Number of CPU Count

Dear all;
This is regarding Solaris v10 x86 AMD64
Can anybody tell me that by default free downloaded o/s supports maximum how much CPU count.
And ref. document link for the same.
Devang Modi

In the forthcoming version of J2SDK 1.5 there will be a package named java.lang.management, and an interface called OperatingSystemMXBean. One of its methods returns the number of CPUs available to the instance of the JVM running.
It depends on the processor count reported by the operating system. If you have a Pentium 4 with hyperthreading enabled your operating system reports 2 "logical" CPUs although you know that you have just only a physical CPU chip in your machine. As I haven't tested the "getAvailableProcessors" method in a HT machine I can't say exactly the result, if the getAvailableProcessors returns the number of logical CPUs or physical CPUs.
(Obviously if you have a machine with 32 CPUs but you're running in a "domain" or a "virtual machine" that do not expose all CPUs to your process, or if some of the CPUs are disabled (it's a common fact among IBM server machines - the CPU chips are physically present, but don't work - just pay for the additional CPUs and they will unlock them), the JVM will report a smaller number. It depends in the hardware.)
public interface OperatingSystemMXBeanThe management interface for the operating system on which the Java virtual machine is running.
A Java virtual machine has a single instance of the implementation class of this interface. This instance implementing this interface is an MXBean that can be obtained by calling the ManagementFactory.getOperatingSystemMXBean() method or from the platform MBeanServer method.
int getAvailableProcessors()
Returns the number of processors available to the Java virtual machine.

Similar Messages

  • Flash Media Server 3.5/number of CPU

    How many number of CPU cores Flash Media Server 3.5 supports?

    Hi,
    You could refer to the EULA located at the FMS install directory/License.htm.
    So in short to install FMSS you could use up to 4 CPUs and to install FMIS you are allowed to use upto 8 CPUs.
    The section 2.8.5 states:
    2.8.5.         License Limit.  Licensee shall only use the Software corresponding to the licenses for the Software that Licensee has purchased.  Licensee is permitted to install the Streaming Server on a single Computer or Virtual Server containing up to 4 CPUs. Licensee is permitted to install the Interactive Server on a single Computer or Virtual Server containing up to 8 CPUs.  In the event that Virtual Servers are installed on a Computer, each such Virtual Server shall be deemed to operate the Software on 2 CPUs (each, a “Virtual Server CPU”), and the total number of Virtual Server CPUs plus the total number of physical CPUs on such Computer, shall be counted together for the purpose of applying the limitations set forth in this Agreement. For all the Software licensed hereunder, if Licensee exceeds the limitations set forth herein on a single Computer or Virtual Server Licensee must purchase another license to the Software, and such additional license shall permit up to permitted number of additional CPUs (including Virtual Server CPUs) in such Computer or Virtual Server.
    Thanks
    Mamata

  • How to get total number of result count for particular key on cluster

    Hi-
    My application requirement is client side require only limited number of data for 'Search Key' form total records found in cluster. Also i need 'total number of result count' for that key present on the custer.
    To get subset of record i'm using IndexAwarefilter and returning only limited set each individual node. though i get total number of records present on the individual node, it is not possible to return this count to client form IndexAwarefilter (filter return only Binary set).
    Is there anyway i can get this number (total result size) on client side without returning whole chunk of data?
    Thanks in advance.
    Prashant

