Number of Connections in the JDeveloper
//**Bad English
I am working witch J2SE.
I have one AplicationModule.
I have one JDesktopePane that it has two JMenu.
One window for country, other for State both in exactly ApplicationModule.
When I open the two screens at the same time it I create two sessions in the bank. When I open one, closed it and I open to another one reaproveita it the previous session. I would like that my application always had in the maximum a connection with the bank. How to make this?
//***Português
Eu estou trabalhando com J2SE.
Eu tenho 1 AplicationModule.
Eu tenho um JDesktopPane que tem dois JMenu.
Uma Janela para abrir País outra para estado, ambas com o mesmo aplicationmodule.
Quando eu abro as duas telas ao mesmo tempo ele cria duas sessões no banco.
Quando abro uma, fechou-a e abro a outra ele reaproveita a sessão anterior.
Eu gostaria que minha aplicação sempre tivesse no máximo uma conexão com o banco. Como fazer isto ?
Message was edited by:
Edinei Manica
Obs.
I am creating two BindingContext, one for each window.
And two times the command, one for each window.
mgr.loadCpx("DataBindings.cpx", map);
I also have two JUPanelBinding.
Therefore, I not obtained used the exactly BindingContext for two Window.
How decide this? I need only one conection for Aplication.
Similar Messages
-
My sister logged onto my Apple ID when she got her iphone and now her phone number is connected to the account. I want mine on the account
Hey DevonElise,
Thanks for the question. The following article will help to unlink your sisters phone number, and link yours:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks,
Matt M. -
How do I configure the number of connection in the pool for webservice axis
Hi
How do I configure the number of connection in the pool using xml.
We are using axis 1.4 and commons-httpclient-3.0.1Is there any way we can do it using the client-config.wsdd file.
We do not want to do any modification in the code for this.
Is it possible to set socket timeout also in the wsdd file.
Your resolution will be really helpful for us.
Thank You
OttranExport them at a smaller size:
File -> Export - not the options at 'Size'
Regards
TD -
Problem with an Internal IP number and connecting to the Internet
I am having trouble connecting to the net. The IP number in my TCP/IP settings displays an 'internal' IP number begining with 169., instead of the correct one (beginning with 82.).
I can temporarily solve this problem by running my ISP's Set Up Disc, however as it reverts back to the internal IP number on closing down, I have to run the Set Up Disc each time I start over.
Anyone with any ideas would be greatly appreciated.
Cheers.
ps I am using an Ethernet Modem.
iMac 233 Mac OS 9.1.x
iMac 233 Mac OS 9.1.xI came across some info. titled 'Reinstalling Internet Access software' in a text file titled 'About Internet Access' in the Internet Folder. It says:
"If you are experiencing frequent problems using any of the Internet Access programs, your Internet Access files may be damaged and need replacing. Before performing a clean installation of the Mac OS to replace the files you must throw away the Internet Access files in the Internet folder, the Internet Access extension (in the Extensions folder), and the Internet Preferences and Internet Setup Prefs files (in the Preferences folder)
Note: When you throw away the Internet Preferences file you will lose your Internet account information. You can reenter it in the Internet control panel."
I will follow that advice and reinstall from my ISPs' Broadband Set Up CDs. -
Query: The number of connections possible on APEX
Hi all,
Hope you all are doing good.
there is one query,
Does the number of connections to apex depends on database memory ???
Is there any limitation on number of connections at the same time ?
i have one application,
APEX 4.1
DB 11.2.0.2
when it was launched.., people tried to login and as soon as they logged in the poratl/application went down. had to bounce the DB to get it back.
was clueless on what would be the reason for this behavior.
how do i make sure this would not occur again..,
thanks and regards,
LittlefootHi Dietmar,
i have the same assumption, but the problem here the user is facing is, they have used some java scripts to upload the excel sheet and when uploading it the apex portal goes down.
they are still testing it, expected user to login is around 600 at the same time.
