Nvidia driver causes "INIT: Id "x" respawning too fast"

Hi. I'm having lot's of trouble getting my nvidia card working. I checked out more threads than I'd like to list. Although there's lot's of stuff on this error, there's little on nvidia (more on radeon, but nothing helped so far). I've looked at
http://bbs.archbang.org/viewtopic.php?id=2889
among other arch forum threads and non-arch forum pages too.
This is a new install on an ASUS N53S.
During my initial install of Arch, I went with the xf86-video-intel-sna driver because the wiki recommended installing proprietary nvidia drivers after X is working. The intel driver worked fine and I got my desktop up and running no problem.
But if I try switching to either the nvidia driver (as per the wiki) or the nouveau driver I get this message at startup (and slim fails to start)
INIT: Id "x" respawning too fast: disabled for 5 minutes
If I try "startxfce4", it spits out some stuff, culminating in "Fatal server error: no screens found"
The card is NVIDIA GeForce GT550M
I can't tell if the problem is with the driver, xorg.conf, or slim (or something else). Any help would be great. Thanks.
Last edited by Pacopag (2012-07-20 14:35:55)

Awesome. Thanks so much for your help. I just followed the Bumblebee wiki, and it seems to be working.
When I do "optirun glxspheres", it takes 5 or 6 seconds to run the thing. Is that normal?
Also, here https://wiki.archlinux.org/index.php/Bu … VIDIA_card
I'm not sure what to make of
options bbswitch load_state=0 unload_state=0
I check the documentation and their example give values of 0 and 1 respectively. It's clear what the values mean, but I'm not sure WHAT is being referred to as loaded and unloaded. What values are the likely ones that I want?

Similar Messages

INIT: Id "c0" respawning too fast: disabled for 5 minutes

try to do a new arch "2007.08 dont't panic" installation on my toshiba notebook.
but get always the errror: INIT: Id "c0" respawning too fast: disabled for 5 minutes
thanks
the output of /etc/initiab looks about like this, have a foto of the /etc/inittab output, if anyone need it.
#/etc/inittab
# Runlevels:
id:2: initdefault
rc::sysinit:/etc/rc.sysinit
rh:06:wait:/etc/rc.shutdown
c0:2:respawn:/sbin/agetty -n -l /etc/login.sh 9600 ttyS0 linux
c1:2:respawn:/sbin/agetty -n -l /etc/login.sh 38400 vc/1 linux
c2:2:respawn:/sbin/agetty -n -l /etc/login.sh 38400 vc/2 linux
c3:2:respawn:/sbin/agetty -n -l /etc/login.sh 38400 vc/3 linux
c4:2:respawn:/sbin/agetty -n -l /etc/login.sh 38400 vc/4 linux
ca::ctraltdel:/sbin/shutdown........
#End of file

started the linuxday archlinux version and checked the /etc/inittab
thiline is not there: c0:2:respawn:/sbin/agetty -n -l /etc/login.sh 9600 ttyS0 linux
I removed it, and then installation works like a flaw.

Start sudden failure: f1 respawning too fast

Hi,
Till yesterday I had a fully working and updated Arch_X86_64/KDE system (inc. pacman 4.0.1-4).
This morning I've tried a full upgrade (pacman -Syu) and:
1. Initially found dependency problems related to (as far as I remember) to one of the gcc libraries. (I removed that library and proceedeed upgrading)
2. A lot of missing or unstrusted. I've run the init key, yet the problem continues.
I decided to reboot intending to rerun pacman -Syu afterwards.
However my system won't boot anymore. It complains as follows:
1. can't open (no such file) libstdc++.so.6
2. "INIT: Id "f1" respawning too fast: disabled for 5 minutes."
That's it.
Please advise how to restore full functionality?
Thanks

Please disable signature checking, at least for now. And you shouldn't face the problem. Read the news here:
http://www.archlinux.org/news/pacman-4-moves-to-core/
In fact it's disabled in the default pacman.conf, so you must've enabled it yourself. Disable it and proceed to upgrade the system.

Slim "Id "x" respawning too fast: disabled for 5 minutes"

Hello Everyone,
Slim "Id "x" respawning too fast: disabled for 5 minutes"
This error drives my crazy I changed to slim after the recent change of gdm.
Since I changed, when I boot my PC this error always occurs. Only solution so far is either to wait for 5 minutes or to change to another TTY#, login and try init 3 and then init 5 (which only works sometimes but most of the time delivers the same error).
The error doesn't occur when I REboot the PC.
I start slim via inittab with "x:5:respawn:/usr/bin/slim >& /dev/null"
I already tried the German Arch-Forum but got no reply.
There is a topic http://bbs.archlinux.org/viewtopic.php?id=81159 with the "solution" to change inittab
"x:5:respawn:/usr/bin/slim >& /dev/null"
to
"x:5:once:/usr/bin/slim >& /dev/null"
but this doesn't work for me, slim then refuses completly to start.
I'd prefer to use the inittab method and not the daemon method...
Thank you in advance
cl10k
PS: Sry for bad English...
Last edited by cl10k (2009-11-24 21:54:18)

Hi,
"generally" X seems to work fine. I use Openbox without any problems. If I try /usr/bin/slim from init 3 it says: "Stale lockfile found, removing it" and then nothing happens - the console just stays on.
I haven't changed my Xorg for ages, I still use the same X configuration (besides updates) that I had years ago with kdm and then with gdm. Even when I switched from gdm to slim I just follwed to wiki and changed the Inittab line from gdm to slim.
Heres my Inittab and my Xorg.conf (to be honest I'm not really fit with Xorg configuration...)
To be sure, I just created a (very basic) new Xorg.conf with nvidia-xconfig.
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
x:5:respawn:/usr/bin/slim >& /dev/null
# End of file
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Tue Oct 20 21:01:12 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG F900B"
HorizSync 30.0 - 98.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: 1280x1024_85 +1280+0, CRT-1: 1280x1024_85 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
EDIT: It seems to work now! Slim started without any errors. I will test that for some days to see if the problem is really gone now.
Just out of curiosity:
A lot seems to have changed in Xorg.conf since my old ~2years old config was made.
I had to turnoff boot logo manually and set Option "Composite" "Enable" but now everything seems to work by default?
Do you see any flaws in my xorg.conf? Any ideas for improvements (except metamodes)?
Last edited by cl10k (2009-11-25 10:47:02)

"INIT: id "x" respawning to fast: disabled for 5 minute"

Hello Archers!
This is my situation… I am running ArchBang! On my Acer Aspire Timeline with all Intel, 320HD, 3GB Ram DDR2 and Intel Mobile 4 Series Express Chipset Family GMA 4500MHD (GM45) 64bit. I understand that this may not be the appropriate place to post my thread but this Forum is my last Resource!
I removed Vesa driver (# pacman –R xf86-video-vesa) and install the Intel driver available in the repositories (# pacman –S xf86-video-intel) then I edit my /boot/grub/grub.cfg and deleted: xorg=vesa nomodeset.
Rebooted and I see the changes right away fonts are looking wonderful but after all deamons finish running I go into this command login screen! Rather than my login manager to then go into my OpenBox window manager. And so I get this weird message "INIT: id "x" respawning to fast: disabled for 5 minute"
I tried uncommenting in my slim.conf:
#/etc/slim.conf
Daemon yes
Per suggested in the ArchBang! forums
I also tried the KMS per the Archwiki Intel… https://wiki.archlinux.org/index.php/Intel
One thing I did not try was installing lib32-intel-dri because my system is 64 bit. But I don't think this step is necessary. Is it?
I have tried other things but have not been successful. Please Help! Any suggestions/guidance and/or tips are highly appreciated.
Happy Holidays,
Luis Caballero

Please don't post multiple threads. Closed your other ones. Consider this your first warning.
For reference, please go to https://wiki.archlinux.org/index.php/Fo … ss-Posting
Actually, please read that whole document.

[SOLVED] nvidia driver causes blank screen soon after boot

Hi,
I have a NVIDIA 560 and was originally using the nouveau driver, but that gave slow performance when doing anything (eg. resizing windows), so I installed the nvidia driver instead by following the wiki section:
https://wiki.archlinux.org/index.php/NV … au_drivers
by essentially just following the scripts given there. After switching to nvidia, the screen goes blank soon after boot. I get back into the system by using nomodeset in menu.cfg.
My question is how do I even begin to find the problem, eg. what log file(s) should I look in and post?
Thanks
Last edited by mark1977 (2012-08-19 17:38:42)

