Numeric field total in ALV
Hi Experts,
I have one numeric field in ALV report, i want the subtotal of that numeric field, how i can do that.
IF i am using do_sum that is not working, it is giving interger fields total not numeric fields total?
Urgent,
useful reward points.....
Hi
i am sending a sample code for alv subtotals.you go through it.
REPORT z_alv_subtotal.
*& Table declaration
TABLES: EKKO.
*& Type pool declaration
TYPE-POOLS: SLIS. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: S_EBELN FOR EKKO-EBELN.
*& Type declaration
Type declaration for internal table to store EKPO data
TYPES: BEGIN OF X_DATA,
EBELN TYPE CHAR30, " Document no.
EBELP TYPE EBELP, " Item no
MATNR TYPE MATNR, " Material no
MATNR1 TYPE MATNR, " Material no
WERKS TYPE WERKS_D, " Plant
WERKS1 TYPE WERKS_D, " Plant
NTGEW TYPE ENTGE, " Net weight
GEWE TYPE EGEWE, " Unit of weight
END OF X_DATA.
*& Internal table declaration
DATA:
Internal table to store EKPO data
I_EKPO TYPE STANDARD TABLE OF X_DATA INITIAL SIZE 0,
Internal table for storing field catalog information
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
Internal table for Top of Page info. in ALV Display
I_ALV_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
Internal table for ALV Display events
I_EVENTS TYPE SLIS_T_EVENT,
Internal table for storing ALV sort information
I_SORT TYPE SLIS_T_SORTINFO_ALV,
I_EVENT TYPE SLIS_T_EVENT.
*& Work area declaration
DATA:
WA_EKKO TYPE X_DATA,
WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_EVENTS TYPE SLIS_ALV_EVENT,
WA_SORT TYPE SLIS_SORTINFO_ALV.
*& Constant declaration
CONSTANTS:
C_HEADER TYPE CHAR1
VALUE 'H', "Header in ALV
C_ITEM TYPE CHAR1
VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
Select data from ekpo
SELECT EBELN " Doc no
EBELP " Item
MATNR " Material
MATNR " Material
WERKS " Plant
WERKS " Plant
NTGEW " Quantity
GEWEI " Unit
FROM EKPO
INTO TABLE I_EKPO
WHERE EBELN IN S_EBELN
AND NTGEW NE '0.00'.
IF SY-SUBRC = 0.
SORT I_EKPO BY EBELN EBELP MATNR .
ENDIF.
To build the Page header
PERFORM SUB_BUILD_HEADER.
To prepare field catalog
PERFORM SUB_FIELD_CATALOG.
Perform to populate the layout structure
PERFORM SUB_POPULATE_LAYOUT.
Perform to populate the sort table.
PERFORM SUB_POPULATE_SORT.
Perform to populate ALV event
PERFORM SUB_GET_EVENT.
END-OF-SELECTION.
Perform to display ALV report
PERFORM SUB_ALV_REPORT_DISPLAY.
*& Form sub_build_header
To build the header
No Parameter
FORM SUB_BUILD_HEADER .
Local data declaration
DATA: L_SYSTEM TYPE CHAR10 , "System id
L_R_LINE TYPE SLIS_LISTHEADER, "Hold list header
L_DATE TYPE CHAR10, "Date
L_TIME TYPE CHAR10, "Time
L_SUCCESS_RECORDS TYPE I, "No of success records
L_TITLE(300) TYPE C. " Title
Title Display
L_R_LINE-TYP = C_HEADER. " header
L_TITLE = 'Test report'(001).
L_R_LINE-INFO = L_TITLE.
APPEND L_R_LINE TO I_ALV_TOP_OF_PAGE.
CLEAR L_R_LINE.
Run date Display
CLEAR L_DATE.
L_R_LINE-TYP = C_ITEM. " Item
WRITE: SY-DATUM TO L_DATE MM/DD/YYYY.
L_R_LINE-KEY = 'Run Date :'(002).
L_R_LINE-INFO = L_DATE.
APPEND L_R_LINE TO I_ALV_TOP_OF_PAGE.
CLEAR: L_R_LINE,
L_DATE.ENDFORM. " sub_build_header
*& Form sub_field_catalog
Build Field Catalog
No Parameter
FORM SUB_FIELD_CATALOG .
Build Field Catalog
PERFORM SUB_FILL_ALV_FIELD_CATALOG USING:
'01' '01' 'EBELN' 'I_EKPO' 'L' 'Doc No'(003) ' ' ' ' ' ' ' ',
'01' '02' 'EBELP' 'I_EKPO' 'L' 'Item No'(004) 'X' 'X' ' ' ' ',
'01' '03' 'MATNR' 'I_EKPO' 'L' 'Material No'(005) 'X' 'X' ' ' ' ',
'01' '03' 'MATNR1' 'I_EKPO' 'L' 'Material No'(005) ' ' ' ' ' ' ' ',
'01' '04' 'WERKS' 'I_EKPO' 'L' 'Plant'(006) 'X' 'X' ' ' ' ',
'01' '04' 'WERKS1' 'I_EKPO' 'L' 'Plant'(006) ' ' ' ' ' ' ' ',
'01' '05' 'NTGEW' 'I_EKPO' 'R' 'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'
ENDFORM. " sub_field_catalog
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM SUB_FILL_ALV_FIELD_CATALOG USING P_ROWPOS TYPE SYCUROW
P_COLPOS TYPE SYCUCOL
P_FLDNAM TYPE FIELDNAME
P_TABNAM TYPE TABNAME
P_JUSTIF TYPE CHAR1
P_SELTEXT TYPE DD03P-SCRTEXT_L
P_OUT TYPE CHAR1
P_TECH TYPE CHAR1
P_QFIELD TYPE SLIS_FIELDNAME
P_QTAB TYPE SLIS_TABNAME.
Local declaration for field catalog
DATA: WA_LFL_FCAT TYPE SLIS_FIELDCAT_ALV.
WA_LFL_FCAT-ROW_POS = P_ROWPOS. "Row
WA_LFL_FCAT-COL_POS = P_COLPOS. "Column
WA_LFL_FCAT-FIELDNAME = P_FLDNAM. "Field Name
WA_LFL_FCAT-TABNAME = P_TABNAM. "Internal Table Name
WA_LFL_FCAT-JUST = P_JUSTIF. "Screen Justified
WA_LFL_FCAT-SELTEXT_L = P_SELTEXT. "Field Text
WA_LFL_FCAT-NO_OUT = P_OUT. "No output
WA_LFL_FCAT-TECH = P_TECH. "Technical field
WA_LFL_FCAT-QFIELDNAME = P_QFIELD. "Quantity unit
WA_LFL_FCAT-QTABNAME = P_QTAB . "Quantity table
IF P_FLDNAM = 'NTGEW'.
WA_LFL_FCAT-DO_SUM = 'X'.
ENDIF.
APPEND WA_LFL_FCAT TO I_FIELDCAT.
CLEAR WA_LFL_FCAT.
ENDFORM. " sub_fill_alv_field_catalog
*& Form sub_populate_layout
Populate ALV layout
No Parameter
FORM SUB_POPULATE_LAYOUT . CLEAR WA_LAYOUT.
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'." Optimization of Col width
ENDFORM. " sub_populate_layout
*& Form sub_populate_sort
Populate ALV sort table
No Parameter
FORM SUB_POPULATE_SORT .
Sort on material
WA_SORT-SPOS = '01' .
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-TABNAME = 'I_EKPO'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO I_SORT .
CLEAR WA_SORT.
Sort on plant
WA_SORT-SPOS = '02'.
WA_SORT-FIELDNAME = 'WERKS'.
WA_SORT-TABNAME = 'I_EKPO'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO I_SORT .
CLEAR WA_SORT.
ENDFORM. " sub_populate_sort
*& Form sub_get_event
Get ALV grid event and pass the form name to subtotal_text
event
No Parameter
FORM SUB_GET_EVENT .
CONSTANTS : C_FORMNAME_SUBTOTAL_TEXT TYPE SLIS_FORMNAME VALUE
'SUBTOTAL_TEXT'.
DATA: L_S_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 4
IMPORTING
ET_EVENTS = I_EVENT
EXCEPTIONS
LIST_TYPE_WRONG = 0
OTHERS = 0.
Subtotal
READ TABLE I_EVENT INTO L_S_EVENT
WITH KEY NAME = SLIS_EV_SUBTOTAL_TEXT.
IF SY-SUBRC = 0.
MOVE C_FORMNAME_SUBTOTAL_TEXT TO L_S_EVENT-FORM.
MODIFY I_EVENT FROM L_S_EVENT INDEX SY-TABIX.
ENDIF.
ENDFORM. " sub_get_event
*& Form sub_alv_report_display
For ALV Report Display
No Parameter
FORM SUB_ALV_REPORT_DISPLAY .
DATA: L_REPID TYPE SYREPID .
L_REPID = SY-REPID .
This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = L_REPID
I_CALLBACK_TOP_OF_PAGE = 'SUB_ALV_TOP_OF_PAGE'
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = I_FIELDCAT
IT_SORT = I_SORT
IT_EVENTS = I_EVENT
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.ENDFORM. " sub_alv_report_display
FORM sub_alv_top_of_page
Call ALV top of page
No parameter
FORM SUB_ALV_TOP_OF_PAGE. "#EC CALLED
To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_ALV_TOP_OF_PAGE.
ENDFORM. "alv_top_of_page
*& Form subtotal_text
Build subtotal text
P_total Total
p_subtot_text Subtotal text info
FORM SUBTOTAL_TEXT CHANGING
P_TOTAL TYPE ANY
P_SUBTOT_TEXT TYPE SLIS_SUBTOT_TEXT.
Material level sub total
IF P_SUBTOT_TEXT-CRITERIA = 'MATNR'.
P_SUBTOT_TEXT-DISPLAY_TEXT_FOR_SUBTOTAL
= 'Material level total'(009).
ENDIF.
Plant level sub total
IF P_SUBTOT_TEXT-CRITERIA = 'WERKS'.
P_SUBTOT_TEXT-DISPLAY_TEXT_FOR_SUBTOTAL = 'Plant level total'(010).
ENDIF.
ENDFORM. "subtotal_text
Similar Messages
-
CUSTOMIZE FIELD TOTAL IN ALV REPORT
Hi all,
I am using ALV List display and calculating totals and subtotals. I have 3 columns and the totals are all displayed column-wise.
But my requirement is that total of 3rd column should not be the sum of all the values in that column but it has to be ( total of column1 / total of column2 ). How can I replace already calculated total of column 3 by the value I get by custom logic. Please suggest me which event needs to be used and how to capture calculated total values of first 2 columns.
Here is e.g.
COL1 COL2 COL3
1 | 2 | 0.5
9 | 3 | 3
10 | 5 | 3.5 -> VALUE DISPLAYED BY ALV TOTAL
10 | 5 | (10/5 = 2) -> VALUE REQUIRED TO BE DISPLAYED
Waiting for your replies....
Regards
VasuCheck the following example:
report z_tot_alv.
TYPE-POOLS SLIS.
DATA: BEGIN OF ITAB OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR TYPE I,
WRBTR TYPE I,
WAERS LIKE BKPF-WAERS,
TOTAL TYPE P,
END OF ITAB.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
REC_FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS = 1.
FCAT-FIELDNAME = 'BELNR'.
FCAT-TABNAME = 'ITAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 2.
FCAT-FIELDNAME = 'GJAHR'.
FCAT-TABNAME = 'ITAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-DATATYPE = 'INT4'.
FCAT-INTTYPE = 'I'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 3.
FCAT-FIELDNAME = 'WRBTR'.
FCAT-TABNAME = 'ITAB'.
FCAT-DATATYPE = 'INT4'.
FCAT-INTTYPE = 'I'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 4.
FCAT-FIELDNAME = 'TOTAL'.
FCAT-TABNAME = 'ITAB'.
* FCAT-DATATYPE = 'INT4'.
FCAT-INTTYPE = 'P'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
DO 10 TIMES.
ITAB-WRBTR = SY-INDEX.
ITAB-GJAHR = SY-INDEX + 1.
ITAB-TOTAL = ITAB-WRBTR / ITAB-GJAHR.
APPEND ITAB.
ENDDO.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = 'Z_TOT_ALV'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT[]
I_TABNAME = 'ITAB'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = ITAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'. -
Discounting total amount due numeric field
I am working on a registration form and need to apply a discount if two particular checkboxes are selected.
Checkbox #1 – Early registration = $1595
Checkbox #2 – Standard registration = $1795
Checkbox #3 – Special rate = $495
Checkbox #4 – Optional workshop = $395
Numeric Field – Total Payment Due
If the user selects checkbox #1 (early) or #2 (standard), they have to pay the $395 for the optional workshop.
Total box =
sum (EarlyReg, StandardReg, SpecReg, WorkshopReg) <-- THIS WORKS
If the user selects BOTH checkbox #3 (special registration rate) AND checkbox #4 (optional workshop), they do not pay for the workshop.
So instead of $890, they will pay $495.
Total box =
I welcome any ideas you may have and would love to hear if you think I'm going at this in the wrong direction.
I am new to this...would appreciate a step-by-step with syntax. Thanks!TundraSteve, Thanks for the reply.