From the db side :
SQL> sho parameters sga
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 3808M
sga_target big integer 0
SQL> sho parameters job_queu
NAME TYPE VALUE
job_queue_processes integer 1000
SQL> sho parameters large
NAME TYPE VALUE
large_pool_size big integer 0
use_large_pages string TRUE
SQL> sho parameters java
NAME TYPE VALUE
java_jit_enabled boolean TRUE
java_max_sessionspace_size integer 536870912
java_pool_size big integer 1424M
java_soft_sessionspace_limit integer 536870912they are getting the error : ORA-04031: unable to allocate 91992 bytes of shared memory
how do we remove the error..,
any help on this.
additional details : server has 12GB ram.
thanks and regards,
littlefoot -
GetPooledConn: No more connections in the pool for Host
We are receiving these types of errors in our NSAPI plugin debug logs:
Mon Dec 15 09:29:29 2008 <267131229354969494> trying connect to PRIMARY '172.16.81.45'/7141/7142
Mon Dec 15 09:29:29 2008 <267131229354969494> getPooledConn: No more connections in the pool for Host[172.16.81.45] Port[7141] SecurePort[7142]
Mon Dec 15 09:29:29 2008 <267131229354969494> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Dec 15 09:29:29 2008 <267131229354969494> EINPROGRESS in connect() - selecting
How can we increase the number of connections in the pool so that these don't happen?We are seeing a similar connection pool error captured in the WL proxy log doing load testing. Is there an answer to this question of how to increase this pool size?
Fri Jan 16 14:59:02 2009 <535212321359422334> Trying a pooled connection for '191.228.175.226/7003/0'
Fri Jan 16 14:59:02 2009 <535212321359422334> getPooledConn: No more connections in the pool for Host[191.228.175.226] Port[7003] SecurePort[0]
Fri Jan 16 14:59:02 2009 <535212321359422334> general list: trying connect to '191.228.175.226'/7003/0 at line 1319 for '/SIT-cccpol/PTGadget/SetCookies.jsp'
Fri Jan 16 14:59:02 2009 <535212321359422334> INFO: New NON-SSL URL
Fri Jan 16 14:59:02 2009 <535212321359422334> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Fri Jan 16 14:59:02 2009 <535212321359422334> EINPROGRESS in connect() - selecting
Fri Jan 16 14:59:02 2009 <535212321359422334> Local Port of the socket is 2097
Fri Jan 16 14:59:02 2009 <535212321359422334> Remote Host 191.228.175.226 Remote Port 7003 -
JMS Exception - unable to connect to the JMS destination
Hi,
I've configured WebLogic10R3 Cluster with one Admin Server and 2 Managed Servers.
I deployed the application to the Cluster. (Ie. both Managed 1 and Managed Server 2.)
I am geeting the following JMS destination not found exception while starting the Second Managed Server.
There are no errors occurred in the First Managed Server.
{color:#ff0000}<Warning> <EJB> <BEA-010061>
<The Message-Driven EJB: SysAuditLogger is unable to connect to the JMS destination: topic/efpAuditTopic.
The Error was: weblogic.jms.common.JMSException: could not find Server efpserver_man2
Nested exception: weblogic.jms.common.JMSException: could not find Server efpserver_man2
Nested exception: weblogic.jms.common.JMSException: could not find Server efpserver_man2
Nested exception: weblogic.jms.common.JMSException: could not find Server efpserver_man2
Nested exception: weblogic.messaging.dispatcher.DispatcherException: could not find Server efpserver_man2
Nested exception: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.messaging.dispatcher.S:efpserver_man2.