Yes it's the 560 Ti. Thanks I just installed straight from the repos. I've also installed cuda-sdk and cuda-toolkit. I've compiled the libraries inside /opt/cuda-sdk/CUDALibraries fine.
No I go to compile the sdk examples by running make in /opt/cuda-sdk/C and get the following error:
# make
make[1]: Entering directory `/opt/cuda-sdk/C/common'
make[1]: Leaving directory `/opt/cuda-sdk/C/common'
make[1]: Entering directory `/opt/cuda-sdk/C/common'
make[1]: Leaving directory `/opt/cuda-sdk/C/common'
make[1]: Entering directory `/opt/cuda-sdk/C/common'
make[1]: Leaving directory `/opt/cuda-sdk/C/common'
make[1]: Entering directory `/opt/cuda-sdk/shared'
make[1]: Leaving directory `/opt/cuda-sdk/shared'
make[1]: Entering directory `/opt/cuda-sdk/C/src/newdelete'
make[1]: Leaving directory `/opt/cuda-sdk/C/src/newdelete'
make[1]: Entering directory `/opt/cuda-sdk/C/src/simpleTextureDrv'
/usr/bin/ld: cannot find -lcuda
collect2: error: ld returned 1 exit status
make[1]: *** [../../bin/linux/release/simpleTextureDrv] Error 1
make[1]: Leaving directory `/opt/cuda-sdk/C/src/simpleTextureDrv'
make: *** [src/simpleTextureDrv/Makefile.ph_build] Error 2
The Makefile itself essentially seems to just include the file /opt/cuda-sdk/C/common/common.mk, which is:
# Copyright 1993-2011 NVIDIA Corporation. All rights reserved.
# NVIDIA Corporation and its licensors retain all intellectual property and
# proprietary rights in and to this software and related documentation.
# Any use, reproduction, disclosure, or distribution of this software
# and related documentation without an express license agreement from
# NVIDIA Corporation is strictly prohibited.
# Please refer to the applicable NVIDIA end user license agreement (EULA)
# associated with this source code for terms and conditions that govern
# your use of this NVIDIA software.
# Common build script for CUDA source projects for Linux and Mac platforms
.SUFFIXES : .cu .cu_dbg.o .c_dbg.o .cpp_dbg.o .cu_rel.o .c_rel.o .cpp_rel.o .cubin .ptx
# Add new SM Versions here as devices with new Compute Capability are released
SM_VERSIONS := 10 11 12 13 20 21 30
CUDA_INSTALL_PATH ?= /opt/cuda-toolkit
ifdef cuda-install
CUDA_INSTALL_PATH := $(cuda-install)
endif
# detect OS
OSUPPER = $(shell uname -s 2>/dev/null | tr [:lower:] [:upper:])
OSLOWER = $(shell uname -s 2>/dev/null | tr [:upper:] [:lower:])
# 'linux' is output for Linux system, 'darwin' for OS X
DARWIN = $(strip $(findstring DARWIN, $(OSUPPER)))
ifneq ($(DARWIN),)
SNOWLEOPARD = $(strip $(findstring 10.6, $(shell egrep "<string>10\.6" /System/Library/CoreServices/SystemVersion.plist)))
LION = $(strip $(findstring 10.7, $(shell egrep "<string>10\.7" /System/Library/CoreServices/SystemVersion.plist)))
endif
# detect 32-bit or 64-bit platform
HP_64 = $(shell uname -m | grep 64)
OSARCH= $(shell uname -m)
# Basic directory setup for SDK
# (override directories only if they are not already defined)
SRCDIR ?=
ROOTDIR ?= ..
ROOTBINDIR ?= $(ROOTDIR)/../bin
BINDIR ?= $(ROOTBINDIR)/$(OSLOWER)
ROOTOBJDIR ?= obj
LIBDIR := $(ROOTDIR)/../lib
COMMONDIR := $(ROOTDIR)/../common
SHAREDDIR := $(ROOTDIR)/../../shared/
# Compilers
NVCC := $(CUDA_INSTALL_PATH)/bin/nvcc
CXX := g++ -fPIC
CC := gcc -fPIC
LINK := g++ -fPIC
# Includes
INCLUDES += -I. -I$(CUDA_INSTALL_PATH)/include -I$(COMMONDIR)/inc -I$(SHAREDDIR)/inc
# Warning flags
CXXWARN_FLAGS := \
-W -Wall \
-Wimplicit \
-Wswitch \
-Wformat \
-Wchar-subscripts \
-Wparentheses \
-Wmultichar \
-Wtrigraphs \
-Wpointer-arith \
-Wcast-align \
-Wreturn-type \
-Wno-unused-function \
$(SPACE)
CWARN_FLAGS := $(CXXWARN_FLAGS) \
-Wstrict-prototypes \
-Wmissing-prototypes \
-Wmissing-declarations \
-Wnested-externs \
-Wmain \
# architecture flag for nvcc and gcc compilers build
CUBIN_ARCH_FLAG :=
CXX_ARCH_FLAGS :=
NVCCFLAGS :=
LIB_ARCH := $(OSARCH)
# Determining the necessary Cross-Compilation Flags
# 32-bit OS, but we target 64-bit cross compilation
ifeq ($(x86_64),1)
NVCCFLAGS += -m64
LIB_ARCH = x86_64
ifneq ($(DARWIN),)
CXX_ARCH_FLAGS += -arch x86_64
else
CXX_ARCH_FLAGS += -m64
endif
else
# 64-bit OS, and we target 32-bit cross compilation
ifeq ($(i386),1)
NVCCFLAGS += -m32
LIB_ARCH = i386
ifneq ($(DARWIN),)
CXX_ARCH_FLAGS += -arch i386
else
CXX_ARCH_FLAGS += -m32
endif
else
ifeq "$(strip $(HP_64))" ""
LIB_ARCH = i386
NVCCFLAGS += -m32
ifneq ($(DARWIN),)
CXX_ARCH_FLAGS += -arch i386
else
CXX_ARCH_FLAGS += -m32
endif
else
LIB_ARCH = x86_64
NVCCFLAGS += -m64
ifneq ($(DARWIN),)
CXX_ARCH_FLAGS += -arch x86_64
else
CXX_ARCH_FLAGS += -m64
endif
endif
endif
endif
# Compiler-specific flags (by default, we always use sm_10, sm_20, and sm_30), unless we use the SMVERSION template
GENCODE_SM10 := -gencode=arch=compute_10,code=\"sm_10,compute_10\"
GENCODE_SM20 := -gencode=arch=compute_20,code=\"sm_20,compute_20\"
GENCODE_SM30 := -gencode=arch=compute_30,code=\"sm_30,compute_30\"
CXXFLAGS += $(CXXWARN_FLAGS) $(CXX_ARCH_FLAGS)
CFLAGS += $(CWARN_FLAGS) $(CXX_ARCH_FLAGS)
LINKFLAGS += -L/usr/lib
LINK += $(LINKFLAGS) $(CXX_ARCH_FLAGS)
# This option for Mac allows CUDA applications to work without requiring to set DYLD_LIBRARY_PATH
ifneq ($(DARWIN),)
LINK += -Xlinker -rpath $(CUDA_INSTALL_PATH)/lib
endif
# Common flags
COMMONFLAGS += $(INCLUDES) -DUNIX
# If we are enabling GPU based debugging, then we want to use -G, warning that this
# May have a significant impact on GPU device code, since optimizations are turned off
ifeq ($(gpudbg),1)
NVCCFLAGS += -G
dbg = $(gpudbg)
endif
# Debug/release configuration
ifeq ($(dbg),1)
COMMONFLAGS += -g
NVCCFLAGS += -D_DEBUG
CXXFLAGS += -D_DEBUG
CFLAGS += -D_DEBUG
BINSUBDIR := debug
LIBSUFFIX := D
else
COMMONFLAGS += -O2
BINSUBDIR := release
LIBSUFFIX :=
NVCCFLAGS += --compiler-options -fno-strict-aliasing
CXXFLAGS += -fno-strict-aliasing
CFLAGS += -fno-strict-aliasing
endif
# architecture flag for cubin build
CUBIN_ARCH_FLAG :=
# OpenGL is used or not (if it is used, then it is necessary to include GLEW)
ifeq ($(USEGLLIB),1)
ifneq ($(DARWIN),)
OPENGLLIB := -L/System/Library/Frameworks/OpenGL.framework/Libraries
OPENGLLIB += -lGL -lGLU $(COMMONDIR)/lib/$(OSLOWER)/libGLEW.a
else
# this case for linux platforms
OPENGLLIB := -lGL -lGLU -lX11 -lXi -lXmu
# check if x86_64 flag has been set, otherwise, check HP_64 is i386/x86_64
ifeq ($(x86_64),1)
OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
else
ifeq ($(i386),)
ifeq "$(strip $(HP_64))" ""
OPENGLLIB += -lGLEW -L/usr/X11R6/lib
else
OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
endif
endif
endif
# check if i386 flag has been set, otehrwise check HP_64 is i386/x86_64
ifeq ($(i386),1)
OPENGLLIB += -lGLEW -L/usr/X11R6/lib
else
ifeq ($(x86_64),)
ifeq "$(strip $(HP_64))" ""
OPENGLLIB += -lGLEW -L/usr/X11R6/lib
else
OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
endif
endif
endif
endif
endif
ifeq ($(USEGLUT),1)
ifneq ($(DARWIN),)
OPENGLLIB += -framework GLUT
else
ifeq ($(x86_64),1)
OPENGLLIB += -lglut -L/usr/lib64
endif
ifeq ($(i386),1)
OPENGLLIB += -lglut -L/usr/lib
endif
ifeq ($(x86_64),)
ifeq ($(i386),)
OPENGLLIB += -lglut
endif
endif
endif
endif
ifeq ($(USEPARAMGL),1)
PARAMGLLIB := -lparamgl_$(LIB_ARCH)$(LIBSUFFIX)
endif
ifeq ($(USERENDERCHECKGL),1)
RENDERCHECKGLLIB := -lrendercheckgl_$(LIB_ARCH)$(LIBSUFFIX)
endif
ifeq ($(USENVCUVID), 1)
ifneq ($(DARWIN),)
NVCUVIDLIB := -L../../common/lib/darwin -lnvcuvid
endif
endif
# Libs
ifneq ($(DARWIN),)
LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib $(NVCUVIDLIB)
else
ifeq "$(strip $(HP_64))" ""
ifeq ($(x86_64),1)
LIB := -L$(CUDA_INSTALL_PATH)/lib64 -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
else
LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
endif
else
ifeq ($(i386),1)
LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
else
LIB := -L$(CUDA_INSTALL_PATH)/lib64 -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
endif
endif
endif
# If dynamically linking to CUDA and CUDART, we exclude the libraries from the LIB
ifeq ($(USECUDADYNLIB),1)
LIB += ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB} -ldl -rdynamic
else
# static linking, we will statically link against CUDA and CUDART
ifeq ($(USEDRVAPI),1)
LIB += -L/usr/lib -lcuda ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB}
else
ifeq ($(emu),1)
LIB += -lcudartemu
else
LIB += -lcudart
endif
LIB += ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB}
endif
endif
ifeq ($(USECUFFT),1)
ifeq ($(emu),1)
LIB += -lcufftemu
else
LIB += -lcufft
endif
endif
ifeq ($(USECUBLAS),1)
ifeq ($(emu),1)
LIB += -lcublasemu
else
LIB += -lcublas
endif
endif
ifeq ($(USECURAND),1)
LIB += -lcurand
endif
ifeq ($(USECUSPARSE),1)
LIB += -lcusparse
endif
# Lib/exe configuration
# Lib/exe configuration
# Lib/exe configuration
ifneq ($(STATIC_LIB),)
TARGETDIR := $(LIBDIR)
TARGET := $(subst .a,_$(LIB_ARCH)$(LIBSUFFIX).a,$(LIBDIR)/$(STATIC_LIB))
LINKLINE = ar rucv $(TARGET) $(OBJS)
else
ifneq ($(OMIT_CUTIL_LIB),1)
LIB += -lcutil_$(LIB_ARCH)$(LIBSUFFIX)
endif
ifneq ($(OMIT_SHRUTIL_LIB),1)
LIB += -lshrutil_$(LIB_ARCH)$(LIBSUFFIX)
endif
# Device emulation configuration
ifeq ($(emu), 1)
NVCCFLAGS += -deviceemu
CUDACCFLAGS +=
BINSUBDIR := emu$(BINSUBDIR)
# consistency, makes developing easier
CXXFLAGS += -D__DEVICE_EMULATION__
CFLAGS += -D__DEVICE_EMULATION__
endif
TARGETDIR := $(BINDIR)/$(BINSUBDIR)
TARGET := $(TARGETDIR)/$(EXECUTABLE)
LINKLINE = $(LINK) -o $(TARGET) $(OBJS) $(LIB)
endif
# check if verbose
ifeq ($(verbose), 1)
VERBOSE :=
else
VERBOSE := @
endif
# Check for input flags and set compiler flags appropriately
ifeq ($(fastmath), 1)
NVCCFLAGS += -use_fast_math
endif
ifeq ($(keep), 1)
NVCCFLAGS += -keep
NVCC_KEEP_CLEAN := *.i* *.cubin *.cu.c *.cudafe* *.fatbin.c *.ptx
endif
ifdef maxregisters
NVCCFLAGS += -maxrregcount $(maxregisters)
endif
ifeq ($(ptxas), 1)
NVCCFLAGS += --ptxas-options=-v
endif
# Add cudacc flags
NVCCFLAGS += $(CUDACCFLAGS)
# Add common flags
NVCCFLAGS += $(COMMONFLAGS)
CXXFLAGS += $(COMMONFLAGS)
CFLAGS += $(COMMONFLAGS)
ifeq ($(nvcc_warn_verbose),1)
NVCCFLAGS += $(addprefix --compiler-options ,$(CXXWARN_FLAGS))
NVCCFLAGS += --compiler-options -fno-strict-aliasing
endif
# Set up object files
OBJDIR := $(ROOTOBJDIR)/$(LIB_ARCH)/$(BINSUBDIR)
OBJS += $(patsubst %.cpp,$(OBJDIR)/%.cpp.o,$(notdir $(CCFILES)))
OBJS += $(patsubst %.c,$(OBJDIR)/%.c.o,$(notdir $(CFILES)))
OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu.o,$(notdir $(CUFILES)))
# Set up cubin output files
CUBINDIR := $(SRCDIR)data
CUBINS += $(patsubst %.cu,$(CUBINDIR)/%.cubin,$(notdir $(CUBINFILES)))
# Set up PTX output files
PTXDIR := $(SRCDIR)data
PTXBINS += $(patsubst %.cu,$(PTXDIR)/%.ptx,$(notdir $(PTXFILES)))
# Rules
$(OBJDIR)/%.c.o : $(SRCDIR)%.c $(C_DEPS)
$(VERBOSE)$(CC) $(CFLAGS) -o $@ -c $<
$(OBJDIR)/%.cpp.o : $(SRCDIR)%.cpp $(C_DEPS)
$(VERBOSE)$(CXX) $(CXXFLAGS) -o $@ -c $<
# Default arch includes gencode for sm_10, sm_20, sm_30, and other archs from GENCODE_ARCH declared in the makefile
$(OBJDIR)/%.cu.o : $(SRCDIR)%.cu $(CU_DEPS)
$(VERBOSE)$(NVCC) $(GENCODE_SM10) $(GENCODE_ARCH) $(GENCODE_SM20) $(GENCODE_SM30) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -c $<
# Default arch includes gencode for sm_10, sm_20, sm_30, and other archs from GENCODE_ARCH declared in the makefile
$(CUBINDIR)/%.cubin : $(SRCDIR)%.cu cubindirectory
$(VERBOSE)$(NVCC) $(GENCODE_SM10) $(GENCODE_ARCH) $(GENCODE_SM20) $(GENCODE_SM30) $(CUBIN_ARCH_FLAG) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -cubin $<
$(PTXDIR)/%.ptx : $(SRCDIR)%.cu ptxdirectory
$(VERBOSE)$(NVCC) $(CUBIN_ARCH_FLAG) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -ptx $<
# The following definition is a template that gets instantiated for each SM
# version (sm_10, sm_13, etc.) stored in SMVERSIONS. It does 2 things:
# 1. It adds to OBJS a .cu_sm_XX.o for each .cu file it finds in CUFILES_sm_XX.
# 2. It generates a rule for building .cu_sm_XX.o files from the corresponding
# .cu file.
# The intended use for this is to allow Makefiles that use common.mk to compile
# files to different Compute Capability targets (aka SM arch version). To do
# so, in the Makefile, list files for each SM arch separately, like so:
# This will be used over the default rule abov
# CUFILES_sm_10 := mycudakernel_sm10.cu app.cu
# CUFILES_sm_12 := anothercudakernel_sm12.cu
define SMVERSION_template
#OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu_$(1).o,$(notdir $(CUFILES_$(1))))
OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu_$(1).o,$(notdir $(CUFILES_sm_$(1))))
$(OBJDIR)/%.cu_$(1).o : $(SRCDIR)%.cu $(CU_DEPS)
# $(VERBOSE)$(NVCC) -o $$@ -c $$< $(NVCCFLAGS) $(1)
$(VERBOSE)$(NVCC) -gencode=arch=compute_$(1),code=\"sm_$(1),compute_$(1)\" $(GENCODE_SM20) $(GENCODE_SM30) -o $$@ -c $$< $(NVCCFLAGS)
endef
# This line invokes the above template for each arch version stored in
# SM_VERSIONS. The call funtion invokes the template, and the eval
# function interprets it as make commands.
$(foreach smver,$(SM_VERSIONS),$(eval $(call SMVERSION_template,$(smver))))
$(TARGET): makedirectories $(OBJS) $(CUBINS) $(PTXBINS) Makefile
$(VERBOSE)$(LINKLINE)
cubindirectory:
$(VERBOSE)mkdir -p $(CUBINDIR)
ptxdirectory:
$(VERBOSE)mkdir -p $(PTXDIR)
makedirectories:
$(VERBOSE)mkdir -p $(LIBDIR)
$(VERBOSE)mkdir -p $(OBJDIR)
$(VERBOSE)mkdir -p $(TARGETDIR)
tidy :
$(VERBOSE)find . | egrep "#" | xargs rm -f
$(VERBOSE)find . | egrep "\~" | xargs rm -f
clean : tidy
$(VERBOSE)rm -f *.stub.c *.gpu *.cu.cpp *.i *.ii
$(VERBOSE)rm -f *.cubin *.ptx *.fatbin.c *.hash
$(VERBOSE)rm -f *.cudafe1.c *.cudafe2.c *.cudafe1.cpp *.cudafe2.cpp
$(VERBOSE)rm -f $(OBJS)
$(VERBOSE)rm -f $(CUBINS)
$(VERBOSE)rm -f $(PTXBINS)
$(VERBOSE)rm -f $(TARGET)
$(VERBOSE)rm -f $(NVCC_KEEP_CLEAN)
$(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.ppm
$(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.pgm
$(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.bin
$(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.bmp
$(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.txt
$(VERBOSE)rm -f $(CUBINDIR)/*.cubin $(PTXDIR)/*.ptx
$(VERBOSE)rm -rf $(ROOTOBJDIR)
$(VERBOSE)rm -rf $(LIBDIR)
$(VERBOSE)rm -rf $(OBJDIR)
$(VERBOSE)rm -rf $(TARGETDIR)
clobber : clean
$(VERBOSE)rm -rf $(COMMONDIR)/lib/*.a
$(VERBOSE)rm -rf $(SHAREDDIR)/lib/*.a
$(VERBOSE)rm -rf $(COMMONDIR)/obj
$(VERBOSE)rm -rf $(SHAREDDIR)/obj
The output of echo $LD_LIBRARY_PATH is blank.
I have checked for libcuda and can find it:
# ls /usr/lib | grep libcuda
libcuda.so.1
libcuda.so.304.32
Is there something obvious I need to do to get these to compile?
Thanks again.

