Notifications do not work for news on itouch 4G

Anyone know how to fix notifications on itouch 4G. This is my second one and once I got notification with CNBC RT then nothing. Notifications from other news never worked. I exchanged the itouch for another one and same thing. Other people I know said the same thing. Apple store no help. I have Itouch 2G and receives 100% all news notifications while the 4G sitting right next to it is totally silent. They are set up the same so I know how to enable it of course. New firmware does not fix the problem. The push notification test app does work. Latest OS is 4.3.1. Apple keeping silent on this defect since no one in Apple store knows anything about it and can't fix it. All background apps are closed also as they tried to tell me the multi task is using to much resources.

This is because invitations sent to your iCloud account ([email protected]) are actually going to your GMail account ([email protected]). Sort of a catch 22 with having an iCloud account that doesn't utilize an @icloud address.

Similar Messages

  • My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad.  I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

    My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad.  I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

    Hi there Lizabethfromaz,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Notification will not work for Mail

    Downloaded Mountain Lion; everything appeared to go well with install. When I first launched Mail, there didn't seem to be any issues (had to convert messages into new format, etc.) However, Notifications for Mail is not working. When a new message is sent, it will not appear as a banner, alert, etc in the corner. I've checked System Preferences to ensure that Notifications for Mail is on; I've also checked Mail Preferences to ensure that new messages are going to the notification center. Any thoughts? Other notifications seem to be working (I think).
    Running on a 15-inch Mid-2009 MacBook Pro, 8 GB RAM, 2.53 GHz Intel Core 2 Duo.

    UPDATE: It does appear that if you send yourself an email (even from another account) and both emails are within Mail, you will not get a notification. It will download in Mail; it will be readable, but there will be no notification from the new notification center.
    All of my other Mail notifications (e.g. emails from other people or accounts) have been coming through with no issues.
    Is this a bug? Or was this intended? We shall see.
    Thanks all for your responses.

  • Notifications is not working for me.  Just out of the blue it stopped working Friday afternoon

    Notifications just stopped working the other day.  I cannot figure out why or how to get it started.

    Backup and then restore as new and see if it works or not.

  • FR reports not working for new planning application

    Situation:
    Hyperion 9.2.0
    New planning application created and also registered to share services. One existing group have role assigned as 'Interactive User' and not able to perform operations on workspace (FR), FR Studio and Smart view. (Note: Admin can perform such activities and there is no error.)
    Key user receiving mention below messages while accessing FR report from workspace and using FR studio for particular report related to only new application. The existing FR reports on different planning application working fine working fine from workspace and FR studio. Here are the errors:
    *Workspace Error [Only for new application report]*
    [Wed Aug 24 15:04:35 2011]Local////Error(1051440) Analytical Services user [abcd] Authentication Fails against the Shared Services Server with Error [Failed to authenticate user abcd against provider Native Directory]
    *FR Studio [Only for new application report]*
    Error connecting to database connection XYZ: [Wed Aug 24 15:08:50 2011]<Server Name///abcd/Error(1051025) User abcd is not permitted to access application XYZ
    Smart View Error (Only for new application connection)
    Cannot open cube view. OLAP Error (1051025): User abcd is not permitted to access application XYZ.
    Analysis
    While looking Essbase, I identified that under security (User/Groups), group that have access as interactive user is not listed. Only I can see the groups that have admin roles. However I can see all other planning application successfully displayed groups associated to particular question.
    Please help to resolve the issue. I am new to this concept, so the detailed level description will help me lot
    Thanks
    Edited by: user10070515 on Aug 25, 2011 4:25 AM

    Hi
    Thanks For the replies.
    After the data is copied into the layout. User is changing the values of few key figures and saving. A new line item is created in the cube with the new values.
    Ex
    Cust ....qty.....Value....Revenue
    c100....10........100.....1000
    Changing the value in layout
    Cust ....qty.....Value....Revenue
    c100....10........150.....1000
    After saving in the cube
    Cust ....qty.....Value....Revenue
    c100....10........100.....1000
    c100....0........50..........0
    When the user execute the report revenue is not populating correctly. And i was expecing 150 *10 = 1500. I understood the issue. Can anyone tell me how can i achieve without updating the quantity how can i get this?
    Thanks
    Annie

  • GPO not working for new Users (Background)