Your suggestion got me on the right path. Here's what worked using FormCalc on the TotalDue field:
if (SpecReg + WorkshopReg == 890) then
SpecReg
else
sum (EarlyReg, StandardReg, SpecReg, WorkshopReg)
endif
Thanks again! -
Total for a Numeric field in ALV Grid display
Hi all,
I am not getting the Total for a Numeric field in ALV Grid output. What might be the problem.
Regards,
Balavardhan.KCheck this code for subtotals and totals..
REPORT ZYFI_REPT007
NO STANDARD PAGE HEADING
LINE-SIZE 300
LINE-COUNT 50
MESSAGE-ID ZYFI.
TABLES : COOI, " Commitments Management: Line Items
LFA1, " Vendor master (general section)
VBEP,
RKPLN.
TABLE TYPES AND INTERNAL TABLES *
DATA : BEGIN OF TYP_COOI ,
OBJNR LIKE COOI-OBJNR,
SAKTO LIKE COOI-SAKTO,
MEGBTR LIKE COOI-MEGBTR,
MEINH LIKE COOI-MEINH,
WKGBTR LIKE COOI-WKGBTR,
REFBN LIKE COOI-REFBN,
RFPOS LIKE COOI-RFPOS,
SGTXT LIKE COOI-SGTXT,
BUDAT LIKE COOI-BUDAT,
LIFNR LIKE COOI-LIFNR,
END OF TYP_COOI.
DATA : BEGIN OF TYP_LFA1 ,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF TYP_LFA1.
DATA : BEGIN OF IT_OUTTAB OCCURS 0,
OBJNR LIKE COOI-OBJNR,
SAKTO LIKE COOI-SAKTO,
MEGBTR LIKE COOI-MEGBTR,
MEINH LIKE COOI-MEINH,
WKGBTR LIKE COOI-WKGBTR,
REFBN LIKE COOI-REFBN,
RFPOS LIKE COOI-RFPOS,
SGTXT LIKE COOI-SGTXT,
BUDAT LIKE COOI-BUDAT,
LIFNR LIKE COOI-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF IT_OUTTAB.
DATA : IT_COOI LIKE TYP_COOI OCCURS 0 WITH HEADER LINE,
IT_LFA1 LIKE TYP_LFA1 OCCURS 0 WITH HEADER LINE.
*-- ALV Declarations
TYPE-POOLS SLIS.
DATA: IT_EVENTS TYPE SLIS_T_EVENT,
GS_EVENT TYPE SLIS_ALV_EVENT,
wa_fldcat type slis_fieldcat_alv.
DATA: S_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_PRINT TYPE SLIS_PRINT_ALV.
DATA: IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: IT_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA: V_REPID LIKE SY-REPID.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_KOKRS FOR COOI-KOKRS NO-EXTENSION NO INTERVALS,
" Controlling Area
S_BUKRS FOR COOI-BUKRS NO-EXTENSION NO INTERVALS,
" Company code
S_GJAHR FOR COOI-GJAHR NO-EXTENSION NO INTERVALS,
" Fiscal Year
S_OBJNR FOR RKPLN-AUFNR MATCHCODE OBJECT ORDE,
" Internal order
S_SAKTO FOR COOI-SAKTO MATCHCODE OBJECT KART,
" Cost Element
S_BUDAT FOR COOI-BUDAT, " Debit Date
S_LIFNR FOR COOI-LIFNR. " Vendor
SELECTION-SCREEN END OF BLOCK B1.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
*-- Read data
PERFORM GET_DATA.
E N D O F S E L E C T I O N *
END-OF-SELECTION.
*-- Process the data and prepare the output data
PERFORM CALCULATE_FINAL_INFO.
*--Display Report output
PERFORM DISPLAY_REPORT.
FORM CALCULATE_FINAL_INFO *
Process the data and prepare final internal table *
FORM CALCULATE_FINAL_INFO.
DATA : L_OBJNR LIKE COOI-OBJNR.
SORT IT_LFA1 BY LIFNR.
DELETE ADJACENT DUPLICATES FROM IT_LFA1 COMPARING LIFNR.
LOOP AT IT_COOI.
L_OBJNR = IT_COOI-OBJNR+2(20).
SHIFT L_OBJNR LEFT DELETING LEADING '0'.
IF L_OBJNR IN S_OBJNR.
READ TABLE IT_LFA1 WITH KEY LIFNR = IT_COOI-LIFNR.
IF SY-SUBRC EQ 0.
IT_OUTTAB-NAME1 = IT_LFA1-NAME1.
ENDIF.
MOVE-CORRESPONDING IT_COOI TO IT_OUTTAB.
CLEAR IT_OUTTAB-OBJNR.
IT_OUTTAB-OBJNR = L_OBJNR.
APPEND IT_OUTTAB.
CLEAR IT_OUTTAB.
CLEAR IT_LFA1.
CLEAR L_OBJNR.
ENDIF.
ENDLOOP.
ENDFORM.
*& Form GET_DATA
Fetch the Data from the table COOI and LFA1
FORM GET_DATA.
SELECT OBJNR
SAKTO
MEGBTR
MEINH
WKGBTR
REFBN
RFPOS
SGTXT
BUDAT
LIFNR
FROM COOI
INTO TABLE IT_COOI
WHERE BUDAT IN S_BUDAT
AND LIFNR IN S_LIFNR
AND KOKRS IN S_KOKRS
AND BUKRS IN S_BUKRS
AND GJAHR IN S_GJAHR
AND SAKTO IN S_SAKTO.
IF SY-SUBRC EQ 0 .
Get the Vendor name from LFA1
SELECT LIFNR
NAME1
FROM LFA1
INTO TABLE IT_LFA1
FOR ALL ENTRIES IN IT_COOI
WHERE LIFNR EQ IT_COOI-LIFNR.
ELSE.
MESSAGE I999 WITH TEXT-013.
ENDIF.
ENDFORM. " GET_DATA
*& Form DISPLAY_REPORT
Display the output
FORM DISPLAY_REPORT.
PERFORM BUILD_CATALOG.
PERFORM FRM_PREPARE_EVENT_LIST TABLES IT_EVENTS.
IF NOT IT_OUTTAB[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FLDCAT
IT_SORT = IT_SORT
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = IT_OUTTAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ELSE.
MESSAGE I999 WITH TEXT-013.
ENDIF.
ENDFORM. " DISPLAY_REPORT
*& Form BUILD_CATALOG
Build the Field catalog for the ALV Report
FORM BUILD_CATALOG.
DATA: V_INDEX LIKE SY-TABIX.
V_REPID = SY-REPID.
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'IT_OUTTAB'
I_INCLNAME = V_REPID
CHANGING
CT_FIELDCAT = IT_FLDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE IT_FLDCAT WITH KEY FIELDNAME = 'WKGBTR'
TABNAME = 'IT_OUTTAB' INTO WA_FLDCAT.
IF SY-SUBRC EQ 0.
WA_FLDCAT-DO_SUM = 'X'.
MODIFY IT_FLDCAT FROM WA_FLDCAT INDEX SY-TABIX.
ENDIF.
READ TABLE IT_FLDCAT WITH KEY FIELDNAME = 'OBJNR'
TABNAME = 'IT_OUTTAB' INTO WA_FLDCAT.
IF SY-SUBRC EQ 0.
WA_FLDCAT-SELTEXT_L = 'Order'.
WA_FLDCAT-COL_POS = 1.
WA_FLDCAT-DDICTXT = 'L'.
MODIFY IT_FLDCAT FROM WA_FLDCAT INDEX SY-TABIX.
ENDIF.
LS_SORT-FIELDNAME = 'OBJNR'.
LS_SORT-SPOS = 1.
LS_SORT-UP = 'X'.
LS_SORT-SUBTOT = 'X'.
APPEND LS_SORT TO IT_SORT.
ENDFORM. " BUILD_CATALOG
*& Form FRM_PREPARE_EVENT_LIST
Build the Events
FORM FRM_PREPARE_EVENT_LIST TABLES IT_EVENTS TYPE SLIS_T_EVENT.
CLEAR GS_EVENT.
GS_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
GS_EVENT-FORM = 'TOP_OF_PAGE_REPORT'.
APPEND GS_EVENT TO IT_EVENTS.
ENDFORM. " FRM_PREPARE_EVENT_LIST
TOP OF PAGE
FORM TOP_OF_PAGE_REPORT.
CALL FUNCTION 'Z_YREPORT_HEADER'
EXPORTING
DL_TITLE = SY-TITLE
DL_REPID = SY-CPROG
DL_LINSZ = SY-LINSZ
EXCEPTIONS
OTHERS = 1.
ENDFORM. " FRM_TOP_OF_PAGE_REPORT
*& Form USER_COMMAND
Drill Down Functionality to Call the Transaction ME23
FORM USER_COMMAND USING P_UCOMM LIKE SY-UCOMM
P_SELFIELD TYPE SLIS_SELFIELD.
DATA : L_INDEX LIKE SY-INDEX,
L_REFBN LIKE COOI-REFBN.
L_INDEX = P_SELFIELD-TABINDEX. " holds the selected table index
CLEAR L_REFBN.
CASE P_UCOMM.
*-- On Double Click
WHEN '&IC1'.
CLEAR L_REFBN.
*-- Read the Current Line
READ TABLE IT_OUTTAB INDEX L_INDEX.
IF SY-SUBRC EQ 0.
L_REFBN = IT_OUTTAB-REFBN.
IF NOT L_REFBN IS INITIAL.
*-- Set the BES Paramater Id to the Current line Purchase Order Number
SET PARAMETER ID 'BES' FIELD L_REFBN.
*-- Call the Transaction Purchase Order Display with the above PO Number
CALL TRANSACTION 'ME23' AND SKIP FIRST SCREEN.
ENDIF.
ELSE.
MESSAGE E999 WITH TEXT-014.
ENDIF.
ENDCASE.
ENDFORM. " USER_COMMAND -
Alv output to Excel with numeric fields as numeric fields only and not char
Hi,
When we download the alv output to excel format in the locat file using the toolbar button provided in the ALV, the numeric fields get converted to character format. Is there any other way or settings in ALV so that the numeric fields will be get saved as numeric fields only and not character?
Rgds,
MAdhuriany idea for above problem is welcome
-
How to multiply a numeric field (with Quantity) with a Cell (text field with price) to get a total?
In Javascript I suggest multiplying the text field by 1 to change it to a numeric type then multiply this with the other numeric field. The code would look something like:
Total.rawValue = numericField.rawValue * (textField.rawValue*1) -
Hi,
I have an alv layout like following:
ZZZ 300100089 1050
ZZZ 300100089 1050
subtoal 2100
90256243 300100000 193410
90256242 300100000 173250
90256241 300100000 173250
90256240 300100000 173250
90256239 300100000 173250
90256238 300100000 173250
90256237 300100000 173250
subtotal 1232910
when the second numbers are the same,
I need to sum up as
300100089 2100
300100000 1232910
I write the coding as the following, but it did not work, Please
help and correct it!!
the coding:
data: it_sortcat type slis_sortinfo_alv occurs 1,
wa_sort like line of it_sortcat.
sort gt_outalv.
wa_sort-fieldname = 'wrbtr'.
wa_sort-SUBTOT = 'X'.
APPEND wa_sort TO it_sortcat.
In FM
it_sort = it_sortcat
I got dump and it did not work .
Please correct my coding !!
Thank you in advance,Check the Below Example program
the code below produces alv display with 2 columns: field1 & field2.
field1 is character based & the int. table passed to the alv is sorted on this field.
field2 is numeric, whose subtotals are desired.
so while populating the gt_sort table the option gs_sort-subtot is set for field1 bcoz the subtotals are to be based on the groups existing in this column.whereas the same option is NOT set for field2, even though the subtotal appears in that column.i have marked these 2 statements in the code for your convenience.
execute the code below & you will surely understand what i said above.
bye!!
report zalv10.
type-pools: slis.
data: g_repid like sy-repid,
gs_print type slis_print_alv,
gt_list_top_of_page type slis_t_listheader,
gt_events type slis_t_event,
gt_sort type slis_t_sortinfo_alv,
gs_layout type slis_layout_alv,
gt_fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of gt_fieldcat,
col_pos type i.
data: begin of itab,
field1(5) type c,
field2(5) type c,
field3(5) type p decimals 2,
end of itab.
data: begin of itab1 occurs 0.
include structure itab.
data: end of itab1.
data: begin of itab_fieldcat occurs 0.
include structure itab.
data: end of itab_fieldcat.
Print Parameters
parameters:
p_print as checkbox default ' ', "PRINT IMMEDIATE
p_nosinf as checkbox default 'X', "NO SELECTION INFO
p_nocove as checkbox default ' ', "NO COVER PAGE
p_nonewp as checkbox default ' ', "NO NEW PAGE
p_nolinf as checkbox default 'X', "NO PRINT LIST INFO
p_reserv type i. "NO OF FOOTER LINE
initialization.
g_repid = sy-repid.
perform print_build using gs_print. "Print PARAMETERS
start-of-selection.
TEST DATA
move 'TEST1' to itab1-field1.
move 'TEST1' to itab1-field2.
move '10.00' to itab1-field3.
append itab1.
move 'TEST2' to itab1-field1.
move 'TEST2' to itab1-field2.
move '20.00' to itab1-field3.
append itab1.
do 50 times.
append itab1.
enddo.
end-of-selection.
perform build.
perform eventtab_build changing gt_events.
perform comment_build changing gt_list_top_of_page.
perform call_alv.
form build.