Problem with nvidia driver, causing system to be unusable

Hello, I've got a problem I assume with nvidia driver. My graphics card is gtx 460, here's my usual glxgears output:
http://dl.dropbox.com/u/16474487/noerror.png
After random amount of time (usually from 30 mins to ~2hours) something 'breaks' and here's what happens:
http://dl.dropbox.com/u/16474487/error.png
I've tried different desktop environments, under xfce4 it also breaks, i've been testing also nvidia-beta and nvidia-all drivers, but it won't help. After 'breaking' i must restart nvidia module, then all again is working fine.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Vazz wrote:Hello, I've got a problem I assume with nvidia driver. My graphics card is gtx 460, here's my usual glxgears output:
http://dl.dropbox.com/u/16474487/noerror.png
After random amount of time (usually from 30 mins to ~2hours) something 'breaks' and here's what happens:
http://dl.dropbox.com/u/16474487/error.png
I've tried different desktop environments, under xfce4 it also breaks, i've been testing also nvidia-beta and nvidia-all drivers, but it won't help. After 'breaking' i must restart nvidia module, then all again is working fine.
Hey Vazz, there is a problem with the nvidia linux drivers/gtx460 hardware, but sadly it only affects a small population.
There is a thread on the nvidia support forums with many others having more or less the same problems.
Still no response from nvidia yet... In the meantime use nouveau.
Last edited by Loafers (2011-01-20 05:13:58)

Id t0 respawning too fast

i have an iomega storcenter ix4-200r that is having issues. when it boots i get the following error:
Id "T0" respawing too fast: disabled for 5 minutes
i've tried too boot to live cd and edit 'inittab' but i am not able to mount the main raid array to get to the file. any suggestions?
Solved!
Go to Solution.