Resolved 'weblogic .messaging.dispatcher'; remaining name 'S:efpserver_man2>{color}
Configuration Details:
##config.xml:
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/security/wls [http://www.bea.com/ns/weblogic/90/security/wls.xsd] [http://www.bea.com/ns/weblogic/920/domain] [http://www.bea.com/ns/weblogic/920/domain.xsd] [http://www.bea.com/ns/weblogic/90/security/xacml] [http://www.bea.com/ns/weblogic/90/security/xacml.xsd] [http://www.bea.com/ns/weblogic/90/security] [http://www.bea.com/ns/weblogic/90/security.xsd]">
<name>efpdomain</name>
<domain-version>10.3.0.0</domain-version>
<security-configuration>
<name>efpdomain</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>{3DES}hcdd+yZGXk5DHgRKqCM7E86l4+VxPcZ9Ut7rB6WaXqMyvbtDjDUKNCKbMQdCN/BEYCv5E0N4Hms9kntfqhaduDO1WGMtbmJL</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>{3DES}Q2xO0EiChbay/HkRiorTjg==</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<listen-address>192.168.12.240</listen-address>
</server>
<server>
<name>efpserver_man1</name>
<listen-port>8011</listen-port>
<cluster>efpcluster</cluster>
<listen-address>192.168.12.240</listen-address>
<xml-registry>XMLEFP</xml-registry>
<jta-migratable-target>
<user-preferred-server>efpserver_man1</user-preferred-server>
<cluster>efpcluster</cluster>
</jta-migratable-target>
</server>
<server>
<name>efpserver_man2</name>
<listen-port>8012</listen-port>
<cluster>efpcluster</cluster>
<listen-address>192.168.12.240</listen-address>
<xml-registry>XMLEFP</xml-registry>
<jta-migratable-target>
<user-preferred-server>efpserver_man2</user-preferred-server>
<cluster>efpcluster</cluster>
</jta-migratable-target>
</server>
<cluster>
<name>efpcluster</name>
<cluster-address>192.168.12.240:8011,192.168.12.240:8012</cluster-address>
<multicast-address>239.192.0.0</multicast-address>
</cluster>
<embedded-ldap>
<name>efpdomain</name>
<credential-encrypted>{3DES}q/XQGirHcAcgi4iwPiXIkRHP8xte4xVBgJwjM+qMwbk=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.0.0</configuration-version>
<app-deployment>
<name>efp</name>
<target>efpcluster</target>
<module-type>ear</module-type>
<source-path>applications\efp.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<xml-registry>
<name>XMLEFP</name>
<document-builder-factory>weblogic.apache.xerces.jaxp.DocumentBuilderFactoryImpl</document-builder-factory>
<sax-parser-factory>weblogic.apache.xerces.jaxp.SAXParserFactoryImpl</sax-parser-factory>
<transformer-factory>weblogic.apache.xalan.processor.TransformerFactoryImpl</transformer-factory>
</xml-registry>
<jms-server>
<name>eFpJMSServer</name>
<target>efpserver_man1 (migratable)</target>
<persistent-store>eFpJMSJDBCStore</persistent-store>
</jms-server>
<jms-server>
<name>eFpJMSServer2</name>
<target>efpserver_man2 (migratable)</target>
<persistent-store>eFpJMSJDBCStore2</persistent-store>
</jms-server>
<migratable-target>
<name>efpserver_man1 (migratable)</name>
<notes>繧キ繧ケ繝・Β逕滓・縺ォ繧医k繝・ヵ繧ゥ繝ォ繝医・繧オ繝シ繝千畑遘サ陦悟庄閭ス蟇セ雎。縺ァ縺吶よ焔蜍輔〒蜑企勁縺励↑縺・〒縺上□縺輔>縲・/notes>
<user-preferred-server>efpserver_man1</user-preferred-server>
<cluster>efpcluster</cluster>
</migratable-target>
<migratable-target>
<name>efpserver_man2 (migratable)</name>
<notes>繧キ繧ケ繝・Β逕滓・縺ォ繧医k繝・ヵ繧ゥ繝ォ繝医・繧オ繝シ繝千畑遘サ陦悟庄閭ス蟇セ雎。縺ァ縺吶よ焔蜍輔〒蜑企勁縺励↑縺・〒縺上□縺輔>縲・/notes>
<user-preferred-server>efpserver_man2</user-preferred-server>
<cluster>efpcluster</cluster>
</migratable-target>
<jdbc-store>
<name>eFpJMSJDBCStore</name>
<prefix-name>WLJMS_</prefix-name>
<data-source>eFpNonXADataSource</data-source>
<target>efpserver_man1 (migratable)</target>
</jdbc-store>
<jdbc-store>
<name>eFpJMSJDBCStore2</name>
<prefix-name>WLJMS2_</prefix-name>
<data-source>eFpNonXADataSource</data-source>
