Nstalling Windows Home Server 2011 on a ProLiant ML350e Gen 8 Server (Nothing appearing in Operating System Selection During Install)

We just purchased Windows Home Server software that required a new server to be purchased. We went with the ProLiant350e Gen8 Server. IUpon starting up the new ProLiant server I booted from CD-Rom and got to the Windows Install program. I clicked  "Install
A New Server" However, as soon as this page loads it gives me an error that says "Load Driver" "A required CD/DVD Drive Device Driver is Missing. If you have a floppy disk, CD, DVD, or USB flash drive, please insert it now." It gives
me the option to browse or click okay. Browse only brings up the (x:) Boot drive and VID. It doesn't find the driver in VID Than if I click okay it gives me a message that says "No Device Drivers were found. Make sure that the Installation media contains
the correct drivers and then click ok" I have tried to use smart provisioning but this fails as it cannot recognise the media from the DVD drive.
Thanks in advance,

You should use HP smart start DVD to install the Windows Home Server. If you are booting directly from the Windows DVD it would some times not detect the drivers because of the hardware compatibility issue. You should contact the the vendor and seek help
from him.
http://www.arabitpro.com

Similar Messages

  • Migrate from Exchange Server 2011 to Mac OSX Lion Mail Server

    Hi all,
    I'm looking to migrate from Exchange Server 2011 to Mac OSX Lion Mail Server.  I work for a company with roughly 30 employees and they use exchange for mail, contacts and calendars.  We want to take full advantage of OSX Server and to completly get off of exchange.
    What are the best ways to do this?  Are there any tools available to help this process?

    I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
    If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
    There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
    Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

  • How to install windows 7 in i mac model A 1224 where a message of an operating system wasn't found

    how to install windows 7 in i mac model A 1224 where a message of an operating system wasn't found. Try disconnecting any drives that don't contain an operating system.

    Thank you sir for replying my question, but unfortunately iwas using only windows 7 on my imac A1224 as my mac OS removed accidentally on earlier. Now there was only windows on the drive. i was trying to updating my windows, then on restarting, it can't boot properly (not taking cd or booting from Hd). if there is any hot keys for booting from cd or hard disk? i'm very grateful as you can help me in this problem.
    thank you once again
    with regards

  • I want to install CyberLink PowerDirector on my Macbook Pro but I need Windows software operating system to be install ? I need help!

    I  downloaded PowwerDirector 12 trial and when I try to open it,  I got a message that "CyberLink PowerDirector was not compatible to Mac". After some inquiries, I found that I need Winows software operating system to be install in Mac! Can sombody help me?

    For Windows on a Mac you'd have to own a Windows retail system installer with keycode, and use BootCamp utility in the Mac OS X to set up a partition on the computer hard disk drive (issues? if you have Apple Fusion Drive where a SSD + HDD are automatically co-joined) and then install the Windows system there.
    Or get & use Parallels, or VMFusion software and use it along with Windows to run applications written for a Windows OS. And would need to have a large internal hard disk drive with plenty of room since the space for Windows takes away space for Mac OS X and its applications to run; and also you'd need plenty of chip RAM installed to run this other System plus software... and for Windows, its own anti-virual software not needed at all in a Mac.
    Not sure about this, http://www.wondershare.com/video-editor/mac/ suggests in their advert to be something to use if you can't use the cyberlink product.
    Or don't want to buy the upscale or pro Apple image software that does a fine job at a cost. I'd try & avoid running Windows in a Mac even though it can run three or more different OS, including linux/unix builds.
    Never heard of either one: wondershare or cyberlink powerdirector.
    (the latter looked 'more pro' for windows)
    {But check for any hint of some odd effects before you get and install any software from a marginal or unknown source, since adware can follow, and really odd things can start to happen then, like search engine redirects.}
    Anyway, helpful information about your computer and its current configuration, OS X version, RAM installed, hard disk drive specs (free vs used capacity) are numbers that can make a difference going into a new thing. Even Mavericks alone is not an upgrade, often that requires a bunch of extra chip RAM capacity.
    Not sure if this helps, another may offer more direct ideas...
    Good luck & happy computing!