DATA FIELD CATALOG
Explain Field Description to ALV
data: fieldcat_in type slis_fieldcat_alv.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD1'.
fieldcat_ln-tabname = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
fieldcat_ln-key = ' '. "SUBTOTAL KEY
fieldcat_ln-no_out = ' '.
fieldcat_ln-seltext_l = 'HEAD1'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD2'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-no_out = 'X'.
fieldcat_ln-seltext_l = 'HEAD2'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD3'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-ref_fieldname = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
fieldcat_ln-ref_tabname = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
fieldcat_ln-no_out = ' '.
fieldcat_ln-do_sum = 'X'. "SUM UPON DISPLAY
append fieldcat_ln to gt_fieldcat.
DATA SORTING AND SUBTOTAL*
data: gs_sort type slis_sortinfo_alv.
*clear gs_sort.*
*gs_sort-fieldname = 'FIELD1'.*
*gs_sort-spos = 1.*
*gs_sort-up = 'X'.*
**gs_sort-subtot = 'X'. ***CRUCIAL STATEMENT******
*append gs_sort to gt_sort.*
clear gs_sort.
gs_sort-fieldname = 'FIELD2'.
gs_sort-spos = 2.
gs_sort-up = 'X'.
**GS_SORT-SUBTOT = 'X'. **THIS SHOULD NOT BE UNCOMENTED**
append gs_sort to gt_sort. endform.
form call_alv.
ABAP List Viewer
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_structure_name = 'ITAB1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = gt_events[]
IT_EVENT_EXIT =
is_print = gs_print
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = itab1
exceptions
program_error = 1
others = 2.
endform.
HEADER FORM
form eventtab_build changing lt_events type slis_t_event.
constants:
gc_formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = lt_events.
read table lt_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move gc_formname_top_of_page to ls_event-form.
append ls_event to lt_events.
endif.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
endform.
form comment_build changing gt_top_of_page type slis_t_listheader.
data: gs_line type slis_listheader.
clear gs_line.
gs_line-typ = 'H'.
gs_line-info = 'HEADER 1'.
append gs_line to gt_top_of_page.
clear gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'INFO 1'.
append gs_line to gt_top_of_page.
gs_line-key = 'STATUS 2'.
gs_line-info = 'INFO 2'.
append gs_line to gt_top_of_page.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
endform.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
write: sy-datum, 'Page No', sy-pagno left-justified.
endform.
form end_of_page.
write at (sy-linsz) sy-pagno centered.
endform.
PRINT SETTINGS
form print_build using ls_print type slis_print_alv.
ls_print-print = p_print. "PRINT IMMEDIATE
ls_print-no_print_selinfos = p_nosinf. "NO SELECTION INFO
ls_print-no_coverpage = p_nocove. "NO COVER PAGE
ls_print-no_new_page = p_nonewp.
ls_print-no_print_listinfos = p_nolinf. "NO PRINT LIST INFO
ls_print-reserve_lines = p_reserv.
endform.
Kanagaraja L -
hi,
I have a report on ALV with sub totals for some fields, it is working fine but my requirement is whether i can get only the sub totals of that report.
regards,
PrabhuHI
refer this code.
REPORT ZALV.
TYPE-POOLS: SLIS.
DATA: G_REPID LIKE SY-REPID,
GS_PRINT TYPE SLIS_PRINT_ALV,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GT_EVENTS TYPE SLIS_T_EVENT,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF GT_FIELDCAT,
COL_POS TYPE I.
DATA: BEGIN OF ITAB,
FIELD1(5) TYPE C,
FIELD2(5) TYPE C,
FIELD3(5) TYPE P DECIMALS 2,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB1.
DATA: BEGIN OF ITAB_FIELDCAT OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB_FIELDCAT.
Print Parameters
PARAMETERS:
P_PRINT AS CHECKBOX DEFAULT ' ', "PRINT IMMEDIATE
P_NOSINF AS CHECKBOX DEFAULT 'X', "NO SELECTION INFO
P_NOCOVE AS CHECKBOX DEFAULT ' ', "NO COVER PAGE
P_NONEWP AS CHECKBOX DEFAULT ' ', "NO NEW PAGE
P_NOLINF AS CHECKBOX DEFAULT 'X', "NO PRINT LIST INFO
P_RESERV TYPE I. "NO OF FOOTER LINE
INITIALIZATION.
G_REPID = SY-REPID.
PERFORM PRINT_BUILD USING GS_PRINT. "Print PARAMETERS
START-OF-SELECTION.
TEST DATA
MOVE 'TEST1' TO ITAB1-FIELD1.
MOVE 'TEST1' TO ITAB1-FIELD2.
MOVE '10.00' TO ITAB1-FIELD3.
APPEND ITAB1.
MOVE 'TEST2' TO ITAB1-FIELD1.
MOVE 'TEST2' TO ITAB1-FIELD2.
MOVE '20.00' TO ITAB1-FIELD3.
APPEND ITAB1.
DO 50 TIMES.
APPEND ITAB1.
ENDDO.
END-OF-SELECTION.
PERFORM BUILD.
PERFORM EVENTTAB_BUILD CHANGING GT_EVENTS.
PERFORM COMMENT_BUILD CHANGING GT_LIST_TOP_OF_PAGE.
PERFORM CALL_ALV.
FORM BUILD.
DATA FIELD CATALOG
Explain Field Description to ALV
DATA: FIELDCAT_IN TYPE SLIS_FIELDCAT_ALV.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD1'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
FIELDCAT_LN-KEY = ' '. "SUBTOTAL KEY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-SELTEXT_L = 'HEAD1'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD2'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-NO_OUT = 'X'.
FIELDCAT_LN-SELTEXT_L = 'HEAD2'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD3'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-REF_FIELDNAME = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
FIELDCAT_LN-REF_TABNAME = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-DO_SUM = 'X'. "SUM UPON DISPLAY
APPEND FIELDCAT_LN TO GT_FIELDCAT.
DATA SORTING AND SUBTOTAL
DATA: GS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD1'.
GS_SORT-SPOS = 1.
GS_SORT-UP = 'X'.
GS_SORT-SUBTOT = 'X'.
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD2'.
GS_SORT-SPOS = 2.
GS_SORT-UP = 'X'.
*GS_SORT-SUBTOT = 'X'.
APPEND GS_SORT TO GT_SORT.
ENDFORM.
FORM CALL_ALV.
ABAP List Viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'ITAB1'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT = GS_PRINT
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM.
HEADER FORM
FORM EVENTTAB_BUILD CHANGING LT_EVENTS TYPE SLIS_T_EVENT.
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = LT_EVENTS.
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
ENDFORM.
FORM COMMENT_BUILD CHANGING GT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: GS_LINE TYPE SLIS_LISTHEADER.
CLEAR GS_LINE.
GS_LINE-TYP = 'H'.
GS_LINE-INFO = 'HEADER 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'S'.
GS_LINE-KEY = 'STATUS 1'.
GS_LINE-INFO = 'INFO 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
GS_LINE-KEY = 'STATUS 2'.
GS_LINE-INFO = 'INFO 2'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
WRITE: SY-DATUM, 'Page No', SY-PAGNO LEFT-JUSTIFIED.
ENDFORM.
FORM END_OF_PAGE.
WRITE at (sy-linsz) sy-pagno CENTERED.
ENDFORM.
PRINT SETTINGS
FORM PRINT_BUILD USING LS_PRINT TYPE SLIS_PRINT_ALV.
LS_PRINT-PRINT = P_PRINT. "PRINT IMMEDIATE
LS_PRINT-NO_PRINT_SELINFOS = P_NOSINF. "NO SELECTION INFO
LS_PRINT-NO_COVERPAGE = P_NOCOVE. "NO COVER PAGE
LS_PRINT-NO_NEW_PAGE = P_NONEWP.
LS_PRINT-NO_PRINT_LISTINFOS = P_NOLINF. "NO PRINT LIST INFO
LS_PRINT-RESERVE_LINES = P_RESERV.
ENDFORM.
*END OF ZALV PROGRAM
Reward all helpfull answers.
Regards.
Jay -
Hi Friends,
Please help me out, I am new to ABAP.
Please anybody explain me the functionality of Field catalogs in ALVs?
How many methods are there to pass data to ALVs, i.e., in how many ways?
Hope u will help me.hi,
this will be very helpful for ALV REPORTING.....
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain upto 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
The different steps used for getting the above function modules into use are:
Step 1
DATA DECLARATION
Sap standard type pools: SLIS , KKBLO .
Sap standard tables types taken from the type pools are: SLIS_LAYOUT_ALV ,
SLIS_T_FIELDCAT_ALV,
SLIS_T_LISTHEADER,
SLIS_T_EVENT,
SLIS_SELFIELD.
Internal tables to used in the program declared based on the above table types
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
I_HEADING TYPE SLIS_T_LISTHEADER,
I_EVENTS TYPE SLIS_T_EVENT.
TYPES: KKBLO_SELFIELD TYPE SLIS_SELFIELD.
Step 2 (Optional)
SELECTING THE VARIANTS FOR INITIAL LIST DISPLAY (DEFAULT VARIANT)
The variants in the list display can be both user-specific and general. The user can programmatically set the initial (default) variant for list display.
The default variant can be found using the function module 'REUSE_ALV_VARIANT_DEFAULT_GET'.
Sample code:
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = variant save condition ( A=all, U = user-specific )
CHANGING
cs_variant = internal table containing the program name (and the default variant---optional )
EXCEPTIONS
not_found = 2.
The user can also choose from the list of existing variants using the function module REUSE_ALV_VARIANT_F4.
Step 3
DEFININING OUTPUT CHARACTERISTICS: PREPARING DISPLAY FIELDS CATALOG
A field catalog is prepared using the internal table (I_FIELDCAT) of type SLIS_T_FIELDCAT_ALV. Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields).
A field catalog is required for every ALV list output to add desired functionality (i.e. Key, Hotspot, Specific headings, Justify, Col. position etc) to certain fields of the output. If not mentioned specifically, then the defaults are taken. The possible values and defaults are listed below.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module.
The minimal field catalog is documented below. This can be done in a routine using a local variable. The user can use the other optional parameters to assign output attributes to different fields in the output, which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
1. The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE. In this case the attributes of the different fields is taken directly from the table and the attributes (key fields, length, texts etc) need to state explicitly.
2. all fields in this structure are to be output
3. The structure name is passed to ALV in the parameter I_STRUCTURE_NAME of the function module REUSE_ALV_LIST_DISPLAY.
All the values entered in the catalog is specific to the particular field whose name is entered in the fieldname FIELDNAME of the fieldcat structure. The name of the table is also entered in the corr. Fieldname TABNAME of the structure.
The different possible attributes are:
Row_pos (row position): Only relevant if the list output is to be multi-line (two or three lines) by default. So, this attribute can be used maintain certain level of alignment in the output.
Value set: 0, 1 3
Col_pos (column position): This parameter is relevant when the fields in the output are to be different from the sequence of the fields in the internal table used for display. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the internal table field sequence.
Value set: 0, 1 60
Fieldname (field name): This is the name of the internal table field for which the parameters are passed in the catalog.
Value set: internal output table field name (required parameter)
Tabname (internal output table): Name of the internal output table that contains the field FIELDCAT-FIELDNAME above.
Value set: SPACE, internal output table name.
Ref_fieldname (reference field name): Name of the Data Dictionary field referred to. This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
Value set: SPACE, Data Dictionary field name.
Ref_tabname (reference table/structure field name): Structure or table name of the referred Data Dictionary field. This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Value set: SPACE, name of a Data Dictionary structure or table
Link to currency unit
Cfieldname (currency unit field name): This is used for currency fields that have a reference to any unit field. This is only relevant for amount columns with associated unit. This parameter contains the Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name
Ctabname (internal currency unit field output table): Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Value set: SPACE, output table field name.
Link to measurement unit
Qfieldname (measurement unit field name): Only relevant for quantity columns with unit link. Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME. The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name.
Qtabname (internal measurement unit field output table): Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Value set: SPACE, output table field name.
Outputlen (column width): This parameter is used if the desired output length for a field is desired to be different from the internal output table field. For fields with a Data Dictionary link this parameter can be left initial. For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
Initial = column width is the output length of the referred Data Dictionary field (domain).
N = column width is n characters.
Value set: 0 (initial), n.
Key (key column): By default, the system makes some fields in the output as key fields, provided the fields are key fields in their referencing table. Using this parameter, fields other than key fields of the referencing table can be made key field. This parameter is most important if the output needs to contain some field which are not scrollable or cannot be hidden.
If the internal output table contains fields that are key fields from different tables, then all those fields in the report output becomes unscrollable and cannot be hidden. So, the fields in the output internal table should not be referenced from tables in which they are key fields. Instead, they should be referenced to the tables in which they are not key fields, incase they are not desired as key field in the output.
'X' = key field (key field output in color) and Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
Value set: SPACE, 'X'.
Key_sel (hideable key column): This parameter is only relevant for the fields which are made key fields using FIELDCAT-KEY = 'X'. Using this parameter the Key field can be hidden interactively.