    user11100190 wrote:
    Hi,
    Thanks for suggesting a soultion, it works well.
    But apart from the count (cardinality), the client also expects the actual results. In this case, it seems that the filter will be executed twice (once for counting, then once again for generating actual resultset)
    Actually, we need to perform the paging. In order to achieve paging in efficient manner we need that filter returns only the PAGESIZE records and it also returns the total 'count' that meets the criteria.
    If you want to do paging, you can use the LimitFilter class.
    If you want to have paging AND total number of results, then at the moment you have to use two passes if you want to use out-of-the-box features because LimitFilter does not return the total number of results (which by the way may change between two page retrieval).
    What we currently do is, the filter puts the total count in a static variable and but returns only the first N records. The aggregator then clubs these info into a single list and returns to the client. (The List returned by aggregator contains a special entry representing the count).
    This is not really a good idea because if you have more than one user doing this operation then you will have problems storing more than one values in a single static variable and you used a cache service with a thread-pool (thread-count set to larger than one).
    We assume that the aggregator will execute immediately after the filter on the same node, this way aggregator will always read the count set by the filter.
    You can't assume this if you have multiple client threads doing the same kind of filtering operation and you have a thread-pool configured for the cache service.
    Please tell us if our approach will always work, and whether it will be efficient as compared to using Count class which requires executing filter twice.
    No it won't if you used a thread-pool. Also, it might happen that Coherence will execute the filtering and the aggregation from the same client thread multiple times on the same node if some partitions were newly moved to the node which already executed the filtering+aggregation once. I don't know anything which would even prevent this being executed on a separate thread concurrently.
    The following solution may be working, but I can't fully recommend it as it may leak memory depending on how exactly the filtering and aggregation is implemented (if it is possible that a filtering pass is done but the corresponding aggregation is not executed on the node because of some partitions moved away).
    At sending the cache.aggregate(Filter, EntryAggregator) call you should specify a unique key for each such filtering operation to both the filter and the aggregator.
    On the storage node you should have a static HashMap.
    The filter should do the following two steps while being synchronized on the HashMap.
    1. Ensure that a ConcurrentLinkedQueue object exists in a HashMap keyed by that unique key, and
    2. Enqueue the total number count you want to pass to the aggregator into that queue.
    The parallel aggregator should do the following two steps while being synchronized on the HashMap.
    1. Dequeue a single element from the queue, and return it as a partial total count.
    2. If the queue is now empty, then remove it from the HashMap.
    The parallel aggregator should return the popped number as a partial total count as part of the partial result.
    The client side of the parallel aware aggregator should sum the total counts in the partial result.
    Since the enqueueing and dequeueing may be interleaved from multiple threads, it may be possible that the partial total count returned in a result does not correspond to the data in the partial result, so you should not base anything on that assumption.
    Once again, that approach may leak memory based on how Coherence is internally implemented, so I can't recommend this approach but it may work.
    Another thought is that since returning entire cached values from an aggregation is more expensive than filtering (you have to deserialize and reserialize objects), you may still be better off by running a separate count and filter pass from the client, since for that you may not need to deserialize entries at all, so the cost on the server may be lower.
    Best regards,
    Robert

  • How to include Batch Number in Inventory Counting and Print Countsheet

    Hi,
    Could someone let us know how to include the batch number from Inventory Counting and include them in the count sheet when printed?
    Thank you!
    Ramon

    Hi Pam......
    Try this and modify as you want......
    SELECT Distinct T3.[DocDate], T0.[ItemCode], T2.[ItemName], T2.[BatchNum], T0.[Quantity],
    T0.[DocEntry], T0.Price, (T0.Price*T0.[Quantity]) As 'Total'
    FROM PDN1 T0  inner join OIBT T2 on T2.ItemCode=T0.ItemCode and T2.BaseEntry=T0.DocEntry
    INNER JOIN OPDN T3 ON T0.DocEntry = T3.DocEntry
    WHERE T2.[BaseType]=20 and T2.[Direction]=0
    Regards,
    Rahul

  • How can I get the number request's (count) for One interface

    Hi Guru's,
    I have a requirement,One interface say Hello world._How can I get the number request's (count) for this interface_.I thing with BAM it's possible.
    But I have no idea about BAM.If is there any alternative please give directions and instruction how to achieve this task.
    Can any body help.Thanks in advance.
    Regards
    Mani

    You have to query the SOA_INFRA schema to get the answer.
    Build a select query in cube_instance table.
    Thanks,
    Vijay

  • Sliding Panels: displaying active panel number, total panel count, etc.

