Note to the CC Community

1) my previous post was not an attempt to "escalate a solution" - it was intended as joke among long-time acquaintances. The matter in question is not "urgent" or critical and therefore needed no immediate solution
2) there was no intent to "report a bug" - I personally don't consider the situation a "bug". I can easily understand a delay in SE16n refresh - the interesting and relevant question is why SE11 is not similarly delayed.
djh

Hi Blag - thanks for the kind words.
Regarding controversy:
There's no enough controversy on SCN without you
my attitudes toward it were shaped by my main academic mentor (Ray Dougherty/NYU).
First, he introduced me to a great bit of British understatement usually attributed to Bertrand Russell:
When the experts are agreed, the opposite opinion cannot be held to be certain ...
Second, he gave me two additional observations which have never failed to be true over the years, at least not in my personal experience... I call them "Dougherty's Rules of Rhetorical Engagement"):
1. If you make people think they're thinking, they'll love you. But if you make them really think, they'll hate you.
2. If you tell people they've merely made a mistake, they'll usually be grateful rather than annoyed. But if you tell folks their position on something is fundamentally misconceived, they will never forgive you.
Best
djh

Similar Messages

The message is not reaching the outgoing communication channel

hi forum help..............
i have a IDOC-XI--JDBC scenario...
my xi receives an idoc from a sap ecc.....does a simple mapping to a jdbc structuuure and then writes to a databse....
it was working fine..... but now i had to change the JDBC adapter configuration..means in the integration builder(configuration).. i changed the name of my database server.....
now after making that change ....... the message is not reaching the outgoing communication channel....
i cant see any error in the sxmb_moni....
but there is no log for the message processing in the communication channel in the RWB............

hi,
Is the Database is running on the same server and the same tables and all are existed with same structure.
Database name is changed then you would have to check all . and after changes , did you activated ?
If every thing is correct, then refresh Cache.
For cache related see the below links
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla

Why apple does not help the scientific community?

I see that everybody are asking the same question about the ability of writing superscript or subscript in word processors on ipad.
The real question should be why such an expensive device does not meet the student and specially the scientific community. None of the program's used in ipad supports these most important features for any student. And I thin the reason would be the so itself since none of the program's have this feature. Therefore everyone just have to come up with different tricks to do the job that it should be so easy.

You are not talking to Apple here, just users.
Tell them here
http://www.apple.com/feedback/ipad.html

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

TS3230 i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?

i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?

You need to uninstall the Community / Conduit toolbar add-on.
Locate the files in bold print and move them to the Trash. The first five are in your root /Library
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/ScriptingAddtions (anything CTLoader realted)
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
The next one is in your Home folder.
~/Library/Application Support/Conduit
When you're done, try Safari.

I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank you

See this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4? Thank you

Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4?
Thank you.

Not sure what CCS has that you’re referring to, but TCS5 is out and can be installed via subscription or downloaded installer.

"Could Not Open the Communication Device" ???

I use a dial up connection. Everytime I try to connect to the internet, after it dials a message box pops up that says "Could Not Open the Communication Device". Has anyone else had this problem? And how do I fix it?
Please help me.

I found this in Mac Help:
If you haven't entered your network settings, open Network preferences, choose your modem port (internal or external) from the Show pop-up menu, and enter the settings provided by your ISP, such as the access phone number, your user name, and your password.
You can also use the Network Setup Assistant to help you enter network settings. Click "Assist me" in the Network pane of System Preferences and follow the onscreen instructions.
Also verify that the number you are dialing is correct.
Try this too.
Some ISPs may require a PPP connection terminal script to connect to the Internet using a modem. If it is required, contact your ISP for the terminal script
To use a PPP connection terminal script follow these steps:
In the Finder, navigate to the Library folder on your startup disk.
If the Library folder does not contain a Terminal Scripts folder, you will need to create it. Choose File menu > New Folder, and name the new folder "Terminal Scripts."
Copy the terminal script file from your ISP to the Terminal Scripts folder.
To activate the terminal script, choose Apple menu > System Preferences.
Click Network and choose your modem port (internal or external) from the Show pop-up menu.
Select the PPP tab and click the PPP Options button.
Choose your connection script from the Terminal Script pop-up.
Click OK and then click Apply Now.
If the Terminal Script pop-up menu is dimmed, then the script is not being recognized. Check that the script is valid, and it is installed in the correct location.
-Internet Wiz