Hello brandonhon
Are you able to access the unit's Lifeline OS web interface after the unit boots?
If so what is the status of the unit from the dashboard and event log?
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

T61 nvidia driver causes font problems

after my last update a new graphics driver for the nvidia quadro 140m was installed.
the new version (7618) caused bad problems with my fonts. (they could not been displayed)
-> only squares for each letter
it took me a have day to find out, that it was the graphic driver (i didn't expected that).
After I reinstalled my fontexplorer and repared my windows installation several times,
it took me another half day to find the download to the old driver again. (7471)
ftp://ftp.software.ibm.com/pc/pccbbs/mobiles/7kd165ww.exe
now it works again with the old driver and i hope there will be an update and at least a notice in the thinkpad system update.
frustrated greets.

Hi Puschl636,
I had a similar problem. I have 3.03a of the presentation director and the most current display driver.
If I boot with dual screens, the first time I do it, I have to open the lid to the laptop and then close it after startup and it will usually move to the dual screen profile.
It may be a temp fix, but after that, as long as I have it docked, the dual screens come up.
Hope that helps!
Roy

Nvidia driver causing problems what should i use?

Hi,
Just switched my hard disk to a temporary machine and the nvidia card on it is causing crashes and random freezes on my machine.
Since its just temporary, I can't be bothered to mess around with the configuration at the moment.
Could someone please tell me what would be the default driver for me to use?
I don't have need for compositing or 3d acceleration.
Thanks in advance,
Ali

Well seeing as how you don't need 3d perhaps nouveau might be worth a shot: http://wiki.archlinux.org/index.php/Nouveau
Word is that eventually it will replace the standard "nv" driver and it will be incorporated into the 2.6.33 kernel. In my experience the nouveau driver is faster than the standard nv.
To use it you will need to remove your current nvidia drivers and then change your xorg.conf to use nouveau. In addition you must enable KMS which is easy enough, see the wiki. I just happened to change from the nvidia blob to nouveau last night after installing KDE 4.4... So far I am satisfied and feel better about supporting the open source driver.
Last edited by davidm (2010-02-11 09:17:50)

NVIDIA driver causes lagginess

When using NVIDIA drivers for my 9600 GT, Gnome 3 is occasionally laggy, especially when entering Activities. However, the nouveau drivers work perfectly. I need the NVIDIA drivers, though, since I would like to play some graphics intensive games. My drivers are up to date (295.xx), any ideas?

Awesome. Thanks so much for your help. I just followed the Bumblebee wiki, and it seems to be working.
When I do "optirun glxspheres", it takes 5 or 6 seconds to run the thing. Is that normal?
Also, here https://wiki.archlinux.org/index.php/Bu … VIDIA_card
I'm not sure what to make of
options bbswitch load_state=0 unload_state=0
I check the documentation and their example give values of 0 and 1 respectively. It's clear what the values mean, but I'm not sure WHAT is being referred to as loaded and unloaded. What values are the likely ones that I want?

Why is "getty respawning too quickly"?

After applying the latest update of Safari my iMac will boot until the bar creeps all the way across the Starting Mac OS X window then hangs.
I brought it up in safe mode and I see the message "getty is respawning too fast. sleeping".
Is there a(n easy) fix for this?

Hi Duane B., and a warm welcome to the forums!
Some device is sending info faster than can be handled.
Sometimes it's a stuck Key on the Keyboard, try starting it without the KB & Mouse, try unplugging Modem/Router, any peripherals you can for a test.

[SOLVED] nVidia driver 195.36.08 causes KDE4.4 to crash after logging?

Hi to all Archers
I noticed the new nVidia driver (195.36.08) on pacman's yesterday updates, I didn't update it immediately and preferred to wait until I was available to fiddle with it in case things went wrong. Apparently, that was the case
Here's what happens if I install the new driver:
KDM starts as usual, I login in, I see KDE loading progress and before it finishes, boom it crashes and returns to KDM login once again.
I tried reinstalling KDE, Xorg and read nVidia wiki to see if there is any hints. I tried once again with a new stock xorg.conf, and removed .nvidia-settings-rc and even disabled KDE compositing but all this couldn't help getting KDE up and running.
However, when I reinstall the previous version (190.53) everything is back to normal.
So what I want to know is am I the only one who gets this problem or there're others here having the same issue?
Because the first time I installed the nVidia driver (almost 3 months now) I used their own installer then used Arch packages afterwards, I suspect that perhaps their installer messed things up !?
For now the solution is to stick to the previous version.
I'm using Arch Linux 32bit and my GC is an nVidia 7300GT.
Regards,
Med
Last edited by stuntgp2000 (2010-03-08 00:17:10)

zero-giulio wrote:
I want to install the 190.53 version of nvidia driver, because it's the correct driver version for my video card, according to nvidia site (see http://www.nvidia.com/object/linux_disp … 0.53.html).
Also, in my prevoius arch system I installed that version and everything worked well. I don't want to try the newerr version. It doesn't matter if 190.53 are not the latest driver available. I'm self confident with the 190.53 version.
How can I install them? The problem is that pacman suggest me only the latest version :-(
You'll find them here http://schlunix.org/archlinux/extra/os/ after choose your system architecture.
if you want to know more about downgrading for more than a few packages read this guide http://wiki.archlinux.org/index.php/Dow … g_Packages
Assuming you have a recent nvidia graphic card and using a i686 system you should download these:
http://schlunix.org/archlinux/extra/os/ … pkg.tar.gz
http://schlunix.org/archlinux/extra/os/ … pkg.tar.gz
Good luck,

Nvidia driver exploded

Ok, I was messing around with the mouse settings in my xorg.conf file, and i go back into X, and I only have 16 colors. When I switch to the nv driver, I have 24 bit color, but no 3D acceleration. I have looked through the log file the x server generates, and it seems that the nvidia driver is loading fine, and I am finding no errors. I feel my video settings are correct, but I am not too confident. Here is my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dbe"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # 
#Option "NoFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # 
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # 
#Option "NvAGP" # 
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # 
#Option "CursorShadowXOffset" # 
#Option "CursorShadowYOffset" # 
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "ForceEmulatedOverlay" # [<bool>]
#Option "TransparentIndex" # 
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # 
#Option "NoBandWidthTest" # [<bool>]
#Option "CustomEDID-CRT-0" # <str>
#Option "CustomEDID-CRT-1" # <str>
#Option "CustomEDID-DFP-0" # <str>
#Option "CustomEDID-DFP-1" # <str>
#Option "CustomEDID-TV-0" # <str>
#Option "CustomEDID-TV-1" # <str>
#Option "TVOverScan" # <f>
#Option "IgnoreDisplayDevices" # <str>
#Option "MultisampleCompatibility" # [<bool>]
#Option "RegistryDwords" # <str>
#Option "NoPowerConnectorCheck" # [<bool>]
#Option "AllowDFPStereo" # [<bool>]
#Option "XvMCUsesTextures" # [<bool>]
#Option "HorizSync" # <str>
#Option "VertRefresh" # <str>
Identifier "Card0"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5200 Ultra]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I will post my X server log, but I need to change the driver over, and grab the output from it first.