    I have an XML-generated Sliding Panels widget. How do I fetch the active panel number, total panel count, and disable Previous/Next buttons based on panel's place in the sequence?
    In other words:
    Panel 1 of 3   |   < Previous (disabled)   |   Next >
    Panel 1 (active)
    Panel 2
    Panel 3

    I've not seen an example of exactly what you're trying to do, but take a look at the code for this page:
    http://labs.adobe.com/technologies/spry/samples/slidingpanels/SlidingPanelsFromData.html
    It dynamically builds up the sliding panel from data and dynamically creates the list of numbered links based upon the number of panels.
    In a quick look, there isn't a method of the Sliding panel object which tells you the index of the current panel, but you can get that by calling getCurrentPanel() and then loop over the panels which you can obtain by getContentPanels() and checking against each panel to see if it is the current panel and then that's the index of your current panel. From there you can set the "(active)" label and enable and disable the previous and next buttons, if you're at index 0, then disable previous and if your at getContentPanelsCount()-1  then you're at the end.

  • Log_buffer vs CPU counts

    Oracle 10g. Per theory, on Windows, if CPU_count=1, log_buffer is 256K. the software company installed database for us with CPU_count=1, but log_buffer=2.7M. Is this normal? What impact?
    Appreciate any help.
    Thanks
    S.

    CPU_COUNT is automatically set by Oracle based on how many CPU Cores it "sees" when it queries the OS at instance startup. If the OS reports 1 CPU Core only to Oracle, Oracle would set cpu_count to 1.
    Check the actual number of CPU Cores on your server.
    Ensure that your vendor did not configure cpu_count to 1 explicitly.
    NOTE : If you are using Oracle 10g Express Edition (10gXE), it will use only 1 CPU. That is hard coded in the software.
    As for LOG_BUFFER, please see the MyOracleSupport/MetaLink note 604351.1. Oracle uses an "internal" algorithm to automatically set LOG_BUFFER.
    Hemant K Chitale

  • More CPU counter info needed.

    Hi,
    I would like to know how to go about doing the %wait %idle %system %user
    states of the cpu counter. Can you please tell me about the calculation
    involved? Thanks in advance,
    Charulatha.
    Note: Thanks to all those who have replied to my earlier posts.

    Hi,
    I am calculating cpu percent as follows
    (idletime/totaltime)*100
    where totaltime = idletime+waitime+usertime+kerneltime
    on a loop eachtime I am deducting with the previous reading for each of 'time' value
    for example
    idletime = idletime - previdletime;
    previdletime = idletime;
    and the same way to all of 'time' values
    but the percentage that I am getting is between 90 - 99. In real they look like incorrect. I know that there may be a small catch here. Can you please help me out. I am new to Unix. Futher can you please tell me how to test this program, ie., how do I makesure that the values I am getting are right. Shall I run performance meter and compare those with the values that I am getting?
    Thanks is advance.
    Ram

  • How to size number of cpu after physical to container?

    Dear all,
    I am new to Solaris container. Now I plan to migrate several old solaris  host such as E4900 running solaris 9.
    Consolidating them into solaris 9 containers running in SPARCT4-4.
    Sun Fire E4900  Sun Sparc  16cpu 1375MHz
    New T4 4 x T4 cpu (each cpu 8 core, each core 8 thread) => 256 vpcu, each running 3GHz
    It does not make sense that we assign 16 cores of T4 to new solaris 9 container. And E4900 and T4-4 are different CPU models. How can I match them?
    Have any one good idea upon this?
    Many thanks,
    Mike Tang

    what type of workload do you have from the old system side?  lots of single threaded apps?  db server?  some of how you could size it may depend on licensing models, if any, you may have to deal with.  some restrict based on cpu count/core count/socket count so that can quickly make your target cpu assignment.
    example we had: sun 280r to a zone on a t4-2.  capped the cpus for the zone based on our oracle licensing from the old sys.

  • Detecting number of cpu from kernel

    Hi, how do I detect the number of cpu in kernel mode?