The key column sequence cannot be changed interactively by the user. The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
Value set: SPACE, 'X'.
No_out (field in field list): This parameter is used to remove certain fields from the output during initial display. The user can however interactively choose the field for output from the field list in the display variant.
'X' = field is not displayed in the current list.
Value set: SPACE, 'X'.
Tech (technical field): This parameter is used to make certain field display only in the field catalog. The fields with this parameter set cannot be output in the list nor can they be displayed interactively from the catalog.
'X' = technical field.
Value set: SPACE, 'X'.
Emphasize (highlight columns in color): As name suggests, this field parameter is used to highlight certain field with chosen colors.
Value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off ,'1'=on).
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
- C: Color (coding must begin with C)
- X: color number
- Y: bold
- Z: inverse
Hotspot (column as hotspot): This parameter is used to make certain field appear as hotspot i.e. a hand is displayed if the cursor is positioned on the field value. Single click on such fields cause the PICK OR F2 events to happen.
Value set: SPACE, 'X'.
'X' = column cells are output as hotspots.
Fix_column (fix column): This parameter is used to fix certain columns in the output. All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively.
Value set: SPACE, 'X'.
'X' = column fixed (does not scroll horizontally).
Do_sum (sum over column): the user can also call this function interactively.
Value set: SPACE, 'X'.
'X' = a sum is calculated over this internal output table field.
No_sum (sums forbidden): No sum can be calculated over this field, although the data type of the field would allow summing.
Value set: SPACE, 'X'.
Icon: The parameter displays certain column contents as icons. The internal output table column contents must be valid icon strings.
Value set: SPACE, 'X'.
'X' = column contents to be output as an icon.
Symbol: The internal output table column must be a valid symbol character.
Value set: SPACE, 'X'
'X' = column contents are to be output as a symbol.
Just (justification): This parameter is used for alignment of the contents of the output table. This is only relevant for CHAR or NUMC fields in the output internal table. The justification of the column header always follows the justification of the columns. Independent justification of the column header is not possible.
Value set: SPACE, 'R', 'L', and C.
' ' = Default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output.
Lzero (leading zeros): By default ALV outputs NUMC fields right-justified without leading zeros. Using this parameter only the NUMC fields can be displayed with leading zeroes.
Value set: SPACE, 'X'.
'X' = output with leading zeros.
No_sign (no +/- sign): This parameter is used to suppress the signs of the output fields. It is only relevant for the value fields.
Value set: SPACE, 'X'.
'X' = value output without +/ sign.
No_zero (suppress zeros): Only relevant for value fields.
Value set: SPACE, 'X'.
'X' = suppress zeros.
Edit_mask (field formatting): To apply the report output formatting options same as in the WRITE statement in report writing.
Value set: SPACE, template.
The following parameters are used for customizing the texts in the heading of the output of the columns. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored.
If the user changes the column width interactively, the column header text with the appropriate length is always used.
The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition,
Sort, etc. Popup.
seltext_l (long field label)
seltext_m (medium field label)
seltext_s (short field label)
reptext_ddic(header) Analogous to the Data element main header
Ddictxt (specify text) : You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Value set: SPACE, 'L', 'M', and S.
Sample code:
Suppose I_PO_DETAILS is an internal table containing two fields EBELN (PO number) and EBELP (PO item no).
DATA: L_FIELDCAT TYPE SLIS_FIELDCAT_ALV. Local variable to hold the parameters
for a particular field of the field catalog
CLEAR L_FIELDCAT.
L_FIELDCAT-TABNAME = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'. The PO no is made the key field,
Colored and non scrollable
L_FIELDCAT-HOTSPOT = 'X'. The po no becomes a hotspot
L_FIELDCAT-SELTEXT_S = P.O No.
L_FIELDCAT-SELTEXT_M = 'P order No'.
L_FIELDCAT-SELTEXT_L = 'Purchase order No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
L_FIELDCAT-TABNAME = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'. The po item no is made the key field,
Colored and non scrollable
L_FIELDCAT-SELTEXT_S = 'Item No'.
L_FIELDCAT-SELTEXT_M = 'Item No`.
L_FIELDCAT-SELTEXT_L = 'PO Item No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
Thus the catalog for the report output is prepared.
Step 4
The next step is to build an event table, which are used for firing both user commands and the system dependent events i.e. top of page, end of page etc.
A list of possible events is populated into an event table (I_EVENTS) when this table is passed to the function module REUSE_ALV_EVENT_NAMES_GET. The return table from this function module contains all the possible events.
The function module contains following import and export parameters.
IMPORTING PARAMETERS: I_LIST_TYPE
This parameter has possible values from 0-4.
The parameter I_LIST_TYPE is of TYPE SLIS_LIST_TYPE and is DEFAULT 0 .
EXPORTING PARAMETERS: I_EVENTS table.
This table is of TYPE SLIS_T_EVENT and returns to the program the name of all the possible events.
The table structure contains the fields:
I_EVENTS-NAME: Name of the Callback event.
I_EVENTS-FORM: Name of the form routine that should be called in the calling program at the event.
Only events with a form routine name are processed.
The I_EVENTS table returns with the following possible constants:
1. Slis_ev_item_data_expand TYPE slis_formname VALUE 'ITEM_DATA_EXPAND'.
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT. Exit for passing item entries (ITEM table) for a header record that was expanded interactively by the user.
2. Slis_ev_reprep_sel_modify TYPE slis_formname VALUE 'REPREP_SEL_MODIFY'.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header that is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table.
RS_SELFIELD is initial in this case.
3. Slis_ev_caller_exit_at_start TYPE slis_formname VALUE 'CALLER_EXIT'.
Is called at the beginning of the function module to make special settings. It is not usually used.
4. Slis_ev_user_command TYPE slis_formname VALUE 'USER_COMMAND'.
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface by passing the user command in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
5. Slis_ev_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
Equivalent to the list processing TOP-OF-PAGE event.
6. Slis_ev_top_of_coverpage TYPE slis_formname VALUE 'TOP_OF_COVERPAGE'.
The selection information and list status are output together (if they exist) on a separate page by default
7. Slis_ev_end_of_coverpage TYPE slis_formname VALUE 'END_OF_COVERPAGE'.
Analogously to TOP_OF_COVERPAGE the user can add other information
to the information output by ALV (selection information, list status) at this event.
8. Slis_ev_foreign_top_of_page TYPE slis_formname VALUE FOREIGN_TOP_OF_PAGE'.
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
9. Slis_ev_foreign_end_of_page TYPE slis_formname VALUE 'FOREIGN_END_OF_PAGE'.
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
10. Slis_ev_pf_status_set TYPE slis_formname VALUE 'PF_STATUS_SET'.
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status. As this is a frequently used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
11. Slis_ev_list_modify TYPE slis_formname VALUE 'LIST_MODIFY'.
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX.
12. Slis_ev_top_of_list TYPE slis_formname VALUE 'TOP_OF_LIST'.
Information output at the start of the list
13. Slis_ev_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
Information output at the end of a page. This is only called for printing.
14. Slis_ev_end_of_list TYPE slis_formname VALUE 'END_OF_LIST'.
Information output at the end of the list
15. Slis_ev_after_line_output TYPE slis_formname VALUE 'AFTER_LINE_OUTPUT'.
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
16. Slis_ev_before_line_output TYPE slis_formname VALUE 'BEFORE_LINE_OUTPUT'.
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
17. Slis_ev_subtotal_text TYPE slis_formname VALUE 'SUBTOTAL_TEXT'.
This event table (I_EVENTS) is now checked with the desired constants. If the desired constant is found, then the corresponding field for the FORM NAME is populated with the name of the routine containing the corresponding event.
Sample code :
FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE', FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA: L_I_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = I_EVENTS.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_TOP_OF_PAGE TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_END_OF_PAGE TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
CLEAR L_I_EVENT.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_USER_COMMAND TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
This will prepare the events table for the report.
The report will contain three forms for the above events:
1. FORM TOP_OF_PAGE : This form will contain the top of page event for the report i.e header etc
Using the function module REUSE_ALV_COMMENTARY_WRITE, the internal table containing the headings for top of page event can be passed to the list output. Also, any logo specific to the report can be passed to the function module.
2. FORM END_OF_PAGE : This form will contain the end of page event for the report i.e footer etc
3. FORM USER_COMMAND : This form will contain the desired user command i.e pick/line selection
Step 5
A layout is build for the report output list description USING the internal table declared above (I_LAYOUT).
Output list description structure.
The parameters are described under the following heads:
Display options
Exceptions
Totals
Interaction
Detail screen
Display variants (only for hierarchical-sequential lists)
Color
Other
The layout table is of type slis_layout_alv_spec and has the following fields:
Display options
1. Colwidth_optimize (1) TYPE c: This parameter optimizes the length of the different columns in the output. The width of the different col. now depends on the max. Length of the data in the column.
Value set: SPACE, 'X'
'X' = optimizes the column width so that all contents are displayed completely.
2. No_colhead(1) TYPE c : This parameter suppresses the column headings
Value set: SPACE, 'X'.
'X' = column headers are not output
3. No_hotspot(1) TYPE c : The heading of the report output are not output as hotspot.
Value set: SPACE, 'X'.
'X' = column headers are not output as hotspot
4. Zebra(1) TYPE c : The report is output in the striped pattern.
Value set: SPACE, 'X'.
'X' = striped pattern (e.g. for wide lists)
5. No_vline(1) TYPE c : The report output contains columns only separated by space and no lines. It is not relevant for: hierarchical-sequential lists and multiple-line lists.
Value set: SPACE, 'X'.
'X' = columns separated by SPACE
6. No_min_linesize(1) TYPE c : The report line size is equal to the width of the list. It is not relevant for block lists.
Value set: SPACE, 'X.
'X' = line size depends on list width
' ' = Line size is set to 80 or MIN_LINESIZE (if > 0) .
7. Min_linesize LIKE sy-linsz: The report output contains a minimum possible length of line. If initial min_linesize is set to 80 by default, then this parameter is used to customize it. The prerequisite for this is that the parameter no_min_linesize should be ' '.
Value set: 0, 10 - 250
If the list is wider, the format uses the list width (maximum 250 or MAX_LINESIZE (if > 0)).
8. Max_linesize LIKE sy-linsz: The default max. Linesize is 250. To change this default value, this parameter can interactively-define the maximum list width setting.
Value set: 0, 80 - 1020
9. Window_titlebar LIKE rsmpe-tittext: To set the titlebar on the report output.
10. No_uline_hs(1) TYPE c.
Exceptions
11. Lights_fieldname TYPE slis_fieldname: Internal output table field containing the codes of exceptions to be output.
Output table field code: '1' = red traffic light
'2' = yellow traffic light
'3' = green traffic light Fieldname for exception
Value set: SPACE, internal output table field name.
12. Lights_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter LIGHTS_FIELDNAME. If LIGHTS_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists. Only relevant for hierarchical-sequential lists.
. Value set: SPACE, internal output table name.
13. Lights_rollname LIKE dfies-rollname: The documentation of this data element is displayed when you call F1 help for an exception column.
Value set: SPACE, data element name.
14. Lights_condense(1) TYPE c : If a list record is output with 'red traffic light', each
Subtotal that includes this record is also output with 'red traffic light'.
Value set: SPACE, 'X'
'X' = the 'maximum' exception of the items in the subtotal is output at subtotal level.
Sums
15. No_sumchoice(1) TYPE c : This parameter allows the choice for summing up
Only by fieldcatalog.
Value set: SPACE, 'X'
'X' = fields which are to be summed, passed by the calling program (FIELDCAT-DO_SUM = 'X'). The user should not be able to change this value interactively.
16. No_totalline(1) TYPE c : Removes the option of having totals after sub-totals.
Value set: SPACE, 'X'
'X' = no total record is to be output. Subtotals can still be calculated and output. The fields in the subtotals are flagged DO_SUM = 'X' in the field list.
17. No_subchoice(1) TYPE c : Does not allow the user to interactively change the field chosen for subtotals.
Value set: SPACE, 'X'
'X' = value whose change triggers subtotals, provided by the calling program. The user should not be able to change this value interactively.
18. No_subtotals(1) TYPE c : No subtotals possible
Value set: SPACE, 'X'
'X' = no subtotals.
19. Numc_sum(1) TYPE c : Totals only possible for NUMC-Fields.
20. No_unit_splitting TYPE c: No separate total lines by inh.units
21.totals_before_items TYPE c: Display totals before the items
22. Totals_only(1) TYPE c : Show only totals
Value set: SPACE, 'X'
'X' = only total records are output.
23. Totals_text(60) TYPE c : Text for 1st col. in totals
Value set: SPACE, string (max.60)
' ' = The first column in the total record contains an appropriate number of '*'s to indicate the total by default. If the first column is wide enough, the string 'Total' is output after the asterisks.
'String = The string passed is output after the total indicated by '*', if the column is wide enough.
24. Subtotals_text(60) TYPE c : Texts for subtotals
Value set: SPACE, string (max.60)
' ' = In the first column of subtotal records, the subtotal is indicated by an appropriate number of '*' by default. If the first column is not a subtotal criterion, the string 'Total' is output after the asterisks, if the column is wide enough.
'String = the string passed is output after the subtotal indicated by '*', if the column is wide enough and the first column is not a subtotal criterion. If it is a subtotal criterion, its value is repeated after the total, if the column is wide enough.