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.6.7 i686 [ELF]
Current Operating System: Linux merlin 2.6.7 #1 SMP Wed Jun 16 07:04:51 PDT 2004 i686
Build Date: 10 July 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 24 22:50:09 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev a2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:06:0: chip 10de,006a card 1043,8095 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 02:00:0: chip 10de,0321 card 0000,0000 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b]
(--) PCI:*(2:0:0) nVidia Corporation NV34 [GeForce FX 5200 Ultra] rev 161, Mem @ 0xe0000000/24, 0xd8000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX[b]
[1] -1 0 0xe2001000 - 0xe2001fff (0x1000) MX[b]
[2] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[b]
[3] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX[b]
[4] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX[b]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[b](B)
[8] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[9] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[10] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[11] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[b]
[12] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX[b]
[1] -1 0 0xe2001000 - 0xe2001fff (0x1000) MX[b]
[2] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[b]
[3] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX[b]
[4] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX[b]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[b](B)
[8] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[9] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[10] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[11] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[b]
[12] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX[b]
[6] -1 0 0xe2001000 - 0xe2001fff (0x1000) MX[b]
[7] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[b]
[8] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX[b]
[9] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX[b]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[16] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[18] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[b]
[19] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6106
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.1
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.7.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6106
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) NVIDIA X Driver 1.0-6106 Wed Jun 23 08:14:45 PDT 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 02:00:0
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX[b]
[6] -1 0 0xe2001000 - 0xe2001fff (0x1000) MX[b]
[7] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[b]
[8] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX[b]
[9] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX[b]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[16] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[18] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[b]
[19] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX[b]
[6] -1 0 0xe2001000 - 0xe2001fff (0x1000) MX[b]
[7] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[b]
[8] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX[b]
[9] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX[b]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[19] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[21] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 8/8
(==) NVIDIA(0): Depth 8, (==) framebuffer bpp 8
(==) NVIDIA(0): Default visual is PseudoColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xE0000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 5200 Ultra
(--) NVIDIA(0): VideoBIOS: 04.34.20.23.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0, CRT-1
(WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
(WW) NVIDIA(0): using first display
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 400 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NVIDIA(0): Monitor0: Using default hsync value of 93.75 kHz
(II) NVIDIA(0): Monitor0: Using default vrefresh value of 75.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 400.00 MHz
(II) NVIDIA(0): Not using default mode "640x350" (hsync out of range)
(II) NVIDIA(0): Not using default mode "320x175" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x400" (hsync out of range)
(II) NVIDIA(0): Not using default mode "320x200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "720x400" (hsync out of range)
(II) NVIDIA(0): Not using default mode "360x200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "320x240" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "320x240" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "320x240" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "320x240" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "400x300" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "400x300" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "400x300" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "400x300" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "400x300" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "832x624" (hsync out of range)
(II) NVIDIA(0): Not using default mode "416x312" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "576x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Default mode "1600x1200": 202.5 MHz, 93.8 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(--) NVIDIA(0): Display dimensions: (400, 300) mm
(--) NVIDIA(0): DPI set to (101, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(WW) NVIDIA(0): OpenGL is only supported in depths 16 and 24
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b]
[1] 0 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[b]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX[b]
[8] -1 0 0xe2001000 - 0xe2001fff (0x1000) MX[b]
[9] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[b]
[10] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX[b]
[11] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX[b]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[14] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[21] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[b]
[22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[23] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[b]
[24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[b]
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Setting mode "1600x1200"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!

[Solved] Switch from nvidia driver to nouveau - libgl is seg faulting

Hello,
I recently tried to switch my desktop from using the proprietary nvidia driver to nouveua after having the proprietary driver crash randomly.
I followed the wiki page for this (https://wiki.archlinux.org/index.php/nouveau) where I removed the nvidia driver packages and installed xf86-video-nouveau. I also regenerated the ramdisk image. After all of this I was unable to get xfce to load, although I can get X to successfully start running twm.
The problem seems to be because libGL.so.1 is causing many things segfault. (emacs, xfce4-session). For example, if I run emacs through gdb from the console, the backtrace is from /usr/lib/libGL.so.1.
Any suggestions on things I can try to stop the seg faulting and get a usable system again?
Thanks
Last edited by mikej_96 (2013-12-23 04:13:49)