  • Hello  I have an I mac with Yosemite operating system.  I installed a windows seven 64 bit on it. also i have a parallels desk top with version 10. if i run my windows  without parallels my windows and my office is activated ,but if i run my parallel

    Hello
    I have an I mac with Yosemite operating system.
    I installed a windows seven 64 bit on it.
    also i have a parallels desk top with version 10.
    if i run my windows  without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
    My problem is activating my windows and office through parallels desktop .
    i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
    all of my application in windows works properly through parallels desktop except 
    activation of office and windows .
    I do not no any solution for my problem , i need for helps .thanks 

    It is not W10, it is the Technical Preview version of W10.
    Search on the Windows forums (fora for the latinist) for activation in the TP W10.

  • Installing Adobe Reader under Windows 8.1 for its language really to be set "same as the operating system"

         How can I install Adobe Reader 11.0.10 in both German and English in order to choose the language as per the Windows 8.1 language?  I already have Reader 11.0.10 installed with the language set to "same as the operating system", but only English is chosen.  How can I add French or another language to Adobe Reader later (if I in the future decide to add to Windows 8.1 support for more than German and English)?  Can I avoid deinstalling my current Reader software?  Can I keep Reader at 11.0.10 or must I install a lower level in order to obtain support for both German and English?

    Yes, you need to uninstall the single-language Reader version before installing the MUI version.
    Also, the MUI installer is 11.0.0, so you will need to update it to the current version.
    If you download the updates manually (from http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows), make sure you download the updates for MUI.

  • Music on external drive. Use I Tunes to organize. Stream to TV and home stereo through Mac Book and Apple TV. Updated to Mavericks operating system. Now Many times art does not match song or music stops playing altogether. Any ideas ?

    I have music on external G drive. Use I Tunes to organize and play music. Stream it to my TV and home stereo using MacBook and Apple TV. Just updated operating system to Mavericks. Now have two issues when playing music.  1) Many times album art displayed on TV will not match song playing, and 2) Music will just stop altogether sometimes. Any ideas ?

    Agreed! This bug with the ringtone delay (№4.1) is really annoying

  • Windows 7 only gives me active USB ports when the DISABLE DRIVER SIGNATURE ENFORCEMENT is selected during system boot

    I can only use the computer if I press 8 and select "DISABLE DRIVER SIGNATURE ENFORCEMENT". Without this, the system comes up OK but I do not have access to the keyboard and mouse. If I select any other boot option the system boots up but I am
    unable to login since neither the keyboard nor the mouse is working.
    The Device Manager is clean. All drivers work and have digital signatures. I tried to use local group policy editor to disable digital signature enforcement but was not able to make any difference. The OS is 64-bit Windows 7 Professional with Service Pack
    1 and latest updates.
    The system includes a WD USB 3.0 card, which I have been using for over 3 years without any problem. I recently (3 days ago) updated the WD SmartWare for Windows software. It seems that my problem coincides with this update. Since then, I removed WD SmartWare
    and Installation software and restored the Registry to its previous restore point however the problem still exists.
    As per SIGVERIF the not signed drivers are:
    difxapi.dll              7/13/2009      2.1.0.0          Not Signed
    usbccgp.sys              9/4/2013       6.1.7601.18251      Not Signed              
    usbd.sys                 9/4/2013       6.1.7601.18251      Not Signed                        
    usbehci.sys              9/4/2013       6.1.7601.18251      Not Signed                    
    usbhub.sys               9/4/2013       6.1.7601.18251      Not Signed                       
    usbport.sys              9/4/2013       6.1.7601.18251      Not Signed           
    usbuhci.sys              9/4/2013       6.1.7601.18251      Not Signed   
    The problem appears to be related to the not signed USB drivers.
    The current USB 3.0 host controller is from Renesas Electronics (ver. 2.1.39.0). According to the Device Manager it is digitally signed and working fine.
    Does anyone know how to fix this problem?
    Thanks,
    DC