Interaction
25. Box_fieldname TYPE slis_fieldname: Fieldname for checkbox in the report output. If the list has checkboxes at the start of records (for selecting several records), this parameter contains the internal output table field name indicated by the checkbox selection column. The field is a checkbox at the start of list records without a list header.
Value set: SPACE, internal output table field name
26. Box_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter BOX_FIELDNAME. If BOX_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists.
Value set: SPACE, internal output table name.
27. Box_rollname LIKE dd03p-rollname: rollname for checkbox
28. Expand_fieldname TYPE slis_fieldname: fieldname flag expand. The user can show or hide the items by clicking on the folder symbol (hotspot). If the items for a header entry are only to be read by the calling program and passed to ALV when a header has been expanded interactively, this can be controlled via the CALLBACK event 'ITEM_DATA_EXPAND'.
29. Hotspot_fieldname TYPE slis_fieldname: Used to make the fieldname flag hotspot.
30. No_input(1) TYPE c : The fields are only display fields.
Value set: SPACE, 'X'
'X' = all ready-for-input fields in a list are displayed as not ready-for-input. (Record selection checkboxes and fields which can be made ready-for-input via the field list parameter FIELDCAT-INPUT = 'X')
31. F2code LIKE sy-ucomm: To assign an ALV standard function code to double-click (F2), assign the function code to this parameter. Ex.: to assign the ALV standard function 'Detail' ('&ETA') to F2.
=> LAYOUT-F2CODE = '&ETA'.
Value set: SPACE, function code
32. Confirmation_prompt: confirm. Prompt when leaving
Value set: SPACE, 'X'
'X' = if one of the functions Back (F03)', Exit (F15)' or Cancel (F12)' occurs, a confirmation prompt appears.
33. Key_hotspot(1) TYPE c : The key fields are displayed as hotspot. The columns defined in the field catalog as key fields (FIELDCAT-KEY = 'X') are output as hotspots, i.e. clicking on a key column (highlighted in color in the list) calls the function under F2.
Value set: SPACE, 'X'.
34. Reprep(1) TYPE c : report report interface active.
35. Group_buttons(1) TYPE c : group-buttons for COL1 - COL5 . Group output fields via FIELDCAT-SP_GROUP in the field list, and pass the group name to the list module in the interface parameter IT_SPECIAL_GROUPS.
Value set: SPACE, 'X'.
36. No_keyfix(1) TYPE c : Used to make the key fields scrollable.
Value set: SPACE, 'X'.
' ' = The key columns defined in the field catalog by FIELDCAT-KEY = 'X' are fixed in the list output. These columns do not scroll horizontally. The item table key columns are fixed in hierarchical-sequential lists. The header table key fields are not considered here.
'X' = key columns not fixed
37. Get_selinfos(1) TYPE c : To read selection screen.
Value set: SPACE, 'X'.
If the calling program is a report with an ABAP/4 selection screen, setting this parameter makes ALV read the selection screen again. If the selections are read successfully, a pushbutton, via which the user can call a popup which lists the report selections in a simple form, becomes active on the results list output by ALV.
38. group_change_edit(1) TYPE c : Settings by user for new group
Value set: SPACE, 'X'
'X' = the user can enter a format option for each sort criterion in the sort/subtotal popup, for the list format when this value changes (e.g. new page or underline).
39. No_scrolling(1) TYPE c : Does not allow scrolling of the list to the right.
Value set: SPACE, 'X'.
40. Expand_all(1) TYPE c : Expand all positions
Detailed screen
40. Detail_popup(1) TYPE c : show detail in popup.
Value set: SPACE, 'X'
' ' = List record detail display in full-screen mode, with top-of-page.
'X' = list record detail display in popup (without top-of-page).
41. Detail_initial_lines(1) TYPE c : show also initial lines
Value set: SPACE, 'X'
' ' = Only fields whose contents are not initial are output in the detail view.
'X' = initial field contents are also output in detail.
41. detail_titlebar(30) type c : Titlebar for detail screen
Value set: SPACE, string (max.30)
` ' = ' Detail: Display' is output as the title of the detail window.
'String = the string passed is output as the title of the detail window.
Display variants
42. Header_text (20) TYPE c: Text for header button. Only relevant for hierarchical-sequential lists. You can toggle between display field and field list views via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The header table field pushbutton text is 'Header' by default.
CHAR (20) = header table field pushbutton text.
43.item_text(20) TYPE c : Text for item button. Only relevant for hierarchical-sequential lists. You can toggle the view between the display fields and the field list via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The pushbutton text for the item table fields is 'Item' by default.
CHAR (20) = item table field pushbutton text.
44.default_ item(1) TYPE c : Items as default. Only relevant for hierarchical-sequential lists.
Value set: SPACE, 'X'
' ' = The header table fields are displayed by default in the display variant definition popup. The user can switch to the item table fields interactively.
'X' = the item table fields are displayed by default in the display variant Definition Popup. The user can switch to the header table fields interactively.
Colour
45. Info_fieldname TYPE slis_fieldname: infofield for listoutput. A whole list record can be colored individually using a color code in a column of the internal output table for the record. Assign the name of the field containing the color code to this parameter.
Value set: SPACE, internal output table field name
The internal output table field must be of type CHAR(3).
The code must have the following syntax: 'Cxy':
C = color (all codes must start with 'C')
X = color number ('1'-'9')
Y = bold ('0' = off, '1' = on)
46. Coltab_fieldname TYPE slis_fieldname: Cells can be colored individually using a color code which is contained in a column of the internal output table for the record containing the cell. Assign the name of the field to this parameter.
Others
47. List_append(1) TYPE c : no call screen. It is only useful to output block-lists without specifying the above modules if the number of list blocks exceeds, or may exceed, the maximum number specified in the block module documentation. These operations are not possible for user-defined block lists.
Example code :
I_LAYOUT-f2code = ws_fcode.
I_LAYOUT-zebra = 'X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-no_keyfix = 'X'.
I_LAYOUT-get_selinfos = 'X'.
I_LAYOUT-no_hotspot = 'X'.
I_LAYOUT-no_input = 'X'.
I_LAYOUT-hotspot_fieldname = FIELDNAME.
I_LAYOUT-no_input = X.
I_LAYOUT-no_vline = `X.
I_LAYOUT-no_colhead = .
I_LAYOUT-lights_condense = ` `.
I_LAYOUT-totals_text = ` `.
I_LAYOUT-subtotals_text = ` `.
I_LAYOUT-totals_only = ` `.
I_LAYOUT-key_hotspot = X.
I_LAYOUT-detail_popup = X.
I_LAYOUT-group_change_edit = X.
I_LAYOUT-GROUP_BUTTONS = X.
Step 6
This step is required to get the selection screen information in the report output.
The prerequisite for this is to set the parameter LAYOUT-GET_SELINFOS of the IMPORTING structure.
The parameters to be passed in the IS_SEL_HIDE table are:
o mode: 'R' = only the entries passed in the internal table IS_SEL_HIDE-T_ENTRIES
Are output in the pop up. Selection info, which the list tool read in the selection screen (when called by a report with a selection screen), is replaced by the values passed.
'S' = the selection info which the list tool read in the selection screen of the calling report are modified by the entries in the table IS_SEL_HIDE-T_ENTRIES.
o t_entries: Selection info table
o t_entries-mode: 'A' = output the selection info for the current table record in the info popup.
'D' = do not output select option or SELNAME parameter selection info in the popup.
o t_entries-selname: (only used in t_entries-mode = 'D') : Name of the select option or parameter.
The following table fields are only used in t_entries-mode = 'A'. They contain the selection information to be added.
t_entries-field: DDIC field name of the field for which selection information is to be output.
t_entries-table: DDIC table names of t_entries-field.
t_entries-stext: Field name in info popup.
If t_entries-field and t_entries-table have been entered, this text is taken from DDIC.
t_entries-valuf: Selection condition 'from' value (external format)
t_entries-valut: Selection condition 'to' value (external format)
t_entries-sign0: (I)nclusive (E)xclusive
t_entries-option: All values of the select options Option field allowed.
Step 6
The Table IT_SORT is populated with the sort criteria for the different fields.
The caller specifies the sorting and/or subtotaling of the basic list in the internal table IT_SORT.
This internal table has the following fields:
o spos : Sort sequence
o fieldname : Internal output table field name
o tabname : Only relevant for hierarchical-sequential lists. Name of the internal output table.
o up : 'X' = sort in ascending order
o down : 'X' = sort in descending order
o subtot : 'X' = subtotal at group value change
o group : '* ' = new page at group value change ,'UL' = underline at group value change
Step 7
The final step in the output of the report is the use of two ALV functions modules.
1. REUSE_ALV_FIELDCATALOG_MERGE
2. REUSE_ALV_LIST_DISPLAY
The first function module is used to pass the field catalog to the report output and merge it with the internal output table.
FUNCTION reuse_alv_fieldcatalog_merge.
""Lokale Schnittstelle:
* IMPORTING
*" VALUE(I_PROGRAM_NAME) LIKE SY-REPID OPTIONAL
*" VALUE(I_INTERNAL_TABNAME) TYPE SLIS_TABNAME OPTIONAL
*" VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*" VALUE(I_CLIENT_NEVER_DISPLAY) TYPE SLIS_CHAR_1
*" DEFAULT 'X'
*" VALUE(I_INCLNAME) LIKE TRDIR-NAME OPTIONAL
*" CHANGING
*" VALUE(CT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV
*" EXCEPTIONS
*" INCONSISTENT_INTERFACE
*" PROGRAM_ERROR
Import parameters
I_PROGRAM_NAME: Program in which the internal output table is declared and populated
I_INTERNAL_TABNAME: Internal output table name
I_STRUCTURE_NAME: Structure name (structure, table, and view)
I_CLIENT_NEVER_DISPL: Hide client fields default X
I_INCLNAME: Data declarations include name
CHANGING parameter
CT_FIELDCAT: Field catalog with field descriptions
The variant based on a program-internal table should only be used for rapid prototyping since the following restrictions apply:
1. Performance is affected since the code of the table definition must always be read and interpreted at runtime.
2. Dictionary reference are only considered if the keywords LIKE or INCLUDE STRUCTURE (not TYPE) are used.
Step 8
The other function module is used to display the internal output table with the contents
FUNCTION reuse_alv_list_display.
""Lokale Schnittstelle:
* IMPORTING
*" VALUE(I_INTERFACE_CHECK) DEFAULT SPACE
*" VALUE(I_CALLBACK_PROGRAM) LIKE SY-REPID DEFAULT SPACE
*" VALUE(I_CALLBACK_PF_STATUS_SET) TYPE SLIS_FORMNAME
*" DEFAULT SPACE
*" VALUE(I_CALLBACK_USER_COMMAND) TYPE SLIS_FORMNAME
*" DEFAULT SPACE
*" VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*" VALUE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*" VALUE(IT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV OPTIONAL
*" VALUE(IT_EXCLUDING) TYPE SLIS_T_EXTAB OPTIONAL
*" VALUE(IT_SPECIAL_GROUPS) TYPE SLIS_T_SP_GROUP_ALV
*" OPTIONAL
*" VALUE(IT_SORT) TYPE SLIS_T_SORTINFO_ALV OPTIONAL
*" VALUE(IT_FILTER) TYPE SLIS_T_FILTER_ALV OPTIONAL
*" VALUE(IS_SEL_HIDE) TYPE SLIS_SEL_HIDE_ALV OPTIONAL
*" VALUE(I_DEFAULT) DEFAULT 'X'
" VALUE(I_SAVE) DEFAULT SPACE
" VALUE(IS_VARIANT) LIKE DISVARIANT
" STRUCTURE DISVARIANT DEFAULT SPACE
" VALUE(IT_EVENTS) TYPE SLIS_T_EVENT OPTIONAL
" VALUE(IT_EVENT_EXIT) TYPE SLIS_T_EVENT_EXIT OPTIONAL
" VALUE(IS_PRINT) TYPE SLIS_PRINT_ALV OPTIONAL
" VALUE(IS_REPREP_ID) TYPE SLIS_REPREP_ID OPTIONAL
" VALUE(I_SCREEN_START_COLUMN) DEFAULT 0
" VALUE(I_SCREEN_START_LINE) DEFAULT 0
" VALUE(I_SCREEN_END_COLUMN) DEFAULT 0
" VALUE(I_SCREEN_END_LINE) DEFAULT 0
" EXPORTING
" VALUE(E_EXIT_CAUSED_BY_CALLER)
" VALUE(ES_EXIT_CAUSED_BY_USER) TYPE SLIS_EXIT_BY_USER
" TABLES
" T_OUTTAB
" EXCEPTIONS
" PROGRAM_ERROR
Import parameters
I_INTERFACE_CHECK: Interface consistency check log output.
I_CALLBACK_PROGRAM: Name of the calling program
I_CALLBACK_PF_STATUS_SET: Set EXIT routine to status.
