasari

HI Isaias Cristiano Barroso,
There are lot of enries most of them pertaining to properties set to yes or no.
out of which therre are tow errors. the log is as follows
Message Info: Failed (javax.management.MBeanPermission,#[:j2eeType=trace,name=EndToEndCentralMBean,],isActive,getGuidByName,getTraceLevelByName,getTraceLevelByName,importTrace,isFileExistsLocally,removeTraceFile)java.lang.reflect.InvocationTargetException
Failed (javax.management.MBeanPermission,*,DISPLAY)java.lang.reflect.InvocationTargetException
category: com.sap.security.core.role.PermissionData
Location:com.sap.security.core.role.PermissionData.get(ClassLoader)
Frankly the above log is above my understanding ,Prob it may help to you undertand my the issue
Thanks once again

JAPEXample01 published in sdn:error Could not get a value to be injected

HI friends ,
I am trying to replicate the example JPAEXample01 using JPA in CE1 from the blogs written by
Sabine Heider/Adrian Görler.
During the testing of the method create employee i am getting the following error.
"Could not get a value to be injected from the factory."
I tried couple of examples using the above process, still held up with same error.
Any pointers to trouble shoot this ?
Thanks in advance
Chandra Dasari.

HI Pritya Ranjan,
Let me know the entities and their relations ships you are using for quicker response.
To know the proper error, use the path as mentioned
nwa->problem management ->logs & traces->locks.
Email the error code,
The issue might be because of some many probabilities mentioned below.
Point no 1
Are you using Named queries : If so check the queries syntax, the syntax used here is different from regulat sql queries.
Point no 2:
Are you using Java DIctionary or generic db and connecting to max db?
check this part also
Point no 3:
Check your connection profile parameters:
Point no 4 :
Check the data-source-alias,persistence.xml and data-source.xml parameters..
Beacuse i trouble shooted a lot on JPA's and found why the typical error's occurs.
Regards
chandra dasari

I can not get link-value from af:tree.

Hello.
I use jdeveloper 10g.
I can not get link-value from tree.
I use following code:
<f:facet name="nodeStamp">
<h:panelGroup binding="#{backing_dialogDic_dic_ETS.panelGroup1}"
id="panelGroup1">
<h:outputText value="#{item.vidNum} #{item.vidName}"
binding="#{backing_dialogDic_dic_ETS.outputText1}"
id="outputText1"/>
<af:commandLink
binding="#{backing_dialogDic_dic_ETS.commandLink2}"
id="commandLink2"
action="#{backing_dialogDic_dic_ETS.returnObject}">
<af:setActionListener from="#{item.idVid}"
to="#{processScope.ETSId}"/>
<af:objectImage source="/images/icons/10.gif"
shortDesc="Выбрать"
binding="#{backing_dialogDic_dic_ETS.objectImage2}"
id="objectImage2"/>
</af:commandLink>
</h:panelGroup>
</f:facet>
</af:tree>
//in java bean:
public String return_Object() {
Object ob = JSFUtils.getManagedBeanValue("processScope.ETSId");
System.out.println(o);
return null;
In console I see null.
How I get this value???
I can get this value if i use treeTable instead of tree.
Thx, Dema.

Hi,
not that I think it matters, but the processScope is not a managed bean but a memory scope. So if
JSFUtils.getManagedBeanValue("processScope.ETSId");
assumes a managed bean then this may be incorrect as most likely there exist no managed bean with this name. You should be able to access the process scope from AdfFacesContext.getProcessScope(), which then returns a Map, which you call get("ETSId") on
Frank

How to get the value of an jbo:InputSelectLOV field

I am trying to get the value that was picked by the user by jbo:InputSelectLOV field. The value just set by this is required for another field. The only way I can do this is by doing a commit every time the user picks a value. Any suggestions?. Note:I tried Jbo:PostChanges, it did not work.
Here is the code snippet. The first Lov gets the value for LocationId. Contacts has LocationId as the foreign key, and I need this to pick ContactId.
<tr>
<td>Customerlocation</td>
<td>
<jbo:InputSelectLOV datasource="ds" dataitem="Customerlocationid"
displaydatasource="CL" displaydataitem="Locationtype,Address1,Address2,City,State,Zip,Locationid"
displayvaluedataitem="Locationid" formname="WorkfilesView_form"/>
</td>
</tr>
<tr>
<td>CustomerContactid</td>
<td>
<jbo:InputSelectLOV datasource="ds" dataitem="Customercontactid"
displaydatasource="CC" displaydataitem="Contacttype,Contactinfo,Locationid,Contactid"
displayvaluedataitem="Contactid" formname="WorkfilesView_form"/>
</td>
</tr>