Getting "Internet Connect Could not open the communication device"

I am getting a pop up showing "Internet Connect - Could not open the communication device."
Why is this? I have never got it before and after awhile my internet works just fine. I am trying to understand why it's popping up. The wireless networks I connect to are always working fine but my computer is just now giving me this pop up.
Please help. Thank you.
-Mike

you could try moving either file one at a time, don't delete them though
if moving the files and restarting does not fix the problem you can always put them back to the original location, it's just settings files
possibly you'd need to setup your network prefernces again
also, in System Preferences, click on Accounts pane, then your user name (you may need a password for that)
on the right side of the Accounts window there is "Login Items" tab, see if anything shows up in login items
as a guess, machine tries to connect by looking for your cell phone to use as a modem or something
maybe check Network preference pane, see what shows up in Bluetooth

BD Lookup Error _ Not using the COmmunication channel!

Dear all,
I Tried to do DB Lookup as told in this blog by siva
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
I used the below code.
I am not Getting any error, the mapping is successfully ACTIVATED. But in the Receiver field i am Getting Null as output , the DB lookup which i have mentioned is not connecting to the Database and executing and fetching the query. Just inthe receiver field its througing the Null valuse. The Required Value is not fetched by using the communication channel.
I am getting the above error when i try to TEST THE MAPPING in IR.
Below is the code i used.
SERVER:XI 3.0
SP:18
RECEIVER DATABSE: MSQL SERVER 2000
CODE----
//write your code here
String Query = "";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = "Select cir_id from circle where cir_sap = 'IDBL'";
try{
channel = LookupService.getChannel("<Business Service/System Name>","JDBC_channel_receiver Communication channel");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("cir_id"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!= null) accessor.close();
catch(Exception ex){
result.addValue(ex.getMessage());
END CODE----
Please help me out.
I am getting output as null. But in database value is there for cir_id where cir_sap='IDBL'.
Regards,
Prakash

As i told before i have tested the interface, its not showing any error, its Activated and throwing Null as output.
Its not fetching the value from database. In CC Monitoring also the adapter is in Green Status. No error over there. Its throwing the output as Null (Default value in the code.)
Below is the connection parameter i have used:
DRIVER:com.microsoft.jdbc.sqlserver.SQLServerDriver
CONNECTION : jdbc:microsoft:sqlserver://<IP>:1433;DatabaseName=test_db
But in the blog
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
If u can see properly, he has mentioed some extra parameters in the JDBC Connection Parameters.
But the screenshot is not proper so i am not able to see the querry he has used in Connection parameters.
Please help
Could anyone tell how to write the Select statement in Connection Parameter for Adapter as given (Partialy in screenshot in BLOG)?
Regards,
Prakash
Edited by: senthilprakash selvaraj on Jul 1, 2008 7:33 AM

Communicator 9300i will not display the Blackberry...

I have Communication 9300i which I have installed the Blackberry Connect software on to but it does not display the Blackberry serivce in the messaging section.
I have unistalled the software a couple of times and reinstalled it, but to no avail.
Any advice please.

I figured out that the score editor is very unstable. When I open the score editor, and it shows the notes for the region I clicked on, I now know to be sure to only click on the white, lit area of the stave to increase the view to either multiples of the same region, or the full score. If I click on the gray area, then the whole thing goes black and "create a MIDI region" appears, and the score editor will no longer come back. Also, do not ever click on a region when the score editor is open, or the whole thing goes black again.
The score editor is very unstable, and must be opened and closed with care. Once the "create a MIDI region" prompt comes up, it is impossible to get the score editor to open again, unless you open the specific score editor window, but that will not display the full score.

Deployed DC's not appearing on the Application Communication: Configuration

whenever i deploy any WD UI DC on the portal via NWDS , i am able to successfully deploy the DC.
However i am not able to view any of my DC's on the the Application Communication: Confirguration in NWA.
i have to assign the provider systems for the DCs, so i would require the DCs to appear.
i am currently operating on CE7.2
please help in this regard.

Hi Ashwin ,
While importing the service into your web dynpro you will be asked to create a new service group or use existing. If you have not selected both while importing the service the DC will not be available in the application communication as there is no service group present for that DC. So you can once again check whether a Service Group is created or not. Hope this helps.
Regards,
Rohit

I keep getting an error message that says the safari browser version you are currently using does not support the community toolbar. how do I fix it?