    Terminal Server 2012 in a hosted environment
    I've set the below policy to set a default background wich can be changed by the users after this.
    The target is an networkdrive. (The Reason behind this is that we have multiple resellers that all have the same networkdrive but pointing to a different store) Lets just say for this example that is P:/Background/ResellerBackground.jpg
    The policy is Linked to the Resellers OU.
    This works perfectly for all the existing users.
    For new users this is not working at all. It does run the policy but it create the profile after running the policies.
    So the above setting gets overruled by the default windows server 2012 background. The RunOnce atribute is set now, so it will not load it again.
    I have read a lot of different sollutions so far, but none are working in this environment. (From changing the default Hive to changing the default picture etc)
    One sollution came close, but not working perfectly either, this is removing the RunOnce atribute from the register, and letting the new users log in again. You do not wanna let new users login twice.
    Before Windows 7/8/2012, in XP it just copied the default user and then the policies ran. So here the problem does not exist. Now it makes the profile after running the policies.
    Anyone having an idea to resolve this issue? 

    Hi,
    Before going further, what’s the value in the wallpaper registry entry
    value data for new users?
    >>One sollution came close, but not working perfectly either, this is removing the RunOnce atribute from the register, and letting the new users log in again. You
    do not wanna let new users login twice.
    If we choose this solution, we can try running cmd command
    gpupdate/force to see whether it can work.
    Another workaround is we can do it from scratch. We can create a new GPO to deploy wallpaper for these new users. The steps are the same as previous ones, just using
    Security Filtering to apply this new GPO to new users, and unlinking and deleting the GPO after the policy getting updated.
    Best regards,
    Frank Shen

  • Mac to Mac file sharing not working for new folders

    My folks got a new iMac today, and I've got a 2007 iMac on the same network. We're both running 10.8.2.
    I had a few folders set up to share files. My public folder, Movies, and then a new fold called "Mom" that I set up specifically for them. The settings are identical on all the folders, but they can only access "Movies." If I try to access any other shared folders from their machine, I get the following error:
    "The operation cannot be completed because the original item for "[insert folder name]" cannot be found."
    I have read the Mac 101: File Sharing document (http://support.apple.com/kb/HT1549?viewlocale=en_US) and followed the directions to no avail. I have removed and re-added all the folders, and still, only "Movies" is readable from their iMac (it too was removed and re-added). The settings for all the folders are identical to the settings for "Movies."
    Additionally, after a short period any new folder I create and use as a shared folder will no longer allow me to rename it, even after I remove it from the shared folders list. The folders are not locked, and I have full admin privileges.
    (Things work fine the other way, though: I can set up shared folders on their new iMac and access them just fine from my 2007 iMac.)

    hi there,
    that error message sounds like you placed a shared folder within a parent folder that is not shared. It also can help to boot into Recovery Mode (pressing Command and R simultanously when hearing the startup tune), launch Disk Utility, select the disk containing your OSX installation (usually named Macintosh HD) and choose Verify Disk Permissions. Should any problems be reported select Repair Disk Permissions. Once that is finished, reboot normally.
    Though unlikely, it might have happened during all the folder removing and readding that some Permissions are out of sync. So checking these Permissions is merely a precaution
    Once you are back in "normal" OSX using your admin account, try this:
    Open Terminal from the Utilites folder
    enter the following commands one line at a time:
    mkdir /Users/Shared/Family
    mkdir /Users/Shared/Family/Movies
    mkdir /Users/Shared/Family/Mom
    chown -R <placeholder> /Users/Shared/Family           
    chmod -R 755 /Users/Shared/Family
    Be sure to replace <placeholder> with your account's short name (no brackets!)
    Now open System Preferences and select Sharing
    Select File Sharing from the left pane
    Click on the little plus and add /Users/Shared/Family to your shares (The subfolders are automatically included)
    in the right most pane check the access privileges. They are set, so that you can read and write to those folders, while everyone else can only read. If you want everybody to have read and write privileges, use 777 instead of 755 within the terminal last command.
    Now the other computers should be able to see and use the shared folder you just created.
    If you create individual user accounts on your machine for every family member you want to access the shared folders, you can choose far more sophisticated levels of access privileges.
    Hope this helps,
    Chris

  • CS4 Not working for New Macbook retina display?

    So I finally upgraded to the  new MACBOOK PRO retina display I've been using CS4 since 2009 now since I transferred all of my files/data/etc into my new laptop for some odd reason I can't use my Photoshop it keeps saying
    FATAL ERROR
    /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
    Anyone know why? Do I need to finally upgrade to the latest CS? Before you shout stupid...I'm not that professionally educated on the way these things work.

