Notification exit/badi add button
Dear all expert,
I have the requirement to add one button at notification header. after click system will show the selection list that read from cuztomize table after user select the value will fill into the cause text field at notification header.
Do we have any exit or badi that can use for this requirement?
Thank you very much.
Konnapa
Konnapa,
You should be able to accomplish this using user exit
1) QQMA0001 User sub screen for notification header: To identify the custom field associated to this order and also to identify the associated header code.The other option would be use the Action box functionality to accomplish the similar functionality.
2) QQMA0014 Checks before saving notification: To transfer the custom field to the header code.
However you will not be able to use this or other user exit to have a Button on the application tool bar or the notification.
Regards
Narasimhan
Similar Messages
-
hi all,
can we add button to std sap without add screen exit through badi?
ThanksHI, Yes you can add.. for that you have to find out the proper BADI.
Thanks,
Prasanna -
User exit / BADI to add the condition type in PO
Hi Friends,
The scenario is like user will be creating the Sales order & after that user will create the PR & immidiately after that PO will be created from PR no.
I will be checking for some Z* condition type in sales order & if its present in sales order I have to add that condition type in PO.
So for this I am searching for user exit or BADI.
Please help me out with this.
I have already tried following user exits & bADIs
1. RV61AFZA - cant use because i dont get the PR no or SO no in this exit.
2. RV61AFZB - cant use because i dont get the PR no or SO no in this exit.
3. also tried the enhancement MM06E004 - if I add new condition type in XKOMV table condition type is not getting updated in PO.
4. MM06E005 - if I add new condition type in XKOMV table condition type is not getting updated in PO.
5. ME_PURCHDOC_POSTED - this BADI dont allow us to add the new condition type to std internal table.
If you know anything apart from this then please do let me know.
Full points will be awarded for the correct answer!!
Best Regards,
Aditya
Edited by: aditya aghor on May 26, 2008 8:59 AM
Edited by: aditya aghor on May 26, 2008 10:33 AMTransaction Code - MIRO Enter Invoice
Exit Name Description
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
kevin -
How to "Add" Button to upload file in Notification PG?
I have a question on Extending/Customizing notfn to have "Add" attachment button to upload a document (some stnd template that Our business has) on either NotifDetailsPG or /oracle/apps/fnd/wf/worklist/webui/MoreInfoPG when a Approver opens notification to APPROVE/Reject
I'm wondering why Oracle didn't provide this feature of Uploading a file (along with Response input text area that they provided already) in NotifDetailsPG?
Business Reason: Our Business wants to upload a doc when an approver Rejects the notification (our case: iExpense module filing Exp Report) telling employee to follow some protocals
Question on OAF:
Is it possible to extend NotifDetailsPG or MoreInfoPG to upload a file. So, that when it goes to requestor they can open this file back and read thru. I know we need to insert a record in fnd_documents and fnd_attached_documents and /or fnd_lobs...but i don't know how to retrieve it back....Any hints....
Thanks
Raghu Kulkarnito clarify again....
In the WF notification during the time of "Reject"ion or "Approv"al, we want to upload a file and then perform Reject/Approve action. Can we extend the page to have Add button to upload file? Is that a lot of work?
Please any one give some suggestions...Thanks
Raghu Kulkarni -
User exit/badi to add items to a material document
Hi,
Is there any user exit/badi which can be used to add an item while creating a goods receipt document in MIGO. The requirement is that when user does a GR against a PO, the exit should check if there is a returnable packaging material for the material in the PO, and then include this packaging material in the GR. We found user exits/badis which allow changes to an existing item, but didnt find any which can be used to append an item.
Let us know if there is any way to do this.Do you have check the BADI : MB_MIGO_BADI ?
I have use it to modify the MIGO screen (add a new tab) create an input field and use this field to modify the material master data.
Maybe you could use for your work.
Fred -
User exit/BADI for tracing change of User Status in IW22
Hello,
I am looking for a user exit or BADI that triggers whenever ther's a change made to User status field.
eg. changing user status to APTC(Approved to be executed)
I then need the exit/badi to trigger my workflow to send mails to list of reviewers. I can handle that but I am not able to find the suitable exit.
I have seen BADI IQS0_STATUS_MAINTAIN, but no use.
Can anyone help?Hi..
Transaction Code - IW22 Change PM Notification
Enhancement/ Business Add-in Description
Enhancement
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
Business Add-in
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IQS_MASS_CHANGE BadI for Mass Changes to Notifications
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
No.of Exits: 6
No.of BADis: 7
Arunima -
Screen exits/BADIs available for Tcode-QM02/QM03
Hi Everyone,
I have to modify a screen for Tcode-QM02( 'Checklist' tab) and add a drop down field to it.I have not worked on screen exits/BADIs prior to this please let me know how to proceed with this.