I_CALLBACK_USER_COMMAND: EXIT routine for command handling
I_STRUCTURE_NAME: Internal output table structure name
IS_LAYOUT: List layout specifications
IT_FIELDCAT: Field catalog with field descriptions
IT_EXCLUDING: Table of inactive function codes
IT_SPECIAL_GROUPS: Grouping fields for column selection
IT_SORT: Sort criteria for first list display
IT_FILTER: Filter criteria for first list output
IS_SEL_HIDE : Selection information modification
I_DEFAULT: Initial variant active/inactive logic
I_SAVE: Variants can be saved
IS_VARIANT : Variant information
IT_EVENTS: Table of events to perform IT_EVENT_EXIT : Standard fcode exit requests table
IS_PRINT: Print information
IS_REPREP_ID: Initialization keys for Re/Re interface
I_SCREEN_START_COLUMN: Coordinates for list in dialog box
I_SCREEN_START_LINE: Coordinates for list in dialog box
I_SCREEN_END_COLUMN: Coordinates for list in dialog box
I_SCREEN_END_LINE: Coordinates f -
Hi all,
I am using alv to display Currency fields in a tax return report.........I want to display the sum of a perticular column or all the columns when i press the total button from alv selecting the required columns. But its coming only for first two columns not for all. Please help.
Regards.Hi,
This ALV program have all the basic report requirements such as page heading, page no, sub-total and a grand total.
* This is a basic ALV with the followings:-
* - Page Heading
* - Page No
* - Sub-Total
* - Grand Total
REPORT ZALV.
TYPE-POOLS: SLIS.
DATA: G_REPID LIKE SY-REPID,
GS_PRINT TYPE SLIS_PRINT_ALV,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GT_EVENTS TYPE SLIS_T_EVENT,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF GT_FIELDCAT,
COL_POS TYPE I.
DATA: BEGIN OF ITAB,
FIELD1(5) TYPE C,
FIELD2(5) TYPE C,
FIELD3(5) TYPE P DECIMALS 2,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB1.
DATA: BEGIN OF ITAB_FIELDCAT OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB_FIELDCAT.
* Print Parameters
PARAMETERS:
P_PRINT AS CHECKBOX DEFAULT ' ', "PRINT IMMEDIATE
P_NOSINF AS CHECKBOX DEFAULT 'X', "NO SELECTION INFO
P_NOCOVE AS CHECKBOX DEFAULT ' ', "NO COVER PAGE
P_NONEWP AS CHECKBOX DEFAULT ' ', "NO NEW PAGE
P_NOLINF AS CHECKBOX DEFAULT 'X', "NO PRINT LIST INFO
P_RESERV TYPE I. "NO OF FOOTER LINE
INITIALIZATION.
G_REPID = SY-REPID.
PERFORM PRINT_BUILD USING GS_PRINT. "Print PARAMETERS
START-OF-SELECTION.
* TEST DATA
MOVE 'TEST1' TO ITAB1-FIELD1.
MOVE 'TEST1' TO ITAB1-FIELD2.
MOVE '10.00' TO ITAB1-FIELD3.
APPEND ITAB1.
MOVE 'TEST2' TO ITAB1-FIELD1.
MOVE 'TEST2' TO ITAB1-FIELD2.
MOVE '20.00' TO ITAB1-FIELD3.
APPEND ITAB1.
DO 50 TIMES.
APPEND ITAB1.
ENDDO.
END-OF-SELECTION.
PERFORM BUILD.
PERFORM EVENTTAB_BUILD CHANGING GT_EVENTS.
PERFORM COMMENT_BUILD CHANGING GT_LIST_TOP_OF_PAGE.
PERFORM CALL_ALV.
FORM BUILD.
* DATA FIELD CATALOG
* Explain Field Description to ALV
DATA: FIELDCAT_IN TYPE SLIS_FIELDCAT_ALV.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD1'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
FIELDCAT_LN-KEY = ' '. "SUBTOTAL KEY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-SELTEXT_L = 'HEAD1'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD2'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-NO_OUT = 'X'.
FIELDCAT_LN-SELTEXT_L = 'HEAD2'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD3'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-REF_FIELDNAME = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
FIELDCAT_LN-REF_TABNAME = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-DO_SUM = 'X'. "SUM UPON DISPLAY
APPEND FIELDCAT_LN TO GT_FIELDCAT.
* DATA SORTING AND SUBTOTAL
DATA: GS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD1'.
GS_SORT-SPOS = 1.
GS_SORT-UP = 'X'.
GS_SORT-SUBTOT = 'X'.
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD2'.
GS_SORT-SPOS = 2.
GS_SORT-UP = 'X'.
*GS_SORT-SUBTOT = 'X'.
APPEND GS_SORT TO GT_SORT.
ENDFORM.
FORM CALL_ALV.
* ABAP List Viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'ITAB1'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT[]
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
* IT_EVENT_EXIT =
IS_PRINT = GS_PRINT
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM.
* HEADER FORM
FORM EVENTTAB_BUILD CHANGING LT_EVENTS TYPE SLIS_T_EVENT.
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = LT_EVENTS.
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
* define END_OF_PAGE event
* READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
* INTO LS_EVENT.
* IF SY-SUBRC = 0.
* MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
* APPEND LS_EVENT TO LT_EVENTS.
* ENDIF.
ENDFORM.
FORM COMMENT_BUILD CHANGING GT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: GS_LINE TYPE SLIS_LISTHEADER.
CLEAR GS_LINE.
GS_LINE-TYP = 'H'.
GS_LINE-INFO = 'HEADER 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'S'.
GS_LINE-KEY = 'STATUS 1'.
GS_LINE-INFO = 'INFO 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
GS_LINE-KEY = 'STATUS 2'.
GS_LINE-INFO = 'INFO 2'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
* CLEAR GS_LINE.
* GS_LINE-TYP = 'A'.
* GS_LINE-INFO = 'ACTION'.
* APPEND GS_LINE TO GT_TOP_OF_PAGE.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
WRITE: SY-DATUM, 'Page No', SY-PAGNO LEFT-JUSTIFIED.
ENDFORM.
FORM END_OF_PAGE.
WRITE at (sy-linsz) sy-pagno CENTERED.
ENDFORM.
* PRINT SETTINGS
FORM PRINT_BUILD USING LS_PRINT TYPE SLIS_PRINT_ALV.
LS_PRINT-PRINT = P_PRINT. "PRINT IMMEDIATE
LS_PRINT-NO_PRINT_SELINFOS = P_NOSINF. "NO SELECTION INFO
LS_PRINT-NO_COVERPAGE = P_NOCOVE. "NO COVER PAGE
LS_PRINT-NO_NEW_PAGE = P_NONEWP.
LS_PRINT-NO_PRINT_LISTINFOS = P_NOLINF. "NO PRINT LIST INFO
LS_PRINT-RESERVE_LINES = P_RESERV.
ENDFORM.
*END OF ZALV PROGRAM
Regards
Sudheer -
Totals and Sub-Totals in ALV GRID
Could anyone advice, how to display sub-totals and totals in ALV Grid(using FM).
Ex: value1 value2
100 50
200 50
subtotal 300 100
total 400
Thanks in advance...Refer below demo code and see perform Sort_list..
it wil serve ur purpose.
REPORT ZGILL_ALV message-id rp .
type-pools slis.
tables: zgill_main,zgill_details.
data z_fieldcat type slis_t_fieldcat_alv.
data begin of itab occurs 0.
DATA ICON TYPE ICON-ID.
include structure zgill_main.
data salary like zgill_details-salary.
data end of itab.
*data itab1 like table of itab with header line.
data : WA_SORT TYPE SLIS_SORTINFO_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
PARAMETERS: p_list radiobutton group A1,
P_GRID RADIOBUTTON GROUP A1.
SELECT-OPTIONS: S_PERNR FOR ZGILL_MAIN-PERNR.
start-of-selection.
perform fill_itab.
perform sort_list.
**************Start of scenario without container******************************************
*********Method 1***********
perform fill_fieldcat. " Manuallly Preparing Fiedl Catalog
*********Method 2***********
*perform fill_fieldcat1 changing z_fieldcat. "Preparing field catalog with merge function
perform display_alv.
*****************end of scenario without container*****************************************
*& Form fill_itab
text
--> p1 text
<-- p2 text
form fill_itab .
*select * from zgill_main up to 20 rows INTO CORRESPONDING FIELDS OF TABLE itab.
*ITAB1[] = ITAB[].
select apernr aname aorg adob b~salary INTO CORRESPONDING FIELDS OF TABLE itab
from zgill_main as a join zgill_details as b on apernr = bpernr
WHERE A~PERNR IN S_PERNR.
LOOP AT ITAB.
IF ITAB-PERNR < 1111.
ITAB-ICON = '@08@'.
ELSEIF ITAB-PERNR > 1111 AND ITAB-PERNR < 11111111.
ITAB-ICON = '@09@'.
ELSEIF ITAB-PERNR GE 11111111.
ITAB-ICON = '@0A@'.
ENDIF.
MODIFY ITAB INDEX SY-TABIX.
ENDLOOP.
endform. " fill_itab
*& Form display_alv
text
--> p1 text
<-- p2 text
form display_alv .
data repid like sy-repid.
REPID = SY-REPID.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
WA_LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL'.
WA_LAYOUT-TOTALS_TEXT = 'TOTAL'.
IF P_GRID = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = repid
IT_FIELDCAT = IT_FIELDTAB
IT_SORT = IT_SORT
IS_LAYOUT = WA_LAYOUT
TABLES
t_outtab = itab[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
message e016 with 'Error in Display'.
ENDIF.
ELSEIF P_LIST = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = repid
IT_FIELDCAT = IT_FIELDTAB
IT_SORT = IT_SORT
IS_LAYOUT = WA_LAYOUT
TABLES
t_outtab = itab[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
message e016 with 'Error in Display'.
ENDIF.
ENDIF.
endform. " display_alv
*& Form fill_fieldcat1
text
--> p1 text
<-- p2 text
form fill_fieldcat1 changing d_fcat type slis_t_fieldcat_alv.
data repid like sy-repid.
data d_fcat1 type slis_t_fieldcat_alv with header line.
REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = repid
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME = 'ZGILL_MAIN'
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = d_fcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF sy-subrc <> 0.
message e016 with 'Error in preparing fiedl catalog'.
ENDIF.
loop at d_fcat into d_fcat1.
case d_fcat1-fieldname.
when 'NAME'.
d_fcat1-reptext_ddic = 'Emp Name'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'PERNR'.
d_fcat1-reptext_ddic = 'Emp Num'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'ORG'.
d_fcat1-reptext_ddic = 'Org Unit'.
MODIFY D_FCAT FROM D_FCAT1.
endcase.
clear d_fcat1.
endloop.
endform. " fill_fieldcat1
*& Form sort_list
text
--> p1 text
<-- p2 text
form sort_list .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'DOB'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NAME'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
endform. " sort_list
*& Form fill_fieldcat
text
--> p1 text
<-- p2 text
form fill_fieldcat .
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ICON'.
WA_FIELDCAT-SELTEXT_L = 'TRAFFIC'.
WA_FIELDCAT-ICON = 'X'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'PERNR'.
WA_FIELDCAT-SELTEXT_L = 'EMP NUMBER'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
when 'maktx'.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'NAME'.
WA_FIELDCAT-SELTEXT_L = 'EMP NAME'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 15.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ORG'.
WA_FIELDCAT-SELTEXT_L = 'ORG UNIT'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'DOB'.
WA_FIELDCAT-SELTEXT_L = 'BIRTH DATE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 12.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'SALARY'.
WA_FIELDCAT-SELTEXT_L = 'SALARY'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
WA_FIELDCAT-do_sum = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
endform. " fill_fieldcat -
URGENT:-Regarding sub-total in alv code
Hi,
i had made dis report and it is working fine but now i want to add the sub total feature in dis report as it is the new requierment of report.
plzz help me out by providing the code of sub-total feature in dis report .
Help will be definately rewarded. here is d code of report:-
TABLES: ISEG,MARA.
TYPE-POOLS : SLIS.
DATA : DATE1(15) TYPE C,
DATE2(15) TYPE C,
TITLE(65) TYPE C,
DT(25) TYPE C.
DATA : ITEVENT TYPE SLIS_T_EVENT.
DATA: lv_sort TYPE slis_sortinfo_alv,
t_sort type slis_t_sortinfo_alv.
DATA : repid LIKE sy-repid.
INTERNAL TABLE FOR INVENTORY STOCK *****************
DATA: BEGIN OF ITS1 OCCURS 0,
MATNR LIKE ISEG-MATNR,
ITEMID(6) TYPE C,
MEINS LIKE ISEG-MEINS,
MENGE LIKE ISEG-MENGE,
WRTZL LIKE ISEG-WRTZL,
BUCHM LIKE ISEG-BUCHM,
WRTBM LIKE ISEG-WRTBM,
WERKS LIKE ISEG-WERKS,
BUDAT LIKE ISEG-BUDAT,
ZLDAT LIKE ISEG-ZLDAT,
MTART LIKE MARA-MTART,
ITEMDESC LIKE MAKT-MAKTX,
DIFFQTY LIKE ISEG-BUCHM,
DIFFVALUE LIKE ISEG-WRTBM,
GRUND LIKE ISEG-GRUND,
GRTXT LIKE T157E-GRTXT,
BWART LIKE T157E-BWART,
REAS TYPE C LENGTH 15,
END OF ITS1.
data: t_heading type slis_t_listheader.
SELECTION-SCREEN BEGIN OF BLOCK PAR1 WITH FRAME TITLE TEXT-001.
*SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
*********PARAMETERS*********
PARAMETERS : PLANT LIKE ISEG-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : R_DATE FOR ISEG-BUDAT OBLIGATORY NO-EXTENSION,
M_TYPE FOR MARA-MTART,
IT_M FOR MARA-MATNR.
*********DEFINING VARIABLES*********
SELECTION-SCREEN END OF BLOCK par1.
CONCATENATE R_DATE-LOW6(2) '.' R_DATE-LOW4(2) '.' R_DATE-LOW+0(4) INTO DATE1.
CONCATENATE R_DATE-HIGH6(2) '.' R_DATE-HIGH4(2) '.' R_DATE-HIGH+0(4) INTO DATE2.
TOP-OF-PAGE.
PERFORM PG_HEADER.
START-OF-SELECTION.
SELECT AMATNR AMEINS AMENGE AWRTZL ABUCHM AWRTBM AWERKS ABUDAT AZLDAT BMTART AGRUND CBWART
FROM ISEG AS A INNER JOIN MARA AS B ON BMATNR = AMATNR
INNER JOIN MSEG AS C ON AMBLNR = CMBLNR
INTO CORRESPONDING FIELDS OF TABLE ITS1 WHERE BMATNR = AMATNR AND BMEINS = AMEINS AND AWERKS = PLANT AND ABUDAT IN R_DATE AND BMTART IN M_TYPE AND BMATNR IN IT_M.
SORT ITS1 BY MTART.
LOOP AT ITS1.
ITS1-ITEMID = ITS1-MATNR+12(6).
ITS1-DIFFQTY = ITS1-MENGE - ITS1-BUCHM.
ITS1-DIFFVALUE = ITS1-WRTZL - ITS1-WRTBM.
SELECT SINGLE MAKTX FROM MAKT INTO ITS1-ITEMDESC WHERE MATNR = ITS1-MATNR.
SELECT SINGLE GRTXT INTO ITS1-GRTXT FROM T157E WHERE GRUND = ITS1-GRUND AND SPRAS = 'E' AND BWART = ITS1-BWART.
MODIFY ITS1.
ENDLOOP.
PERFORM PRN_SMSTOCK_ALV.
WRITING DATA FROM D TABLES**********
FORM PG_HEADER.
WRITE : 'INVENTORY REPORT PLANT : ', PLANT.
ENDFORM.
*& Form PRN_SMSTOCK_ALV
text
--> p1 text
<-- p2 text
form PRN_SMSTOCK_ALV .
data: w_title type lvc_title,
w_repid type syrepid,
w_comm type slis_formname,
w_status type slis_formname,
x_layout type slis_layout_alv,
t_event type slis_t_event,
t_fieldcat type slis_t_fieldcat_alv,
t_subtot TYPE slis_t_sortinfo_alv,
subtot LIKE LINE OF t_subtot.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
perform set_fieldcat2 using:
1 'MTART' 'MTART' 'MARA' '15' space 'MATERIAL TYPE' space space space space space space space space SPACE t_fieldcat 'L' 'L',
2 'ITEMID' 'ITEMID' 'MARA' '7' space 'ITEM ID' space space space space space space space space SPACE t_fieldcat 'R' 'C',
3 'ITEMDESC' 'MAKTX' 'MAKT' '25' space 'MATERIAL DESCRIPTION' space space space space space space space space SPACE t_fieldcat 'L' 'C',
4 'MEINS' 'MEINS' 'MARA' '5' space 'UOM' space space space space space space space space SPACE t_fieldcat 'C' 'C',
5 'MENGE' 'MENGE' 'ISEG' '13' space 'ORG.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
6 'WRTZL' 'WRTZL' 'ISEG' '13' space 'ORG.INV.VALUE' space space space space space space space space SPACE t_fieldcat 'R' 'C',
7 'BUCHM' 'BUCHM' 'ISEG' '13' space 'PHY.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
8 'WRTBM' 'WRTBM' 'ISEG' '13' space 'PHY.INV.VALUE' space space space space space space space space SPACE t_fieldcat 'R' 'C',
9 'DIFFQTY' 'MENGE' 'ISEG' '13' space 'DIFF.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
10 'DIFFVALUE' 'WRTZL' 'ISEG' '13' space 'DIFF.INV.VALUE' space space space space space space space space SPACE t_fieldcat SPACE 'P',
11 'BUDAT' 'BUDAT' 'ISEG' '18' space 'CORRECTED DATE' space space space space space space space space SPACE t_fieldcat 'C' 'C',
12 'GRTXT' 'GRTXT' 'ISEG' '18' space 'REASON' space space space space space space space space SPACE t_fieldcat 'L' 'L',
13 'REAS' 'REAS' 'ISEG' '18' space 'AUTH.BY' space space space space space space space space SPACE t_fieldcat 'C' 'C'.
x_layout-zebra = 'X'.
perform set_top_page_heading using t_heading t_event.
perform set_events using t_event.
w_status = ''.
w_repid = sy-repid.
w_comm = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = w_repid
it_fieldcat = t_fieldcat
i_Callback_top_of_page = 'Top-of-page'
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
tables
t_outtab = ITS1
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM.
FORM set_fieldcat2 USING
p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
p_subtot
t_fieldcat TYPE slis_t_fieldcat_alv
P_JUST
P_FTYPE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
IF NOT P_JUST IS INITIAL.
WA_FIELDCAT-JUST = P_JUST.
ENDIF.
IF NOT p_edit IS INITIAL.
wa_fieldcat-Input = 'X'.
wa_fieldcat-edit = 'X'.
wa_fieldcat-do_sum = 'x'.
wa_fieldcat-checkbox = 'x'.
wa_fieldcat-hotspot = 'x'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
======================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_heading.
ENDFORM.
form set_top_page_heading using t_heading type slis_t_listheader
t_events type slis_t_event.
data: x_heading type slis_listheader,
x_event type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'PHYSICAL INVENTORY AUDIT REPORT'.
append x_heading to t_heading.
Plant Name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'PLANT : '.
x_heading-info = PLANT.
append x_heading to t_heading.
IF DATE2 = '00.00.0000'.
CONCATENATE DATE1 'to' DATE1 INTO DT SEPARATED BY SPACE.
ELSE.
CONCATENATE DATE1 'to' DATE2 INTO DT SEPARATED BY SPACE.
ENDIF.
X_heading-TYP = 'S'.
X_heading-key = 'PERIOD :'.
X_heading-INFO = DT.
APPEND x_heading TO t_heading.
Control Date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL NO. :'.
x_heading-info = ' ASDFADDFAAS DATE : 11.04.2007'.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
form set_events using t_events type slis_t_event.
data: x_event type line of slis_t_event.
endform.
Edited by: ric .s on Jan 29, 2008 5:21 AMHi,
U can do subtotal for a field based on some other field in ur ALV report using slis_t_sortinfo_alv.
see the sample code below...
data: int_sort TYPE slis_t_sortinfo_alv,
fs_sort TYPE slis_sortinfo_alv.
Sort the output based on ORG UNIT.
CLEAR fs_sort.
fs_sort-fieldname = 'ORGEH'.
fs_sort-subtot = 'X'.
fs_sort-up = 'X'.
APPEND fs_sort TO int_sort.
perform f_alv_catsfieldcat.
Fieldcat calculates the sum for SMPCNT field.
FORM f_alv_catsfieldcat.
DATA: loc_fieldcat TYPE slis_fieldcat_alv.
DEFINE define_field.
clear loc_fieldcat.
loc_fieldcat-fieldname = &1.
loc_fieldcat-seltext_l = &2.
loc_fieldcat-key = &3.
loc_fieldcat-outputlen = &4.
loc_fieldcat-do_sum = &5.
append loc_fieldcat to int_fieldcat.
END-OF-DEFINITION.
REFRESH int_fieldcat.
CLEAR int_fieldcat.
define_field 'PERNR' text-029 'X' '8' ''.
define_field 'ENAME' text-030 '' '40' ''.
define_field 'KOSTL' text-037 '' '10' ''.
define_field 'SMPCNT' text-040 '' '' 'X'.
endform.
Then call REUSE_ALV-GRID_DISPLAY with ur internal table with int_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
it_sort = int_sort
i_callback_pf_status_set = 'F_PF_STATUS_SET'
i_callback_user_command = 'F_USER_COMMAND'
it_fieldcat = int_fieldcat
i_save = 'X'
TABLES
t_outtab = int_outputcpy
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE / 'error'.
ENDIF.
Hope it will help u..
Reward points if helpful
Cheers,
Shanthi
Edited by: shanthi ps on Jan 29, 2008 5:37 AM
Edited by: shanthi ps on Jan 29, 2008 5:38 AM -
Currency wise grand totals IN ALV
Hi friends,
I have problem in alv report, my requirement is want to display the
currency wise grand totals in ALV Report.if any having this idea please
address the solution.
yours
ramakrishna.Yif i am not wrong then ithink you are talking about subtotal as per currency .
then you have to use sort fnality..
you have to write your fieldcat for currency value field
wfieldcat-do_sum = 'X'.
data : isort type slis_t_sortinfo_alv,
wsort type slis_sortinfo_alv.
wsort-spos = 1.
wsort-up = 'X'.
wsort-fieldname = ' YOUR CURRency key field in caps'.
wsort-group = 'UL'.
append wsort to isort.
you have to pass that to reuse alv fm it_sort = isort.
regards
shiba dutta -
Validation I/P Enabled field in the ALV grid
Hi all,
Which method is used for validating a value entered in a reprot output field of an ALV Grid OO report.
can some one please throw some light on this.
with a few example programs where it has been implemented.
RegrdsHi sushi,
check this Program : BCALV_EDIT_04
to check out, Execute it , select the checkbox , and give any non numeric amount in the amount field , it will display an error -
hi,
i am making report in alv in which i have to display the sub totals and den full total.
is it possible to display sub total in ALV acccording to material type wise or itemid wise.
plzz help me with some example.
If find useful he or she will definately rewarded.........Hi,
The following example for sub totall for ALV report..
u have to pass do_sum = 'X'. for perticuler fileds.
if it is use full answer reward me a points..
*& Report ZDEL_ALV1
*Description: This ALV interactive report is display Delivary
status
REPORT zdel_alv1 NO STANDARD PAGE HEADING LINE-SIZE 255 LINE-COUNT 60.
*TABLE DECLARATION
TABLES : likp, "Delivery Header Data
lips, "Delivery item Data
vbup. "sales document item status
TYPE-POOLS : slis.
*SRUCTURE DECLARATION
*THIS TABLE FOR HEADER DETAILS
TYPES : BEGIN OF t_likp ,
vbeln LIKE likp-vbeln, "Delivery number
kosta like vbup-kosta,
kunnr LIKE likp-kunnr, "Customer number
wadat LIKE likp-wadat, "Planned goods movement date
ernam LIKE likp-ernam, "Name of person
vkorg LIKE likp-vkorg, "Sales organization
lfart LIKE likp-lfart, "DELIVERY TYPE
ntgew LIKE likp-ntgew, "NET WEIGHT
END OF t_likp.
*THIS TABLE FOR ITEM DETAILS
TYPES : BEGIN OF t_lips ,
vbeln LIKE lips-vbeln, "Delivery number
posnr LIKE lips-posnr, "delivery item
matnr LIKE lips-matnr, "Material number
lfimg LIKE lips-lfimg, "Actual quantity delivered
ntgew LIKE lips-ntgew, "Net weight
exbwr LIKE lips-exbwr, "Externally entered posting amount
arktx LIKE lips-arktx, "Short text SO Item
END OF t_lips.
*THIS IS FOR FINAL OUTPUT
TYPES : BEGIN OF t_vbup ,
vbeln LIKE likp-vbeln, "Delivery number
kosta LIKE vbup-kosta, "Picking status/Putaway status
posnr LIKE vbup-posnr, "delivery item
matnr LIKE lips-matnr, "Material number
lfimg LIKE lips-lfimg, "Actual quantity delivered
ntgew LIKE lips-ntgew, "Net weight
exbwr LIKE lips-exbwr, "Externally entered posting amount
arktx LIKE lips-arktx, "SHORT text SO Item
description(20), "for display text
END OF t_vbup.
*INTERNAL TABLES
DATA : i_likp TYPE STANDARD TABLE OF t_likp.
DATA : i_lips TYPE STANDARD TABLE OF t_lips.
DATA : i_vbup TYPE STANDARD TABLE OF t_vbup.
DATA : repid LIKE sy-repid.
DATA : delivar1(10) TYPE c.
*WORK AREA
DATA : wa_likp TYPE t_likp.
DATA : wa_lips TYPE t_lips.
DATA : wa_vbup TYPE t_vbup.
DATA: i_vbup1 LIKE wa_vbup OCCURS 0 WITH HEADER LINE.
*SLIS TABLE DECLARATIONS
DATA: i_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
i_events TYPE slis_t_event,
w_events TYPE slis_alv_event,
i_fieldcat1 TYPE slis_t_fieldcat_alv WITH HEADER LINE,
i_layout TYPE slis_layout_alv.
*SELECTING RANGE OF VALUES
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_vbeln FOR likp-vbeln,
s_kunnr FOR likp-kunnr,
s_wadat FOR likp-wadat.
SELECTION-SCREEN END OF BLOCK b1 .