    This issue was fixed on my PC as follows.
    1) Taking ownership of the above usb*.sys files in  the drivers folder
    2) renaming them to usb*.sysold
    3) Using Device Manager to uninstall all USB devices with the yellow warning ! next to them
    4) Doing a Scan for Hardware changes via the Device Manager toolbar and then waiting a few moments whilst the USB devices are re-installed with signed drivers.
    Hope this helps you....
    usb drivers files in my drivers folder after the above process:
    12/02/2013  04:12            19,968 usb8023.sys
    21/11/2010  03:24            32,896 USBCAMD2.sys
    27/11/2013  01:41            99,840 usbccgp.sys
    12/07/2013  10:41           100,864 usbcir.sys
    27/11/2013  01:41             7,808 usbd.sys
    27/11/2013  01:41            53,248 usbehci.sys
    25/03/2011  03:29            52,736 usbehci.sysold
    27/11/2013  01:41           343,040 usbhub.sys
    25/03/2011  03:29           343,040 usbhub.sysold
    25/03/2011  03:29            25,600 usbohci.sys
    27/11/2013  01:41           325,120 usbport.sys
    25/03/2011  03:29           325,120 usbport.sysold
    14/07/2009  00:38            25,088 usbprint.sysold
    11/03/2011  04:37            91,648 USBSTOR.SYS
    25/03/2011  03:29            30,720 usbuhci.sys
    21/11/2010  03:23           184,960 usbvideo.sys
                  19 File(s)      2,783,104 bytes
    The .sysold files are the ones I renamed, I think also renamed the usbccgp.sys - but accidentally deleted it after the rename..

  • Compatibility Issues with CS2 and Windows 2000 XP??? This is supposed to be THE one operating system CS2 DOES WORK ON? Can someone help - I really need my CS2 back! Thanks.

    HELP! Years ago - SEVEN to be exact- I PURCHASED Adobe CS2 and used it extensively. Then I was in an accident that took five years to recover from. After my recovery I tried to get back to using my Adobe products only to find that Adobe was discouraging use of CS2 and since I OWN a LICENSE and that was the LAST version I used I wanted to begin again with a version I am familiar with. Many months later, apparently I wasn't the only one who wanted to KEEP USING CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT due to OS compatibility issues Adobe continues to discourage downloading and use. HERE'S THE THING: I have the SAME SYSTEM running the SAME OS as when I first PURCHASED IT. I have downloaded the EXACT SAME VERSION of CS2. It installs fine. But I cannot OPEN the application and the troubleshooter reports there are "COMPATIBILITY ISSUES". WHY?!?!?!?!?
    I'm on a PC running Windows 2000 XP. I OWN a LICENSE for Adobe CS2 and it used to run on this very same machine. I had to re-format my system two years ago so it has much more free space but when I  try to OPEN the application it won't run. When I run the Windows Troubleshooter it reports system compatibility issues?! Can anyone advise me what to try now??? Thank you.

    Yes, I have. My system was completely cleaned of everything and I'm just now RE-INSTALLING CS2 for Windows2000 XP from the Adobe site that gives you versions to select for your OS. I have successfully downloaded disks 1,2 and 3 and I can INSTALL disks 1 and 2, but it FAILS at disk 3. I REALLY need to resolve this today because I need to submit some work by tomorrow and the troubleshooting isn't helping!
    Can you advise anything else . . . anyone? Thank you!
    Khrystle13

  • Locked Out of Windows Home Server 2011 - Removed Password

    Hi All
    I made a bit of a boo boo. This relates to Windows Home Server 2011. Basically I needed my server to boot directly to desktop and not go to a login screen. I thought I know I will just remove the password (bad decision).
    It now goes to the login screen and it won't let me login with no password. It says something about not being allowed.
    So I am now stuck at the Login screen. I don't really want to have to re-install the OS again, so any help would be great.
    Cheers

    Hello neilmjones,
    mmm, there is something strange: if you was able to reset password to blank, then the System was set to permit blank passwords (System Policies), so you should be able to login too.
    Are you sure you reset password to blank ?
    Answering to your first question, once you resolve login issue, you can follow this
    Microsoft Support article
    How to turn on automatic logon in Windows (even if it isn't reccomended) or this other Blog post How
    to Enable Auto-Logon for your Server.
    Note: Please, write here new TechNet Forums post link you opened on Windows Home Server 2011.
    Bye,
    Luca
    Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

