Number of items in LOV
We have predefend LOVs in Shared Items, based on query.
We would like to create some processing regarding number of items in that predefined LOV, but not to repeat Query that create it, but to call some htmldb_item or so function to retrieve number of items .
THX!
SUppose that LOV has null values and ... values from query.
In a case that there query return only one value, we'd like to define that LOV is showing automatically first value...not to vait that user choose it...because user can choose only that value.
Because our LOV's are defined in shared items, we do not want to re-query LOV's query to retrieve number of items but to use something that depend on LOV's real number of items.
So we'd like to set the value for cases like that.
P.S.
This may be a nice request on wish list: LOV that have checkbox in design mode, which will make first item default in a case when LOV show null items and number of query items are two.
Hope this was clear
Similar Messages
-
How to Populate a List item with LOV'S
How to Populate a list of items with Lov's
and then how to dynamically change the Values of one LIST Item
Based on the Value of anothe List item976798 wrote:
--Hello..I want to ask that How to bind a list item with table values? this below code does not populate items from database to list item.Pls any body give me solution.
declare
group_id RecordGroup;
list_id Item:=Find_Item('LST_CLASS');
status number;
begin
group_id:=Create_Group_From_Query('Answer_List','select CLASS_ID,CLASS_NM from CLASS_MSTR');
status:=Populate_Group('Answer_List');
message(to_char(status));
Populate_List(list_id,group_id);
end;Welcome to the Oracle Forums. Please take a few minutes to review the following:
<ul>
<li>Oracle Forums FAQ
<li>Before posting on this forum please read
<li>10 Commandments for the OTN Forums Member
<li>How to ask questions the smart way
</ul>
Following these simple guidelines will ensure you have a positive experience in any forum; not just this one!
Check this link: How to Dynamically Populate a Pop List ?
Hope this helps
Hamid
If someone's response is helpful or correct, please mark it accordingly. -
How to restrict number of items in billing documents
hi,
is there any procedure for restricting number of items in sales order level or any document level.
regards,
balaHi,
You have to maintain the following in addition to our Guru,s reply
You must also go to copying control for order/delivery to billing document at item level under "Data VBRK/VBRP" and maintain routine 006 "individual invoice limited" or a similar routine that accesses the data maintained here.
then it will work.
Regards,
Ravi Duggirala -
We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
"I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
tests using troubleshooting scripts find no issues with search indexer,
[PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
Get-EventLog : No matches found
At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
+ $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
-eq $msftesqlCrashEventId}
+ CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
+ FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
Name IsDeadLocked CatalogStatusArray
SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
[PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
[PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
Server Database ServerGuid ResultFound SearchTimeInSeconds Error
SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.Hi IAMChrisL,
Any updates?
Frank Wang
TechNet Community Support -
Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
ThanksThanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying. -
RESTORE 'NUMBER OF ITEMS' AND 'SPACE AVAILABLE' IN OPEN WINDOW
something we seem to have lost in LION is the useful number of items and memory avail or used
at the bottom of windows/drive windows. any way to restore?Open the Finder menu and set the options:
Finder -> View -> Show Status Bar
and
Finder -> View -> Show Path Bar
and you will see this information again
HTH
Léonie -
How to send Sales Document Number and Item to BAPI_ACC_DOCUMENT_POST?
Hello SAPients,
We are using BAPI_ACC_DOCUMENT_POST to create an accounting document similar to what FB01 does, in FB01 you can type the number and position of a Sales Document even if you are using an Account Receivable account number. But in the BAPI, the ACCOUNTRECEIVABLE table doesn't have a field to include those numbers. How should I pass the sales order number and item to the BAPI? I have tried several things but every time I receive more complicated error messages.
Thank you in advance for your kind help.Let me know if you have any questions:
Loop through your records and fill in the appropriate structure based on record type (GL, Vendor or Customer)
IF NOT pcard_post_rec-zlsapac IS INITIAL.
gt_gl_item-itemno_acc = ls_posnr.
gt_gl_item-gl_account = pcard_post_rec-zlsapac.
gt_gl_item-comp_code = pcard_post_rec-zlsapco.
"gt_gl_item-pstng_date = pcard_post_rec-zlgpsdt.
gt_gl_item-pstng_date = gv_posting_date.
gt_gl_item-doc_type = doctype.
gt_gl_item-alloc_nmbr = ls_assignment.
gt_gl_item-ref_key_3 = pcard_post_rec-zlgvend.
IF pcard_post_rec-zlsapac < 500000.
gt_gl_item-item_text = ''.
ELSE.
gt_gl_item-item_text = pcard_post_rec-zlguser.
ENDIF.
gt_gl_item-costcenter = pcard_post_rec-zlsapcc.
gt_gl_item-orderid = lv_ordnum.