<target>efpserver_man2 (migratable)</target>
</jdbc-store>
<jms-system-resource>
<name>eFPJMS</name>
<target>efpcluster</target>
<sub-deployment>
<name>eFPServer</name>
<target>eFpJMSServer</target>
</sub-deployment>
<sub-deployment>
<name>eFPServer2</name>
<target>eFpJMSServer2</target>
</sub-deployment>
<descriptor-file-name>jms/efpjms-jms.xml\JMS Description-jms.xml</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>eFpDataSource</name>
<target>efpcluster</target>
<descriptor-file-name>jdbc/eFpDataSource-2004-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>eFpNonXADataSource</name>
<target>efpcluster</target>
<descriptor-file-name>jdbc/eFpNonXADataSource-6172-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
</domain>
##JMS Description-jms.xml
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-jms xmlns="http://www.bea.com/ns/weblogic/weblogic-jms" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-jms [http://www.bea.com/ns/weblogic/weblogic-jms/1.0/weblogic-jms.xsd]">
<connection-factory name="ConnectionFactory">
<default-targeting-enabled>true</default-targeting-enabled>
<jndi-name>jms/ConnectionFactory</jndi-name>
<security-params>
<attach-jmsx-user-id>false</attach-jmsx-user-id>
</security-params>
</connection-factory>
<connection-factory name="XAConnectionFactory">
<default-targeting-enabled>true</default-targeting-enabled>
<jndi-name>jms/XAConnectionFactory</jndi-name>
<transaction-params>
<transaction-timeout>3600</transaction-timeout>
<xa-connection-factory-enabled>true</xa-connection-factory-enabled>
</transaction-params>
<security-params>
<attach-jmsx-user-id>false</attach-jmsx-user-id>
</security-params>
</connection-factory>
<uniform-distributed-queue name="ActiveActivityQueue">
<default-targeting-enabled>true</default-targeting-enabled>
<jndi-name>queue/efpActiveActivityQueue</jndi-name>
<load-balancing-policy>Round-Robin</load-balancing-policy>
<forward-delay>-1</forward-delay>
<reset-delivery-count-on-forward>true</reset-delivery-count-on-forward>
</uniform-distributed-queue>
<uniform-distributed-topic name="AdminTopic">
<default-targeting-enabled>true</default-targeting-enabled>
<jndi-name>topic/efpAdminTopic</jndi-name>
<load-balancing-policy>Round-Robin</load-balancing-policy>
</uniform-distributed-topic>
<uniform-distributed-topic name="AuditTopic">
<default-targeting-enabled>true</default-targeting-enabled>
<jndi-name>topic/efpAuditTopic</jndi-name>
<load-balancing-policy>Round-Robin</load-balancing-policy>
</uniform-distributed-topic>
<uniform-distributed-topic name="ErrorTopic">
<default-targeting-enabled>true</default-targeting-enabled>
<jndi-name>topic/efpErrorTopic</jndi-name>
<load-balancing-policy>Round-Robin</load-balancing-policy>
</uniform-distributed-topic>
<uniform-distributed-topic name="FreeTextTopic">
<default-targeting-enabled>true</default-targeting-enabled>
<jndi-name>topic/efpFreeTextTopic</jndi-name>
<load-balancing-policy>Round-Robin</load-balancing-policy>
</uniform-distributed-topic>
<uniform-distributed-topic name="ReportingTopic">
<default-targeting-enabled>true</default-targeting-enabled>
<jndi-name>topic/efpReportingTopic</jndi-name>
<load-balancing-policy>Round-Robin</load-balancing-policy>
</uniform-distributed-topic>
</weblogic-jms>
-----Getting the following exception while trying to connect the JMS destination I am using weblogic 10.3.3 connecting to oracle AQ. The config has been done as per the 'Interoperating with Oracle AQ JMS' document from oracle. I could see that while deploying the application the number of connections in the database increasing to 15 and getting the following error message.