    Photoshop and most other adobe products never work right after transferring instead of reinstalling using the adobe installers, because the install of photoshop is not a tidy application like most mac applications and strews things all over the operating system, not just in the applications folder and transferring it from from backup or whatever can't possibly transfer all the bits and pieces that make up the photoshop cs4 install.
    If your lucky you can download and install photoshop cs4 from this link and hopefully will that repair any of the missing items.
    Download CS4 products
    Otherwise, you'll have to run the adobe creative cloud cleaner, delete everything adobe on the hard drive and reinstall photoshop cs4

  • Why is notification center not working for mail?

    Im not receiving mail on notification center, why is that happening?

    Good, glad it worked.
    If you find you're getting too many notifications and get fed up, you can set it in Mail to VIP (smart mailbox).
    You can make people VIPs by clicking the star symbol in front of their names and Notification Center will only notify you about emails from these certain people.

  • Notification Center not working for Mail

    Notification Center doesn't give me a banner or a sidebar entry when I recieve an incoming e-mail message. The problem persists regardless of whether the Mail app is open or closed. I have checked my settings in both System Preferences and in Mail. What gives?
    Thanks for your help.

    Good, glad it worked.
    If you find you're getting too many notifications and get fed up, you can set it in Mail to VIP (smart mailbox).
    You can make people VIPs by clicking the star symbol in front of their names and Notification Center will only notify you about emails from these certain people.

  • Drivers are not working for new BT wifi dongle

    I just got BT infinity installed today. I also got the dual band AC wifi dongle 900 But it will not register on my PC. I tried installing the drivers for it but i noticed they are only for the 600 model. I know the Home hub 5 just came out along with the new dongle so is it just a case of waiting for drivers to be realesed?

    Hi lightlamp,
    I'm sorry about that, check out this link for the AC dongle drivers and let me know if you need any further help. 
    Cheers 
    Neil
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Push notifications do not work for iCloud calendar

    Hi,
    I have an iCloud account registered with my Gmail address. Whenever I receive a calendar invite, I do not get a push notification on my iphone or ipad (push notifications for calendar.app are turned on).
    The same goes for updates of calendar invites. They just show up in my e-mail, but are not automatically updated.
    Calendar is enabled in my iCloud account, and disabled for my Gmail account (if I turn it on in Gmail, I do get a push notification).
    I've set invite's on iCloud.com to in-app notifications.
    Does anyone have an idea how to fix this and enable push notifications for the calendar invites i receive?
    Thanks in advance

    This is because invitations sent to your iCloud account ([email protected]) are actually going to your GMail account ([email protected]). Sort of a catch 22 with having an iCloud account that doesn't utilize an @icloud address.

  • End-user notification is not working for one of the untagorized HTTPS webistes on IronPort WSA

    When users try to access the URL https://cloud.skytap.com/tools/connectivity they are getting 'Internet Explorer cannot display the webpage' instead of regular IronPort WSA end-user-notification. This URL is currently uncategorized. Please advice.

    Yes, we have set drop all the uncategorized URLs. We do get end-user-notifications for HTTP websites which are uncategorized.
    However, if any of the HTTPS websites which are uncategorized, then we wont get end-user-notification.

  • Why does installation cd not work for new hard drive for 2009 MacBook pro?

    my hard drive died in my 2009 MacBook pro so I bought a 1tb ssd drive and had the store physically install the drive only.   I arrived home and stuck in the original installation disc and pressed and held the c key after the chime. Nothing happened. after a minute or so the screen turned black and rebooted up again with the chime.  It would continue to reboot whether I pressed the c key or not. when i pressed the d key it would say:
    "Apple hardware test does not support this machine"
    why why isn't this working like it is supposed to?
    thsnks

    Ryan,
    Have you tried using the Startup Manager (holding down the option key) whilst booting? If everything works as it should, you should be given the option to choose the DVD to boot. Holding down the 'D' key should load the Apple Hardware Test.
    Good luck,
    Clinton
    MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Iphone4 mail push notification does not work for any email

    Suddenly, I stopped receiving any push notifications from mail. I tried reset, deleting and adding account, toggle through all notifiction options, restarting the phone. I also have problem receiving notifications from facebook. rest of all app notification works fine. any solutions ?

    Take a look at this http://support.apple.com/kb/HT3576
    and your next step is a restore of 5.1.1 via itunes http://support.apple.com/kb/HT1414

Maybe you are looking for