APPEND gt_gl_item.
ELSEIF NOT pcard_post_rec-zlsapven IS INITIAL.
gt_ap_item-itemno_acc = ls_posnr.
gt_ap_item-vendor_no = pcard_post_rec-zlsapven.
gt_ap_item-comp_code = pcard_post_rec-zlsapco.
gt_ap_item-alloc_nmbr = ls_assignment.
gt_ap_item-ref_key_3 = pcard_post_rec-zlgvend.
IF pcard_post_rec-zlsapac < 500000.
gt_ap_item-item_text = ''.
ELSE.
gt_ap_item-item_text = pcard_post_rec-zlguser.
ENDIF.
APPEND gt_ap_item.
ELSEIF NOT pcard_post_rec-zlsapcus IS INITIAL.
gt_ar_item-itemno_acc = ls_posnr.
gt_ar_item-customer = pcard_post_rec-zlsapcus.
gt_ar_item-comp_code = pcard_post_rec-zlsapco.
gt_ar_item-alloc_nmbr = ls_assignment.
gt_ar_item-ref_key_3 = pcard_post_rec-zlgvend.
IF pcard_post_rec-zlsapac < 500000.
gt_ar_item-item_text = ''.
ELSE.
gt_ar_item-item_text = pcard_post_rec-zlguser.
ENDIF.
APPEND gt_ar_item.
ENDIF. -
How can I view the number of items I have in a folder on Mac 10.9.2 (Mavericks)?
I have only been using Mac OS X 10.9.2 (Mavericks) for a little while so I'm having to deal with many inconveniences that I didn't have to face with Mac OS X 10.6.3 (Snow Leopard). It's frustrating that 10.9.2 (Mavericks) doesn't let me tap twice on the trackpad in order move or drag something, but at least I figured out how to do this in a different way. One part that I cannot figure out is how to view the number of files in each folder. With Snow Leopard, I was able to view the number of files on that folder automatically by looking at the bottom of the folder (*See the example on the photo). On the bottom of that folder, you will see the number of items, which it 10. Every time I add new files (or folders within that folder), it will update the number of items to the appropriate number. This is especially useful to me if I'm going to have many items within a folder and when I need to make sure that the number I have is exact. For example, sometimes I have to save files in a precise number and order. If I miss saving a file with a specific number, and I don't catch that the number of items is off as early as possible, I may have to waste time looking through files to try to figure out what is missing. For this reason, I have to find a convenient way to view the number of items in each folder with Mac OS 10.9.2 (Mavericks) or else using it will be a hassle.
Now that I'm using Mac OS X 10.9.2 (Mavericks), I don't see any information on the folder that tells me how many items are in it (*See photo below). I keep looking to see if it's located somewhere else on the folder or if I can change the folder preferences to make it become visible. I also clicked on the folder and on "Get Info" (which would be inconvenient if I had to do this constantly). This showed me the number of items in that folder but I can't always keep checking like this because it's time-consuming and distractive.
I need to find a way to make the number of items appear on the folder itself, while it is open.
Do you know a convenient way to view the number of items in a folder?
Is there some way I can change the preferences so that the number becomes visible on the folder itself?Open the Finder's View menu and choose 'Show Status Bar'.
(111921) -
In the OSB web gui, one of my users found that if the number of items per page is changed from the default of 30, the restore of the file will fail. He tested this using recent versions of Firefox and IE. We have verified this to also be the case using Chrome.
In a directory containing over 100,000 files, moving 30 at a time to find the one to be restored is a very frustrating user experience.
How do I file a bug report for this issue? Is there a workaround for this bug to enable my users to more easily find the file to restore without being restricted to the default of 30 items per page?Yes there is a bug in the webtool in the current release. You can use the commandline obtool to do the restore, that is much faster and works fine.
Thanks
Rich -
How to limit the number of items in a KPI Status list web part?
How to limit the number of items in a KPI Status list web part? There is no paging option for Business Category Status list or any limit can be made by changing the Item limit in default view unlike other SharePoint List web parts. So How to achieve it?
Kindly help.
Regards,
ZA
zzzSharePointHi,
According your post, I know you would like to set the item display limit in Status List web part.
In the web part, the number of items to display is based on the view which you selected when configuring the web part. The default view for status list is status list view.
However, I am not able to limit the items’ display number of the status list view. After changing the items limit, the list item displayed would not match the number specified by Item Limit. Thus, it is not possible to limit the number
of items in the Status list web part.
It could be a potential issue in SharePoint 2010.
We will log this issue to our suggestion box. As after the submission, we may not have any time guarantee when the fix may be released, but it may come out on next cumulative update.
Appreciate your time and efforts.
Thanks.