<Jun 15, 2011 4:14:29 PM EDT> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: SampleEJBBean is unable to connect to the JMS destination: jms/propQueue. Th
e Error was:
oracle.jms.AQjmsException: Internal error: Cannot obtain XAConnection weblogic.c
ommon.resourcepool.ResourceLimitException: No resources currently available in p
ool TestDataSource to allocate to applications, please increase the size of the
pool and retry..
at weblogic.common.resourcepool.ResourcePoolImpl.reserveResourceInternal
(ResourcePoolImpl.java:555)
at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(Resourc
ePoolImpl.java:332)
at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(Resourc
ePoolImpl.java:322)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:438)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:317)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(Connectio
nPoolManager.java:93)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(Connectio
nPoolManager.java:61)
at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:
1670)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
468)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:355)
at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:566)
at oracle.jms.AQjmsXAConnection.createXAQueueSession(AQjmsXAConnection.j
ava:214)
at weblogic.ejb.container.internal.JMSConnectionPoller.setUpQueueSession
s(JMSConnectionPoller.java:1545)
at weblogic.ejb.container.internal.JMSConnectionPoller.createJMSConnecti
on(JMSConnectionPoller.java:2047)
at weblogic.ejb.container.internal.JMSConnectionPoller.connect(JMSConnec
tionPoller.java:787)
at weblogic.ejb.container.internal.MDConnectionManager.startConnectionPo
lling(MDConnectionManager.java:244)
at weblogic.ejb.container.manager.MessageDrivenManager.start(MessageDriv
enManager.java:584)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.mdManagerSt
art(MessageDrivenBeanInfoImpl.java:1334)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.deployMessa
geDrivenBeans(MessageDrivenBeanInfoImpl.java:1314)
at weblogic.ejb.container.deployer.EJBDeployer.deployMessageDrivenBeans(
EJBDeployer.java:1669)
at weblogic.ejb.container.deployer.EJBDeployer.start(EJBDeployer.java:14
93)
at weblogic.ejb.container.deployer.EJBModule.start(EJBModule.java:614)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(Module
ListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleSta
teDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:43)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStat
eDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartMod
ulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.ja
va:1269)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:43)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.
java:409)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleM
oduleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.activate(Deploym
entStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(Ap
pContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.ac
tivate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.ac
tivateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.do
Commit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.co
mmit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploym
entCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeplo
ymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(
DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.com
mit(DeploymentServiceDispatcher.java:164)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallb
ackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallb
ackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallb
ackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) -
Maximum number of connection supported by weblogic
Hello,
In our current applicatin we are using weblogic 7.0 as the app server and Oracle 9i as the db server.
The problem is the system is running out of connection frmo the connection pool very frequently, it is because of increase in the number of users,So far we have the maximum number of connectin capacity in the weblogic connection pool is 159default value). We thought of increasing the connection as an immediate solution.
Would like to know what is the maximum value that can be set as max connection attirubute.Does weblogic gives any restriction about max number of connection in the pool or the db server decides?
Can any you please provide maximum what value we can set for both weblogic as well as oracle.
Any help would be appreciated.
Thanks
ViswaPlease go through the below link:
https://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).aspx#SSAS
Support for Windows Server 2012 was added in a cumulative update for SQL Server 2008 SP3. Although Windows Server 2012 supports 64
physical processors and 640 logical processors, not all of the SQL Server 2008 or 2008 R2 services were retrofitted to support the additional processing capability of Windows Server 2012. Specifically, Analysis Services does not support more than 64 logical
processors in either SQL Server 2008 or SQL Server 2008 R2.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped.
[Blog] -
We have 5 devices connected to the same apple ID. My kids want to text from their iPod but when they do, it shows up on their friends devices that it was sent from my email or cell phone #. Is there anyway to fix this?
See:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
You will also have to uncheck your phone number is Settings>Messages>Send and Receive. You can't delete the phone nunber since it associated with your yur accounbt whch has the phone. -
Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
Thanks for your help.The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.
-
i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!
Did you remove your account information from the other person's iPhone?
-
I followed the trouble-shooting steps for this issue, to no avail (Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC). The back story is that I was an independent contractor working for a company and had my own CreativeCloud account. I've since been hired and my boss has opted to purchase a license for Acrobat instead of a CC subscription. He bought the license a few months back, right around the time I cancelled my subscription. But now, the machine I have been using this whole time (PC, Windows 7) is saying I need to renew my subscription when I attempt to run Acrobat. When I click the links, 'Subscription Manager' or 'Have a different Adobe ID?', I get a spinning wheel that eventually times out and tells me 'Please connect to the internet and retry'. At one point I uninstalled the program and reinstalled it, at which point it asked me for a serial number, which I have. I entered the number and as it was trying to verify, it timed out and gave me the same 'Renew your subscription' message.