Alsoplease tell me how can I manually go and check out whether a exit or BADI is available for this transaction?
Please reply as its a bit urgent.
Thanks and Regards
Abhishekhi,
check these exits n badi's.
Transaction Code - QM02 Change quality notification
Enhancement/ Business Add-in Description
Enhancement
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0001 Create PM/SM notification: Determine reference object
IWO10027 User exit: Generate user-defined settlement rule
IWO10026 User check on setting status 'Do not perform'
Business Add-in
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
goto system - status of ur transaction and find porogram name
then goto attributes of program n find package.
now goto smod or se18 click f4 click information system u will get all exits or badis available. -
Required a Exit/Badi when creating a PO in Item Category Level
Dear Experts,
I want a Exit/Badi when creating a Standard Purchase Order in item Category level
when i am giving item Category as L (Subcontracting) Component Over view will have the material that material should come and sit into the item level .
Rewarded If it is Useful.Hi,
check these...
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
Business Add-in
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
No.of Exits: 35
No.of BADis: 55
Arunima -
Hi all,
Anybody knows an User-Exit / BADI to use when you click over SAVE icon on me21n transaction?
I have a 4.6 version...
Thanks!Dear Julian,
First you would need to find all the available enhancements. The ABAPer would check what are all the enhancements getting triggered when save button is pressed in ME21N by putting break-points.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Regards,
Naveen. -
Hi Experts,
Our requirement is to trigger an email notification to the Employee after his time sheet is approved using the CATS approval WF.
We are using the portal to raise the time sheet and approve the same. We want to determine a User Exit/ Badi when the approver clicks on the approved button in the UWL.
We tried looking into the user exits/badi's etc. given but they are defined only for the R/3 system using the CATS transaction and not via the portals.
Could you kindly guide us with any Badi/User Exit that could be used when it is approved via the portal (i.e) when the approver clicks on the approve button in the UWL.
Cheers,
Belinda ClarkeHi,
Are you sure that those possible badis or user exit that you found are not also for Portal? Many times there is no difference whether something is done from backend transaction or a portal application - finally the same code/function is used and thus the same badis & user exits are executed. Of course not always, but plenty of times.
If if you cannot find anything, please check also the possibility to use enhancement. Check which RFC function is called during the approval (put RFC trace on) and put a break point there, and see what the code does and if you could put your stuff into some place.
Pay attention also the CATSDB table. That includes the cats entries and if remember correctly, you can find the work item ID there for each CATS entry. Maybe you can build some kind of report based on this table to send the emails instead of using some user exit or whatever.
Regards,
Karri -
User exit / BADI for me23n
Dear friends,
In a purchase order, in the item detail there is "invoice" tab. for the item category B "Invoicing plan" push button appears in the invoice tab. my requirement is if we click on this button the GR non-valuated check box in the "Delivery" tab of item detailsl should be checked. Is there any user exit/badi exists to accomplish? Please advise.Hi
you can use this BAdI
The Business Add-In (BAdI) ME_PROCESS_PO_CUST enables you to extend the business logic of the Enjoy purchase order on an individual basis.
You can thus influence the dialog transactions ME21N, ME22N, ME23N, and ME29N, and the BAPIs BAPI_PO_CREATE1 and BAPI_PO_CHANGE.
Typical applications for this BAdI include:
Processing of own objects
Processing of additional data on standard objects
Implementation of additional checks and derivations
Change of data in standard fields
Change in field selection
Use the method for the PROCESS_ITEM, this method enables you to change the item data and check it for correctness.
Thanks & Regards
Kishore -
Add button to the transaction SM30
HI
Whether it is possible to add a buton to application tool bar in the transaction SM30.
help reg this.Hi,
Yes, it is possible to add button for the transaction SM30.
This is possible through Menu exit.
Procedure for Menuexit:-
Go to SM30 ->System -> Status
Repository data -> Transaction -> Double click on it
Copy package name
Go to SMOD
Press F4 then a popup will open
Click on information system
Enter package name and press Enter
Then we will get Exit
Put cursor on that exit and press Enter
Go to change mode and save it.
Go to CMOD or alternatively we can use the path tools -> ABAP/4 Workbench -> Utilities -> Enhancements ->Project Management
Specify Project name in the enhancement text box
Click on Create icon on the application toolbar.
Enter description for the project and save it
Click on Enhancement Assignment button on the application toolbar
Give Exit and save it
Go to Components on the application toolbar
Double Click on MENUS001
Write function text which we want to add to menu item and save it with an request number
Double Click on Exit and write code there to display menu item in the screen
Activate the include program and finally activate the project.
Please reward points if helpful. -
Dear Experts,
I have a requirement in SNC system.