I did reboot.
Here is the Xorg.0.log from a sucessful twm session:
[ 1948.113]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 1948.113] X Protocol Version 11, Revision 0
[ 1948.113] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 1948.113] Current Operating System: Linux Neo 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
[ 1948.113] Kernel command line: root=/dev/sda1 resume=/dev/sdb3 ro init=/usr/lib/systemd/systemd
[ 1948.113] Build Date: 13 December 2013 03:11:42PM
[ 1948.113]
[ 1948.113] Current version of pixman: 0.32.4
[ 1948.113] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1948.113] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1948.113] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 22 20:09:20 2013
[ 1948.113] (==) Using config file: "/etc/X11/xorg.conf"
[ 1948.113] (==) No Layout section. Using the first Screen section.
[ 1948.113] (==) No screen section available. Using defaults.
[ 1948.113] (**) |-->Screen "Default Screen Section" (0)
[ 1948.113] (**) | |-->Monitor "<default monitor>"
[ 1948.113] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1948.113] (**) | |-->Device "Device0"
[ 1948.113] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1948.113] (**) Option "AutoAddDevices" "False"
[ 1948.113] (**) Not automatically adding devices
[ 1948.113] (==) Automatically enabling devices
[ 1948.113] (==) Automatically adding GPU devices
[ 1948.113] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1948.113] Entry deleted from font path.
[ 1948.113] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 1948.113] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1948.113] (==) |-->Input Device "Mouse0"
[ 1948.113] (==) |-->Input Device "Keyboard0"
[ 1948.113] (==) No Layout section. Using the first mouse device.
[ 1948.113] (==) No Layout section. Using the first keyboard device.
[ 1948.113] (II) Loader magic: 0x7fec20
[ 1948.113] (II) Module ABI versions:
[ 1948.113] X.Org ANSI C Emulation: 0.4
[ 1948.113] X.Org Video Driver: 14.1
[ 1948.113] X.Org XInput driver : 19.1
[ 1948.113] X.Org Server Extension : 7.0
[ 1948.114] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1948.114] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1948.266] (--) PCI:*(0:1:0:0) 10de:1187:1458:360b rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 1948.266] (--) PCI: (0:2:0:0) 10de:0622:3842:c858 rev 161, Mem @ 0xf4000000/16777216, 0xd0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 1948.266] Initializing built-in extension Generic Event Extension
[ 1948.266] Initializing built-in extension SHAPE
[ 1948.266] Initializing built-in extension MIT-SHM
[ 1948.266] Initializing built-in extension XInputExtension
[ 1948.266] Initializing built-in extension XTEST
[ 1948.266] Initializing built-in extension BIG-REQUESTS
[ 1948.266] Initializing built-in extension SYNC
[ 1948.266] Initializing built-in extension XKEYBOARD
[ 1948.266] Initializing built-in extension XC-MISC
[ 1948.266] Initializing built-in extension SECURITY
[ 1948.266] Initializing built-in extension XINERAMA
[ 1948.266] Initializing built-in extension XFIXES
[ 1948.266] Initializing built-in extension RENDER
[ 1948.266] Initializing built-in extension RANDR
[ 1948.266] Initializing built-in extension COMPOSITE
[ 1948.266] Initializing built-in extension DAMAGE
[ 1948.266] Initializing built-in extension MIT-SCREEN-SAVER
[ 1948.266] Initializing built-in extension DOUBLE-BUFFER
[ 1948.266] Initializing built-in extension RECORD
[ 1948.266] Initializing built-in extension DPMS
[ 1948.266] Initializing built-in extension X-Resource
[ 1948.266] Initializing built-in extension XVideo
[ 1948.266] Initializing built-in extension XVideo-MotionCompensation
[ 1948.266] Initializing built-in extension XFree86-VidModeExtension
[ 1948.266] Initializing built-in extension XFree86-DGA
[ 1948.266] Initializing built-in extension XFree86-DRI
[ 1948.266] Initializing built-in extension DRI2
[ 1948.266] (II) LoadModule: "glx"
[ 1948.266] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1948.266] (II) Module glx: vendor="X.Org Foundation"
[ 1948.266] compiled for 1.14.5, module version = 1.0.0
[ 1948.266] ABI class: X.Org Server Extension, version 7.0
[ 1948.266] (==) AIGLX enabled
[ 1948.266] Loading extension GLX
[ 1948.266] (II) LoadModule: "nouveau"
[ 1948.266] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 1948.266] (II) Module nouveau: vendor="X.Org Foundation"
[ 1948.266] compiled for 1.14.4, module version = 1.0.10
[ 1948.266] Module class: X.Org Video Driver
[ 1948.266] ABI class: X.Org Video Driver, version 14.1
[ 1948.266] (II) LoadModule: "mouse"
[ 1948.266] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 1948.266] (II) Module mouse: vendor="X.Org Foundation"
[ 1948.266] compiled for 1.14.0, module version = 1.9.0
[ 1948.266] Module class: X.Org XInput Driver
[ 1948.266] ABI class: X.Org XInput driver, version 19.1
[ 1948.266] (II) LoadModule: "kbd"
[ 1948.266] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 1948.266] (II) Module kbd: vendor="X.Org Foundation"
[ 1948.266] compiled for 1.14.4, module version = 1.8.0
[ 1948.266] Module class: X.Org XInput Driver
[ 1948.266] ABI class: X.Org XInput driver, version 19.1
[ 1948.266] (II) NOUVEAU driver
[ 1948.266] (II) NOUVEAU driver for NVIDIA chipset families :
[ 1948.266] RIVA TNT (NV04)
[ 1948.266] RIVA TNT2 (NV05)
[ 1948.266] GeForce 256 (NV10)
[ 1948.266] GeForce 2 (NV11, NV15)
[ 1948.266] GeForce 4MX (NV17, NV18)
[ 1948.266] GeForce 3 (NV20)
[ 1948.266] GeForce 4Ti (NV25, NV28)
[ 1948.266] GeForce FX (NV3x)
[ 1948.266] GeForce 6 (NV4x)
[ 1948.266] GeForce 7 (G7x)
[ 1948.266] GeForce 8 (G8x)
[ 1948.266] GeForce GTX 200 (NVA0)
[ 1948.266] GeForce GTX 400 (NVC0)
[ 1948.266] (--) using VT number 4
[ 1948.268] (II) [drm] nouveau interface version: 1.1.1
[ 1948.268] (II) [drm] nouveau interface version: 1.1.1
[ 1948.268] (II) Loading sub module "dri2"
[ 1948.268] (II) LoadModule: "dri2"
[ 1948.268] (II) Module "dri2" already built-in
[ 1948.268] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
[ 1948.268] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1948.268] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 1948.268] (==) NOUVEAU(0): RGB weight 888
[ 1948.268] (==) NOUVEAU(0): Default visual is TrueColor
[ 1948.268] (==) NOUVEAU(0): Using HW cursor
[ 1948.268] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 1948.268] (==) NOUVEAU(0): Page flipping enabled
[ 1948.268] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 1948.301] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 1948.331] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 1948.389] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 1948.482] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 1948.511] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 1948.511] (II) NOUVEAU(0): Manufacturer: ACR Model: 1fb Serial#: 55586593
[ 1948.511] (II) NOUVEAU(0): Year: 2010 Week: 35
[ 1948.511] (II) NOUVEAU(0): EDID Version: 1.3
[ 1948.511] (II) NOUVEAU(0): Digital Display Input
[ 1948.511] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 1948.511] (II) NOUVEAU(0): Gamma: 2.20
[ 1948.511] (II) NOUVEAU(0): DPMS capabilities: Off
[ 1948.511] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1948.511] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1948.511] (II) NOUVEAU(0): redX: 0.644 redY: 0.336 greenX: 0.301 greenY: 0.611
[ 1948.511] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 1948.511] (II) NOUVEAU(0): Supported established timings:
[ 1948.511] (II) NOUVEAU(0): 720x400@70Hz
[ 1948.511] (II) NOUVEAU(0): 640x480@60Hz
[ 1948.511] (II) NOUVEAU(0): 640x480@67Hz
[ 1948.511] (II) NOUVEAU(0): 800x600@56Hz
[ 1948.511] (II) NOUVEAU(0): 800x600@60Hz
[ 1948.511] (II) NOUVEAU(0): 1024x768@60Hz
[ 1948.511] (II) NOUVEAU(0): 1024x768@70Hz
[ 1948.511] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1948.511] (II) NOUVEAU(0): Supported standard timings:
[ 1948.511] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1948.511] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1948.511] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1948.511] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1948.511] (II) NOUVEAU(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1948.511] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.511] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 1948.511] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1948.511] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1948.511] (II) NOUVEAU(0): Ranges: V min: 49 V max: 75 Hz, H min: 30 H max: 94 kHz, PixClock max 175 MHz
[ 1948.511] (II) NOUVEAU(0): Monitor name: Acer P236H
[ 1948.511] (II) NOUVEAU(0): Serial No: LQS0W0084321
[ 1948.511] (II) NOUVEAU(0): EDID (in hex):
[ 1948.511] (II) NOUVEAU(0): 00ffffffffffff000472fb01212f5003
[ 1948.512] (II) NOUVEAU(0): 2314010380331d782ac285a4564d9c25
[ 1948.512] (II) NOUVEAU(0): 125054b30c00714f810081809500d1c0
[ 1948.512] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1948.512] (II) NOUVEAU(0): 4500fe1f1100001e000000fd00314b1e
[ 1948.512] (II) NOUVEAU(0): 5e11000a202020202020000000fc0041
[ 1948.512] (II) NOUVEAU(0): 6365722050323336480a2020000000ff
[ 1948.512] (II) NOUVEAU(0): 004c51533057303038343332310a004d
[ 1948.512] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 1948.512] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1948.512] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.512] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1948.541] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 1948.541] (II) NOUVEAU(0): Manufacturer: ACR Model: 1a2 Serial#: 86013623
[ 1948.541] (II) NOUVEAU(0): Year: 2010 Week: 52
[ 1948.541] (II) NOUVEAU(0): EDID Version: 1.3
[ 1948.541] (II) NOUVEAU(0): Digital Display Input
[ 1948.541] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 1948.541] (II) NOUVEAU(0): Gamma: 2.20
[ 1948.541] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 1948.541] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1948.541] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1948.541] (II) NOUVEAU(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
[ 1948.541] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 1948.541] (II) NOUVEAU(0): Supported established timings:
[ 1948.541] (II) NOUVEAU(0): 720x400@70Hz
[ 1948.541] (II) NOUVEAU(0): 640x480@60Hz
[ 1948.541] (II) NOUVEAU(0): 640x480@67Hz
[ 1948.541] (II) NOUVEAU(0): 800x600@56Hz
[ 1948.541] (II) NOUVEAU(0): 800x600@60Hz
[ 1948.541] (II) NOUVEAU(0): 1024x768@60Hz
[ 1948.541] (II) NOUVEAU(0): 1024x768@70Hz
[ 1948.541] (II) NOUVEAU(0): Manufacturer's mask: 10
[ 1948.541] (II) NOUVEAU(0): Supported standard timings:
[ 1948.541] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1948.541] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1948.541] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1948.541] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1948.541] (II) NOUVEAU(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1948.541] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.541] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 1948.541] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1948.541] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1948.541] (II) NOUVEAU(0): Monitor name: P236H
[ 1948.541] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
[ 1948.541] (II) NOUVEAU(0): Serial No: LNW0C0064022
[ 1948.541] (II) NOUVEAU(0): EDID (in hex):
[ 1948.541] (II) NOUVEAU(0): 00ffffffffffff000472a201b7762005
[ 1948.541] (II) NOUVEAU(0): 3414010380331d78ea6085a6564a9c25
[ 1948.541] (II) NOUVEAU(0): 125054b30c10714f810081809500d1c0
[ 1948.541] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1948.541] (II) NOUVEAU(0): 4500fd1e1100001a000000fc00503233
[ 1948.541] (II) NOUVEAU(0): 36480a20202020202020000000fd0038
[ 1948.541] (II) NOUVEAU(0): 4c1f5312000a202020202020000000ff
[ 1948.541] (II) NOUVEAU(0): 004c4e573043303036343032320a0092
[ 1948.541] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 1948.541] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
[ 1948.541] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1948.541] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 1948.541] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 1948.541] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1948.541] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1948.542] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1948.542] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1948.542] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1948.542] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1948.542] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.542] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1948.599] (II) NOUVEAU(0): EDID for output HDMI-1
[ 1948.599] (II) NOUVEAU(0): Manufacturer: ACR Model: 9a Serial#: 2433816882
[ 1948.599] (II) NOUVEAU(0): Year: 2009 Week: 11
[ 1948.599] (II) NOUVEAU(0): EDID Version: 1.3