Any help would be greatly appreciated. This has been very frustrating.Hello - Is the issue still pending
-
Application module with no connection to the database in jdeveloper 10.1.3
I have a number of programmatic bc view objects and entity objects which i have implemented through the time from different projects and now that i have collected them i want to add all of them in a reusable application module. However i don't need a connection to the database for this application module. Is it possible to enforce the application module to circumvent the db connection?
Hi user,
Just out of curiosity, why would you use ADF BC for that - if I had a bunch of non-db data sources, I'd probably use POJOs and create POJO data controls.
I didn't look in 10g, but in 11g, the ApplicationModule has a method called getDBConnectionRequired() that you could override to see if that solves your issue.
John -
Error connecting to the BPEL server from JDeveloper
My student asks about an error she gets while trying to test a connection defined in JDeveloper to a mid-tier BPEL PM. She gets one error the first time the connection is tested, another at second and subsequent tests.
The following error I get only the first time I test connection:
org.apache.soap.SOAPException:Unsupported response content type "text/html", must be: "text/xml". Response was:
<HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal
Server Error</H1><PRE>java.lang.NoClassDefFoundError<br> at oracle.tip.pc.services.TestConnection.&lt;init&gt;(TestConnection.java:68)<br> at oracle.tip.pc.services.__TestConnectionStatelessWrapper.init(__TestConnectionStatelessWrapper.java:39)<br> at oracle.j2ee.ws.InvocationWrapper.init(InvocationWrapper.java:81)<br>
; at oracle.j2ee.ws.RpcWebService.getWrapper(RpcWebService.java:533)<br> at oracle.j2ee.ws.RpcWebService.doPost(RpcWebService.java:205)<br> at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)<br> at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)<br> at
com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)<br> at
com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)<br> at
com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)<br>
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)<br>
at
com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)<br> at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)<br>
at java.lang.Thread.run(Thread.java:534)<br></PRE></BODY></HTML>
The following error I get from the second time I test connection
org.apache.soap.SOAPException:java.lang.NullPointerException at oracle.tip.pc.services.__TestConnectionStatelessWrapper.invokeMethod(__TestConnectionStatelessWrapper.java:146)Hi,
Did you check whether Test Connection is giving success message from your JDeveloper ? if not then it will show you where exactly the problem is.
As at the end you are getting the error :- #### Invalid Oracle Home directory
so please check once again for your directory path (it could be case sensitive) where you are trying to deploy.
Thanks
<Neeraj Sidhaye/>
Try_Catch_Finally AT YAHOO DOT COM
http://ExtremePortal.blog.co.uk -
When I try to activate my cs 3 premium production, I get a message saying NO CONNECTION. Everything is in order though. How can I get an activatioon number other then trough the web??
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Maybe you are looking for
-
Help with provide statement In ABAP HR
Hi to all experts, My requirement is to display locked records with start date and end date But the problem when i select the period as current month im getting the start date of the current month and enddate of the current month PROVIDE * FROM p000
-
I've installed the most recent driver from HP. Can get some of the printer's functionality but cannot print colors. Not sure if I'm missing a setting or if it is a problem with the HP driver for Leopard (as I've seen in other posts). Printer is conne
-
Open PDF in Preview - automatically in front of other PDF files?
I'm really fond of the 'open PDF in Preview' option in Safari. However, I have noticed that when a pdf file is already open in Preview before downloading a new one, the new one does not automatically come in front of the one that was already open; in
-
Backup BOE XI 3.1 - BIAR file
Hello, I'm trying to backup all BusinessObjects objects to performance contingency. I'd like to create a BIAR file using the "BIAR Command Line Tool", but I have some problems. Could anyone tell me a correct sentence for "exportQuery" (included in .p
-
Onscreen font size for "spell check" and "font"
How do I increase the onscreen font size for "spell check" and "font"? I just tried to spell check a document and the font size was so small I can't see what it says. Also, when you click on 'font' to change it, I wish the list of fonts was larger so