Requirement: Add a new button on screen Due List for Purchasing Documents, if we click on the button it has to open a new screen where we should have a file browse filed, browse and upload buttons to upload ASN details from presentation server.
am using,
WebDynpro Component: /SCF/UIWD
WebDynpro Application: /scf/snc_s
I have used following details to add button and acheived to add button alone, but how can I assing action/event, where can I create the screen, where can I write code and how can I assign this to button action.
ApplicationID: ICH
ScreenID: DUELIST
ComponentID: DLRLTLR1
Please help me out, almost from 2 weeks am doing R and D on it.
Thanks in advance
PalluThanks for your inputs Sai, but here the screen design is not static as normal webdynpro, normally we add a button and in OnAction property we create new action and we write code for the corresponding method, but in my case (expecially in SNC) everything I need to do with configurations, the transaction for screeen configuraitons is /N/SCF/SCREENCFG, and the BADI which I used for adding button is /SCF/UIMDL_APPCUST, you can find these details only in SNC (Supply Network and Collaboration) system.
Please try with inputs again.
Thanks again in advance!
Pallu!! -
User exit / badi to change engine serial-number of vehicle in ie02 ??
hi all ,
does anybody familier with user exit/badi that can handle the screen called : vehicle technology
in transaction ie02 for fleet management .
i need it in order to update the field : engineserialno that appears in this screen.
thanks in regard ,
amihI,
The following User Exits and BADIs for that tcode.
Enhancement
IEQM0001 Add. checks for equip. installation at functional locations
IEQM0002 Additional checks for definition of equipment hierarchies
IEQM0003 Additional checks before equipment update
IEQM0004 Object is allowed for contract partner (Order->MaintCont.)
IEQM0005 Object allowed for SD contract (MaintContract->MaintCont.)
IEQM0006 Object allowed for SD contract (Maintain maintenance cont.)
IEQM0007 Check/change manufacturer field in equipment master
Business Add-in
EQUI_SERLV_CHECK External Inspections for MARA_SERLV
EQUI_SCR_CC Implementable Subscreen for Equipment for CCM
EQUI_SCR_06 Implementable Subscreen for Equipment No. 06
EQUI_SCR_05 Implementable Subscreen for Equipment No. 05
EQUI_SCR_04 Implementable Subscreen for Equipment No. 04
EQUI_SCR_03 Implementable Subscreen for Equipment No.
EQUI_SCR_02 Implementable Subscreen for Equipment No. 02
EQUI_SCR_01 Implementable Subscreen for Equipment No. 01
<REMOVED BY MODERATOR>
sekhar
Edited by: Alvaro Tejada Galindo on Feb 27, 2008 3:28 PM -
User exit/BADI for Return PO item delivery Address
Hi Guyz,
We have a requirement where in when a PO item is marked as return PO item(In ME21n/ME22n/ME23n We have check box at item level) and click on enter/Check/Save, In delivery address of item details we have to populate Vendor address. By default SAP populates Plant address. If we manually give Vendor number in item details=>Delivery address tab then it populates vendor address. We want to automate this functionality.
Is there any Exit/BADI which serve this purpose.
Note: We need this functionality for few doc types(i.e PO doc type should also be available in the exit).
Any ideas could be really helpfull.
Thanks,
Vinod.Hi,
there are some user-exit & enhancements....
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
Some BADI s:
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
No.of Exits: 35
No.of BADis: 55
Arunima
Maybe you are looking for
-
Hi, I'm new to logic pro and would realy appreciate some help. I have several versions of guitar rig 5 on my mac. How do I find out which one is being used in logic. I looked in plugins and see a version that is only 109 mb but I have another that is
-
What is the best way to migrate to a new computer and software version?
New computer, new software version. Brand new MacPro with OS X v10.9.4 and Pegasus Promise 24 TB R8 Raid 5. Old machine would only run FCX v10.0.9. All project and media files on eSATA drives hooked up to (really) old MacPro. No room to make copi
-
Can't open Acrobat pdf files in document library - SBS 2011
I've uploaded some Acrobat PDF files to a document library in the companyweb (SharePoint 2010 Foundation website) on SBS 2011. But if I click on one of them in the standard view, acrobat opens and displays a message "The URL you have provided could n
-
Does SQL Developer 3.1 support "Deploy Objects to cloud" ?
Hi, in the document Using Oracle Database Cloud Service, Release 2012.5.31 E27038-01, The following statement is on page 4-3: To upload data ... (use) SQL Developer cart. Click Deploy Objects to Cloud" I do not see this option available. Is this a fu
-
Trying to download latest WLC and recieve the following error: Authorization Failed. No sufficient privileges User account I am using has read/write access. Any thoughts? Thanks izzy