  • Opc server 2011 V5.5 in Lookout 6.6

    Hello,
    I am using Lookout 6.6 with the OPC-Server 2011 V5.5.
    The NI-Server is reachable via Lookout and via the integrated OPC-Quick-Client. But if I am using an other Client such as the OPC Data-Spy or PROFILAB,
    the server is not reachable, the server name is displayed in the list, but can not be accessed. Other installed OPC-Servers on my PC can be accessed by every client. Do I need to have a special licence for the NI OPC Server that came with the Lookout 6.6 Software Package? I am using Windows 7 Home 32bit.
    Thank you for any advice
    Greetings
    Claude
    Solved!
    Go to Solution.

    Hello,
    Thanks for the reply, I found now the information to in the Licence Manager.
    It is a pity , but I have to accept.
    (Even my Labview 2009 Educational Version can not connect)
    Greetings
    Claude

  • Xfi extreme audio SB0790 Windows Home Premium

    I have installed Windows 7 upgrade on an HP desktop that was running XP Pro. Install went fine exept I have an error "No Audio Device Installed"? yet I have installed the Xfi extreme audio card in its slot. The card works fine with XP. I have gone with the windows update installed the current driver with still no luck. Searched the forums again no luck, have done my due diligence via the internet and with beta drivers and still only have the red X everytime I boot. What can I do to get this card working agian?

    Re: Xfi extreme audio SB0790 Windows Home Premium0 As I stated in my first post I did my due diligence and after installing beta drivers for the SB0790 then installing the recommended driver dated July 09 it still does not recognize the device (7 Home Premium). I have gone through every forum google points me to we are not alone, taking advice I've installed then deleted these drivers about 0 to 20 times I've tried compatibility mode "Vista" "Vista SP", "Vista SP2", "XP", and so forth with no luck also running the driver as admin. Every time I update driver in 7 it tells me I have the current driver yet I have a red X and no sound.
    I can't believe that Creative does not have working drivers for the final release of 7 knowing that they had 6 to 8 months to prepare. Really poor on their part.

  • I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

    I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as  I have associated .pdf files with adobe reader. My operating system is windows 7.
    When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'.  I have not changed my security settings (Tools, Internet Options, security).

    Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • After installing new operating system windows 7 on imac 27, mac stopped working.

    We bought new imac 27, late 2012. Installed windows 7, mac stopped working. We restarted mac os, but system cant see hard disk. Cant install mac. What to do?

    How did you install Windows 7?  Via Boot Camp, using a Windows 7 system builder disk, or with Parallels or VMWare's Fusion?
    If you installed using Boot Camp, it sounds as if you goofed and installed Windows onto the Mac partition instead of the Windows partition.  What happens when you hold down the Option key when you restart the Mac?  Do you see a Mac partition and a Windows partition?
    I would suggest seeing if you can use the Recovery mode on your new iMac to reinstall your iMac's operating system if you installed Windows over it by mistake.  Please see this Apple Support document on how to accomplish this:
    http://support.apple.com/kb/PH11273?viewlocale=en_US&locale=en_US
    If you installed Windows using Parallels or Fusion, I can't help you, as I've zero experience with either.

  • HP Desktop 2542 - Windows 7 Ultimate 64 bit 'operating system is not supported'

    Hello, I'm having problems installing my new HP Desktop 2542 on my PC.
    I've downloaded the correct driver (Windows 7 Ultimate 64 bit) and upon installation I receive the message 'The Operating System of this computer is not supported. For a list of supported Operating Systems blah blah blah....'
    I'm using a standard USB connection.
    I've managed to install it on my Android devices and my Windows 8 laptop but I'm having no luck with the PC.
    What should I do?
    Thanks in advance for any help you can offer!

    Hello @rossinnit and welcome to the HP Forums!
    I'd like to help you get the Deskjet 2542 installed on your Windows 7 PC
    I'd recommend that you download and run the HP Printer Install Wizard, and that will seek out the drivers online (from the HP web page) and download them for you and then start the install as well.
    With that tool you can plug in the USB cable when it asks near the beginning to find the right drivers.
    Let me know how things go for you!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for