    This prints the number of procs.
    main()
    long procs;
    procs = sysconf( SCNPROCESSORS_CONF );
    printf("Processors Configured =%d\n", procs);
    procs = sysconf( SCNPROCESSORS_ONLN );
    printf("Processors Online =%d\n", procs);

  • Changes in CPU count ..

    hello,
    I am working on Oracle 10.2.0.5 running on sun solaris o/s.
    Past few days i am getting following messages in alert log file.Performance degradtion is also reported so need to investigate if this can casue.
    current cpu_count=5 parameter seted in pfile.
    I checked on internet but have not got cause of this issue.
    Any idea ... how to resolve this.
    Thu Feb 23 10:59:42 EST 2012
    Detected change in CPU count to 1
    Thu Feb 23 10:59:42 EST 2012
    RM cpu_count => Low Server Threshold (1) : High Server Threshold (3)
    Thu Feb 23 11:02:45 EST 2012
    Detected change in CPU count to 2
    Thu Feb 23 11:02:45 EST 2012
    RM cpu_count => Low Server Threshold (2) : High Server Threshold (4)
    Thu Feb 23 11:04:48 EST 2012
    Detected change in CPU count to 1
    Thu Feb 23 11:04:48 EST 2012
    RM cpu_count => Low Server Threshold (1) : High Server Threshold (3)

    Hi;
    Please see:
    Detected Change In Cpu Count To 9 Detected Change In Cpu Count To 10 [ID 1294044.1]
    'Detected change in CPU count' Message in Alert.log [ID 1071213.1]
    Regard
    Helios

  • Data Load : Number of records count

    Hi Experts,
              I want to document number of records transferred to BW during an infopackage execution.
              I want to automate the process by running a report in background which will fetch a data from SAP tables about number of records been transfered by all my InfoPackage .
    I would like to know how should I proceed with.
             I want to know some System tables which contains same data as that of RSMO transaction displays to us.
    Kindly help with valuable replies.

    HI,
    inorder to get the record counts report you need to create a report based on below tables
    rsseldone, rsreqdone, rsldpiot, rsmonfact
    Check the below link which explain in detail with the report code as well.
    [Data load Quick Stats|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90215bba-9a46-2a10-07a7-c14e97bdb764]
    This doc also explains how to trigger a mail with the details to all.
    Regards
    KP

  • How can i check cpu count in my server?

    Hi,
    Can anybody help me how to find the number of CPUs in my server?
    Thanks a lot for ur help
    santhosh

    Re: How many CPU are connected to our server?

  • How to exclude last page from the total number of pages counter

    Hi,
    I am customizing the payables remittance RTF template, our requirement is to reset page number to 1 for each payment, i am able to achieve this using "@section"
    also we have a requirement to have a summary page at the end, i am able to get this using "start@last-page:body".
    issue is last page is also considered in the page counter of the last payment.
    i.e. suppose if i am generating remittance for 2 payments which are printing details in two pages and one page respectively, my output will have total 4 pages and it's showing
    Payment1 page-1 footer -> 1 of 2
    Payment1 page-2 footer -> 2 of 3
    Payment2 page-3 footer -> 1 of 2
    Summary page-4 footer -> 2 of 2
    but i wanted to see
    Payment1 page-1 footer -> 1 of 2
    Payment1 page-2 footer -> 2 of 3
    Payment2 page-3 footer -> 1 of 1
    Summary page-4 footer -> 1 of 1
    Any idea how to remove the summary page from the page counter.
    Rgds,
    -Kamal

    I'm not sure how it was in Acrobat 9, but in XI you add a Header/Footer and
    one of the options it "Page Number and Date Format", where you can select
    the format of the page number to add, some of them contain the total number
    of pages (such as "1 of n").

  • [Win VC++ 6.0 ]How to get the number of files count in a folder using VC++ 6.0?

    Hi all,
    Can any one tell how to get the number of files(.EPS) count inside a folder when the folder path is specified in VC++ 6.0?
    Thanks in Advance.
    Regards
    myriaz

    I'm a little confused by the question, but it sounds like you're asking how to count the number of files with a particular extension in a given directory? That's not really an AI SDK question, but it's a fairly easy one to find if you google it. If you're trying to use Illustrator to do it, AI doesn't have a general purpose file API. It has a few functions to do some things that Illustrator needs, but I don't think enumerating directories is one of them.

Maybe you are looking for