*CHOOSE ONE CHECK BOX FOR DISPLAYING THE DELIVARY STATUS
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : cb_kostc AS CHECKBOX,"DEFAULT 'X',
cb_kosta AS CHECKBOX,
cb_kostb AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b2.
*INTIALIZATION CHECK
INITIALIZATION.
repid = sy-repid.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_field.
PERFORM GET_EVENTS.
PERFORM display.
*END-OF-SELECTION
END-OF-SELECTION.
*& Form RUCOMM
This form getting details from lips table for displaying
the item details and all select statements for delivary status
-->R_UCOMM text
-->RS_SELFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
IF rs_selfield-fieldname = 'VBELN'.
delivar1 = rs_selfield-value.
ENDIF.
IF cb_kostc = 'X'.
SELECT VBELN KOSTA FROM VBUP
INTO TABLE I_VBUP
WHERE VBELN IN DELIVAR
AND KOSTA = 'C'.
SELECT VBELN MATNR LFIMG EXBWR INTO TABLE I_LIPS FROM LIPS
WHERE VBELN EQ DELIVAR1.
REFRESH i_vbup1[].
CLEAR i_vbup1.
SELECT avbeln akosta bposnr bmatnr blfimg bntgew b~exbwr
b~arktx
INTO TABLE i_vbup
FROM vbup AS a INNER JOIN lips AS b
ON avbeln = bvbeln
WHERE a~vbeln EQ delivar1
AND kosta = 'C'.
ELSEIF cb_kosta = 'X'.
SELECT VBELN KOSTA FROM VBUP
INTO TABLE I_VBUP
WHERE VBELN IN DELIVAR
AND KOSTA = 'A'.
SELECT avbeln akosta bposnr bmatnr blfimg bntgew b~exbwr
b~arktx
INTO TABLE i_vbup
FROM vbup AS a INNER JOIN lips AS b
ON avbeln = bvbeln
WHERE a~vbeln EQ delivar1
AND kosta = 'A'.
ELSEIF cb_kostb = 'X'.
SELECT VBELN KOSTA FROM VBUP
INTO TABLE I_VBUP
WHERE VBELN IN DELIVAR
AND KOSTA = 'B'.
SELECT avbeln akosta bposnr bmatnr blfimg bntgew b~exbwr
b~arktx
INTO TABLE i_vbup
FROM vbup AS a INNER JOIN lips AS b
ON avbeln = bvbeln
WHERE a~vbeln EQ delivar1
AND kosta = 'B'.
ENDIF.
CLEAR i_vbup1.
LOOP AT i_vbup INTO wa_vbup.
i_vbup1-vbeln = wa_vbup-vbeln.
i_vbup1-kosta = wa_vbup-kosta.
IF wa_vbup-kosta = 'C'.
i_vbup1-description = 'COMPLETELY PROCESSED'.
ELSEIF wa_vbup-kosta = 'B'.
i_vbup1-description = 'PARTIALLY PROCESSED'.
ELSEIF wa_vbup-kosta = 'A'.
i_vbup1-description = 'NOT YET PROCESSED'.
ENDIF.
i_vbup1-posnr = wa_vbup-posnr.
i_vbup1-matnr = wa_vbup-matnr.
i_vbup1-lfimg = wa_vbup-lfimg.
i_vbup1-ntgew = wa_vbup-ntgew.
i_vbup1-exbwr = wa_vbup-exbwr.
i_vbup1-arktx = wa_vbup-arktx.
APPEND i_vbup1 .
ENDLOOP.
SORT i_vbup1 BY vbeln matnr lfimg.
DELETE ADJACENT DUPLICATES FROM i_vbup1 COMPARING vbeln matnr lfimg.
SELECT VBELN MATNR LFIMG EXBWR INTO TABLE I_LIPS FROM LIPS
WHERE VBELN EQ DELIVAR1.
*This function module for displaying the item details
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = repid
it_fieldcat = i_fieldcat1[]
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_user_command = 'USER_COMMAND1'
it_events = i_events
TABLES
t_outtab = i_vbup1
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR i_vbup1.
ENDFORM. "RUCOMM
*& Form USER_COMMAND1
text
-->R_UCOMM1 text
-->RS_SELFIELDtext
FORM user_command1 USING r_ucomm1 LIKE sy-ucomm rs_selfield1 TYPE
slis_selfield.
DATA: deliv(10) TYPE c.
IF rs_selfield1 = 'VBELN'.
deliv = rs_selfield1-value.
ENDIF.
SET PARAMETER ID 'VL' FIELD delivar1.
CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
ENDFORM. "USER_COMMAND1
*& Form GET_DATA
This form for getting the data from likp table
--> p1 text
<-- p2 text
FORM get_data .
SELECT VBELN KUNNR WADAT FROM LIKP INTO TABLE I_LIKP
WHERE VBELN IN S_VBELN
AND KUNNR IN S_KUNNR
AND WADAT IN S_WADAT.
REFRESH i_likp[].
CLEAR i_likp.
IF cb_kostc = 'X' AND cb_kosta = ' ' AND cb_kostb = ''.
SELECT avbeln akosta bkunnr bwadat bernam bvkorg blfart bntgew
INTO TABLE i_likp
FROM vbup AS a INNER JOIN likp AS b
ON avbeln = bvbeln
WHERE
b~kunnr IN s_kunnr
AND b~vbeln IN s_vbeln
AND b~wadat IN s_wadat
AND a~kosta = 'C'.
ELSEIF cb_kosta = 'X' AND cb_kostb = ' ' AND cb_kostc = ''.
SELECT avbeln akosta bkunnr bwadat bernam bvkorg blfart bntgew
INTO TABLE i_likp
FROM vbup AS a INNER JOIN likp AS b
ON avbeln = bvbeln
WHERE
b~kunnr IN s_kunnr
AND b~vbeln IN s_vbeln
AND b~wadat IN s_wadat
AND a~kosta = 'A'.
ELSEIF cb_kostb = 'X' AND cb_kosta = '' AND cb_kostc = ''.
SELECT avbeln akosta bkunnr bwadat bernam bvkorg blfart bntgew
INTO TABLE i_likp
FROM vbup AS a INNER JOIN likp AS b
ON avbeln = bvbeln
WHERE
b~kunnr IN s_kunnr
AND b~vbeln IN s_vbeln
AND b~wadat IN s_wadat
AND kosta = 'B'.
ELSEIF cb_kostc = 'X' AND cb_kosta = 'X' AND cb_kostb = 'X'.
SELECT avbeln akosta bkunnr bwadat bernam bvkorg blfart bntgew
INTO TABLE i_likp
FROM vbup AS a INNER JOIN likp AS b
ON avbeln = bvbeln
WHERE
b~kunnr IN s_kunnr
AND b~vbeln IN s_vbeln
AND b~wadat IN s_wadat
AND kosta NE ' '.
ENDIF.
DELETE ADJACENT DUPLICATES FROM i_likp.
ENDFORM. " GET_DATA
*& Form GET_FIELD
This form for defining the every fields from likp & lips tables
FORM get_field .
*This fields are retrieving from header table(likp)
CLEAR i_fieldcat.
i_fieldcat-fieldname = 'VBELN'.
i_fieldcat-seltext_m = 'SALES ORDER NO'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-fieldname = 'KUNNR'.
i_fieldcat-seltext_m = 'CUSTOMER NO'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-fieldname = 'WADAT'.
i_fieldcat-seltext_m = 'DATE'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-fieldname = 'ERNAM'.
i_fieldcat-seltext_m = 'NAME OF PERSON'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-fieldname = 'VKORG'.
i_fieldcat-seltext_m = 'SALES ORGANIZATION'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-fieldname = 'LFART'.
i_fieldcat-seltext_m = 'DELIVERY TYPE'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-fieldname = 'NTGEW'.
i_fieldcat-seltext_m = 'NET WEIGHT'.
i_fieldcat-do_sum = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
*This fields are retrieving from item table(lips)
CLEAR i_fieldcat1.
i_fieldcat1-fieldname = 'VBELN'.
i_fieldcat1-seltext_m = 'DELIVAR NO'.
APPEND i_fieldcat1 TO i_fieldcat1.
CLEAR i_fieldcat1.
i_fieldcat1-fieldname = 'POSNR'.
i_fieldcat1-seltext_m = 'DELIVERY ITEM'.
APPEND i_fieldcat1 TO i_fieldcat1.
CLEAR i_fieldcat1.
i_fieldcat1-fieldname = 'MATNR'.
i_fieldcat1-seltext_m = 'MATERIAL NO'.
APPEND i_fieldcat1 TO i_fieldcat1.
CLEAR i_fieldcat1.
i_fieldcat1-fieldname = 'LFIMG'.
i_fieldcat1-seltext_m = 'ACTUAL QUANTITY'.
i_fieldcat1-do_sum = 'X'.
APPEND i_fieldcat1 TO i_fieldcat1.
CLEAR i_fieldcat1.
i_fieldcat1-fieldname = 'NTGEW'.
i_fieldcat1-seltext_m = 'NET WEIGHT'.
i_fieldcat1-do_sum = 'X'.
APPEND i_fieldcat1 TO i_fieldcat1.
CLEAR i_fieldcat1.
i_fieldcat1-fieldname = 'EXBWR'.
i_fieldcat1-seltext_m = 'AMOUNT'.
APPEND i_fieldcat1 TO i_fieldcat1.
CLEAR i_fieldcat1.
i_fieldcat1-fieldname = 'ARKTX'.
i_fieldcat1-seltext_m = 'SHORT TEXT FOR so ITEM'.
APPEND i_fieldcat1 TO i_fieldcat1.
CLEAR i_fieldcat1.
i_fieldcat1-fieldname = 'DESCRIPTION'.
i_fieldcat1-seltext_m = 'PICKING STATUS'.
APPEND i_fieldcat1 TO i_fieldcat1.
CLEAR i_fieldcat1.
ENDFORM. " GET_FIELD
*& Form GET_EVENTS
This form defining the events
*FORM GET_EVENTS .
CLEAR W_EVENTS.
W_EVENTS-NAME = 'USER_COMMAND'.
W_EVENTS-FORM = 'RUCOMM'.
APPEND W_EVENTS TO I_EVENTS.
*ENDFORM. " GET_EVENTS
*& Form DISPLAY
This form is going to display header details from likp table
FORM display .
*This function module for displaying the header details
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = repid
i_callback_top_of_page = 'TOP-OF-PAGE'
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = i_fieldcat[]
i_save = 'X'
it_events = i_events
TABLES
t_outtab = i_likp
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY
*& Form TOP-OF-PAGE
This form is going to display top-of-page header text
FORM top-of-page.
DATA: i_list_comments TYPE slis_t_listheader.
DATA: w_list_comments TYPE slis_listheader.
CLEAR: i_list_comments[].
w_list_comments-typ = 'H'. "H=Header, S=Selection, A=Action
w_list_comments-info = 'DELIVERY ORDER DETAILS'.
APPEND w_list_comments TO i_list_comments.
w_list_comments-typ = 'A'. " H = Header, S = Selection, A = Action
w_list_comments-info = 'Basic list'.
APPEND w_list_comments TO i_list_comments.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'enjoy'
it_list_commentary = i_list_comments.
ENDFORM. "TOP-OF-PAGE
*& Form TOP_OF_PAGE
This form is going to display top-of-page item text
FORM top_of_page.
DATA: i_list_comments TYPE slis_t_listheader.
DATA: w_list_comments TYPE slis_listheader.
DATA : i_line LIKE w_list_comments-info.
CONCATENATE 'DELIVERY ITEM DETAILS :' delivar1 INTO i_line .
SEPARATED BY SPACE.
CLEAR: i_list_comments[].
w_list_comments-typ = 'H'. "H=Header, S=Selection, A=Action
w_list_comments-info = i_line.
APPEND w_list_comments TO i_list_comments.
w_list_comments-typ = 'A'. " H = Header, S = Selection, A = Action
w_list_comments-info = 'Secondary list'.
APPEND w_list_comments TO i_list_comments.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'enjoy'
it_list_commentary = i_list_comments.
ENDFORM. "TOP_OF_PAGE
Maybe you are looking for
-
Enabling Third-party Components in Creator 2
Probably not for the general Creator user, but for third-party component developers who want to get their components to work in Creator, I just finished a draft that I've posted to http://wiki.java.net/bin/view/Javatools/CustomComponentLibraries. Ple
-
Problem with IIS- WebLogic bridge
Hi! We have configured the IIS-WebLogic bridge for WebLogic 6.0 (SP1), with IIS 4.0 on two separate machines. This works on URLs which directly refer to pages lying on the same machine as WebLogic, but some links which refer to WebLogic properties fi
-
Hi, We are getting the below exception in an ESS application. I have not analysed any Java exceptions before. I want to know what all useful information this exception provides other than the obvious 'User INDUARV does not exist/not attached in this
-
I have a ipad and i can open a dmg file?
I cant seem to open a dmg file in any of the apps i have on my ipad and i am not very good with technology so i dont know what to do?? Please help!
-
Are any Credit Memo with only Values?
Hi All, I am using 2005A but I have not found a way to issue credit memo for an item with only value (not 'moving' quantity. This is helpful when a client obtains a sales target at the end of year get a credit memo as Sales Bonus. Any Idea? Is it sol