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Charles (JDev team) ([email protected]):
You can't do it right away, you have to submit first.
When you return from the first lov, the locationId value is set the form input field but not to the datasource yet, which is what you need to be able to see it in the second lov.
You need to submit the change immediately after the first lov is done and then forward to the same page.<HR></BLOCKQUOTE>
Charles:
Two questions:
1. How to call the editSubmit.jsp automatically after the value is "picked". Right now I have a kludgy "Click Here" link which calls editSubmit.jsp
2. I tried jbo:postchanges with out success. I have to commit to see the changes. Is this the right?.
null

Retain all form field values after input text field validation failure

Hi,
I have a form with 1 input text field, one Command button and one h:selectManyListbox. when User enteres some values in input field and clicks on command button named Add, the value is validated. If input is invalid, then an error message appears next to the field. If input is valid, then the value is added into h:selectManyListbox. Adding to list box is done using Ajax4Jsf.
Probelm:
Let's assume user entered 3 valid values one after another and all are added into the list box. When he enters a wrong value, and error message appears. however, the entered values in list box goes away. Is there a way to retain the values even after validation failure.
Code is given below;
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t"%>
<%@ taglib uri="http://richfaces.org/rich" prefix="rich"%>
<%@ taglib uri="http://richfaces.org/a4j" prefix="a4j"%>
<h:panelGroup>
     <h:outputLabel for="inputEmailId1" value="Email Id: " />
     <t:inputText value="#{bean.newEmailId}" id="inputEmailId1" maxlength="100" size="40" immediate="true">
          <t:validateEmail message="Enter a valid Email Id." />
     </t:inputText>
     <t:message for="inputEmailId1" styleClass="errorStyleClass" />
</h:panelGroup>
<t:panelGroup style="text-align: left;" >
     <a4j:commandButton value="Add" styleClass="buttonsSub" action="#{bean.addSharedEmails}"
          reRender="inputEmailId1, selectedSharedEmails" />
</t:panelGroup>
<t:panelGroup style="text-align: left;">
     <h:selectManyListbox id="selectedSharedEmails" size="8" style="width:100%;" immediate="true">
          <f:selectItems value="#{bean.sharedEmails}" />
     </h:selectManyListbox>
</t:panelGroup>
Thanks in advance,

Use the attribute "binding" instead of a "value". This will remember the value. You can also make sure that you dont have anything in your constructor or class level that initialises that value to "" or null. Because if JSF is remembering your value but your initialization that gets triggered before the page loading resets it to default values then you need to change that part of the code.

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

How to get the values for the Authorization Object Fields....

Hi Everyone,
I'm pretty new to the SAP Security and have been working on the Basis sides...I created a new role in PFCG and added a few transactions (ME13) and clicked on the Authorizations tab. In there, the authorization tree is in yellow and red. After providing the Org Values, only the yellow lights remain (apart from the green one ofcourse). Now how do we get the values for the different auth obj fields that are in yellow... say for example
Conditions                                                   COND
Maintain Condition: Auth. for Use/Appl./Cond.Type/Table      V_KOND_VEA
Activity                       03                                                                        ACTVT
Application                                                                                KAPPL
Condition table                                                                                KOTABNR
Condition Type                                                                                KSCHL
Usage of the condition table                                                                 KVEWE
Here the values for V_KOND_VEA fields e.g. KAPPL, KOTABNR etc are missing.
My question is how do we get these values in regard to the requirement provided by the client...is it the functional guys who provide these values or else how is a security person supposed to know it...
All the help in this regard is sincerely appreciated along with the awarding of points...

Hey thanks Alex and Catastrophe for the quick response...
I'll be sitting with the functional team and reviewing the roles created.
Thanks for all the help once more
Regards,
Akash.

Setting default field values for multi-line text fields in lists?

For the multiple lines of text field in a list, I'm using SharePoint Designer 2013 to set a default
value for the field, but I need that default value to include rich text formatting (the default value includes a formatted table). Is this possible without having to delve into JavaScript? And if so, how?

Yes, we can :)
You can do it with powershell
$web = get-spweb <yourweb>
$list = $web.lists["<yourList>"]
$field = $list.fields["<yourField>"]
$field.DefaultValue = "place your html code here"
$field.update()
hope that helps

How to assign custom tab field value to corresponding standard tab field value.

Dear friends,
I want assign a field value ( advice code , advice code description ) in a custom tab to corresponding field value in standard tab (advcode ,). in me51n.
following screen shot are given below

Hi SK,
It looks both the tabs are custom ones. In that case, you can either use Export/Import statement or you can use Set/Get Parameter ID for setting value.
If one is standard subscreen, you can export value from custom subscreen and use line item level user-ext/enhancement to assign the value on standard subscreen.
Hope this helps.
Regards,
Naveen

Not getting field value in Input field of field exit

Similar Messages

Maybe you are looking for