Tracy Cai
TechNet Community Support -
How to limit the number of items that a list control can hold?
Hi,
I am using a Flex3 List control for one of my projects.
I add drag & drop functionality to it, so that i can drag & drop elements from one control to another.
How to limit the number of items that a list control can hold / can be dropped in a list control ?
- Sen.1. Listen for the dragdrop event on the control you are dragging onto.
2. check the length of the items in the dataprovider - if it exceeds your maximum override the default drop action with e.preventDefault(); (assuming you used e for the event on the handler).
Regards,
Mark. -
To fill in the material number with item category u201CBu201D for Framework Order.
The use of framework orders (also referred to as blanket purchase orders) enables you to procure a variety of materials or services from a vendor up to a predefined maximum value (the value limit).
Instead of a specific delivery date, you specify a validity period for the order.
Goods receipts or the entry and acceptance of services performed are not necessary in the case of a framework PO and limit items.
The invoices are posted directly with reference to the purchase order, provided that the specified value limit is not exceeded. When the value limit of the PO is reached, or the validity period is exceeded, the system issues a warning message. It is possible to book the invoices, but these are blocked for payment.
During the phase of service performance, the cumulative u201Cactual" values (for the services actually performed) are continually updated in the underlying purchase. This enables you to monitor the progress of a procurement project on an ongoing basis. By comparing the "actual" value with the total value, you can always obtain an overview of the degree to which a budget for unplanned services or materials has been exhausted (i.e. see whether predefined limits have been reached or nearly reached).
So with the Framework Order type (FO) and item category u201CBu201D you get the error that it is not allowed to fill in the material number with item category u201CBu201D.
Please suggest me the possible solution to fill in the material number with item category u201CBu201D for Framework Order.
Best Regards,
HarishaThe Framework order type is specialy defined for lesser value procurements (ex: stationeries, cleaning services ....) which are all not worthy to create Material Master at all.
If you are very sure to fill the Material number, then proceed with some other document type.
In what circumstances you want to put material number in FO order?
Karthi. -
I have just updated to Lion and now my folders no longer show number of items on the bottom. Is there a fix for this? I allways found that handy. Now I have to click on an icon on the top, This is a backward step if that is now the only way to see the number of items. Am I missing something obvious?
Parrotcat wrote:
I have just updated to Lion and now my folders no longer show number of items on the bottom...
In the good old days of Snow Leopard, an open Finder folder had a border along the bottom of the window which could show the number of items in that window and the total available space on the hard disk or partition that folder resides on. That bottom border is gone in Lion and those two bits of information are gone with it. Is that what you're talking about? If so, I'd like to learn how to get it back too and "Show Item Info" is not the way. -
Restrict number of items in folder portlet
how can I restrict the number of items showed in a folder portlet?
i only want to display 15 items. And show a next link to view the others??????
Is this possible?
Thanks in advanceNo, there is no way around this limitatin at this time.
-
Does Anyone Know How to Display Number of Items in a Folder?
After "upgrading" to Lion, none of my folder display the number of items in the folder --a nice bit of information that was available in earlier versions of the operating system. Is there an automatic way to see that information? [I imagine there are other really inconvenient ways, but is there a nice CONVENIENT setting I haven't figured out?] THANKS.
From your View menu in Finder choose "Show status bar"
EDIT: Also there is QuickLook which is no longer on the toolbar of the Finder window but you can choose from "Customize Toolbar".
Maybe you are looking for
-
XLR - Incoming Payment - Open Balance field not found
I'm trying to build an aged debtors report in XLR and the last piece I need is the Open Balance (ORCT.OpneBal) on an Incoming Payment that was made on account. I've not been able to find this field in XLR. Does anyone know if its available from insid
-
Dynamically change JCO parameters
Hi guys, There is something extremely far-fetched I want to try. Using Web Dynpro, before making the RFC call, can i change/override some connection parameters of the JCO being used from the SLD. Any radical ideas???
-
Why we have only a little number of languages avaiable on Siri? I suggest on a new iOS version all of us could have much more languages avaiable and that helps a lot as many people are going to understand easily how Siri works and how helpful it is.
-
Hello, When i execute this command i get this: SQL> ALTER TABLE RMPM.GROUPE_AFFAIRES DROP PARTITION PART_71; ALTER TABLE RMPM.GROUPE_AFFAIRES DROP PARTITION PART_71 ERROR at line 1: ORA-04045: errors during recompilation/revalidation of RMPM.IDX_GA_L
-
Hi I am facing a broblem in select query. Its simple but dont know whats getting wrong. The query is as simple as below : SELECT * FROM zmm_rtm_fields_c INTO TABLE WS_RTM where zwerks = P_plant and CODDIS = p_matnr. The Z Table zmm_rtm_fields_c has