Everytime I open my imac I get an error message that says: "We're sorry but the Safari browser version your are currently using does not support the community toolbar." I can't see where it affects anything else, but getting an error message on an imac, just doesn't seem right, ya know? How can I get rid of the message.

Apparently an add-on named Community Toolbar was installed at one time, and is causing the problem. To get rid of it, quit Safari, then throw away these files -
Macintosh HD/Library/Application Support/Conduit
Macintosh HD/Library/InputManagers/CTLoader
Macintosh HD/Library/Receipts/ctloader.pkg
Macintosh HD/Library/Receipts/<Toolbar name>.pkg
Macintosh HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
Macintosh HD/Users/<User name>/Library/Application Support/Conduit
Note - if you are using Lion, the Library folder in your home folder (user name folder) is hidden. To get into it, in Finder open the Go menu; with that menu open, press and hold the Option key. An item "Library" will be added to the list, and can then be selected. That will open the Library folder in your home folder.

VS 2013 Community Edition lost its license: SP324098: Your browser could not complete the operation.

I have installed Visual Studio 2013 Community Edition on a brand new Windows 7 machine and registered with a new Microsoft account. This was for testing purpose to see how well the new Community Edition would work in comparison to the Professional Edition.
At first, everything looked good.
Didn't use it in a while now, and just came back to see that it's complaining about a license. What a warm welcome. It gave me a link to "renew" the license and I clicked it. It opened that pre-login window, then came back and said this:
SP324098: Your browser could not complete the operation.
That's all. Every single time I retry. What does it even mean? I don't want my browser (IE11 by the way) to do anything, I just want that license to use my free Visual Studio edition. Is it not free after all, was it just a trial that has now expired? I
mean, why should I get a 1500$ application for free... That just doesn't sound real.
Anyway, can somebody tell me what went wrong and whether/how it can be fixed?

Okay, something's badly broken here in my region. I took an older VM with Windows 8.1 and an installed VS 2013 (from MSDN, with licence), uninstalled VS 2013, installed all Windows updates, and then installed the VS 2015 CTP 5. It has installed fine, but
at the first start, it says:
Sorry, we ran into a problem.
SP324098: Your browser could not complete the operation.
At least I can ignore the problem and continue in this case. After starting, under "Register product", it first said "licence expires in 14 days" and I was logged in with my primary account. Must have been from the previous installation.
The error code appeared here as well. After logging out and registering again, it seems to work. And my default browser here is Chrome and I never took special care about IE. In VS 2013 CE, however, I don't even get the login form.
So this is an entirely different machine, it has never seen a community edition of Visual Studio nor the separate account I used for it. Yet it failed with the very same error message. What the heck does that error code even mean and what is the real cause
of it?? Can you please tell me the truth about it? I don't want to chase symptoms or try every guess somebody might have (retry, restart, reinstall) – that leads us nowhere. This error appears for a reason, I hope, and somebody must be able to find that out.
(If not, I'm really wondering what Microsoft engineers do and whether they know their product.)
If this doesn't improve, I honestly and urgently suggest you drop this broken licensing implementation and replace it by what there was before (i.e. product key or nothing at all) or use another proven technology. This thing just isn't stable or reliable
and will cause trouble.

SP324099: Could not complete the operation - Can not login to update VS2013 community license

I need to update my vs2013 community license.
I go to help / register product and then I fill out the form with my windows life info and get this message:
SP324099: Could not complete the operation
IE also opens up to a url that has this:
res://ieframe.dll/dnserrordiagoff.htm -#https://app.vssps.visualstudio.com/_signedin?realm=app.vssps.visualstudio.com&protocol=javascriptnotify&mode=profile&cache_key=MpmrmitkkD%2FA4WkL2wR8RCxxi6lHNmj5p3MUYOpdzQw%3D
I've also tried the ipconfig /flushdns command and I can't find the VSWinExpress.exe /resetuserdata command.
Can anyone tell me what else to do??
Thanks.

Hi zoropell,
>>I need to update my vs2013 community license.
Didn't you register VS2013 Community before?
As far as I know, we can use VS2013 Community without sign in for several days. Can you use it now? Was it expired? If you can still use it, please check if VS works fine except for registering it. If you find that you can't create projects
or you can't build the projects fine, I'm afraid that you need to repair VS because I guess VS wasn't installed ok.
Your update is welcome.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Note to the CC Community

Similar Messages

Maybe you are looking for