[ 1948.599] (II) NOUVEAU(0): Digital Display Input
[ 1948.599] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 1948.599] (II) NOUVEAU(0): Gamma: 2.20
[ 1948.599] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 1948.599] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1948.599] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1948.599] (II) NOUVEAU(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
[ 1948.599] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 1948.599] (II) NOUVEAU(0): Supported established timings:
[ 1948.599] (II) NOUVEAU(0): 720x400@70Hz
[ 1948.599] (II) NOUVEAU(0): 640x480@60Hz
[ 1948.599] (II) NOUVEAU(0): 640x480@67Hz
[ 1948.599] (II) NOUVEAU(0): 800x600@56Hz
[ 1948.599] (II) NOUVEAU(0): 800x600@60Hz
[ 1948.599] (II) NOUVEAU(0): 1024x768@60Hz
[ 1948.599] (II) NOUVEAU(0): 1024x768@70Hz
[ 1948.599] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1948.599] (II) NOUVEAU(0): Supported standard timings:
[ 1948.599] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1948.599] (II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1948.599] (II) NOUVEAU(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1948.599] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1948.599] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.599] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 1948.599] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1948.599] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1948.599] (II) NOUVEAU(0): Monitor name: X233H
[ 1948.599] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
[ 1948.599] (II) NOUVEAU(0): Serial No: LFM0C0234041
[ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.599] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 510 x 287 mm
[ 1948.599] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 1948.599] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.599] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 1948.599] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 1948.599] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.599] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 1948.599] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1948.599] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.599] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 1948.599] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 1948.599] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.599] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 1948.599] (II) NOUVEAU(0): h_active: 1920 h_sync: 1972 h_sync_end 2016 h_blank_end 2640 h_border: 0
[ 1948.599] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 1948.599] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 1948.599] (II) NOUVEAU(0): EDID (in hex):
[ 1948.599] (II) NOUVEAU(0): 00ffffffffffff0004729a0032191191
[ 1948.599] (II) NOUVEAU(0): 0b13010380331d78ea6085a6564a9c25
[ 1948.599] (II) NOUVEAU(0): 125054b30c008180714f81009500a940
[ 1948.599] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1948.599] (II) NOUVEAU(0): 4500fe1f1100001a000000fc00583233
[ 1948.599] (II) NOUVEAU(0): 33480a20202020202020000000fd0038
[ 1948.599] (II) NOUVEAU(0): 4c1f5312000a202020202020000000ff
[ 1948.599] (II) NOUVEAU(0): 004c464d3043303233343034310a01ec
[ 1948.599] (II) NOUVEAU(0): 020322f223097f074e01020384050607
[ 1948.599] (II) NOUVEAU(0): 10111215931f148301000066030c0010
[ 1948.599] (II) NOUVEAU(0): 00108c0ad08a20e02d10103e9600fe1f
[ 1948.599] (II) NOUVEAU(0): 11000018011d007251d01e206e285500
[ 1948.599] (II) NOUVEAU(0): fe1f1100001e011d8018711c1620582c
[ 1948.599] (II) NOUVEAU(0): 2500fe1f1100009e011d00bc52d01e20
[ 1948.599] (II) NOUVEAU(0): b8285540fe1f1100001e011d80d0721c
[ 1948.599] (II) NOUVEAU(0): 1620342c2500fe1f1100009e0000003b
[ 1948.599] (II) NOUVEAU(0): Printing probed modes for output HDMI-1
[ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
[ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 1972 2016 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1440x576i"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.600] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): EDID for output DP-1
[ 1948.693] (II) NOUVEAU(0): Manufacturer: ACR Model: 9a Serial#: 2439097283
[ 1948.693] (II) NOUVEAU(0): Year: 2009 Week: 16
[ 1948.693] (II) NOUVEAU(0): EDID Version: 1.3
[ 1948.693] (II) NOUVEAU(0): Digital Display Input
[ 1948.693] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 1948.693] (II) NOUVEAU(0): Gamma: 2.20
[ 1948.693] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 1948.693] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1948.693] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1948.693] (II) NOUVEAU(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
[ 1948.693] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 1948.693] (II) NOUVEAU(0): Supported established timings:
[ 1948.693] (II) NOUVEAU(0): 720x400@70Hz
[ 1948.693] (II) NOUVEAU(0): 640x480@60Hz
[ 1948.693] (II) NOUVEAU(0): 640x480@67Hz
[ 1948.693] (II) NOUVEAU(0): 800x600@56Hz
[ 1948.693] (II) NOUVEAU(0): 800x600@60Hz
[ 1948.693] (II) NOUVEAU(0): 1024x768@60Hz
[ 1948.693] (II) NOUVEAU(0): 1024x768@70Hz
[ 1948.693] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1948.693] (II) NOUVEAU(0): Supported standard timings:
[ 1948.693] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1948.693] (II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1948.693] (II) NOUVEAU(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1948.693] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1948.693] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.693] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 1948.693] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1948.693] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1948.693] (II) NOUVEAU(0): Monitor name: X233H
[ 1948.693] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
[ 1948.693] (II) NOUVEAU(0): Serial No: LFM0C0234040
[ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.693] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 510 x 287 mm
[ 1948.693] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 1948.693] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.693] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 1948.693] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 1948.693] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.693] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 1948.693] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1948.693] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.693] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 1948.693] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 1948.693] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
[ 1948.693] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 1948.693] (II) NOUVEAU(0): h_active: 1920 h_sync: 1972 h_sync_end 2016 h_blank_end 2640 h_border: 0
[ 1948.693] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 1948.693] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 1948.693] (II) NOUVEAU(0): EDID (in hex):
[ 1948.693] (II) NOUVEAU(0): 00ffffffffffff0004729a00c3ab6191
[ 1948.693] (II) NOUVEAU(0): 1013010380331d78ea6085a6564a9c25
[ 1948.693] (II) NOUVEAU(0): 125054b30c008180714f81009500a940
[ 1948.693] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1948.693] (II) NOUVEAU(0): 4500fe1f1100001a000000fc00583233
[ 1948.693] (II) NOUVEAU(0): 33480a20202020202020000000fd0038
[ 1948.693] (II) NOUVEAU(0): 4c1f5312000a202020202020000000ff
[ 1948.693] (II) NOUVEAU(0): 004c464d3043303233343034300a0175
[ 1948.693] (II) NOUVEAU(0): 020322f223097f074e01020384050607
[ 1948.693] (II) NOUVEAU(0): 10111215931f148301000066030c0010
[ 1948.693] (II) NOUVEAU(0): 00108c0ad08a20e02d10103e9600fe1f
[ 1948.693] (II) NOUVEAU(0): 11000018011d007251d01e206e285500
[ 1948.693] (II) NOUVEAU(0): fe1f1100001e011d8018711c1620582c
[ 1948.693] (II) NOUVEAU(0): 2500fe1f1100009e011d00bc52d01e20
[ 1948.693] (II) NOUVEAU(0): b8285540fe1f1100001e011d80d0721c
[ 1948.693] (II) NOUVEAU(0): 1620342c2500fe1f1100009e0000003b
[ 1948.693] (II) NOUVEAU(0): Printing probed modes for output DP-1
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 1972 2016 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1440x576i"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1948.693] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 1948.693] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 1948.693] (II) NOUVEAU(0): Output HDMI-1 connected
[ 1948.693] (II) NOUVEAU(0): Output DP-1 connected
[ 1948.693] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 1948.693] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 1948.693] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1080
[ 1948.693] (II) NOUVEAU(0): Output HDMI-1 using initial mode 1920x1080i
[ 1948.693] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080i
[ 1948.693] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1948.693] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 1948.693] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
[ 1948.693] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.693] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 1948.693] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1948.693] (==) NOUVEAU(0): DPI set to (96, 96)
[ 1948.693] (II) Loading sub module "fb"
[ 1948.693] (II) LoadModule: "fb"
[ 1948.693] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1948.693] (II) Module fb: vendor="X.Org Foundation"
[ 1948.693] compiled for 1.14.5, module version = 1.0.0
[ 1948.693] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1948.693] (II) Loading sub module "exa"
[ 1948.693] (II) LoadModule: "exa"
[ 1948.693] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1948.693] (II) Module exa: vendor="X.Org Foundation"
[ 1948.693] compiled for 1.14.5, module version = 2.6.0
[ 1948.693] ABI class: X.Org Video Driver, version 14.1
[ 1948.693] (II) Loading sub module "shadowfb"
[ 1948.693] (II) LoadModule: "shadowfb"
[ 1948.693] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1948.693] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1948.693] compiled for 1.14.5, module version = 1.0.0
[ 1948.693] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1948.693] (II) Loading sub module "dri2"
[ 1948.693] (II) LoadModule: "dri2"
[ 1948.693] (II) Module "dri2" already built-in
[ 1948.693] (--) NOUVEAU(G0): Chipset: "NVIDIA NV94"
[ 1948.693] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 1948.693] (==) NOUVEAU(G0): RGB weight 888
[ 1948.693] (==) NOUVEAU(G0): Default visual is TrueColor
[ 1948.693] (==) NOUVEAU(G0): Using HW cursor
[ 1948.693] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 1948.693] (==) NOUVEAU(G0): Page flipping enabled
[ 1948.693] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 1948.735] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
[ 1948.758] (II) NOUVEAU(G0): Output DVI-I-1-3 has no monitor section
[ 1948.786] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
[ 1948.786] (II) NOUVEAU(G0): Manufacturer: ACR Model: e3 Serial#: 2247724
[ 1948.786] (II) NOUVEAU(G0): Year: 2010 Week: 2
[ 1948.786] (II) NOUVEAU(G0): EDID Version: 1.3
[ 1948.786] (II) NOUVEAU(G0): Digital Display Input
[ 1948.786] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 1948.786] (II) NOUVEAU(G0): Gamma: 2.20
[ 1948.786] (II) NOUVEAU(G0): DPMS capabilities: StandBy Suspend
[ 1948.786] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1948.786] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 1948.786] (II) NOUVEAU(G0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 1948.786] (II) NOUVEAU(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 1948.786] (II) NOUVEAU(G0): Supported established timings:
[ 1948.786] (II) NOUVEAU(G0): 720x400@70Hz
[ 1948.786] (II) NOUVEAU(G0): 640x480@60Hz
[ 1948.786] (II) NOUVEAU(G0): 640x480@67Hz
[ 1948.786] (II) NOUVEAU(G0): 640x480@72Hz
[ 1948.786] (II) NOUVEAU(G0): 640x480@75Hz
[ 1948.786] (II) NOUVEAU(G0): 800x600@56Hz
[ 1948.786] (II) NOUVEAU(G0): 800x600@60Hz
[ 1948.786] (II) NOUVEAU(G0): 800x600@72Hz
[ 1948.786] (II) NOUVEAU(G0): 800x600@75Hz
[ 1948.786] (II) NOUVEAU(G0): 832x624@75Hz
[ 1948.786] (II) NOUVEAU(G0): 1024x768@60Hz
[ 1948.786] (II) NOUVEAU(G0): 1024x768@70Hz
[ 1948.786] (II) NOUVEAU(G0): 1024x768@75Hz
[ 1948.786] (II) NOUVEAU(G0): 1280x1024@75Hz
[ 1948.786] (II) NOUVEAU(G0): 1152x864@75Hz
[ 1948.786] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 1948.786] (II) NOUVEAU(G0): Supported standard timings:
[ 1948.786] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1948.786] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1948.786] (II) NOUVEAU(G0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 1948.786] (II) NOUVEAU(G0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1948.786] (II) NOUVEAU(G0): #4: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 1948.786] (II) NOUVEAU(G0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1948.786] (II) NOUVEAU(G0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 1948.786] (II) NOUVEAU(G0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1948.786] (II) NOUVEAU(G0): Supported detailed timing:
[ 1948.786] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 1948.786] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1948.786] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1948.786] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 1948.786] (II) NOUVEAU(G0): Monitor name: H233H
[ 1948.786] (II) NOUVEAU(G0): Serial No: LHB0D0228550
[ 1948.786] (II) NOUVEAU(G0): EDID (in hex):
[ 1948.786] (II) NOUVEAU(G0): 00ffffffffffff000472e3002c4c2200
[ 1948.786] (II) NOUVEAU(G0): 0214010380331d78caee95a3544c9926
[ 1948.786] (II) NOUVEAU(G0): 0f5054bfef80714f818081c081008bc0
[ 1948.786] (II) NOUVEAU(G0): 9500b300d1c0023a801871382d40582c
[ 1948.786] (II) NOUVEAU(G0): 4500fe1f1100001e000000fd00384c1f
[ 1948.786] (II) NOUVEAU(G0): 5311000a202020202020000000fc0048
[ 1948.786] (II) NOUVEAU(G0): 323333480a20202020202020000000ff
[ 1948.786] (II) NOUVEAU(G0): 004c48423044303232383535300a0046
[ 1948.786] (II) NOUVEAU(G0): Printing probed modes for output DVI-I-1-2
[ 1948.786] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.786] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1948.809] (II) NOUVEAU(G0): EDID for output DVI-I-1-3
[ 1948.809] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1948.809] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Mode "1360x768": 84.8 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1948.809] (**) NOUVEAU(G0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 1948.809] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1948.809] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 1948.809] (II) Loading sub module "fb"
[ 1948.809] (II) LoadModule: "fb"
[ 1948.809] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1948.809] (II) Module fb: vendor="X.Org Foundation"
[ 1948.809] compiled for 1.14.5, module version = 1.0.0
[ 1948.809] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1948.809] (II) Loading sub module "exa"
[ 1948.809] (II) LoadModule: "exa"
[ 1948.809] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1948.809] (II) Module exa: vendor="X.Org Foundation"
[ 1948.809] compiled for 1.14.5, module version = 2.6.0
[ 1948.809] ABI class: X.Org Video Driver, version 14.1
[ 1948.809] (II) Loading sub module "shadowfb"
[ 1948.809] (II) LoadModule: "shadowfb"
[ 1948.809] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1948.809] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1948.809] compiled for 1.14.5, module version = 1.0.0
[ 1948.809] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1948.809] (--) Depth 24 pixmap format is 32 bpp
[ 1948.810] (II) NOUVEAU(G0): Opened GPU channel 0
[ 1948.816] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 1948.816] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 1948.816] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 1948.817] (II) EXA(256): Driver allocated offscreen pixmaps
[ 1948.817] (II) EXA(256): Driver registered support for the following operations:
[ 1948.817] (II) Solid
[ 1948.817] (II) Copy
[ 1948.817] (II) Composite (RENDER acceleration)
[ 1948.817] (II) UploadToScreen
[ 1948.817] (II) DownloadFromScreen
[ 1948.817] (==) NOUVEAU(G0): Backing store disabled
[ 1948.817] (==) NOUVEAU(G0): Silken mouse enabled
[ 1948.817] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 1948.817] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 1948.817] (==) NOUVEAU(G0): DPMS enabled
[ 1948.817] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1948.820] (II) NOUVEAU(0): Opened GPU channel 0
[ 1948.825] (II) NOUVEAU(0): [DRI2] Setup complete
[ 1948.825] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 1948.825] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 1948.825] (II) EXA(0): Driver allocated offscreen pixmaps
[ 1948.825] (II) EXA(0): Driver registered support for the following operations:
[ 1948.825] (II) Solid
[ 1948.825] (II) Copy
[ 1948.825] (II) Composite (RENDER acceleration)
[ 1948.825] (II) UploadToScreen
[ 1948.825] (II) DownloadFromScreen
[ 1948.825] (==) NOUVEAU(0): Backing store disabled
[ 1948.825] (==) NOUVEAU(0): Silken mouse enabled
[ 1948.825] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 1948.825] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 1948.825] (==) NOUVEAU(0): DPMS enabled
[ 1948.825] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1948.825] (--) RandR disabled
[ 1948.841] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1948.841] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1948.841] (II) AIGLX: enabled GLX_ARB_create_context
[ 1948.841] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1948.841] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1948.841] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1948.841] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1948.842] (II) AIGLX: Loaded and initialized nouveau
[ 1948.842] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1948.844] (II) NOUVEAU(G0): NVEnterVT is called.
[ 1948.845] (II) NOUVEAU(0): NVEnterVT is called.
[ 1948.924] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 1948.924] resize called 1920 1080
[ 1948.961] (II) Using input driver 'mouse' for 'Mouse0'
[ 1948.961] (**) Option "CorePointer" "on"
[ 1948.961] (**) Mouse0: always reports core events
[ 1948.961] (**) Option "Protocol" "auto"
[ 1948.961] (**) Option "Device" "/dev/psaux"
[ 1948.961] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 1948.961] (**) Mouse0: Protocol: "auto"
[ 1948.961] (**) Mouse0: always reports core events
[ 1949.009] (**) Option "Emulate3Buttons" "no"
[ 1949.009] (**) Option "ZAxisMapping" "4 5"
[ 1949.009] (**) Mouse0: ZAxisMapping: buttons 4 and 5
[ 1949.009] (**) Mouse0: Buttons: 9
[ 1949.009] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[ 1949.009] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 1949.009] (**) Mouse0: (accel) acceleration profile 0
[ 1949.010] (**) Mouse0: (accel) acceleration factor: 2.000
[ 1949.010] (**) Mouse0: (accel) acceleration threshold: 4
[ 1949.010] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 1949.302] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 1949.302] (II) Using input driver 'kbd' for 'Keyboard0'
[ 1949.302] (**) Option "CoreKeyboard" "on"
[ 1949.302] (**) Keyboard0: always reports core events
[ 1949.302] (**) Keyboard0: always reports core events
[ 1949.302] (**) Option "Protocol" "standard"
[ 1949.302] (**) Option "XkbRules" "base"
[ 1949.302] (**) Option "XkbModel" "pc105"
[ 1949.302] (**) Option "XkbLayout" "us"
[ 1949.302] (**) Option "XkbOptions" "altwin:ctrl_win"
[ 1949.302] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
[ 1949.312] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1949.312] (II) AutoAddDevices is off - not adding device.
[ 1949.312] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1949.312] (II) AutoAddDevices is off - not adding device.
[ 1949.312] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1949.312] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 1949.312] (II) AutoAddDevices is off - not adding device.
[ 1949.312] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 1949.312] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 1949.313] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device UVC Camera (046d:081a) (/dev/input/event19)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event8)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event7)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event6)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event12)
[ 1949.313] (II) AutoAddDevices is off - not adding device.
[ 1949.314] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[ 1949.314] (II) AutoAddDevices is off - not adding device.
[ 1949.314] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event10)
[ 1949.314] (II) AutoAddDevices is off - not adding device.
[ 1949.314] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event14)
[ 1949.314] (II) AutoAddDevices is off - not adding device.
[ 1949.314] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1949.314] (II) AutoAddDevices is off - not adding device.
[ 1949.314] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 1949.314] (II) AutoAddDevices is off - not adding device.
If I try to start xfce with startx, the Xorg.0.log is as follows:
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2456.395] X Protocol Version 11, Revision 0
[ 2456.395] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2456.395] Current Operating System: Linux Neo 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
[ 2456.395] Kernel command line: root=/dev/sda1 resume=/dev/sdb3 ro init=/usr/lib/systemd/systemd
[ 2456.395] Build Date: 13 December 2013 03:11:42PM
[ 2456.395]
[ 2456.396] Current version of pixman: 0.32.4
[ 2456.396] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2456.396] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2456.397] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 22 20:17:49 2013
[ 2456.397] (==) Using config file: "/etc/X11/xorg.conf"
[ 2456.397] (==) No Layout section. Using the first Screen section.
[ 2456.397] (==) No screen section available. Using defaults.
[ 2456.397] (**) |-->Screen "Default Screen Section" (0)
[ 2456.397] (**) | |-->Monitor "<default monitor>"
[ 2456.397] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2456.397] (**) | |-->Device "Device0"
[ 2456.397] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2456.397] (**) Option "AutoAddDevices" "False"
[ 2456.397] (**) Not automatically adding devices
[ 2456.397] (==) Automatically enabling devices
[ 2456.397] (==) Automatically adding GPU devices
[ 2456.397] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2456.397] Entry deleted from font path.
[ 2456.397] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2456.397] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2456.397] (==) |-->Input Device "Mouse0"
[ 2456.397] (==) |-->Input Device "Keyboard0"
[ 2456.397] (==) No Layout section. Using the first mouse device.
[ 2456.397] (==) No Layout section. Using the first keyboard device.
[ 2456.397] (II) Loader magic: 0x7fec20
[ 2456.397] (II) Module ABI versions:
[ 2456.397] X.Org ANSI C Emulation: 0.4
[ 2456.397] X.Org Video Driver: 14.1
[ 2456.397] X.Org XInput driver : 19.1
[ 2456.397] X.Org Server Extension : 7.0
[ 2456.397] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2456.397] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 2456.549] (--) PCI:*(0:1:0:0) 10de:1187:1458:360b rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 2456.549] (--) PCI: (0:2:0:0) 10de:0622:3842:c858 rev 161, Mem @ 0xf4000000/16777216, 0xd0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 2456.549] Initializing built-in extension Generic Event Extension
[ 2456.549] Initializing built-in extension SHAPE
[ 2456.549] Initializing built-in extension MIT-SHM
[ 2456.549] Initializing built-in extension XInputExtension
[ 2456.550] Initializing built-in extension XTEST
[ 2456.550] Initializing built-in extension BIG-REQUESTS
[ 2456.550] Initializing built-in extension SYNC
[ 2456.550] Initializing built-in extension XKEYBOARD
[ 2456.550] Initializing built-in extension XC-MISC
[ 2456.550] Initializing built-in extension SECURITY
[ 2456.551] Initializing built-in extension XINERAMA
[ 2456.551] Initializing built-in extension XFIXES
[ 2456.551] Initializing built-in extension RENDER
[ 2456.551] Initializing built-in extension RANDR
[ 2456.551] Initializing built-in extension COMPOSITE
[ 2456.551] Initializing built-in extension DAMAGE
[ 2456.552] Initializing built-in extension MIT-SCREEN-SAVER
[ 2456.552] Initializing built-in extension DOUBLE-BUFFER
[ 2456.552] Initializing built-in extension RECORD
[ 2456.552] Initializing built-in extension DPMS
[ 2456.552] Initializing built-in extension X-Resource
[ 2456.553] Initializing built-in extension XVideo
[ 2456.553] Initializing built-in extension XVideo-MotionCompensation
[ 2456.553] Initializing built-in extension XFree86-VidModeExtension
[ 2456.553] Initializing built-in extension XFree86-DGA
[ 2456.553] Initializing built-in extension XFree86-DRI
[ 2456.553] Initializing built-in extension DRI2
[ 2456.553] (II) LoadModule: "glx"
[ 2456.553] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2456.553] (II) Module glx: vendor="X.Org Foundation"
[ 2456.553] compiled for 1.14.5, module version = 1.0.0
[ 2456.553] ABI class: X.Org Server Extension, version 7.0
[ 2456.553] (==) AIGLX enabled
[ 2456.554] Loading extension GLX
[ 2456.554] (II) LoadModule: "nouveau"
[ 2456.554] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 2456.554] (II) Module nouveau: vendor="X.Org Foundation"
[ 2456.554] compiled for 1.14.4, module version = 1.0.10
[ 2456.554] Module class: X.Org Video Driver
[ 2456.554] ABI class: X.Org Video Driver, version 14.1
[ 2456.554] (II) Loa

Nvidia driver causes "INIT: Id "x" respawning too fast"

Similar Messages

Maybe you are looking for